A preoperative scoring system for predicting the extraprostatic extension of prostate cancer following radical prostatectomy using magnetic resonance imaging and clinical factors.

PURPOSE: We aimed to develop a preoperative prediction model for extraprostatic extension (EPE) in prostate cancer (PCa) patients following radical prostatectomy (RP) using MRI and clinical factors. METHODS: This retrospective study enrolled 266 consecutive patients who underwent RP for PCa in 2022. These patients were divided into a training set (n = 187) and a test set (n = 79) through random assignment. The evaluated variables included age, prostate-specific antigen (PSA) level, prostate volume, PSA density (PSAD), index tumor length on MRI, Prostate Imaging-Reporting and Data System (PI-RADS) category, and EPE-related MRI features as defined by PI-RADS v2.1. A predictive model was constructed through multivariable logistic regression and subsequently translated into a scoring system. The performance of this scoring system in terms of prediction and calibration was assessed using C statistics and the Hosmer‒Lemeshow test. RESULTS: Among patients in the training and test cohorts, 74 (39.6%) and 25 (31.6%), respectively, exhibited EPE after RP. The formulated scoring system incorporated the following factors: PSAD, index tumor length, bulging prostatic contour, and tumor-capsule interface > 10 mm as identified on MRI. This scoring system demonstrated strong prediction performance for EPE in both the training (C statistic, 0.87 [95% confidence interval, 0.86-0.87]) and test cohorts (C statistic, 0.85 [0.83-0.89]). Furthermore, the scoring system exhibited good calibration in both cohorts (P = 0.988 and 0.402, respectively). CONCLUSION: Our scoring system, built upon MRI features defined by the PI-RADS, offers valuable assistance in assessing the likelihood of EPE after RP.

Localization of solar panel cleaning robot combining vision processing and extended Kalman filter.

In this study, we introduce a method for estimating the position of a self-driving solar panel-cleaning mobile robot. This estimation relies on line counts, typically 16 cm in panel width, obtained through image processing on the panel floor, along with wheel encoder information and inertial sensor data. To achieve accurate line counts, we introduce two adjusted threshold values and allow offsets in these values based on the robot's speed. Additionally, inertial measurement unit (IMU) signals assist in determining whether a line is horizontal or vertical, depending on the robot's movement direction on the panel, utilizing the robot's heading angle and detected line angle. When the robot is positioned between lines on the panel, more precise location estimation is necessary beyond simple line counts. To tackle this challenge, we integrate the extended Kalman filter with IMU data and encoder information, significantly enhancing position estimation. This integration achieves an RMSE accuracy value of up to 0.089 m, notably at a relatively high speed of 100 mm/s. This margin of error is almost half that of the vision-based line-counting method.

ELONGATED HYPOCOTYL 5 interacts with HISTONE DEACETYLASE 9 to suppress glucosinolate biosynthesis in Arabidopsis.

Glucosinolates (GSLs) are defensive secondary metabolites produced by Brassicaceae species in response to abiotic and biotic stresses. The biosynthesis of GSL compounds and the expression of GSL-related genes are highly modulated by endogenous signals (i.e., circadian clocks) and environmental cues, such as temperature, light, and pathogens. However, the detailed mechanism by which light signaling influences GSL metabolism remains poorly understood. In this study, we found that a light-signaling factor, ELONGATED HYPOCOTYL 5 (HY5), was involved in the regulation of GSL content under light conditions in Arabidopsis (Arabidopsis thaliana). In hy5-215 mutants, the transcript levels of GSL pathway genes were substantially upregulated compared with those in wild-type plants. The content of GSL compounds was also substantially increased in hy5-215 mutants, whereas 35S::HY5-GFP/hy5-215 transgenic lines exhibited comparable levels of GSL-related transcripts and GSL content to those in WT plants. HY5 physically interacts with HISTONE DEACETYLASE9 (HDA9) and binds to the proximal promoter region of MYB29 and IMD1 to suppress aliphatic GSL biosynthetic processes. These results demonstrate that HY5 suppresses GSL accumulation during the daytime, thus properly modulating GSL content daily in Arabidopsis plants.

