Nanocrystal Formulation to Enhance Oral Absorption of Silybin: Preparation, In Vitro Evaluations, and Pharmacokinetic Evaluations in Rats and Healthy Human Subjects.

Despite the various therapeutic benefits and high tolerance of orally administered silybin, poor water-solubility can be the main restrictive physicochemical feature, which results in low oral bioavailability in the absorption. A milk thistle nanocrystal formulation (HM40) was prepared using a modified wet-milling method. Comprehensive characterization was performed to determine the physical morphology, crystallinity, and physicochemical properties. The long-term stability was evaluated over 24 months. In vitro silybin release was assessed at pH 1.2 for 2 h, followed by pH 6.8 for 4 h. Finally, in vivo pharmacokinetic studies were conducted in rats and healthy human volunteers. HM40 exhibited a nanocrystal structure maintaining crystallinity and enhanced the solubility and dissolution of silybin compared to that of the raw material. The stability over 24 months revealed consistent surface morphology, particle size, silybin content, and solubility. In vitro release profiles indicated a significant increase in the silybin release from HM40. In vivo pharmacokinetic studies demonstrated that HM40 showed 2.61- and 1.51-fold higher oral bioavailability in rats and humans, respectively, than that of the reference capsule. HM40 formulation presents a stable and promising approach for the oral delivery of poorly water-soluble silybin, with the potential for use in pharmaceutical formulations containing milk thistle.

Preparation and evaluation of proliposomes formulation for enhancing the oral bioavailability of ginsenosides.

Background: This research main objective was to evaluate a proliposomes (PLs) formulation for the enhancement of oral bioavailability of ginsenosides, using ginsenoside Rg3 (Rg3) as a marker. Methods: A novel PLs formulation was prepared using a modified evaporation-on-matrix method. Soy phosphatidylcholine, Rg3-enriched extract, poloxamer 188 (Lutrol® F 68) and sorbitol were mixed and dissolved using a aqueous ethanolic solution, followed by the removal of ethanol and lyophilization. The characterization of Rg3-PLs formulations was performed by powder X-ray diffractometry (PXRD), transmission electron microscopy (TEM) and in vitro release. The enhancement of oral bioavailability was investigated and analyzed by non-compartmental parameters after oral administration of the formulations. Results: PXRD of Rg3-PLs indicated that Rg3 was transformed from crystalline into its amorphous form during the preparation process. The Rg3-encapsulated liposomes with vesicular-shaped morphology were generated after the reconstitution by gentle hand-shaking in water; they had a mean diameter of approximately 350 nm, a negative zeta potential (-28.6 mV) and a high entrapment efficiency (97.3%). The results of the in vitro release study exhibited that significantly more amount of Rg3 was released from the PLs formulation in comparison with that from the suspension of Rg3-enriched extract (control group). The pharmacokinetic parameters after oral administration of PLs formulation in rats showed an approximately 11.8-fold increase in the bioavailability of Rg3, compared to that of the control group. Conclusion: The developed PLs formulation could be a favorable delivery system to improve the oral bioavailability of ginsenosides, including Rg3.

Development of ropivacaine hydrochloride-loaded dissolving microneedles as a local anesthetic agent: A proof-of-concept.

Ropivacaine hydrochloride (RPL) is a local anesthetic agent that has been widely used for the treatment of pain during or after surgery. However, this drug is only available in parenteral dosage form and may contribute to the infiltration of RPL into the plasma, causing some undesirable side effects. Intradermal delivery of RPL using dissolving microneedles may become a promising strategy to deliver such drugs into the skin. This research aimed to develop RPL-loaded dissolving microneedles (DMN-RPLs) as a proof of the concept of intradermal delivery of a local anesthetic. The DMN-RPLs were fabricated using either centrifugation or air-pressurized chamber methods. Several polymers, such as poly(vinyl pyrrolidone) (PVP), poly(vinyl alcohol) (PVA), and sodium hyaluronate (SH), were utilized for manufacturing the DMN-RPLs. The prepared DMN-RPLs were assessed for their thermal properties, chemical bonds, mechanical strength, insertion ability, skin-dissolution study, and drug content. Furthermore, in-skin deposition and dermatokinetic studies were also performed. The results showed that F9 (30 % w/w PVP-4 % w/w SH) and F10 (30 % w/w PVP-5 % w/w PVA) containing 5 % w/w of RPL were the most promising formulations, as shown by their needle height reduction (<10 %) and insertion depth (∼400 µm). Both formulations were also able to deliver more than 60 % of the RPL contained in the DMNs into the epidermis, dermis, and receiver compartment. This study, for the first time, has provided a proof concept to deliver RPL as a local anesthetic using DMNs and the intradermal route, aiming to minimize pain and discomfort during administration and improve the patient's experience.

