RESUMEN
We address challenges in characterizing changes in permittivity and refractive index beyond standard perturbative methods with special attention given to transparent conductive oxides (TCOs). We unveil a realistic limit to permittivity changes under high optical power densities. Our study covers both slow and ultrafast nonlinearities, demonstrating that all nonlinearities induce refractive index changes accurately described by a simple curve with saturation electric field (or irradiance) and maximum change of permittivity at saturation. Our model, grounded in material properties, like oscillator strength and characteristic times, offers a robust framework for understanding and predicting nonlinear optical phenomena in TCOs and other materials. We differentiate between the significance of higher-order nonlinear susceptibilities in ultrafast and slow nonlinear scenarios. We aim to provide valuable insights for researchers exploring strong light-matter interaction.
RESUMEN
Silicon photonic integrated circuit foundries enable wafer-level fabrication of entire electro-optic systems-on-a-chip for applications ranging from datacommunication to lidar to chemical sensing. However, silicon's indirect bandgap has so far prevented its use as an on-chip optical source for these systems. Here, we describe a fullyintegrated broadband silicon waveguide light source fabricated in a state-of-the-art 300-mm foundry. A reverse-biased p-i-n diode in a silicon waveguide emits broadband near-infrared optical radiation directly into the waveguide mode, resulting in nanowatts of guided optical power from a few milliamps of electrical current. We develop a one-dimensional Planck radiation model for intraband emission from hot carriers to theoretically describe the emission. The brightness of this radiation is demonstrated by using it for broadband characterization of photonic components including Mach-Zehnder interferometers and lattice filters, and for waveguide infrared absorption spectroscopy of liquid-phase analytes. This broadband silicon-based source can be directly integrated with waveguides and photodetectors with no change to existing foundry processes and is expected to find immediate application in optical systems-on-a-chip for metrology, spectroscopy, and sensing.
RESUMEN
We report a femtosecond Kerr-lens mode-locked (KLM) Alexandrite laser resonantly pumped by a 589â nm yellow laser. The 4â nJ pulses as short as 42â fs were obtained corresponding to a peak power of 100â kW. With the repetition rate of 104â MHz, the average power of 420â mW was attained. The time-bandwidth product of generated laser pulse was measured to be 0.324 with a beam quality factor of M2 ≤ 1.13. The exceptional performance of visible femtosecond laser may find potential applications in various fields.
RESUMEN
We demonstrated a compact and power-efficient multi-stage pulsed end-pumped amplifier with stabilized output power of 450â W and near-diffraction-limited beam quality (M2 < 1.2) at a repetition rate of 1â MHz. The pulsed amplifier produced an exceptional average power and optimal beam quality achieved in laser diode (LD) end-pumped Yb:YAG thin rod configuration at room temperature. A preliminary pulse compression with a chirped volume Bragg grating (CVBG) was performed reducing pulse duration to â¼730â fs at a compression efficiency of 90%. With the combined features, including compactness, reliability, and efficiency, of the end-pumped scheme, the demonstrated laser system would be of great value in both industry and scientific research.
RESUMEN
We demonstrate a Ti:Sapphire laser generating in excess of 1.2 W in continuous-wave operation when pumped directly with four green laser diodes eliminating the need for a complex pump laser. As a result, improvement of laser efficiency is achieved without sacrificing beam quality. Tunability within the range of 740-840â nm is attained validating the concept of a direct laser-diode pumped Ti:Sapphire laser.
RESUMEN
Monolayer transition metal dichalcogenides (TMDCs), like MoS2, MoSe2, WS2, and WSe2, feature direct bandgaps, strong spin-orbit coupling, and exciton-polariton interactions at the atomic scale, which could be harnessed for efficient light emission, valleytronics, and polaritonic lasing, respectively. Nevertheless, to build next-generation photonic devices that make use of these features, it is first essential to model the all-optical control mechanisms in TMDCs. Herein, a simple model is proposed to quantify the performance of a 35-µm-long Si3N4 waveguide-integrated all-optical MoSe2 modulator. Using this model, a switching energy of 14.6â pJ is obtained for a transverse-magnetic (TM) and transverse-electric (TE) polarized pump signals at λ = 480 nm. Moreover, maximal extinction ratios of 20.6â dB and 20.1â dB are achieved for a TM and TE polarized probe signal, respectively, at λ = 500 nm with an ultra-low insertion loss of <0.3â dB. Moreover, the device operates with an ultrafast recovery time of 50â ps, while maintaining a high extinction ratio for practical applications. These findings facilitate modeling and designing novel TMDC-based photonic devices.