Melanophilin regulates dendritogenesis in melanocytes for feather pigmentation.

Limited studies using animal models with a few natural mutations in melanophilin (Mlph) provided partial functions of Mlph in melanosome trafficking. To investigate cellular functions of Mlph, especially ZnF motif of Mlph, we analyzed all three Mlph knockout (KO) quail lines, one and two base pair (bp) deletions as models for total KO, and three bp deletion causing deletion of one Cysteine (C84del) in the ZnF motif. All quail lines had diluted feather pigmentation with impaired dendritogenesis and melanosome transport in melanocytes. In vitro studies revealed capability of binding of the ZnF motif to PIP3, and impairment of PI3P binding and mislocalization of MLPH proteins with ZnF motif mutations. The shortened melanocyte dendrites by the C84del mutation were rescued by introducing WT Mlph in vitro. These results revealed the diluted feather pigmentation by Mlph mutations resulted from congregation of melanosomes in the cell bodies with impairment of the dendritogenesis and the transport of melanosomes to the cell periphery.

Bisphenol Analogs Downregulate the Self-Renewal Potential of Spermatogonial Stem Cells.

PURPOSE: In this study, we investigated the effect of bisphenol-A (BPA) and its major analogs, bisphenol-F (BPF), and bisphenol-S (BPS), on spermatogonial stem cells (SSCs) populations using in vitro SSC culture and in vivo transplantation models. MATERIALS AND METHODS: SSCs enriched from 6- to 8-day-old C57BL/6-eGFP+ male mice testes were treated with varying concentrations of bisphenols for 7 days to examine bisphenol-derived cytotoxicity and changes in SSC characteristics. We utilized flow cytometry, immunocytochemistry, real-time quantitative reverse transcription-PCR, and western blot analysis. The functional alteration of SSCs was further investigated by examining donor SSC-derived spermatogenesis evaluation through in vivo transplantation and subsequent testis analysis. RESULTS: BPF exhibited a similar inhibitory effect on SSCs as BPA, demonstrating a significant decrease in SSC survival, inhibition of proliferation, and induction of apoptosis. On the other hand, while BPS was comparatively weaker than BPA and BPF, it still showed significant SSC cytotoxicity. Importantly, SSCs exposed to BPA, BPF, and BPS exhibited a significant reduction in donor SSC-derived germ cell colonies per total number of cultured cells, indicating that, like BPA, BPF, and BPS can induce a comparable reduction in functional SSCs in the recipient animals. However, the progress of spermatogenesis, as evidenced by histochemistry and the expressions of PCNA and SSC specific markers, collectively indicates that BPA, BPF, and BPS may not adversely affect the spermatogenesis. CONCLUSIONS: Our findings indicate that the major BPA substitutes, BPF and BPS, have significant cytotoxic effects on SSCs, similar to BPA. These effects may lead to a reduction in the functional self-renewal stem cell population and potential impacts on male fertility.

Inter-reader Agreement for CT/MRI LI-RADS Category M Imaging Features: A Systematic Review and Meta-analysis.

