Methods for Improving the Germination of Rhodotypos scandens (Thunb.) Makino Seeds through Endocarp Removal.

Rhodotypos scandens (Thunb.) Makino is known to have a seed dispersal that is thick and stony (endocarp + seeds) and has potential as a landscaping tree seed. In several Rosaceae species, seeds are covered with a hard endocarp, making the internal seeds water-impermeable and germination difficult. Here, we analyzed the morphoanatomical traits and germination properties of R. scandens seeds. To identify ideal seed propagation conditions, we immersed R. scandens seeds in sulfuric acid for varying durations and subjected them to phytohormone (gibberellic acid A3 and fluridone) and a cold stratification (CS) (5 °C) treatment after endocarp removal (ER). The R. scandens stony seeds did not increase in mass by ≥25.0%. Following ER, the seed mass increased by ≥50.0% with water absorption when compared to the initial dry mass. Seed surfaces showed damage and cracks through scarification after 1 h of immersion in sulfuric acid, failing to germinate. A combination of ER, phytohormone treatment, and CS improved seed germination compared to ER alone (26.0 ± 5.3%). Overall, R. scandens seeds showed a dispersal with a hard endocarp from the parent plant, and a pre-treatment with ER, phytohormones, and CS was required for effective seed propagation.

Dormancy-release and germination improvement of Korean bellflower (Campanula takesimana Nakai), a rare and endemic plant native to the Korean peninsula.

Korean bellflower (Campanula takesimana Nakai) is a rare and perennial herb with medicinal and ornamental values, is endemic to the Ulleung Island of Korea. In this study, we investigated the dormancy-release and germination characteristics of C. takesimana (Campanulaceae) seeds by subjecting them to varying temperatures (5, 10, 15, 20, and 25°C and diurnal/nocturnal temperatures of 15/6, 20/10, and 25/15°C), cold stratification periods (0, 4, 8, or 12 weeks at 5°C), and gibberellic acid (GA3) concentrations (0, 10, 100, or 1,000 mg·L-1 at 15/6°C and 25/15°C) to identify the ideal seed propagation conditions. The seeds were stimulated to germinate (at 25°C, 12-h photoperiod with fluorescent lamps at 40 ± 10 µmol∙m-2∙s-1) after cold stratification. To examine the germination characteristics, the seeds were tested for water imbibition and found to readily absorb water. The seeds exhibited underdeveloped embryos during dispersal, showed final germination of 37.00% ± 4.43 at 25°C and were not influenced by temperature. The seeds subjected to 0, 4, 8, or 12 weeks of cold stratification germinated at a success rate of 22.00% ± 4.76, 87.00% ± 6.80, 79.00% ± 2.52, and 77.00% ± 1.91, respectively. Additionally, the germination characteristics, which were based on final germination, mean germination time, and germination velocity (Timson index), were significantly greater in the seeds pretreated with 1,000 mg·L-1 GA3 at 25/15°C than in seeds pretreated with 0 mg·L-1 GA3. Overall, the seeds broke dormancy with GA3 and short-term cold stratification. Therefore, we concluded that C. takesimana seeds have non-deep, simple, morphophysiological dormancy, and pretreatment with cold stratification and GA3 is required for effective seed propagation.

The complete chloroplast genomes of Allium sacculiferum, A. thunbergii, and A. taquetii (Amaryllidaceae) from Korea.

The genus Allium comprises some of the most commonly consumed food crops worldwide. The chloroplast genomes of A. sacculiferum, A. thunbergii, and A. taquetii are 152,444, 153,459, and 154,056 bp circular molecular genomes, respectively. The annotation results revealed the presence of 132 (89 protein-coding, 35 tRNA, and eight rRNA), 132 (86 protein-coding, 38 tRNA, and eight rRNA), and 132 (86 protein-coding, 38 tRNA, and eight rRNA) genes with 36.78%, 36.83%, and 36.88% total GC content in each genome, respectively. The chloroplast genome of each Allium species contains an 81,254, 82,473, and 83,068 bp LSC region, an 18,176, 18,006, and 17,958 bp SSC region, and a pair of 26,507, 26,490, and 26,515 bp IR regions, respectively. Phylogenetic analysis based on the 21 complete chloroplast genomes indicates that A. sacculiferum is closely related to A. koreanum; A. thunbergii and A taquetii are closely related to A. hookeri. This study shows that the three Allium species are Korean crop wild relatives that may be used to develop new Allium varieties in the future.

Non-Deep Simple Morphophysiological Dormancy and Germination Characteristics of Gentiana triflora var. japonica (Kusn.) H. Hara (Gentianaceae), a Rare Perennial Herb in Korea.

