Relationship between acoustic traits of protesting cries of domestic kittens (Felis catus) and their individual chances for survival.

Domestic cat (Felis catus) mothers may rely on offspring cries to allocate resources in use of individuals with greater chances for survival and sacrifice the weak ones in case of impossibility to raise the entire large litter. Potential victims of this maternal strategy can enhance their chances of survival, by producing vocalizations with traits mimicking those of higher-quality offspring. We compared acoustic traits of 4990 cries produced during blood sampling by 57 two-week-old captive feral kittens (28 males, 29 females); 47 of them survived to 90 days of age and 10 died by reasons not related to traumas or aggression. No relationship was found between acoustic parameters and kitten survival, however, positive relationship was found between survival and body weight. The cries had moderate cues to individuality and lacked cues to sex. Body weight correlated positively with fundamental frequency and negatively with call rate, duration, peak frequency and power quartiles. We discuss that dishonesty of acoustic traits of kitten quality could develop as adaptation for misleading a mother from allocation resources between the weaker and stronger individuals, thus enhancing individual chances for survival for the weaker littermates. Physical constraint, as body weight, may prevent extensive developing the deceptive vocal traits.

Inbreeding Coefficient and Distance in MHC Genes of Parents as Predictors of Reproductive Success in Domestic Cat.

Inbreeding and low diversity in MHC genes are considered to have a negative effect on reproductive success in animals. This study presents an analysis of the number and body mass of offspring in domestic cat, depending on the inbreeding coefficient and the degree of similarity in MHC genes of class I and II in parents. Inbred partners had a lower number of live kittens at birth than outbred ones. At the same time, the inbreeding coefficient did not affect the litter size and the number of offspring who survived until the period of transition to solid food. The most significant predictor for the number of surviving offspring was the degree of parental similarity in MHC genes: the parents with the maximum distance in MHC genes had more survived kittens. Moreover, this effect was most pronounced immediately after birth. A significant percentage of kittens from parents with a minimum distance in MHC genes were either stillborn or died on the first day after birth. By the age of transition to solid food, this effect is no longer so pronounced. Furthermore, neither the inbreeding coefficient nor the distance in MHC genes of parents had any effect on the body mass of kittens.

Synthesis and Characterization of N-Isopropylacrylamide Microspheres as pH Sensors.

Swellable polymer microspheres that respond to pH were prepared by free radical dispersion polymerization using N-isopropylacrylamide (NIPA), N,N'-methylenebisacrylamide (MBA), 2,2-dimethoxy-2-phenylacetylphenone, N-tert-butylacrylamide (NTBA), and a pH-sensitive functional comonomer (acrylic acid, methacrylic acid, ethacrylic acid, or propacrylic acid). The diameter of the microspheres was between 0.5 and 1.0 µm. These microspheres were cast into hydrogel membranes prepared by mixing the pH-sensitive swellable polymer particles with aqueous polyvinyl alcohol (PVA) solutions followed by crosslinking with glutaric dialdehyde for use as pH sensors. Large changes in the turbidity of the PVA membrane were observed as the pH of the buffer solution in contact with the membrane was varied. These changes were monitored by UV-visible absorbance spectroscopy. Polymer swelling of many NIPA copolymers was reversible and independent of the ionic strength of the buffer solution in contact with the membrane. Both the degree of swelling and the apparent pKa of the polymer microspheres increased with temperature. Furthermore, the apparent pKa of the polymer particles could be tuned to respond sharply to pH in a broad range (pH 4.0-7.0) by varying the amount of crosslinker (MBA) and transition temperature modifier (NTBA), and the amount, pKa, and hydrophobicity of the pH-sensitive functional comonomer (alkyl acrylic acid) used in the formulation. Potential applications of these polymer particles include fiber optic pH sensing where the pH-sensitive material can be immobilized on the distol end of an optical fiber.

Swellable Copolymers of N-isopropylacrylamide and Alkyl Acrylic Acids for Optical pH Sensing.

Swellable polymers that respond to pH (including a portion of the physiological pH range) have been prepared from N-isopropylacrylamide (NIPA) copolymerized with acrylic acid, methacrylic acid, ethacrylic acid or propacrylic acid by dispersion polymerization. When the swellable polymer particles are dispersed in a polyvinyl alcohol (PVA) hydrogel membrane, large changes occur in the turbidity of the membrane (which is measured using an absorbance spectrometer) as the pH of the buffer solution in contact with the hydrogel membrane is varied. The swelling of the NIPA copolymer is nonionic, as the ionic strength of the buffer solution in contact with the PVA membrane was increased from 0.1 to 1.0 M without a decrease in the swelling. For many of these NIPA copolymers, swelling was also reversible in both low- and high ionic strength pH-buffered media and at ambient and physiological temperatures. The composition of the formulation used to prepare these copolymers of NIPA can be correlated to the enthalpy and entropy of the pH-induced swelling.

