End-point rapid detection of total and pathogenic Vibrio parahaemolyticus (tdh+ and/or trh1+ and/or trh2+) in raw seafood using a colorimetric loop-mediated isothermal amplification-xylenol orange technique.

Background: Vibrio parahaemolyticus is the leading cause of bacterial seafood-borne gastroenteritis in humans worldwide. To ensure seafood safety and to minimize the occurrence of seafood-borne diseases, early detection of total V. parahaemolyticus (pathogenic and non-pathogenic strains) and pathogenic V. parahaemolyticus (tdh+ and/or trh1+ and/or trh2+) is required. This study further improved a loop-mediated isothermal amplification (LAMP) assay using xylenol orange (XO), a pH sensitive dye, to transform conventional LAMP into a one-step colorimetric assay giving visible results to the naked eye. LAMP-XO targeted rpoD for species specificity and tdh, trh1, and trh2 for pathogenic strains. Multiple hybrid inner primers (MHP) of LAMP primers for rpoD detection to complement the main primer set previously reported were designed by our group to maximize sensitivity and speed. Methods: Following the standard LAMP protocol, LAMP reaction temperature for rpoD, tdh, trh1, and trh2 detection was first determined using a turbidimeter. The acquired optimal temperature was subjected to optimize six parameters including dNTP mix, betaine, MgSO4, Bst 2.0 WarmStart DNA polymerase, reaction time and XO dye. The last parameter was done using a heat block. The color change of the LAMP-XO result from purple (negative) to yellow (positive) was monitored visually. The detection limits (DLs) of LAMP-XO using a 10-fold serial dilution of gDNA and spiked seafood samples were determined and compared with standard LAMP, PCR, and quantitative PCR (qPCR) assays. Subsequently, the LAMP-XO assay was validated with 102 raw seafood samples and the results were compared with PCR and qPCR assays. Results: Under optimal conditions (65 °C for 75 min), rpoD-LAMP-XO and tdh-LAMP-XO showed detection sensitivity at 102 copies of gDNA/reaction, or 10 folds greater than trh1-LAMP-XO and trh2-LAMP-XO. This level of sensitivity was similar to that of standard LAMP, comparable to that of the gold standard qPCR, and 10-100 times higher than that of PCR. In spiked samples, rpoD-LAMP-XO, tdh-LAMP-XO, and trh2-LAMP-XO could detect V. parahaemolyticus at 1 CFU/2.5 g spiked shrimp. Of 102 seafood samples, LAMP-XO was significantly more sensitive than PCR (P < 0.05) for tdh and trh2 detection and not significantly different from qPCR for all genes determined. The reliability of tdh-LAMP-XO and trh2-LAMP-XO to detect pathogenic V. parahaemolyticus was at 94.4% and 100%, respectively. Conclusions: To detect total and pathogenic V. parahaemolyticus, at least rpoD-LAMP-XO and trh2-LAMP-XO should be used, as both showed 100% sensitivity, specificity, and accuracy. With short turnaround time, ease, and reliability, LAMP-XO serves as a better alternative to PCR and qPCR for routine detection of V. parahaemolyticus in seafood. The concept of using a one-step LAMP-XO and MHP-LAMP to enhance efficiency of diagnostic performance of LAMP-based assays can be generally applied for detecting any gene of interest.

One-step colorimetric isothermal detection of COVID-19 with AI-assisted automated result analysis: A platform model for future emerging point-of-care RNA/DNA disease diagnosis.