RESUMEN
We study theoretically and experimentally the nonlinear THz emission from plasmonic metasurfaces and show that a thin indium-tin oxide (ITO) film significantly affects the nonlinear dynamics of the system. Specifically, the presence of the ITO film leads to 2 orders of magnitude stronger THz emission compared to a metasurface on glass. It also shows a different power law, signifying different dominant emission mechanisms. In addition, we find that the hot-electron dynamics in the system strongly modify the coupling between the plasmonic metasurface and the free electrons in the ITO at the picosecond time scale. This results in striking dynamic THz emission phenomena that were not observed to date. Specifically, we show that the generated THz pulse can be shortened in time and thus broadened in frequency with twice the bandwidth compared to previous studies and to an uncoupled system. Our findings open the door to design efficient and dynamic metasurface THz emitters.
RESUMEN
Layered van der Waals materials allow creating unique atomic-void channels with subnanometer dimensions. Coupling light into these channels may further advance sensing, quantum information, and single molecule chemistries. Here, we examine theoretically limits of light guiding in atomic-void channels and show that van der Waals materials exhibiting strong resonances, excitonic and polaritonic, are ideally suited for deeply subwavelength light guiding. We predict that excitonic transition metal dichalcogenides can squeeze >70% of optical power in just <λ/100 thick channel in the visible and near-infrared. We also show that polariton resonances of hexagonal boron nitride allow deeply subwavelength (<λ/500) guiding in the mid-infrared. We further reveal effects of natural material anisotropy and discuss the influence of losses. Such van der Waals channel waveguides while offering extreme optical confinement exhibit significantly lower loss compared to plasmonic counterparts, thus paving the way to low-loss and deeply subwavelength optics.
RESUMEN
Graphene has emerged as an ultrafast photonic material for on-chip all-optical switching applications. However, its atomic thickness limits its interaction with guided optical modes, resulting in a high switching energy per bit. Herein, we propose a novel technique to electrically control the switching energy of an all-optical graphene switch on a silicon nitride waveguide. Using this technique, we theoretically demonstrate a 120â µm long all-optical graphene switch with an 8.9â dB extinction ratio, 2.4â dB insertion loss, a switching time of <100â fs, a fall time of <5â ps, and a 235â fJ switching energy at 2.5â V bias, where the applied voltage reduces the switching energy by â¼16×. This technique paves the way for the emergence of ultra-efficient all-optical graphene switches that will meet the energy demands of next-generation photonic computing systems, and it is a promising alternative to lossy plasmon-enhanced devices.
RESUMEN
The Landau damping (LD) mechanism of the localized surface plasmon (LSP) decay is studied for the hybrid nanoplasmonic (metal core/dielectric shell) structures. It is shown that LD in hybrid structures is strongly affected by the permittivity and the electron effective mass in the dielectric shell in accordance with previous observations by Kreibig, and the strength of LD can be enhanced by an order of magnitude for some combinations of permittivity and effective mass. The physical reason for this effect is identified as an electron spillover into the dielectric where the electric field is higher than that in the metal and the presence of quasi-discrete energy levels in the dielectric. The theory indicates that the transition absorption at the metal-dielectric interface is a dominant contribution to LD in such hybrid structures. Thus, by judicious selection of dielectric material and its thickness, one can engineer decay rates and hot carrier production for important applications, such as photodetection and photochemistry.
RESUMEN
A practical, broadband, all-optical linearization concept for a Mach-Zehnder modulator (MZM) is proposed and demonstrated. The unique transmitter design includes an amplitude modulated (AM) standard MZM with two optical outputs, where the alternative (or complimentary) output is combined with the laser carrier to create a linearizing optical local oscillator, which when coherently combined with the AM signal fully cancels 3rd order intermodulation distortion components. Using this scheme, record linearity is achieved for a non-amplified RF photonic link, with spurious free dynamic range (SFDR) of 118.5 dB.Hz2/3 and 123 dB.Hz2/3 for single and dual fiber/photodetector schemes.
RESUMEN
Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines the high group-index in hybrid plasmonic with nanoscale optical modes. Following this design paradigm, here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometric modulator, exhibiting a high efficiency signified by a miniscule VπL of 95 V µm, deploying a one-micrometer compact electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics. Furthermore we show, that this device paradigm enables spectrally broadband operation across the entire telecommunication near infrared C-band. Such sub-wavelength short efficient and fast modulators monolithically integrated into Silicon platform open up new possibilities for high-density photonic circuitry, which is critical for high interconnect density of photonic neural networks or applications in GHz-fast optical phased-arrays, for example.
RESUMEN
We introduce a new, to the best of our knowledge, passive technique of mitigating the phase noise in optical frequency combs (FC) by reducing the drift of offset frequency. This can be achieved by customizing the dispersion to attain a power law dependence of the wave vector on frequency, k(ω)â¼ωα, ensuring a constant ratio between group and phase velocities. When this condition is maintained, the drift offset frequency is passively mitigated, and phase noise is reduced. Using quantum cascade laser (QCL) FCs as an example, we demonstrate, analytically and numerically, that the desired dispersion can be easily engineered by properly adjusting the thickness of the QCL active region and that stable offset frequency can be combined with low residual group dispersion.