Deciphering and Controlling Structural and Functional Parameters of the Shells in Vesicle-Templated Polymer Nanocapsules.

Vesicle-templated nanocapsules are prepared by polymerization of hydrophobic acrylic monomers and cross-linkers in the hydrophobic interior of self-assembled bilayers. Understanding the mechanism of capsule formation and the influence of synthetic parameters on the structural features and functional performance of nanocapsules is critical for the rational design of functional nanodevices, an emerging trend of application of the nanocapsule platform. This study investigated the relationship between basic parameters of the formulation and synthesis of nanocapsules and structural and functional characteristics of the resulting structures. Variations in the monomer/surfactant ratio, temperature of polymerization, and the molar fraction of the free-radical initiators were investigated with a multipronged approach, including shell thickness measurements using small-angle neutron scattering, evaluation of the structural integrity of nanocapsules with scanning electron microscopy, and determination of the retention of entrapped molecules using absorbance and fluorescence spectroscopy. Surprisingly, the thickness of the shells did not correlate with the monomer/surfactant ratio, supporting the hypothesis of substantial stabilization of the surfactant bilayer with loaded monomers. Decreasing the temperature of polymerization had no effect on the spherical structure of nanocapsules but resulted in progressively lower retention of entrapped molecules, suggesting that a spherical skeleton of nanocapsule forms rapidly, followed by filling the gaps to create the structure without pinholes. Lower content of initiators resulted in slower reactions, outlining the baseline conditions for practical synthetic protocols. Taken together, these findings provide insights into the formation of nanocapsules and offer methods for controlling the properties of nanocapsules in viable synthetic methods.

Building Functional Nanodevices with Vesicle-Templated Porous Polymer Nanocapsules.

Vesicle-templated nanocapsules offer a unique combination of properties enabled by robust shells with single-nanometer thickness containing programmed uniform pores capable of fast and selective mass transfer. These capsules emerged as a versatile platform for creating functional devices, such as nanoreactors, nanosensors, and containers for the delivery of drugs and imaging agents. Nanocapsules are synthesized by a directed assembly method using self-assembled bilayers of vesicles as temporary scaffolds. In this approach, hydrophobic building blocks are loaded into the hydrophobic interior of vesicles formed from lipids or surfactants. Pore-forming templates are codissolved with the monomers and cross-linkers in the interior of the bilayer. The polymerization forms a cross-linked shell with embedded pore-forming templates. Removal of the surfactant scaffold and pore-forming templates leads to free-standing nanocapsules with shells containing uniform imprinted nanopores. Development of reliable and scalable synthetic methods for the modular construction of capsules with tunable properties has opened the opportunity to pursue practical applications of nanocapsules. In this Account, we discuss how unique properties of vesicle-templated nanocapsules translate into the creation of functional nanodevices. Specifically, we focus the conversation on applications aiming at the delivery of drugs and imaging agents, creation of fast-acting and selective nanoreactors, and fabrication of nanoprobes for sensing and imaging. We present a brief overview of the synthesis of nanocapsules with an emphasis on recent developments leading to robust synthetic methods including the synthesis under physiological conditions and creation of biodegradable nanocapsules. We then highlight unique properties of nanocapsules essential for practical applications, such as precise control of pore size and chemical environment, selective permeability, and ultrafast transport through the pores. We discuss new motifs for catch and release of small molecules with porous nanocapsules based on controlling the microenvironment inside the nanocapsules, regulating the charge on the orifice of nanopores in the shells, and reversible synergistic action of host and guest forming a supramolecular complex in nanocapsules. We demonstrate successful creation of fast-acting and selective nanoreactors by encapsulation of diverse homogeneous and nanoparticle catalysts. Due to unhindered flow of substrates and products through the nanopores, encapsulation did not compromise catalytic efficiency and, in fact, improved the stability of entrapped catalysts. We present robust nanoprobes based on nanocapsules with entrapped sensing agents and show how the encapsulation resulted in selective measurements with fast response times in challenging conditions, such as small volumes and complex mixtures. Throughout this Account, we highlight the advantages of encapsulation and discuss the opportunities for future design of nanodevices.