Position error-free control of magnetic domain-wall devices via spin-orbit torque modulation.

Magnetic domain-wall devices such as racetrack memory and domain-wall shift registers facilitate massive data storage as hard disk drives with low power portability as flash memory devices. The key issue to be addressed is how perfectly the domain-wall motion can be controlled without deformation, as it can replace the mechanical motion of hard disk drives. However, such domain-wall motion in real media is subject to the stochasticity of thermal agitation with quenched disorders, resulting in severe deformations with pinning and tilting. To sort out the problem, we propose and demonstrate a new concept of domain-wall control with a position error-free scheme. The primary idea involves spatial modulation of the spin-orbit torque along nanotrack devices, where the boundary of modulation possesses broken inversion symmetry. In this work, by showing the unidirectional motion of domain wall with position-error free manner, we provide an important missing piece in magnetic domain-wall device development.

Biotransformation of d-Xylose-Rich Rice Husk Hydrolysate by a Rice Paddy Soil Bacterium, Priestia sp. Strain JY310, to Low Molecular Weight Poly(3-hydroxybutyrate).

Poly(3-hydroxybutyrate) (PHB) is a versatile thermoplastic with superior biodegradability and biocompatibility that is intracellularly accumulated by numerous bacterial and archaeal species. Priestia sp. strain JY310 that was able to efficiently biotransform reducing sugars in d-xylose-rich rice husk hydrolysate (reducing sugarRHH) to PHB was isolated from the soil of a rice paddy. Reducing sugarRHH including 12.5% d-glucose, 75.3% d-xylose, and 12.2% d-arabinose was simply prepared using thermochemical hydrolysis of 3% H2SO4-treated rice husk for 15 min at 121 °C. When cultured with 20 g/L reducing sugarRHH under optimized culture conditions in a batch bioreactor, Priestia sp. strain JY310 could produce PHB homopolymer up to 50.4% of cell dry weight (6.2 g/L). The melting temperature, heat of fusion, and thermal decomposition temperature of PHB were determined to be 167.9 °C, 92.1 J/g, and 268.1 °C, respectively. The number average and weight average molecular weights of PHB with a broad polydispersity index value (4.73) were estimated to be approximately 16.2 and 76.8 kg/mol, respectively. The findings of the present study suggest that Priestia sp. strain JY310 can be exploited as a good candidate for the low-cost production of low molecular weight PHB with improved biodegradability and reduced brittleness from inexpensive agricultural waste hydrolysates.

Combined Orobol-Bentonite Composite Formulation for Effective Topical Skin Targeted Therapy in Mouse Model.

Purpose: Orobol is an isoflavone that has a potent skin protection effect. The objective of this study was to prepare a novel bentonite-based composite formulation of orobol to enhance topical skin delivery. Methods: The composition was optimized based on the orobol content in the composite and the in vitro release studies, followed by the in vitro and in vivo hairless mouse skin deposition studies. Physicochemical characterizations of the composite formulation were performed by powder X-ray refractometry (XRD) and scanning electron microscopy (SEM). The in vitro cytotoxicity and in vivo toxicity studies were conducted in human keratinocytes and in hairless mouse, respectively. Results and Discussions: The in vitro release of orobol from the bentonite composites was higher than that from the suspension, which was further increased with the addition of phosphatidylcholine. The composite formulation significantly enhanced the in vitro and in vivo skin deposition of orobol in hairless mouse skin compared to the orobol suspension. Moreover, the addition of phosphatidyl choline not only improved the dissolution and incomplete release of orobol from the bentonite composite but also enhanced the deposition of orobol in the skin. XRD histograms and SEM images confirmed that the enhanced dissolution of orobol from the composite was attributed to its amorphous state on bentonite. The in vitro and in vivo toxicity studies support the safety and biocompatibility of the orobol-loaded bentonite composite formulation. Conclusion: These findings suggest that the orobol-loaded bentonite composite formulation could be a potential topical skin delivery system for orobol.