RESUMEN
We investigate a waveguide-integrated plasmonic graphene photodetector operating based on the hot carrier photo-bolometric effect, which is characterized simultaneously by high responsivity on the scale of hundreds of A/W and high speed on the scale of 100's of GHz that is limited only by the product of the electronic heat capacitance and thermal resistance. We develop a theory of the bolometric effect originating from the band nonparabolicity of graphene and estimate responsivity due to the bolometric effect, which is shown to significantly surpass the responsivity of the coexisting photoconductive effect, thus convincingly demonstrating the dominance of the bolometric effect. Based on the theory, we propose a novel detector configuration based on a hybrid waveguide that allows for efficient absorption in graphene over a short distance and subsequently a large change of conductivity. The results demonstrate the potential of graphene for high-speed communication systems.
RESUMEN
We study experimentally the effect of oxide removal on the sub-bandgap photodetection in silicon waveguides at the telecom wavelength regime. Depassivating the device allows for the enhancement of the quantum efficiency by about 2-3 times. Furthermore, the propagation loss within the device is significantly reduced by the oxide removal. Measuring the device 60 days after the depassivation shows slight differences. We provide a possible explanation for these observations. Clearly, passivation and depassivation play an essential role in the design and the implementation of such sub-bandgap photodetector devices for applications such as on-chip light monitoring.
RESUMEN
Two-dimensional layered materials (2DLMs) have been extensively studied in a variety of planar optoelectronic devices. Three-dimensional (3D) optoelectronic structures offer unique advantages including omnidirectional responses, multipolar detection, and enhanced light-matter interactions. However, there has been limited success in transforming monolayer 2DLMs into reconfigurable 3D optoelectronic devices due to challenges in microfabrication and integration of these materials in truly 3D geometries. Here, we report an origami-inspired self-folding approach to reversibly transform monolayer molybdenum disulfide (MoS2) into functional 3D optoelectronic devices. We pattern and integrate monolayer MoS2 and gold (Au) onto differentially photo-cross-linked thin polymer (SU8) films. The devices reversibly self-fold due to swelling gradients in the SU8 films upon solvent exchange. We fabricate a wide variety of optically active 3D MoS2 microstructures including pyramids, cubes, flowers, dodecahedra, and Miura-oris, and we simulate the self-folding mechanism using a coarse-grained mechanics model. Using finite-difference time-domain (FDTD) simulation and optoelectronic characterization, we demonstrate that the 3D self-folded MoS2 structures show enhanced light interaction and are capable of angle-resolved photodetection. Importantly, the structures are also reversibly reconfigurable upon solvent exchange with high tunability in the optical detection area. Our approach provides a versatile strategy to reversibly configure 2D materials in 3D optoelectronic devices of broad relevance to flexible and wearable electronics, biosensing, and robotics.
RESUMEN
A physically transparent unified theory of optically- and plasmon-induced hot carrier generation in metals is developed with all of the relevant mechanisms included. Analytical expressions that estimate the carrier generation rates and their locations, energies and directions of motion are obtained. Among the four mechanisms considered: interband absorption, phonon and defect assisted absorption, electron-electron scattering assisted absorption and surface-collision assisted absorption (Landau damping), it is the last one that generates hot carriers, which are most useful for practical applications in photodetection and photocatalysis.
RESUMEN
Radiation balanced lasing (RBL) is an attractive pathway towards the development of high power and good beam quality lasers because heat removal via anti-Stokes luminescence (optical refrigeration) does not require additional connections and components and the heat is dissipated away from the active medium. Optical refrigeration had been demonstrated in the rare-earth doped laser medium but is far more difficult to achieve it in semiconductors laser medium. The main obstacle to achieve RBL in semiconductors is that the most efficient cooling occurs at relatively low carrier densities, while the gain required to sustain laser operation occurs at much higher densities. In this study, we explore the means of resolving this conundrum by separating the optical refrigeration and lasing in temporal, spatial, and/or spectral domains. Time multiplexing involves modulating the pump and operating the laser in pulse modes with lasing and cooling intervals. Space multiplexing involves having separate regions (quantum wells and dots) for lasing and cooling. The spectral multiplexing involves operating with two separate pumps - one for lasing and one for cooling. These methods will be compared in the study with the goal of selecting the optimal path RBL in semiconductor lasers.
RESUMEN
The ability to concentrate the electrical field into sub-wavelength volumes is a key benefit sought and, to a certain degree, found within the discipline of plasmonics. This ability is restricted only by the ohmic loss in noble metals and, recently, in the infrared region, metals are beginning to face a challenge from emerging alternative media: phononic (i.e., relying on surface phonon polaritons) and photonic (i.e., relying on high refractive index) all-dielectric structures, and highly doped semiconductors, all of them having smaller intrinsic loss than metals. In this Letter, we compare the degree of enhancement and its spectral selectivity for different media and confirm that, while one can obtain sharper resonant features with all-dielectric structures, the magnitude of the field enhancement is invariably higher with metals such as gold and copper, primarily due to a higher density of electrons. On the whole, depending on the application, metals and dielectrics have their own unique advantages.