Backgrounds/Aims: To systematically evaluate inter-reader agreement in the assessment of individual Liver Imaging Reporting and Data System (LI-RADS) category M (LR-M) imaging features in computed tomography/magnetic resonance imaging (CT/MRI) LI-RADS v2018, and to explore the causes of poor agreement in LR-M assignment. Methods: Original studies reporting inter-reader agreement for LR-M features on multiphasic CT or MRI were identified using the MEDLINE, EMBASE, and Cochrane databases. The pooled kappa coefficient (κ) was calculated using the DerSimonian-Laird random-effects model. Heterogeneity was assessed using Cochran's Q test and I2 statistics. Subgroup meta-regression analyses were conducted to explore the study heterogeneity. Results: In total, 24 eligible studies with 5,163 hepatic observations were included. The pooled κ values were 0.72 (95% confidence interval, 0.65-0.78) for rim arterial phase hyperenhancement, 0.52 (0.39-0.65) for peripheral washout, 0.60 (0.50-0.70) for delayed central enhancement, 0.68 (0.57-0.78) for targetoid restriction, 0.74 (0.65-0.83) for targetoid transitional phase/hepatobiliary phase appearance, 0.64 (0.49-0.78) for infiltrative appearance, 0.49 (0.30-0.68) for marked diffusion restriction, and 0.61 (0.48-0.73) for necrosis or severe ischemia. Substantial study heterogeneity was observed for all LR-M features (Cochran's Q test: p < 0.01; I2 ≥ 89.2%). Studies with a mean observation size of <3 cm, those performed using 1.5-T MRI, and those with multiple image readers, were significantly associated with poor agreement of LR-M features. Conclusions: The agreement for peripheral washout and marked diffusion restriction was limited. The LI-RADS should focus on improving the agreement of LR-M features.

Comparison of non-contrast abbreviated MRI and ultrasound as surveillance modalities for HCC.

BACKGROUND AND AIMS: Ultrasonography (US) is recommended for HCC surveillance in high-risk patients, but has limited performance in detecting early-stage HCC. We aimed to compare the diagnostic performance of biannual US and annual non-contrast abbreviated magnetic resonance imaging (NC-AMRI) as HCC surveillance modalities in high-risk patients. METHODS: This prospective, multicenter cohort study enrolled participants with an estimated annual risk of HCC greater than 5% between October 2015 and April 2017. Participants underwent six rounds of HCC surveillance at 6-month intervals, with both US and NC-AMRI at rounds 1, 3, and 5, and only US at rounds 2, 4, and 6. The sensitivity, diagnostic yield (DY), and false referral rate (FRR) for HCC detection by US and NC-AMRI were compared. RESULTS: In total, 208 participants underwent 980 US and 516 NC-AMRI examinations during 30 months of follow-up. Among them, 34 HCCs were diagnosed in 31 participants, with 20 (64.5%) classified as very early and 11 (35.5%) as early-stage. The sensitivity of annual NC-AMRI (71.0%, 22/31) was marginally higher than that of biannual US (45.2%, 14/31; p = 0.077). NC-AMRI showed a significantly higher DY than US (4.26% vs. 1.43%, p < 0.001), with a similar FRR (2.91% vs. 3.06%, p = 0.885). A simulation of alternating US and NC-AMRI at 6-month intervals yielded a sensitivity of 83.0% (26/31), significantly exceeding that of biannual US (p = 0.006). CONCLUSIONS: Annual NC-AMRI showed a marginally higher sensitivity than biannual US for HCC detection in high-risk patients. The DY of annual NC-AMRI was significantly higher than that of biannual US, without increasing the FRR. Alternating US and NC-AMRI at 6-month intervals could be an optimal surveillance strategy for high-risk patients. IMPACT AND IMPLICATIONS: Current guidelines permit the use of magnetic resonance imaging (MRI) as a surveillance tool for hepatocellular carcinoma (HCC) in patients in whom ultrasonography (US) is inadequate. However, the specific indications, imaging sequences, and surveillance intervals for MRI surveillance remain unclear. In our study, we found that annual non-contrast (NC)-abbreviated MRI (AMRI) exhibited marginally higher sensitivity and significantly better diagnostic yield than biannual US in high-risk patients for HCC. Adopting alternating US and NC-AMRI at 6-month intervals demonstrated significantly improved sensitivity compared to biannual US, making it a potentially optimal surveillance strategy for high-risk patients. CLINICAL TRIAL NUMBER: ClinicalTrials.gov Identifier: NCT02551250.

Post-polymerization of three-dimensional printing resin using a dental light curing unit.