Donepezil hydrochloride-reinforced cellulose nanocrystal-aggregated gel structure for long-acting drug delivery.

A donepezil hydrochloride (DPZ)-reinforced cellulose nanocrystal (CNC) hydrogel structure with pH control was developed for sustained drug delivery through subcutaneous injection. In the present study, an aggregated CNC gel was fabricated by reducing the electrostatic repulsion between CNC particles by incorporating DPZ and adjusting the pH value to 7.7. The crosslinked CNC/DPZ (cCNC/DPZ) gel exhibited immediate gelation, injection capability through a single syringe, improved viscoelasticity, and shear-thinning properties. Interactions between the CNCs and DPZ and pH regulation were assessed using several solid-state studies, and a sustained release profile of the DPZ from the cCNC/DPZ gel was also observed. In the pharmacokinetic study, a higher half-life and mean residence time and lower maximum drug concentration values were obtained in the cCNC/DPZ group than in the DPZ solution and CNC/DPZ groups after subcutaneous injection. Drug salt form-incorporated and pH-controlled CNC hydrogel systems can be safely applied to the subcutaneous delivery of DPZ.

SKI-G-801, an AXL kinase inhibitor, blocks metastasis through inducing anti-tumor immune responses and potentiates anti-PD-1 therapy in mouse cancer models.

OBJECTIVES: AXL-mediated activation of aberrant tyrosine kinase drives various oncogenic processes and facilitates an immunosuppressive microenvironment. We evaluated the anti-tumor and anti-metastatic activities of SKI-G-801, a small-molecule inhibitor of AXL, alone and in combination with anti-PD-1 therapy. METHODS: In vitro pAXL inhibition by SKI-G-801 was performed in both human and mouse cancer cell lines. Immunocompetent mouse models of tumor were established to measure anti-metastatic potential of SKI-G-801. Furthermore, SKI-G-801, anti-PD-1 or their combination was administered as an adjuvant or neoadjuvant in the 4T1 tumor model to assess their potential for clinical application. RESULTS: SKI-G-801 robustly inhibited pAXL expression in various cell lines. SKI-G-801 alone or in combination with anti-PD-1 potently inhibited metastasis in B16F10 melanoma, CT26 colon and 4T1 breast models. SKI-G-801 inhibited the growth of B16F10 and 4T1 tumor-bearing mice but not immune-deficient mice. An antibody depletion assay revealed that CD8+ T cells significantly contributed to SKI-G-801-mediated survival. Anti-PD-1 and combination group were observed the increased CD8+Ki67+ and effector T cells and M1 macrophage and decreased M2 macrophage, and granulocytic myeloid-derived suppressor cell (G-MDSC) compared to the control group. The neoadjuvant combination of SKI-G-801 and anti-PD-1 therapy achieved superior survival benefits by inducing more profound T-cell responses in the 4T1 syngeneic mouse model. CONCLUSION: SKI-G-801 significantly suppressed tumor metastasis and growth by enhancing anti-tumor immune responses. Our results suggest that SKI-G-801 has the potential to overcome anti-PD-1 therapy resistance and allow more patients to benefit from anti-PD-1 therapy.

Sodium and water perturbations in patients who had an acute stroke: clinical relevance and management strategies for the neurologist.

Sodium and water perturbations, manifesting as hyponatraemia and hypernatraemia, are common in patients who had an acute stroke, and are associated with worse outcomes and increased mortality. Other non-stroke-related causes of sodium and water perturbations in these patients include underlying comorbidities and concomitant medications. Additionally, hospitalised patients who had an acute stroke may receive excessive intravenous hypotonic solutions, have poor fluid intake due to impaired neurocognition and consciousness, may develop sepsis or are administered drugs (eg, mannitol); factors that can further alter serum sodium levels. Sodium and water perturbations can also be exacerbated by the development of endocrine consequences after an acute stroke, including secondary adrenal insufficiency, syndrome of inappropriate antidiuretic hormone secretion and diabetes insipidus. Recently, COVID-19 infection has been reported to increase the risk of development of sodium and water perturbations that may further worsen the outcomes of patients who had an acute stroke. Because there are currently no accepted consensus guidelines on the management of sodium and water perturbations in patients who had an acute stroke, we conducted a systematic review of the literature published in English and in peer-reviewed journals between January 2000 and December 2020, according to PRISMA guidelines, to assess on the current knowledge and clinical practices of this condition. In this review, we discuss the signs and symptoms of hyponatraemia and hypernatraemia, the pathogenesis of hyponatraemia and hypernatraemia, their clinical relevance, and we provide our recommendations for effective treatment strategies for the neurologist in the management of sodium and water perturbations in commonly encountered aetiologies of patients who had an acute stroke.