This study investigated the kind of seed dormancy and seed germination of Gentiana triflora var. japonica (Kusn.) H. Hara for developing a seed propagation method. The seeds were collected in October 2020 from plants at Mt. Sobaeksan, Korea. In a water imbibition experiment, seed weights increased by >101.9% of their initial masses over 12 h. Effects of incubation temperature (5, 15, 20, 25, 15/6, or 25/15 °C), cold stratification period (5 °C; 0, 4, 8, or 12 weeks), and gibberellic acid (GA3; 0, 10, 100, or 1000 mg∙L-1) and potassium nitrate treatment (KNO3; 0, 1000, 2000, or 4000 mg∙L-1) on seed germination were investigated to characterize seed dormancy. These seeds exhibited underdeveloped embryos during seed dispersal. The seeds failed to reach the final germination of 15.0% after treatment at 5, 15, 20, 25, 15/6, or 25/15 °C. After cold stratification for 8 weeks, the germination increased dramatically by >90.0% compared to that at 0 weeks. After the GA3 treatment, the germination reached >80.0% within 5 days. The final germination was 90.0% in the 100 mg∙L-1 GA3 treatment group. However, the KNO3 treatment had no effect on seed germination. Therefore, the G. triflora var. japonica seeds exhibited non-deep simple morphophysiological dormancy.

Growth and Bioactive Compound Content of Glehnia littoralis Fr. Schmidt ex Miquel Grown under Different CO2 Concentrations and Light Intensities.

This study aims to determine the effect of different CO2 concentrations and light intensities on the growth, photosynthetic rate, and bioactive compound content of Glehnia littoralis Fr. Schmidt ex Miquel in a closed-type plant production system (CPPS). The plants were transplanted into a deep floating technique system with recycling nutrient solution (EC 1.0 dS·m-1 and pH 6.5) and cultured for 96 days under a temperature of 20 ± 1 °C, a photoperiod of 12/12 h (light/dark), and RGB LEDs (red:green:blue = 7:1:2) in a CPPS. The experimental treatments were set to 500 or 1500 µmol∙mol-1 CO2 concentrations in combination with one of the three light intensities: 100, 200, or 300 µmol∙m-2∙s-1 photosynthetic photon flux density (PPFD). The petiole length of G. littoralis was the longest in the 500 µmol∙mol-1 CO2 concentration with the 100 µmol∙m-2∙s-1 PPFD. The fresh weight (FW) and dry weight (DW) of shoots and roots were the heaviest in the 300 µmol∙m-2∙s-1 PPFD regardless of the CO2 concentration. Higher CO2 concentrations and light intensities produced the greatest photosynthetic rates. However, the SPAD value was not significantly different between the treatments. Higher light intensities produced greater content per biomass of chlorogenic acid and total saponin, although the concentration per DW or FW was not significantly different between treatments. The first and second harvest yields were the greatest in the 300 µmol∙m-2∙s-1 PPFD, regardless of the CO2 concentration. These results show that the 300 µmol∙m-2∙s-1 PPFD enhanced the growth, photosynthetic rate, and bioactive compound accumulation of G. littoralis, regardless of the CO2 concentration in a CPPS.

Using Light Quality for Growth Control of Cucumber Seedlings in Closed-Type Plant Production System.

During seedling production, growth control of seedlings is an important problem because the overgrowth of seedlings causes a decrease of seedling quality and has disadvantages after transplanting. In this study, we aim to evaluate the possibility of replacing chemical plant growth regulators using light quality in a closed-type plant production system (CPPS) for cucumber seedling production. We used various light treatments, such as monochromatic or combined red (R) and blue (B), and combined R and B with UV-A or Far-red (Fr) light, to compare with a chemical plant growth regulator conventionally using in nursery farms. The combined R and B treatment decreased stem elongation and increased dry matter and compactness. UV-A treatment increased compactness but did not significantly affect the stem elongation or dry matter. Fr increased stem elongation and stem diameter and decreased compactness and dry matter. In leaf growth, combined R and B treatments and UV-A treatments increased leaf area, specific leaf weight, and SPAD value, and decreased leaf shape index. Fr treatments increased leaf area and leaf shape index and decreased specific leaf weight (SLW) and SPAD values. Cucumber seedlings have many different morphological changes, and R5B5 light quality was more effective in growth control due to higher compactness than chemical plant growth regulators. Also, R5B5 light quality has increased seedling quality, such as dry matter and SLW compared with fluorescent lamps. Thus, the use of light quality is a possible alternative to a chemical plant growth regulator.