Background/Purpose: In vat photopolymerization, post-polymerization of the three-dimensional (3D) printing resin is necessary to ensure the optimum physical properties of the printed objects. This study aimed to evaluate the potential use of a handheld polywave light-emitting diode (LED) dental light-curing unit (LCU) for post-polymerizing 3D printed resins by measuring the microhardness and biaxial flexural strength of the post-polymerized resin. Material and methods: 3D printed 1- and 2-mm-thick disks were irradiated with a dental LCU at 3200 mW/cm2. Post-polymerization was repeated either on one side from the top surface: two cycles (T2), four cycles (T4), and eight cycles (T8), or on both sides from the top and bottom surfaces: one cycle (T1B1), two cycles (T2B2), and four cycles (T4B4) for each side. The microhardness and biaxial strength of the disks were compared to those post-polymerized by a conventional desktop polymerizing unit (PC) and those without post-polymerization (NC). Results: Microhardness of the disks varied between the top and bottom surfaces of the 1-mm and 2-mm-thick disks, depending on the post-polymerization methods. T8 and T4B4 produced comparable microhardness on the top surface to PC for both thicknesses. In contrast, PC, T2B2, and T4B4 exhibited the highest microhardness on the bottom surface. Except for NC, the 1-mm-thick disks had a higher biaxial flexural strength than the 2-mm-thick disks. T4B4 resulted in the highest biaxial flexural strength for both thicknesses, which was comparable to that of the desktop polymerizing unit. Conclusion: The microhardness and biaxial flexural strengths of the post-polymerized 3D-printed disks increase with polymerization time. With sufficient polymerization from both sides, the polywave LCU has the potential to be a viable alternative to desktop polymerization units.

High energy density in artificial heterostructures through relaxation time modulation.

Electrostatic capacitors are foundational components of advanced electronics and high-power electrical systems owing to their ultrafast charging-discharging capability. Ferroelectric materials offer high maximum polarization, but high remnant polarization has hindered their effective deployment in energy storage applications. Previous methodologies have encountered problems because of the deteriorated crystallinity of the ferroelectric materials. We introduce an approach to control the relaxation time using two-dimensional (2D) materials while minimizing energy loss by using 2D/3D/2D heterostructures and preserving the crystallinity of ferroelectric 3D materials. Using this approach, we were able to achieve an energy density of 191.7 joules per cubic centimeter with an efficiency greater than 90%. This precise control over relaxation time holds promise for a wide array of applications and has the potential to accelerate the development of highly efficient energy storage systems.

Remote Epitaxy: Fundamentals, Challenges, and Opportunities.

Advanced heterogeneous integration technologies are pivotal for next-generation electronics. Single-crystalline materials are one of the key building blocks for heterogeneous integration, although it is challenging to produce and integrate these materials. Remote epitaxy is recently introduced as a solution for growing single-crystalline thin films that can be exfoliated from host wafers and then transferred onto foreign platforms. This technology has quickly gained attention, as it can be applied to a wide variety of materials and can realize new functionalities and novel application platforms. Nevertheless, remote epitaxy is a delicate process, and thus, successful execution of remote epitaxy is often challenging. Here, we elucidate the mechanisms of remote epitaxy, summarize recent breakthroughs, and discuss the challenges and solutions in the remote epitaxy of various material systems. We also provide a vision for the future of remote epitaxy for studying fundamental materials science, as well as for functional applications.

Correction to "Dual-Surfactant-Capped Ag Nanoparticles as a Highly Selective and Sensitive Colorimetric Sensor for Citrate Detection".

[This corrects the article DOI: 10.1021/acsomega.9b04199.].

Identification of vernalization-related genes and cold memory element (CME) required for vernalization response in radish (Raphanus sativus L.).