Colorimetric loop-mediated DNA isothermal amplification-based assays have gained momentum in the diagnosis of COVID-19 owing to their unmatched feasibility in low-resource settings. However, the vast majority of them are restricted to proprietary pH-sensitive dyes that limit downstream assay optimization or hinder efficient result interpretation. To address this problem, we developed a novel dual colorimetric RT-LAMP assay using in-house pH-dependent indicators to maximize the visual detection and assay simplicity, and further integrated it with the artificial intelligence (AI) operated tool (RT-LAMP-DETR) to enable a more precise and rapid result analysis in large scale testing. The dual assay leverages xylenol orange (XO) and a newly formulated lavender green (LG) dye for distinctive colorimetric readouts, which enhance the test accuracy when performed and analyzed simultaneously. Our RT-LAMP assay has a detection limit of 50 viral copies/reaction with the cycle threshold (Ct) value ≤ 39.7 ± 0.4 determined by the WHO-approved RT-qPCR assay. RT-LAMP-DETR exhibited a complete concordance with the results from naked-eye observation and RT-qPCR, achieving 100% sensitivity, specificity, and accuracy that altogether render it suitable for ultrasensitive point-of-care COVID-19 screening efforts. From the perspective of pandemic preparedness, our method offers a simpler, faster, and cheaper (∼$8/test) approach for COVID-19 testing and other emerging pathogens with respect to RT-qPCR.

Rapid and simultaneous detection of Campylobacter spp. and Salmonella spp. in chicken samples by duplex loop-mediated isothermal amplification coupled with a lateral flow biosensor assay.

Development of a simple, rapid and specific assay for the simultaneous detection of Campylobacter spp. and Salmonella spp. based on duplex loop-mediated isothermal amplification (d-LAMP), combined with lateral-flow biosensor (LFB) is reported herein. LAMP amplicons of both pathogens were simultaneously amplified and specifically differentiated by LFB. The specificity of the d-LAMP-LFB was evaluated using a set of 68 target and 12 non-target strains, showing 100% inclusivity and exclusivity. The assay can simultaneously detect Campylobacter and Salmonella strains as low as 1 ng and 100 pg genomic DNA per reaction, respectively. The lowest inoculated detection limits for Campylobacter and Salmonella species in artificially contaminated chicken meat samples were 103 CFU and 1 CFU per 25 grams, respectively, after enrichment for 24 h. Furthermore, compared to culture-based methods using field chicken meat samples, the sensitivity, specificity and accuracy of d-LAMP- LFB were 95.6% (95% CI, 78.0%-99.8%), 71.4% (95% CI, 29.0%-96.3%) and 90.0% (95% CI, 73.4%-97.8%), respectively. The developed d-LAMP-LFB assay herein shows great potentials for the simultaneous detection of the Campylobacter and Salmonella spp. and poses a promising alternative approach for detection of both pathogens with applications in food products.

Reverse transcription loop-mediated isothermal amplification (RT-LAMP) combined with colorimetric gold nanoparticle (AuNP) probe assay for visual detection of tilapia lake virus (TiLV) in Nile and red hybrid tilapia.

Tilapia is one of the major aquaculture species with a global economic significance. Despite a high scale of production worldwide, mortality in many tilapia cultures has recently become a problem concerned with not only intensive farming but also the prevalence of infectious pathogens. Tilapia lake virus (TiLV) has emerged as a serious single-stranded RNA disease agent that thus far has continued to cause a number of incidences across the continents. Conventional PCR-based molecular detection techniques, despite having high sensitivity for TiLV, are not best suited for the onsite identification of infected fish mainly due to their requirement of laboratory resources and extended assay turnaround time. To address this practical limitation, we have developed a novel colorimetric assay based on reverse transcription-loop-mediated isothermal amplification (RT-LAMP) and gold nanoparticle (AuNP)-labelled oligonucleotide reporter probe targeting the viral genomic segment 9 that enables the assay to be completed within an hour. This technique has been shown to be compatible with a rapid nucleic extraction method that does not demand centrifugation steps or any benchtop laboratory equipment. When validated with field-acquired tilapia samples, our RT-LAMP-AuNP assay exhibited a near-perfect agreement with the semi-nested RT-PCR assay recommended by OIE with Cohen's κ coefficient of .869, yet requiring significantly less time to perform.

Sensitivity Validation of EWOD Devices for Diagnosis of Early Mortality Syndrome (EMS) in Shrimp Using Colorimetric LAMP-XO Technique.