Unraveling the Single-Nanometer Thickness of Shells of Vesicle-Templated Polymer Nanocapsules.

Vesicle-templated nanocapsules have emerged as a viable platform for diverse applications. Shell thickness is a critical structural parameter of nanocapsules, where the shell plays a crucial role providing mechanical stability and control of permeability. Here we used small-angle neutron scattering (SANS) to determine the thickness of freestanding and surfactant-stabilized nanocapsules. Despite being at the edge of detectability, we were able to show the polymer shell thickness to be typically 1.0 ± 0.1 nm, which places vesicle-templated nanocapsules among the thinnest materials ever created. The extreme thinness of the shells has implications for several areas: mass-transport through nanopores is relatively unimpeded; pore-forming molecules are not limited to those spanning the entire bilayer; the internal volume of the capsules is maximized; and insight has been gained on how polymerization occurs in the confined geometry of a bilayer scaffold, being predominantly located at the phase-separated layer of monomers and cross-linkers between the surfactant leaflets.

Controlling the Encapsulation of Charged Molecules in Vesicle-Templated Nanocontainers through Electrostatic Interactions with the Bilayer Scaffold.

This work addresses the challenge of creating hollow nanocapsules with a controlled quantity of encapsulated molecules. Such nanocontainers or nanorattle-like structures represent an attractive platform for building functional devices, including nanoreactors and nanosensors. By taking advantage of the electrostatic attraction between oppositely charged cargo molecules and the surface of the templating bilayer of catanionic vesicles, formed by mixing single-tailed cationic and anionic surfactants, we were able to achieve a substantial increase in the local concentration of molecules inside the vesicle-templated nanocapsules. Control of electrostatic interactions through changes in the formulation of catanionic vesicles or the pH of the solution enabled fine tuning of the encapsulation efficiency in capturing ionic solutes. The ability to control the quantity of entrapped molecules greatly expands the application of nanocontainers in the creation of functional nanodevices.

Encapsulation of Homogeneous Catalysts in Porous Polymer Nanocapsules Produces Fast-Acting Selective Nanoreactors.

Nanoreactors were created by entrapping homogeneous catalysts in hollow nanocapsules with 200 nm diameter and semipermeable nanometer-thin shells. The capsules were produced by the polymerization of hydrophobic monomers in the hydrophobic interior of the bilayers of self-assembled surfactant vesicles. Controlled nanopores in the shells of nanocapsules ensured long-term retention of the catalysts coupled with the rapid flow of substrates and products in and out of nanocapsules. The study evaluated the effect of encapsulation on the catalytic activity and stability of five different catalysts. Comparison of kinetics of five diverse reactions performed in five different solvents revealed the same reaction rates for free and encapsulated catalysts. Identical reaction kinetics confirmed that placement of catalysts in the homogeneous interior of polymer nanocapsules did not compromise catalytic efficiency. Encapsulated organometallic catalysts showed no loss of metal ions from nanocapsules suggesting stabilization of the complexes was provided by nanocapsules. Controlled permeability of the shells of nanocapsules enabled size-selective catalytic reactions.

Tuning Optical Properties of Encapsulated Clusters of Gold Nanoparticles through Stimuli-Triggered Controlled Aggregation.

Gold nanoparticles entrapped in the hollow polymer nanocapsules undergo pH-mediated controlled aggregation. Encapsulated clusters of nanoparticles show absorbance at higher wavelengths compared with individual nanoparticles. The size of the aggregates is controlled by the number of nanoparticles entrapped in individual nanocapsules. Such controlled aggregation may permit small biocompatible nanoparticles exhibit desirable properties for biomedical applications that are typically characteristic of large nanoparticles.

Directed assembly of vesicle-templated polymer nanocapsules under near-physiological conditions.

This work addresses the challenge of creating hollow polymer capsules with wall thickness in the single-nanometer range under mild conditions. We present a simple and scalable method for the synthesis of hollow polymer nanocapsules in the bilayers of spontaneously assembled surfactant vesicles. Polymerization is initiated thermally with the help of a peroxide initiator and an amine activator codissolved with monomers and cross-linkers in the hydrophobic interior of the surfactant bilayer. To avoid premature polymerization, the initiator and the activator were added separately to the mixtures of cetyltrimethylammonium tosylate (CTAT) and sodium dodecylbenzenesulfonate (SDBS) containing monomers and cross-linkers. Upon hydration and mixing of the aqueous solutions, equilibrium monomer-loaded vesicles formed spontaneously after a brief incubation. The removal of oxygen and further incubation at slightly elevated temperatures (35-40 °C) for 1 to 2 h has led to the formation of hollow polymer nanocapsules. Structural and permeability characterization supported the high yield of nanocapsules with no pinhole defects.