Floral transition is accelerated by exposure to long-term cold like winter in plants, which is called as vernalization. Acceleration of floral transition by vernalization is observed in a diversity of biennial and perennial plants including Brassicaceae family plants. Scientific efforts to understand molecular mechanism underlying vernalization-mediated floral transition have been intensively focused in model plant Arabidopsis thaliana. To get a better understanding on floral transition by vernalization in radish (Raphanus sativus L.), we investigated transcriptomic changes taking place during vernalization in radish. Thousands of genes were differentially regulated along time course of vernalization compared to non-vernalization (NV) sample. Twelve major clusters of DEGs were identified based on distinctive expression profiles during vernalization. Radish FLC homologs were shown to exert an inhibition of floral transition when transformed into Arabidopsis plants. In addition, DNA region containing RY motifs located within a Raphanus sativus FLC homolog, RsFLC1 was found to be required for repression of RsFLC1 by vernalization. Transgenic plants harboring disrupted RY motifs were impaired in the enrichment of H3K27me3 on RsFLC1 chromatin, thus resulting in the delayed flowering in Arabidopsis. Taken together, we report transcriptomic profiles of radish during vernalization and demonstrate the requirement of RY motif for vernalization-mediated repression of RsFLC homologs in radish (Raphanus sativus L.).

Routine Ureteral Stenting in Kidney Transplant Reduces Postoperative Hydronephrosis and Percutaneous Ureteral Interventions: A Single-Center Experience.

OBJECTIVES: The effect of routine ureteral stenting on postoperative hydronephrosis and percutaneous ureteral intervention in kidney transplant remains unknown. This study aimed to evaluate the effects of routine ureteral stenting on hydronephrosis and percutaneous ureteral intervention and the cost benefit of ureteral stenting in kidney transplant. MATERIALS AND METHODS: We retrospectively analyzed patients who underwent kidney transplant at a tertiary institution between 2005 and 2021. We adopted a ureteral stentingprotocol in2017, anda comparisonwas performed with previous patients without stents. RESULTS: In total, 539 patients underwent kidney transplant(271 with stents [51.3%], 268 without stents [49.7%]). Hydronephrosis was detected in 16 cases (5.9%) and 30 cases (11.2%) of groups with and without stents,respectively (P = .041). Among patients with hydronephrosis, the number of patients who underwent percutaneous ureteral intervention was significantly lower in the stent group than in the nostent group (1 [6.25%] vs 10 [33.33%]; P= .014).Twenty patients (3.71%) experienced major urologic complications (19 [7.1%] in the no-stent group, and 1 [0.4%] in the stent group; P = .001). No significant differences between the groups were shown in the incidence of urinary tract infections within 3 months of transplant (24 [8.9%] vs 22 [8.2%]; P = .846). No differences were shown between the groups in ureterovesical anastomosis time (24.4 vs 24.03 min; P = .699) or 1-year graft survival (97% vs 97.8%; P = .803). The healthcare cost was significantly lower in the stent group than in the no-stent group by $1702.05 ($15000.89 vs $16702.95; P < .001). CONCLUSIONS: Routine ureteral stenting in kidney transplant significantly decreased the incidence of postoperative hydronephrosis and percutaneous ureteral intervention. Stenting did notlead to increased urinary tract infections and was cost-effective.

Unilateral Pediculectomy and Reduction with Short-Segment Pedicle Screw Fixation for Thoracolumbar Burst Fracture: A Case Series.

BACKGROUND: This study aimed to evaluate the efficacy of unilateral pediculectomy and reduction with short-segment pedicle screw fixation for thoracolumbar burst fracture. METHODS: We retrospectively reviewed patients who underwent a unilateral pediculectomy and reduction with short-segment fixation and interbody fusion for thoracolumbar burst fracture. The unilateral pediculectomy created sufficient space to approach the ventral side of the spinal cord for removing bone fragments and insertion of an interbody cage to correct kyphosis. Lumbar lordosis (LL), pelvic incidence (PI) minus LL, and segmental Cobb angle were measured at 3 time points: preoperatively, postoperatively, and final follow-up. Furthermore, sagittal vertical axis (SVA) was measured to assess global sagittal balance at the final follow-up. RESULTS: A total of 10 patients, with a mean age of 39.8 ± 21.0, underwent the surgical procedure. All patients had a thoracolumbar injury classification and severity score > 5. The mean follow-up period was 15.8 ± 13.9 months. The mean postoperative LL (46.0 ± 5.8) was significantly higher (P = 0.008) than the preoperative measurement (32.8 ± 8.2). The mean postoperative PI minus LL (2.2 ± 8.4) was not significantly lower (P = 0.051) than preoperative measurement (15.4 ± 12.6). The mean postoperative segmental Cobb angle (11.4 ± 8.4) was significantly higher (P < 0.001) than the preoperative measurement (-11.6 ± 10.9). At the final follow-up, the mean sagittal vertical axiswas 10.0 ± 28.8 mm. CONCLUSIONS: Unilateral pediculectomy and reduction with short-segment fixation and interbody fusion served as an efficient surgical method for thoracolumbar burst fracture.