Electrowetting-on-dielectric (EWOD) is a microfluidic technology used for manipulating liquid droplets at microliter to nanoliter scale. EWOD has the ability to facilitate the accurate manipulation of liquid droplets, i.e., transporting, dispensing, splitting, and mixing. In this work, EWOD fabrication with suitable and affordable materials is proposed for creating EWOD lab-on-a-chip platforms. The EWOD platforms are applied for the diagnosis of early mortality syndrome (EMS) in shrimp by utilizing the colorimetric loop-mediated isothermal amplification method with pH-sensitive xylenol orange (LAMP-XO) diagnosis technique. The qualitative sensitivity is observed by comparing the limit of detection (LOD) while performing the LAMP-XO diagnosis test on the proposed lab-on-a-chip EWOD platform, alongside standard LAMP laboratory tests. The comparison results confirm the reliability of EMS diagnosis on the EWOD platform with qualitative sensitivity for detecting the EMS DNA plasmid concentration at 102 copies in a similar manner to the common LAMP diagnosis tests.

Specific and sensitive, ready-to-use universal fungi detection by visual color using ITS1 loop-mediated isothermal amplification combined hydroxynaphthol blue.

Being ubiquitous, fungi are common opportunistic pathogens to humans that can lead to invasive and life-threatening infections in immunocompromised individuals. Eukaryote-resembling cell membrane and filamentous branches make the fungal diagnosis difficult. This study therefore developed a ready-to-use ITS1 loop-mediated isothermal amplification combined with hydroxynaphthol blue (LAMP-HNB) for rapid, sensitive and specific colorimetric detection of universal fungi in all phyla. The ITS1 LAMP-HNB could identify every evolutionary phylum of fungi according to sequence analyses. We tested a total of 30 clinically relevant fungal isolates (representing three major human pathogenic phyla of fungi, namely Zygomycota, Ascomycota and Basidiomycota) and 21 non-fungal isolates, and the ITS1 LAMP-HNB properly identified all isolates, with a detection limit of as low as 4.6 ag (9.6 copies), which was identical to ITS1 and 18S rDNA PCR. The assays were also validated on the feasibility of point-of-care diagnostic with real food (dry peanuts, chili and garlics) and blood samples. Furthermore, the shelf life of our ready-to-use ITS1 LAMP activity (≥50%) was more than 40 days at 30 °C with 3-5% polyvinyl alcohol or glycerol additive. The results supported the ready-to-use ITS1 LAMP-HNB for simple detection of fungi contamination with high sensitivity in local and resource-constrained areas to prevent opportunistic fungal species infections.

Rapid detection of Clostridium perfringens in food by loop-mediated isothermal amplification combined with a lateral flow biosensor.

Clostridium perfringens is a key anaerobic pathogen causing food poisoning. Definitive detection by standard culture method is time-consuming and labor intensive. Current rapid commercial test kits are prohibitively expensive. It is thus necessary to develop rapid and cost-effective detection tool. Here, loop-mediated isothermal amplification (LAMP) in combination with a lateral-flow biosensor (LFB) was developed for visual inspection of C. perfringens-specific cpa gene. The specificity of the developed test was evaluated against 40 C. perfringens and 35 other bacterial strains, which showed no cross-reactivity, indicating 100% inclusivity and exclusivity. LAMP-LFB detection limit for artificially contaminated samples after enrichment for 16 h was 1-10 CFU/g sample, which was comparable to the commercial real-time PCR kit. The detection performance of LAMP-LFB was also compared to culture-based method using 95 food samples, which revealed the sensitivity (SE), specificity (SP) and Cohen's kappa coefficient (κ) of 88.0% (95% CI, 75.6%-95.4%), 95.5% (95% CI, 84.8%-99.4%) and 0.832 (95% CI, 0.721-0.943), respectively. Area under the receiver operating characteristic (ROC) curve was 0.918 (95% CI, 0.854-0.981), indicating LAMP-LFB as high relative accuracy test. In conclusion, LAMP-LFB assay is a low-cost qualitative method and easily available for routine detection of C. perfringens in food samples, which could serve as an alternative to commercial test kit.

Ultrasensitive detection of Mycobacterium tuberculosis by a rapid and specific probe-triggered one-step, simultaneous DNA hybridization and isothermal amplification combined with a lateral flow dipstick.