Growth Characteristics of Adenophora triphylla var. japonica Hara Seedlings as Affected by Growing Medium.

Adenophora triphylla var. japonica Hara is a highly valued medicinal plant that is used to treat or prevent bronchitis, cough, cancer, and obesity. However, there has been no study on the production of Adenophora triphylla var. japonica Hara seedlings in a closed-type plant production system (CPPS). This study was conducted to examine the growth characteristics of Adenophora triphylla var. japonica Hara seedlings as affected by different growing media. The seeds were sown on a 128-cell plug tray filled with urethane sponges (US), LC grow foam (LC), rockwool (RW), or terra-plugs (TP). The seedlings were cultured for a duration of 54 days under temperature 25 ± 1°C, a photoperiod of 12/12 h (light/dark), and light intensity of 180 µmol·m-2·s-1 photosynthetic photon flux density provided by RB LEDs (red:blue = 8:2) in a closed-type plant production system (CPPS). The germination rate of Adenophora triphylla var. japonica Hara was significantly highest in the TP. Also, seedling shoot growth indicators of plant height, leaf length, leaf width, number of leaves, fresh weight (FW), and dry weight (DW) of the shoot, and leaf area were markedly the greatest in the TP and the lowest in the US. The SPAD (soil-plant analysis development) value was higher in the TP and US than in the LC or RW. In addition, the seedling root growth characteristics of total root length, root surface area, root volume, and number of root tips were significantly greatest in the TP. Moreover, the maximum root diameter, FW and DW of roots were the greatest in the TP. In conclusion, the results suggest that TP are viable for the growth development of Adenophora triphylla var. japonica Hara seedlings.

Evaluation of implant stability using different implant drilling sequences.

BACKGROUND/PURPOSE: Simplifying the drilling sequence would be meaningful for implant surgery, if it does not exert a negative influence. This prospective clinical study was conducted to evaluate the stability of implant placements after simplifying the drilling sequence. MATERIALS AND METHODS: Subjects were divided into a control group that underwent a normal drilling sequence or a test group that underwent only an initial and final drilling. To evaluate the stability of the placed implant, radiography and implant stability quotient (ISQ) measurements were recorded immediately and 5 months after placement. RESULTS: In all subjects, the prosthesis process was completed with no significant resorption of the marginal bones. In contrast, a statistically significant difference was observed between the control and test groups 5 months after the implants were placed in terms of the ISQ score (80.72 ±â€¯6.76 and 71.83 ±â€¯9.00, respectively); however, both scores were sufficient to proceed with the prosthesis process. CONCLUSION: These attempts to simplify drilling protocols are expected to contribute the improvement of implant-related treatments in future.

The effect of an interfragmentary gap on the clinical outcome after mandibular angle fracture surgery.

BACKGROUND/AIM: The mandibular angle fracture occasionally widens at the lower border after surgery using a single miniplate. However, the effects of an interfragmentary gap have not been fully investigated. The aim of this study was to determine the effects of gaps caused by mandibular angle fracture surgery using a single superior border miniplate technique. MATERIAL AND METHODS: In this prospective study, the interfragmentary gap was measured by panoramic radiography and cone-beam computed tomography (CBCT) postoperatively. The width of the gap measured by panoramic radiography and CBCT scans was compared. The patients were divided into two groups based on the gap width (more or less than 1.5 mm). In CBCT scans, bucco-lingual displacement of the proximal segment was evaluated. Clinical results and complication rates were investigated according to the gap and displacement. The findings were statistically analyzed. RESULTS: Thirty-two patients were included in the study. The mean interfragmentary gap widths were 1.56 ± 0.83 mm by panoramic radiography and 2.12 ± 0.87 mm by CBCT scans. CBCT measured a gap width of approximately 0.5 mm wider than panoramic radiography (P = 0.001). Twenty-two patients (68.8%) had an interfragmentary gap width of >1.5 mm, and ten patients (31.2%) had a gap width of <1.5 mm. All patients had favorable occlusion at the last clinical examination. There were no statistically significant differences in intermaxillary fixation periods and complication rates (P > 0.05). One patient in the wider gap group experienced pain in the temporomandibular joint when opening the mouth. Six patients (18.8%) had lingual displacement of the proximal fragment. Displacement did not significantly influence the complication rate (P > 0.05). CONCLUSION: The presence of an interfragmentary gap after mandibular angle fracture surgery did not affect the clinical outcome.

Septic arthritis of the temporomandibular joint: a case report.