Research Note: Muscle hypertrophy is associated with reversed sexual dimorphism in body size of quail.

Sexual dimorphism is phenotypic differences between males and females in the same species. In general, males in most animals are larger than females at the same age, however, in quail, females have a larger body size with greater muscle mass than males. To understand what characteristics in muscle growth play roles in reversed sexual dimorphism in quail, the weights and the characteristics of the pectoralis major and gastrocnemius muscles (PM and GM, respectively) of male and female quail were compared in the current study. The data showed that 15-wk-old female quail have significantly heavier bodies, and PM and GM weights compared to male quail (1.27-folds, 1.29-folds, and 1.16-folds, respectively). To compare muscle characteristics such as hypertrophy (increased size) and hyperplasia (increased cell number), the PM and GM were stained using hematoxylin and eosin, and then histological characteristics such as total cross-sectional area (CSA), number and size of myofibers, and muscle bundle of the muscles were measured and analyzed. In both PM and GM, there were no differences in total numbers of myofibers and muscle bundles as well as the average numbers of myofibers per bundle between sexes. However, the sizes of myofiber and the bundle were significantly increased in female compared to male (1.33-folds and 1.28-folds in PM, and both 1.23-folds in GM, respectively). The findings of the current study suggest that muscle hypertrophy in female quail, not hyperplasia, can be attributed to the sexual dimorphism in quail size.

Validity of an automated screening Dixon technique for quantifying hepatic steatosis in living liver donors.

PURPOSE: This retrospective study aimed to evaluate the validity of an automated screening Dixon (e-DIXON) technique for quantifying hepatic steatosis in living liver-donor patients by comparison with magnetic resonance spectroscopy (MRS) as a reference standard. METHODS: A total of 285 living liver-donor candidates were examined with the e-DIXON technique and single-voxel MRS to assess hepatic steatosis and iron deposition between January 2014 and February 2019. The sensitivity, specificity, and positive and negative predictive values (PPV and NPV) of the e-DIXON technique for hepatic steatosis were calculated. The mean fat signal fractions obtained in MRS were compared between the donors diagnosed with hepatic steatosis and the normal group. The mean R2 values of donors with or without hepatic siderosis also were compared. RESULTS: The e-DIXON technique diagnosed normal in 133 (47%), fat in 124 (44%), iron in one (0.4%), and a combination of both fat and iron in 27 (10%) donors. The sensitivity, specificity, PPV, and NPV ​​for diagnosing hepatic steatosis were 94%, 70%, 64%, and 96%, respectively. There was a significant difference in the mean fat signal fraction obtained in MRS between the steatosis and normal groups (p < 0.001), but R2 values were not significantly different between siderosis and normal groups (p = 0.11). The e-DIXON technique showed a strong correlation with MRS in fat measurement (r2 = 0.92, p < 0.001). CONCLUSION: The e-DIXON technique reliably screens for hepatic steatosis but may not accurate for detecting hepatic iron deposition.

Emulation Evaluation of Interior Beam-Column Connections in PC and RC Moment-Resisting Frames.

