Enhancing Microalgae Content in Biocomposites through a Mechanical Grinding Method.

Microalgae-based biocomposites are gaining traction as ecofriendly and cost-effective alternatives to conventional petroleum-based plastics. However, achieving a homogeneous dispersion of microalgae within a biocomposite matrix remains a challenge. In this study, we investigated the effect of the size of dried microalgae (Chlorella sp.) on the quality of biocomposites. Ball milling, a mechanical grinding process, was used to control the size of the pretreated dried microalgae. Our results demonstrate that the microalgae size strongly depends on the total weight of the stainless-steel balls, rather than the number of balls used in the milling process. Poly(ethylene-vinyl acetate) (EVA), with functional groups resembling those of Chlorella sp., was incorporated into the ball-milled microalgae to produce homogeneous biocomposites. Smaller Chlorella sp. particles improved the ratio of microalgae and the mechanical properties of the biocomposites. Dried Chlorella sp. particles up to 161.43 µm, which were 72.84% smaller than the untreated microalgae, were obtained after 6 h of ball milling using 3/8-inch balls. This enabled the production of biocomposites with 60 wt.% microalgae and 61.02% of the tensile strength of pure EVA, comparable to traditional polymers. Our findings suggest that controlling the microalgae size through ball milling can improve the quality of microalgae-based biocomposites.

Improving Printability of Digital-Light-Processing 3D Bioprinting via Photoabsorber Pigment Adjustment.

Digital-light-processing (DLP) three-dimensional (3D) bioprinting, which has a rapid printing speed and high precision, requires optimized biomaterial ink to ensure photocrosslinking for successful printing. However, optimization studies on DLP bioprinting have yet to sufficiently explore the measurement of light exposure energy and biomaterial ink absorbance controls to improve the printability. In this study, we synchronized the light wavelength of the projection base printer with the absorption wavelength of the biomaterial ink. In this paper, we provide a stepwise explanation of the challenges associated with unsynchronized absorption wavelengths and provide appropriate examples. In addition to biomaterial ink wavelength synchronization, we introduce photorheological measurements, which can provide optimized light exposure conditions. The photorheological measurements provide precise numerical data on light exposure time and, therefore, are an effective alternative to the expendable and inaccurate conventional measurement methods for light exposure energy. Using both photorheological measurements and bioink wavelength synchronization, we identified essential printability optimization conditions for DLP bioprinting that can be applied to various fields of biological sciences.

Unsupervised Monocular Depth Estimation for Colonoscope System Using Feedback Network.

A colonoscopy is a medical examination used to check disease or abnormalities in the large intestine. If necessary, polyps or adenomas would be removed through the scope during a colonoscopy. Colorectal cancer can be prevented through this. However, the polyp detection rate differs depending on the condition and skill level of the endoscopist. Even some endoscopists have a 90% chance of missing an adenoma. Artificial intelligence and robot technologies for colonoscopy are being studied to compensate for these problems. In this study, we propose a self-supervised monocular depth estimation using spatiotemporal consistency in the colon environment. It is our contribution to propose a loss function for reconstruction errors between adjacent predicted depths and a depth feedback network that uses predicted depth information of the previous frame to predict the depth of the next frame. We performed quantitative and qualitative evaluation of our approach, and the proposed FBNet (depth FeedBack Network) outperformed state-of-the-art results for unsupervised depth estimation on the UCL datasets.

VOC Over 1.4 V for Amorphous Tin-Oxide-Based Dopant-Free CsPbI2Br Perovskite Solar Cells.

CsPbI2Br perovskite solar cells have attracted much attention because of the rapid development in their efficiency and their great potential as a top cell of tandem solar cells. However, the VOC outputs observed so far in most cases are far from that desired for a top cell. Up to now, with various kinds of treatments, the reported champion VOC is only 1.32 V, with a VOC deficit of 0.60 V. In this work, we found that aging of the SnCl2 precursor solution for the electron-transporting layer can promote the VOC of CsPbI2Br solar cells by employing a dopant-free-polymer hole transport material (HTM) over 1.40 V and efficiency over 15.5% with high reproducibility. With the champion VOC of 1.43 V, the VOC deficit was reduced to <0.50 V, which is achieved for the first time. This simple technique of SnCl2 solution aging forms a uniform and smooth amorphous SnOx film with pure Sn4+, elevates the conduction band of SnOx, and reduces the interfacial gaps and the trap state density of the device, resulting in enhancement in average VOC from ∼1.2 V in the nonaged case to ∼1.4 V in the aged case. Furthermore, the device using an aged SnCl2 solution also exhibits a much better long-term stability than that made of the fresh solution. These achievements in dopant/additive-free CsPbI2Br solar cells can be useful for future research on CsPbI2Br and tandem solar cells.