Septic arthritis of the temporomandibular joint (TMJ) is a rare disease. The most common symptoms of this disease are acute malocclusion, limited mouth opening, swelling, and tenderness of affected TMJ. These symptoms are often confused with internal derangement of the articular disc, rheumatoid arthritis, retrodiscitis, or osteoarthritis. Therefore, differential diagnosis by image examination is required. Usually, antimicrobial treatment and surgical drainage by needle aspiration, arthroscopy, or arthrotomy are effective treatment approaches. In this study, a patient who was diagnosed with septic arthritis was treated with arthrocentesis and antibiotics without significant complications. We present a case report with a review of the literature.

Bilateral Temporomandibular Joint Replacement Using Computer-Assisted Surgical Simulation and Three-Dimensional Printing.

The dental occlusion is the important reference for replacement of the temporomandibular joint. If a patient does not have normal occlusion, few considerations are needed for temporomandibular joint replacement. The custom-made prosthesis, typically fabricated with a stereolithographic model, is probably the optimized solution currently available. However the ready-made stock from Biomet Microfixation System (Jacksonville, FL) is the only available product, which is authorized by the government ministry in South Korea, for replacement of the temporomandibular joint. This report presents a patient with the problems that were retrognathic "bird face" profile subsequent to severe bilateral condylar resorption and temporomandibular joint ankylosis without enough natural teeth for occlusion. Bilateral temporomandibular joint replacement using the ready-made prosthesis was done by reestablishing the mandibular position with new occlusion and improved facial profile via the virtual surgical planning and stereolithographic model simulation.

Simultaneous surgery for subcondylar fracture and prominent angle of the mandible.

We experienced a patient of subcondylar fracture who had a squared contour of the lower face with prominent angle of the mandible and masseter hypertrophy. Our patient was increasingly seeking esthetic improvement of the lower third of the face. But she did not want multi-stage operations. Thus, we decided and performed a one-stage mandibular angle ostectomy with fracture management. We have a stable and esthetic result simultaneously despite fractures of the fixation plates during follow-up period, so report a case.

Cavernous sinus thrombosis progression from trismus.

In the Department of Oral and Maxillofacial Surgery, patients with trismus can be easily identified. If the cause of trismus is infection of the masticatory space near the pterygoid plexus, the possibility of cavernous sinus thrombosis should be considered. We report the case of a patient who presented with limited mouth opening and progressed to cavernous sinus thrombosis, along with a review of the relevant literature.

A simple method of intraoperative intubation tube change.

Nasotracheal intubation should be performed in patients with jaw fractures because maxillomandibular fixation is required. However, when there are concomitant fractures of the nose and facial bones, an intubation tube positioned at the nose makes it difficult to perform an intricate surgery. In order to overcome these problems, a variety of ways to change the position of the tube have been introduced. We describe a simple technique of switching the tube from a nasal to oral position, which was easily executed in a patient with concomitant nasal and mandibular fractures, accompanied by a literature review.

Comparison of resorbable plates and titanium plates for fixation stability of combined mandibular symphysis and angle fractures.

OBJECTIVES: We compared resorbable plates with titanium plates for treatment of combined mandibular angle and symphyseal fractures. MATERIALS AND METHODS: Patients with mandibular angle and symphysis fractures were divided into two groups. The control (T) group received titanium plates while the experimental (R) group received resorbable plates. All procedures were carried out under general anesthesia using standard surgical techniques. We compared the frequency of wound dehiscence, development of infection, malocclusion, malunion, screw breakage, and any other technical difficulties between the two groups. RESULTS: Thirteen patients were included in the R group, where 39 resorbable plates were applied. The T group consisted of 16 patients who received 48 titanium plates. The mean age in the R and T groups was 28.29 and 24.23 years, respectively. Primary healing of the fractured mandible was obtained in all patients in both groups. Postoperative complications were minor and transient. Moreover, there were no significant differences in the rates of various complications between the two groups. Breakage of 3 screws during the perioperative period was seen in the R group, while no screws or plates were broken in the T group. CONCLUSION: Resorbable plates can be used to stabilize combined mandibular angle and symphysis fractures.

Outcomes of open versus closed treatment in the management of mandibular subcondylar fractures.

OBJECTIVES: To compare the clinical and radiological outcomes after closed reduction (CR) and open reduction and internal fixation (ORIF) in the management of subcondylar fractures. MATERIALS AND METHODS: Forty-eight patients presenting with subcondylar fracture between January 2010 and March 2013 were evaluated retrospectively. Fifteen patients were treated with CR and 33 patients with ORIF. The clinical and radiologic parameters were evaluated during follow-up (mean, 7.06 months; range, 3 to 36 months). RESULTS: In the CR group, no patients had any problems with regard to the clinical parameters. The average period of maxillomandibular fixation (MMF) was 5.47 days. The preoperative average tangential angulation of the fractured fragment was 3.67°, and loss of ramus height was 2.44 mm. In the ORIF group, no clinical problems were observed, and the average period of MMF was 6.33 days. The preoperative average tangential angulation of the subcondylar fragment was 8.66°, and loss of ramus height was 3.61 mm. CONCLUSION: CR provided satisfactory clinical results, though ORIF provided more accurate reduction of the fractured fragment. So there is no distinct displacement of fractured fragment, CR should be selected than ORIF because of no need for surgery.