Precast concrete (PC) structures have many advantages, but their use in the construction of middle- to high-rise buildings is limited. The construction of PC structures requires skills in various operations such as transportation, assembly, lifting, and structural soundness. In particular, regarding the seismic design of PC structures, it is necessary to clearly evaluate whether they have the same structural performance and usability as integral RC (cast-in-place) structures. In this paper, an experimental study was conducted to investigate whether PC members can achieve a seismic performance equivalent to that of RC members in beam-column joints, which are representative moment-resisting frames. The main variables are the two types of structural systems (intermediate and special moment-resisting frames) and the design flexural strength ratio of the columns and beams. The experimental and analytical results showed that the seismic performance of the PC specimens was equivalent to that of the RC specimens in terms of strength, stiffness, energy dissipation, and strain distribution, except for the specimen with splice sleeve bond failure of the column reinforcement (poor filling of the internal mortar). In addition, the I series satisfied the present emulation evaluation criteria for special moment-resisting frames of PC structures, confirming the possibility of applying intermediate moment-resisting frames.

Concurrent laparoscopic highly selective vagotomy with closure of duodenal ulcer perforations show good clinical results as primary repair alone.

OBJECTIVE: To compare clinical and operative results between laparoscopic primary repair (LPR) alone and LPR with highly selective vagotomy (LPR-HSV) in patients with duodenal ulcer perforation. METHODS: Clinical data from patients who underwent either LPR or LPR-HSV by resecting both sides of the neurovascular bundle using an ultrasonic or bipolar electrosurgical device for duodenal ulcer perforations, between 2010 and 2020, were retrospectively collected. Between-group differences in continuous and categorical variables were statistically analysed. RESULTS: Data from 184 patients (mean age, 49.6 years), who underwent either LPR (n = 132) or LPR-HSV (n = 52) were included. The mean operation time was significantly longer in the LPR-HSV group (116.5 ± 39.8 min) than in the LPR group (91.2 ± 33.3 min). Hospital stay was significantly shorter in the LPR-HSV group (8.6 ± 2.6 days) versus the LPR group (11.3 ± 7.1 days). The mean postoperative day of starting soft fluid diet was also significantly shorter in the LPR-HSV group (4.5 ± 1.4 days) than in the LPR group (5.6 ± 4 days). No between-group difference in morbidity rate was observed. The learning curve of the HSV procedure showed a stable procedure time after 10 operations. CONCLUSIONS: LPR with HSV may be a safe and feasible procedure for selective cases who are at high risk for ulcer recurrence.

Greater numbers and sizes of muscle bundles in the breast and leg muscles of broilers compared to layer chickens.

Meat-type (broiler) and egg-type (layer) chickens were bred by intensive selection over the years, resulting in more numbers and larger sizes of myofibers. Although the characteristics are important parameters in muscle growth and meat quality, muscle bundle characteristics have not been studied in poultry. Therefore, this study aimed to compare the histological characteristics of myofibers and muscle bundles in muscles between male broiler (Ross broiler breed) chickens and layer (Hy-Line) chickens. Chicken muscles, pectoralis major (PM) and gastrocnemius (GM), were sampled at the age of 49 days and stained to analyze histological characteristics. Expectedly, body weights (BWs) and weights of PM and GM muscles in 49-day-old broilers were significantly heavier than those in layers. Within PM, broilers exhibited greater number and cross-sectional area (CSA) of myofibers than layers (3.3- and 3.3-fold, respectively). The total number and CSA of PM muscle bundles were approximately 1.5 and 6.6 times greater, respectively, in broilers than layers. Moreover, broilers exhibited 2 times greater number of myofibers per bundle of PM muscle than layers. Within GM, myofiber number and CSA were 2.3- and 2.4-fold greater, respectively, in broilers than layers. In addition, the total number of muscle bundles and bundle CSA were 2.5- and 2.1-fold greater, respectively, in broilers than in the layers. The novel findings of the current study provide evidence that greater muscle mass of broilers occurs by both hyperplasia and hypertrophy of muscle bundles and myofibers.

Remote epitaxial interaction through graphene.

The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.