Mycobacterium tuberculosis (Mtb) is an insidious scourge that has afflicted millions of people worldwide. Although there are many rapid methods to detect it based on loop-mediated isothermal amplification (LAMP) and a lateral flow dipstick (LFD), this study made further improvements using a new set of primers to enhance LAMP performance and a novel DNA probe system to simplify detection and increase specificity. The new probe system eliminates the post-LAMP hybridization step typically required for LFD assays by allowing co-hybridization and amplification of target DNA in one reaction while preventing self-polymerization that could lead to false-positive results. The improved assay was named Probe-Triggered, One-Step, Simultaneous DNA Hybridization and LAMP Integrated with LFD (SH-LAMP-LFD). SH-LAMP-LFD was simpler to perform and more sensitive than previously reported LAMP-LFD and PCR methods by 100 and 1000 times, respectively. It could detect a single cell of Mtb. The absence of cross-reactivity with 23 non-TB bacteria, and accurate test results with all 104 blind clinical samples have highlighted its accuracy. Its robustness and portability make SH-LAMP-LFD suitable for users in both low and high resource settings.

Graphene-based electrochemical genosensor incorporated loop-mediated isothermal amplification for rapid on-site detection of Mycobacterium tuberculosis.

Tuberculosis (TB) is one of the most contagious and lethal infectious diseases that affects more than 10 million individuals worldwide. A lack of rapid TB diagnosis is partly responsible for its alarming spread and prevalence in many regions. To address this problem, we report a novel integrated point-of-care platform to detect a TB-causative bacterium, Mycobacterium tuberculosis (Mtb). This leverages loop-mediated isothermal amplification (LAMP) for Mtb-DNA amplification and the screen-printed graphene electrode (SPGE) for label-free electrochemical analysis of DNA amplicons. When implemented on a portable potentiostat device developed in-house, the system (LAMP-EC) offers a rapid end-point qualitative analysis of specific DNA amplicons that will be displayed as a discrete positive/negative readout on the LCD screen. Under optimized conditions, LAMP-EC showed a comparable detection limit to the previously developed LAMP assay with a lateral flow readout at 1 pg total DNA or 40 Mtb genome equivalents. This highly specific technique detected the presence of TB in all 104 blinded sputum samples with a 100% accuracy. Our technique can also easily be clinically adopted due to its affordability (∼USD2.5/test), rapidity (<65 min turnaround time) and feasibility (lack of advanced instrumental requirement). This serves as a practical incentive, appealing to users in both high- and low-resource settings across the TB endemic regions and economic backgrounds.

Point-of-care rapid detection of Vibrio parahaemolyticus in seafood using loop-mediated isothermal amplification and graphene-based screen-printed electrochemical sensor.

Vibrio parahaemolyticus is one of the most important foodborne pathogens that cause various life-threatening diseases in human and animals. Here, we present a rapid detection platform for V. parahaemolyticus by combining loop-mediated isothermal amplification (LAMP) and disposable electrochemical sensors based on screen-printed graphene electrodes (SPGEs). The LAMP reactions using primers targeting V. parahaemolyticus toxR gene were optimized at an isothermal temperature of 65 °C, providing specific detection of V. parahaemolyticus within 45 min at the detection limit of 0.3 CFU per 25 g of raw seafood. The LAMP amplicons can be effectively detected using unmodified SPGEs, redox active molecules namely Hoechst-33258 and a portable potentiostat. Therefore, the proposed system is particularly suitable as a point-of-care device for on-site detection of foodborne pathogens.

Multiplex PCR assay and lyophilization for detection of Salmonella spp., Staphylococcus aureus and Bacillus cereus in pork products.