Development of the phenylpyrazolo[3,4-d]pyrimidine-based, insulin-like growth factor receptor/Src/AXL-targeting small molecule kinase inhibitor.

Rationale: The type I insulin-like growth factor receptor (IGF-1R) signaling pathway plays key roles in the development and progression of numerous types of human cancers, and Src and AXL have been found to confer resistance to anti-IGF-1R therapies. Hence, co-targeting Src and AXL may be an effective strategy to overcome resistance to anti-IGF-1R therapies. However, pharmacologic targeting of these three kinases may result in enhanced toxicity. Therefore, the development of novel multitarget anticancer drugs that block IGF-1R, Src, and AXL is urgently needed. Methods: We synthesized a series of phenylpyrazolo[3,4-d]pyrimidine (PP)-based compounds, wherein the PP module was conjugated with 2,4-bis-arylamino-1,3-pyrimidines (I2) via a copper(I)-catalyzed alkyne-azide cycloaddition reaction. To develop IGF-1R/Src/AXL-targeting small molecule kinase inhibitors, we selected LL6 as an active compound and evaluated its antitumor and antimetastatic effects in vitro and in vivo using the MTT assay, colony formation assays, migration assay, flow cytometric analysis, a tumor xenograft model, the KrasG12D/+ -driven spontaneous lung tumorigenesis model, and a spontaneous metastasis model using Lewis lung carcinoma (LLC) allografts. We also determined the toxicity of LL6 in vitro and in vivo. Results: LL6 induced apoptosis and suppressed viability and colony-forming capacities of various non-small cell lung cancer (NSCLC) cell lines and their sublines with drug resistance. LL6 also suppressed the migration of NSCLC cells at nontoxic doses. Administration of LL6 in mice significantly suppressed the growth of NSCLC xenograft tumors and metastasis of LLC allograft tumors with outstanding toxicity profiles. Furthermore, the multiplicity, volume, and load of lung tumors in KrasG12D/+ transgenic mice were substantially reduced by the LL6 treatment. Conclusions: Our results show the potential of LL6 as a novel IGF-1R/Src/AXL-targeting small molecule kinase inhibitor, providing a new avenue for anticancer therapies.

Hyaluronidase Inhibitor-Incorporated Cross-Linked Hyaluronic Acid Hydrogels for Subcutaneous Injection.

Hyaluronidase (HAase) inhibitor-incorporated hyaluronic acid (HA) hydrogel cross-linked with 1,4-butanediol diglycidyl ether (BDDE) was designed to reduce the toxicity risk induced by BDDE and its biodegradation rate in subcutaneous tissue. The formulation composition of hydrogel and its preparation method were optimized to have a high swelling ratio and drug content. Quercetin (QCT) and quetiapine (QTP), as an HAase inhibitor and model drug, respectively, were incorporated into the cross-linked hydrogel using the antisolvent precipitation method for extending their release after subcutaneous injection. The cross-linked HA (cHA)-based hydrogels displayed appropriate viscoelasticity and injectability for subcutaneous injection. The incorporation of QCT (as an HAase inhibitor) in the cHA hydrogel formulation resulted in slower in vitro and in vivo degradation profiles compared to the hydrogel without QCT. Single dosing of optimized hydrogel injected via a subcutaneous route in rats did not induce any acute toxicities in the blood chemistry and histological staining studies. In the pharmacokinetic study of rats following subcutaneous injection, the cHA hydrogel with QCT exhibited a lower maximum QTP concentration and longer half-life and mean residence time values compared to the hydrogel without QCT. All of these results support the designed HAase inhibitor-incorporated cHA hydrogel being a biocompatible subcutaneous injection formulation for sustained drug delivery.