Facile directed assembly of hollow polymer nanocapsules within spontaneously formed catanionic surfactant vesicles.

Surfactant vesicles containing monomers in the interior of the bilayer were used to template hollow polymer nanocapsules. This study investigated the formation of surfactant/monomer assemblies by two loading methods, concurrent loading and diffusion loading. The assembly process and the resulting aggregates were investigated with dynamic light scattering, small angle neutron scattering, and small-angle X-ray scattering. Acrylic monomers formed vesicles with a mixture of cationic and anionic surfactants in a broad range of surfactant ratios. Regions with predominant formation of vesicles were broader for compositions containing acrylic monomers compared with blank surfactants. This observation supports the stabilization of the vesicular structure by acrylic monomers. Diffusion loading produced monomer-loaded vesicles unless vesicles were composed from surfactants at the ratios close to the boundary of a vesicular phase region on a phase diagram. Both concurrent-loaded and diffusion-loaded surfactant/monomer vesicles produced hollow polymer nanocapsules upon the polymerization of monomers in the bilayer followed by removal of surfactant scaffolds.

Synergistic self-assembly of scaffolds and building blocks for directed synthesis of organic nanomaterials.

Surfactants and hydrophobic monomers spontaneously assemble into vesicles containing monomers within the bilayer. The joint action of monomers and surfactants is essential in this synergistic self-assembly. Polymerization in the bilayer formed hollow polymer nanocapsules.

Characterization of swellable molecularly imprinted polymer particles by surface plasmon resonance spectroscopy.

Surface plasmon resonance (SPR) has been used to investigate template binding at sites in theophylline-imprinted poly-[N-(N-propyl) acrylamide] particles. At concentrations as low as 10(-6) M theophylline, particle swelling is detected as a shift in the angle of minimum reflectance. The binding constant of theophylline estimated from the inflection point of the theophylline calibration curve is approximately 10,000. The imprinted polymer particles do not respond to caffeine or theobromine (which differs from theophylline by a single methyl group) at concentrations as high as 10(-2) M. Full-scale response of the imprinted polymer particles to theophylline (template) occurs in less than 15 minutes, and swelling is reversible. The immobilized imprinted polymer particles can undergo approximately 20 to 25 swelling and shrinking cycles before there is significant loss in functionality. A unique aspect of these imprinted polymer particles is that template binding causes the angle of minimum reflectance to decrease, not increase, in magnitude. Adsorption, which causes an increase in the angle of minimum reflectance, can be readily discriminated from template binding.

Dye-loaded porous nanocapsules immobilized in a permeable polyvinyl alcohol matrix: a versatile optical sensor platform.

In this work we report on a versatile sensor platform based on encapsulated indicator dyes. Dyes are entrapped in hollow nanocapsules with nanometer-thin walls of controlled porosity. The porous nanocapsules retain molecules larger than the pore size but provide ultrafast access to their interior for molecules and ions smaller than the pore size. Dye-loaded nanocapsules are immobilized in a polyvinyl alcohol (PVA) matrix with high solvent permeability and rapid analyte diffusion. This approach provides robust sensing films with fast response and extended lifetime. To demonstrate the performance characteristics of such films, pH-sensitive indicator dyes were entrapped in vesicle-templated nanocapsules prepared by copolymerization of tert-butyl methacrylate, butyl methacrylate, and ethylene glycol dimethacrylate. As pH sensitive dyes, Nile blue A, bromophenol blue, and acid fuchsin were tested. Time-resolved absorbance measurements showed that the rate of the color change is controlled by the rate of diffusion of protons in the hydrogel. The pH-induced color change in a ~400 µm thick film is complete within 40 and 60 s. The porous nanocapsule loaded films showed excellent stability and reproducibility in long-term monitoring experiments. Compartmentalization of the indicator dyes within the nanocapsules increased their stability. The matrix caused a shift in the position of the color change of the dye compared to that in an aqueous buffer solution. The encapsulation/immobilization protocol described in this account is expected to be broadly applicable to a variety of indicator dyes in optical sensor applications.