Multiplex PCR (m-PCR) has the potential for more rapid detection of pathogens compared to simple PCR through the simultaneous amplification of multiple gene targets using several sets of specific primers. Here, we developed an m-PCR assay which combined dry reagent mixtures for ready-to-use simultaneous detection of Salmonella spp., Bacillus cereus, and Staphylococcus aureus. The assay did not show cross-reactivity with several common bacterial pathogens and the detection limit was 103 CFU/mL for mixed genomic DNA in pure culture. Lyophilized m-PCR reagents are stable for 2 months stored at 4 °C and for 1 month stored at 25 °C. Detection sensitivities of both dry and fresh mixes were able to simultaneously detect 10 CFU/mL of each pathogen in artificially inoculated samples after enrichment for 6 and 12 h. Results demonstrated that this method is both sensitive and specific and can be used for rapid detection and differentiation of foodborne diseases.

Detection assay for HPV16 and HPV18 by loop­mediated isothermal amplification with lateral flow dipstick tests.

Cervical cancer is the third highest cause of death in developing countries and most commonly results from high­risk human papillomavirus (HR­HPV) infection. Among HR­HPV genotypes, HPV16 and HPV18 are the most prevalent in cervical cancers. Therefore, the present study aimed to develop a detection assay for HPV16 and HPV18 infection using loop­mediated isothermal amplification (LAMP) with lateral flow dipstick (LFD) tests. This assay is a simplified, user­friendly method for the visual detection of HPV genotypes. DNA was extracted from clinical tissue samples, and HPV genotyping was performed using nested polymerase chain reaction (PCR). The clinical samples were demonstrated to include 44 HPV16­positive, 18 HPV18­positive and 80 HPV­negative samples. All DNA samples were also used as templates for a LAMP reaction (30 min at 65˚C), and subsequently, a fluorescein isothiocyanate­labelled probe was hybridized with the reaction product. Finally, the LFD test was performed. The sensitivity of the LAMP­LFD test was higher than LAMP­turbidity, exhibiting up to 100­fold higher sensitivity for HPV16 and 10­fold higher sensitivity for HPV18. All HPV16 and HPV18­positive samples generated positive results in both assays; however, 22 samples detected as HPV­negative by LAMP­turbidity exhibited positive results by LAMP­LFD test (22 of 80 samples). Therefore, these samples were further examined using quantitative (q)PCR. The results demonstrated that 20 out of the 22 samples designated positive by LAMP­LFD, but negative by LAMP turbidity, gave a positive result with qPCR, while the remaining 2 samples were negative by qPCR. The present results suggested that LAMP­LFD provided higher sensitivity than LAMP­turbidity and nested PCR. Thus, the LAMP­LFD test developed in the present study might be useful for the detection of HPV16 and HPV18 in local hospitals.

Loop-Mediated Isothermal Amplification and LFD Combination for Detection of Plasmodium falciparum and Plasmodium vivax.

Loop-mediated isothermal amplification (LAMP) has been used to detect several pathogens including malaria parasites from field and clinical samples. In this protocol, the malaria LAMP technology is developed to differentiate between Plasmodium falciparum (Pf) and Plasmodium vivax (Pv) species by targeting the dihydrofolate reductase thymidylate synthase (dhfr-ts) gene, a known target for the antifolate class of drugs such as Pyrimethamine. LAMP primer sets are designed and validated for species specific amplification. Additionally, specific probes help improve detection and visualization of the products when combined with lateral flow dipstick-based (LFD) detection. The protocols are further simplified to eliminate tedious sample preparation steps, such that crude lysis prepared simply by diluting few microliter (µL) of blood sample with distilled water is sufficient. The LAMP-LFD malaria dhfr-ts protocols are sensitive and can detect as little as 1 picogram (pg) of PfDNA and 1 nanogram (ng) of PvDNA, or a few microliters of crude lysate from infected blood samples (Yongkiettrakul et al., Parasitol Int 63: 777-784, 2014). These simplified steps not only reduce cost but also increase the potential for large application in the fields and clinical settings.

Simple detection of single nucleotide polymorphism in Plasmodium falciparum by SNP-LAMP assay combined with lateral flow dipstick.