Proton Irradiation Tolerance of High-Efficiency Perovskite Absorbers for Space Applications.

Lead halide perovskite single layers with three grain sizes are subjected to proton-beam irradiation in order to assess the durability and radiation tolerance of perovskite solar cells (PSCs) against space radiation. Proton-beam irradiation is chosen because proton beams significantly affect solar cell performance in the space environment. We evaluate the effects of proton beams by focusing on the grain structure, crystal structure, and carrier lifetime of a perovskite single layer by using scanning electron microscopy, X-ray diffraction, photoluminescence (PL) spectra, and time-resolved PL (TRPL). The results show that proton irradiation does not significantly affect the grain structure and crystal structure of perovskite layer; the TRPL results show that the carrier lifetime inside the grain is constant up to a fluence of 1 × 1014 p+/cm2 and decreases significantly at a fluence of 1 × 1015 p+/cm2. Proton-beam radiation tolerance of the grain inside the perovskite layer is dominant in the radiation tolerance of PSCs.

Semi-transparent Perovskite Solar Cells Developed by Considering Human Luminosity Function.

Semi-transparent solar cells draw a great deal of attention because their applications include, for instance, photovoltaic windows. General approach to semi-transparent cells is using thin active layers or island-type structures. Here we take human luminosity function into account, and develop solar cells that harvest photons in the wavelength regions in which human eyes are less sensitive to light. We used an organic-inorganic hybrid perovskite, which is sensitive to light particularly in the blue and deep-blue regions, and plasmonic silver nanocubes that enhance light harvesting in the red and deep-red ranges. In order to tune the plasmonic wavelength to that range, we took advantage of electrode-coupled plasmons (ECPs). We prepared non-plasmonic semi-transparent solar cells, and reduced the active layer thickness and introduced ECPs, so that the visual transparency index and power conversion efficiency of the cell were improved by 28% and 6%, respectively, of the initial values.

Plasmonic Photovoltaic Cells with Dual-Functional Gold, Silver, and Copper Half-Shell Arrays.

Solid-state photovoltaic cells based on plasmon-induced charge separation (PICS) have attracted growing attention during the past decade. However, the power conversion efficiency (PCE) of the previously reported devices, which are generally loaded with dispersed metal nanoparticles as light absorbers, has not been sufficiently high. Here we report simpler plasmonic photovoltaic cells with interconnected Au, Ag, and Cu half-shell arrays deposited on SiO2@TiO2 colloidal crystals, which serve both as a plasmonic light absorber and as a current collector. The well-controlled and easily prepared plasmonic structure allows precise comparison of the PICS efficiency between different plasmonic metal species. The cell with the Ag half-shell array has higher photovoltaic performance than the cells with Au and Cu half-shell arrays because of the high population of photogenerated energetic electrons, which gives a high electron injection efficiency and suppressed charge recombination probability, achieving the highest PCE among the solid-state PICS devices even without a hole transport layer.

Synthesis and Characteristics of Fullerene Derivatives with Hexyl Perylene Moieties as N-Type Materials in Organic Solar Cells.

Recently, fullerene derivatives have received significant attention due to their potential impacts on the development of high performance organic photovoltaic (OPV) cells. One of the most successful fullerene derivatives thus far is [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM), which is being used as an electron acceptor material. However, PCBM has some disadvantages concerning its application in OPV cells, such as a weak absorption rate in the visible region and a relatively low LUMO level. In the present work, we synthesized a novel fullerene derivative, called hexyl perylene fullerene (HPF), which contains a hexyl perylene moiety. The HPF molecules showed two absorption peaks at 340 nm and 450 nm corresponding to the fullerene and to the perylene moiety, respectively. 1,8-octanedithiol was used as an additive to improve the compatibility between the poly(3-hexylthiophene) (P3HT) and the synthesized HPF The characteristics of an OPV cell composed of ITO/PEDOT:PSS/P3HT:HPF:1,8-octanedithiol/Al were investigated.

Studies on the Properties of Organic Photovoltaic Cells Using TiOx and DMDCNQI as Double Buffer Layers.

Various types of n-type buffer layers have been used in organic electronic devices. These buffer layers turned out to expedite carrier injection and reduce series resistance, leading to good performance of organic electronic devices. In our current work, we have fabricated organic photovoltaic (OPV) cells consisting of ITO/PEDOT:PSS/P3HT:PCBM/TiOx/DMDCNQI/AI which were fabricated in the presence of air. To incorporate the individual advantages of each n-type buffer layer, a DMDCNQI and TiOx layers were inserted to act as n-type double buffer layers. This leads to an increase of short-circuit current (JSC) and fill factor (FF) with good stability, in comparison to P3HT:PCBM based conventional cells. The results imply that the structures of double buffer layers can provide possible alternative to achieving high performance and air durability.