Closed suction drainage for deep neck infections.

PURPOSE: There have been various incision and drainage methods for deep neck infection (DNI). Closed-suction drainage (CSD) has been used to decrease hematoma or to drain pus in other forms of medical surgery. The purpose of this investigation was to evaluate the usefulness of CSD for DNI. PATIENTS AND METHODS: This study consisted of 30 patients who underwent CSD after incision and drainage for DNI between January 2006 and December 2011. The patients' demographics, systemic diseases, methods of airway control, involved spaces, incision, CSD results, duration of hospitalization, and complications were investigated. RESULTS: CSD was used to treat 30 DNI patients. Eleven patients (37%) had underlying systemic diseases like diabetes mellitus, hypertension, hepatitis, asthma, etc. Twenty four patients (80%) had odontogenic infections in the mandibular molar region. Tracheostomy was performed in 5 patients (17%). The involved spaces were various from parapharyngeal space to mediastinum (mean: 4.8 spaces), and CSD was applied with drainage lines (mean: 3; 2-7 drains) over the course of 4-37 days (mean 14.6 days). The total amount of drained pus was 8-1344 cc (mean: 406 cc) and the daily amount was 1-61 cc (mean: 28 cc) from each patient. The mean length of hospital stay was 26 days, with a range of 9-83 days. Wound rupture happened in 7% of 56 total incision sites and spontaneous removal of the drain tube occurred in 3% of 91 total tubes. Four patients died because of cardiac arrest, pulmonary edema, and hypoxia. A statistical significance was accepted about total and daily amount of drainage at Pearson's correlation test (p < 0.001). CONCLUSION: Accurate diagnosis, safe airway management, and early surgical drainage were important in DNI treatment. Compared to other drainage systems, CSD is clinically useful for treating DNI due to minimal incision, convenience of post-operative management, and less postoperative complications.

Bisphosphonates-related osteonecrosis of the jaw in Korea: a preliminary report.

OBJECTIVES: Bisphosphonates (BP) are widely used in medicine for inhibiting bone resorption; however bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a major side effect of BP. To date, there have been no specific reports on the incidence of BRONJ among Koreans. This study investigated the preliminary results from a nationwide survey of BRONJ in the Departments of Oral and Maxillofacial Surgery (OMFS) at individual training hospitals. MATERIALS AND METHODS: A total of 15 OMFS departments (10 from dental schools, 4 from medical schools, and 1 from a dental hospital) participated in a multi-centric survey. This study assessed every BRONJ case diagnosed between January 2010 and December 2010. The patient age and BP type were evaluated. RESULTS: A total of 254 BRONJ cases were collected. The majority of BRONJ cases were associated with oral BP therapy, while 21.8% of the cases were associated with intravenous administration. Alendronate was the drug most frequently related to BRONJ (59.2% of cases), followed by risedronate (14.3%) and zolendronate (17.0%). The average age of BRONJ patients was 70.0±10.1 years, with a range of 38-88 years of age. With the number of BP patients in Korea reported to be around 600,000 in 2008, the estimated incidence of BRONJ is at least 0.04% or 1 per 2,300 BP patients. CONCLUSION: The results suggest that the estimated incidence of BRONJ in Korea is higher than the incidence of other countries. Future prospective studies should be carried out to investigate the exact epidemiological characteristics of BRONJ in Korea.

Displacement of dental implants into the focal osteoporotic bone marrow defect: a report of three cases.

Focal osteoporotic bone marrow defect (FOBMD) is a radiolucent area corresponding to the presence of hematopoietic tissue rarely found in the jaws. FOBMD is most commonly located in the mandibular edentulous posterior area of a middle-aged female. From November 2011 to November 2012, we experienced three cases involving removal of implants that had accidentally fallen into the FOBMD area. All patients happened to be female, with a mean age of 54 years (range: 51-60 years). One case involved hypoesthesia of the lower lip and chin, while two cases healed without any complication. Displacement of an implant into the FOBMD area is an unusual event, which occurs rarely during placement of a dental fixture. The purpose of this study was to report on three cases of FOBMD and to provide a review of related literature.