The significant strides made in reducing global malaria burden over the past decades are being threatened by the emergence of multi-drug resistant malaria. Mechanisms of resistance to several classes of antimalarial drugs have been linked to key mutations in the Plasmodium falciparum genes. Pyrimethamine targets the dihydrofolate reductase of the bifunctional dihydrofolate reductase thymidylate synthase (DHFR-TS), and specific point mutations in the dhfr-ts gene have been assigned to resistant phenotypes. Several molecular methods are available to detect the mutant genotypes including DNA sequencing and PCR-based methods. In this study, we report the development of PfSNP-LAMP to detect nucleotide polymorphism in the dhfr gene associated with N51I mutation and antifolate resistance. The PfSNP-LAMP method was validated with genomic DNA samples and parasite lysates prepared from sensitive and pyrimethamine resistant strains of P. falciparum.

High sensitivity, loop-mediated isothermal amplification combined with colorimetric gold-nanoparticle probes for visual detection of high risk human papillomavirus genotypes 16 and 18.

High-risk human papillomavirus (HR-HPV) causes cervical cancer. HPV16 and HPV18 are the most prevalent strains of the virus reported in women worldwide. Loop-mediated isothermal amplification (LAMP) is an alternative method for DNA detection under isothermal conditions. However, it results in a turbid amplified product which is not easily detected by the naked eye. This study aimed to develop an improved technique by using gold nanoparticles (AuNPs) attached to a single-stranded DNA probe for the detection of HPV16 and HPV18. Detection of the LAMP product by AuNP color change was compared with detection by visual turbidity. The optimal conditions for this new LAMP-AuNP assay were an incubation time of 20min and a temperature of 65°C. After LAMP amplification was complete, its products were hybridized with the AuNP probe for 5min and then detected by the addition of magnesium salt. The color changed from red to blue as a result of aggregation of the AuNP probe under high ionic strength conditions produced by the addition of the salt. The sensitivity of the LAMP-AuNP assay was greater than the LAMP turbidity assay by up to 10-fold for both HPV genotypes. The LAMP-AuNP assay showed higher sensitivity and ease of visualization than did the LAMP turbidity for the detection of HPV16 and HPV18. Additionally, AuNP-HPV16 and AuNP-HPV18 probes were stable for over 1year. The combination of LAMP and the AuNP-probe colorimetric assay offers a simple, rapid and highly sensitive alternative diagnostic tool for the detection of HPV16 and HPV18 in district hospitals or field studies.

Sensitive Visual Detection of AHPND Bacteria Using Loop-Mediated Isothermal Amplification Combined with DNA-Functionalized Gold Nanoparticles as Probes.

Acute hepatopancreatic necrosis disease (AHPND) is a component cause of early mortality syndrome (EMS) of shrimp. In 2013, the causative agent was found to be unique isolates of Vibrio parahaemolyticus (VPAHPND) that contained a 69 kbp plasmid (pAP1) carrying binary Pir-like toxin genes PirvpA and PirvpB. In Thailand, AHPND was first recognized in 2012, prior to knowledge of the causative agent, and it subsequently led to a precipitous drop in shrimp production. After VPAHPND was characterized, a major focus of the AHPND control strategy was to monitor broodstock shrimp and post larvae for freedom from VPAHPND by nucleic acid amplification methods, most of which required use of expensive and sophisticated equipment not readily available in a shrimp farm setting. Here, we describe a simpler but equally sensitive approach for detection of VPAHPND based on loop-mediated isothermal amplification (LAMP) combined with unaided visual reading of positive amplification products using a DNA-functionalized, ssDNA-labled nanogold probe (AuNP). The target for the special set of six LAMP primers used was the VPAHPND PirvpA gene. The LAMP reaction was carried out at 65°C for 45 min followed by addition of the red AuNP solution and further incubation at 65°C for 5 min, allowing any PirvpA gene amplicons present to hybridize with the probe. Hybridization protected the AuNP against aggregation, so that the solution color remained red upon subsequent salt addition (positive test result) while unprotected AuNP aggregated and underwent a color change from red to blue and eventually precipitated (negative result). The total assay time was approximately 50 min. The detection limit (100 CFU) was comparable to that of other commonly-used methods for nested PCR detection of VPAHPND and 100-times more sensitive than 1-step PCR detection methods (104 CFU) that used amplicon detection by electrophoresis or spectrophotometry. There was no cross reaction with DNA templates derived from non-AHPND bacteria commonly found in shrimp ponds (including other Vibrio species). The new method significantly reduced the time, difficulty and cost for molecular detection of VPAHPND in shrimp hatchery and farm settings.

Hemoculture and Direct Sputum Detection of mecA-Mediated Methicillin-Resistant Staphylococcus aureus by Loop-Mediated Isothermal Amplification in Combination With a Lateral-Flow Dipstick.

This study reports loop-mediated isothermal amplification (LAMP) for rapid detection of methicillin-resistant Staphylococcus aureus from direct clinical specimens. Four primers including outer and inner primers were specifically designed on the two target sequences-femB to identify S. aureus and mecA to identify antibiotic-resistant gene. Reference strains including various species of gram-positive/gram-negative isolates were used to evaluate and optimize LAMP assays. The optimum LAMP condition was found at 63°C within 70 min assay time (include hybridization with FITC probe for 5 min and further 5 min for reading the results on the lateral flow dipstick). The detection limits of LAMP for mecA was 10 pg of total DNA or 100 CFU/ml. The LAMP assays were applied to a total of 155 samples of direct DNA extraction from sputum and hemoculture bottles. The sensitivity of LAMP for mecA detection in sputum and hemoculture bottles was 93.3% (28/30) and 100% (52/52), respectively. In conclusion, LAMP assay is an alternative technique for rapid detection of MRSA infection with a technical simplicity and cost-effective method in a routine diagnostic laboratory.

Shewanella putrefaciens in cultured tilapia detected by a new calcein-loop-mediated isothermal amplification (Ca-LAMP) method.

Shewanella putrefaciens is being increasingly isolated from a wide variety of sources and is pathogenic to many marine and freshwater fish. For better control of this pathogen, there is a need for the development of simple and inexpensive but highly specific, sensitive, and rapid detection methods suitable for application in field laboratories. Our colorogenic loop-mediated isothermal amplification (LAMP) assay combined with calcein (Ca-LAMP) for unaided visual confirmation of LAMP amplicons is a simple method for fish pathogen detection in cultured tilapia. Here, we describe the detection of S. putrefaciens using the same platform. As before, the method gave positive results (orange to green color change) in 45 min at 63°C with sensitivity 100 times higher than that of a conventional PCR assay, with no cross-amplification of other known fish bacterial pathogens tested. Using the assay with 389 samples of gonads, fertilized eggs, and fry of farmed Nile and red tilapia Oreochromis spp., 35% of samples were positive for S. putrefaciens. The highest prevalence was found in samples of gonads (55%) and fertilized eggs (55%) from adult breeding stocks, indicating that S. putrefaciens could be passed on easily to fry used for stocking production ponds. Tissue tropism assays revealed that the spleen showed the highest colonization by S. putrefaciens in naturally infected tilapia and that it would be the most suitable organ for screening and monitoring fish stocks for presence of the bacteria.

SPR-DNA array for detection of methicillin-resistant Staphylococcus aureus (MRSA) in combination with loop-mediated isothermal amplification.

In this study, we evaluated surface plasmon resonance imaging (SPR imaging) as a DNA biosensor for the detection of methicillin-resistant Staphylococcus aureus (MRSA) which is one of the most common causes of nosocomial infections. The DNA sample were collected from clinical specimens, including sputum and blood hemoculture were undergone LAMP amplification for 0.18 kbp and 0.23 kbp DNA fragments of femB and mecA genes, respectively. The self-assembled monolayer surface (SAMs) was used for immobilized streptavidin-biotinylated probes on the sensor surface for the detection of LAMP amplicons from MRSA. Both LAMP amplicons were simultaneously hybridized with ssDNA probes immobilized onto a bio-functionalized surface to detect specific targets in the multiplex DNA array platform. In addition, the sensor surface could be regenerated allowing at least five cycles of use with a shortened assay time. The detection limit of LAMP-SPR sensing was 10 copies/µl and LAMP-SPR sensing system showed a good selectivity toward the MRSA.