Monopotassium phosphate-reinforced in situ forming injectable hyaluronic acid hydrogels for subcutaneous injection.

Monopotassium phosphate and pH modulation-reinforced hydrogel based on hyaluronic acid (HA) grafted with dopamine (dopa) was fabricated as one of subcutaneous injection formulations of donepezil (DPZ). Both incorporation of KH2PO4 and pH adjustment finally attributed to tuning viscoelastic and biodegradable properties of hydrogel system. Appropriate gelation time for in situ gel formation, single syringe injectability, self-healing capability, and viscoelastic features were accomplished with the optimization of KH2PO4 concentration in hydrogel systems. DPZ base (as a poorly water soluble drug) was encapsulated in poly(lactic-co-glycolic acid) (PLGA) microsphere (MS) and it was further embedded in the hydrogel structure for sustained drug release. Biodegradability of designed KH2PO4-incorporated HA-dopa/DPZ MS hydrogel system was assessed by optical imaging and the remained gel weight of crosslinked HA-dopa hydrogel group was 3.4-fold higher than that of unmodified HA-dopa mixture group on day 14 (p < 0.05). Subcutaneous injection of KH2PO4-incorporated HA-dopa/DPZ MS hydrogel did not induce any severe systemic toxicities. All these data suggest that designed HA-dopa/DPZ MS hydrogel structure crosslinked by KH2PO4 incorporation and pH adjustment can be one of promising subcutaneous injection formulations for sustained drug delivery.

Lipid Nanoparticles for Enhancing the Physicochemical Stability and Topical Skin Delivery of Orobol.

Orobol is one of the major soy isoflavones, and has been reported to have various pharmacological activities, including an anti-skin-aging effect. However, since it has low solubility in water and physicochemical instability, the formulation of orobol for delivery into the dermal layer of the skin could be challenging. The objective of this study was to prepare lipid nanoparticles formulations of orobol to enhance its stability as well as its deposition into the skin. Formulations of orobol-loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) were characterized in terms of their mean particle size, entrapment efficiency, and morphology. The nano-sized spherical NLCs formulations maintained the stability of orobol for up to 28 days. Moreover, the NLCs formulation significantly increased the in vitro deposition of orobol into both Strat-M membranes and human cadaver skin compared with the other formulations. Additionally, the NLCs formulation did not cause significant skin irritation in clinical study. These results demonstrate that a shea butter-based NLC formulation could be a promising and safe carrier system for improving the stability of orobol and enhancing its topical skin delivery.

Preparation and Evaluation of Eudragit L100-PEG Proliponiosomes for Enhanced Oral Delivery of Celecoxib.

PEGylated Eudragit L100 (ELP)-containing proliponiosomes (PLNs) were developed for improved oral delivery of celecoxib (CXB). The successful introduction of PEG 2000 or 5000 to Eudragit L100 (EL) was confirmed via proton nuclear magnetic resonance analysis of which calculated molar substitution ratio of PEG to EL was 36.0 or 36.7, respectively. CXB, ELP, phospholipid, and non-ionic surfactants were dissolved in dimethyl sulfoxide and lyophilized to produce CXB-loaded PLNs (CXB@PLNs). The physical state of CXB@PLNs was evaluated using differential scanning calorimetry and powder X-ray diffractometry, which revealed that crystalline CXB was transformed into amorphous form after the fabrication procedure. The reconstitution of CXB@PLNs in aqueous media generated CXB-loaded liponiosomes with nano-sized mean diameters and spherical morphology. CXB@PLNs displayed enhanced dissolution rate and permeability compared to CXB suspension. In vivo pharmacokinetic studies performed on rats demonstrated the improved oral bioavailability of CXB@PLNs compared to that of CXB suspension. No serious systemic toxicity was observed in the blood biochemistry tests performed on rats. These results suggest that the developed PLNs could be promising oral delivery systems for improving the bioavailability of poorly water-soluble drugs, such as CXB.

Development and Validation of Liquid Chromatography-Tandem Mass Spectrometry Method for Pharmacokinetic Evaluation of 7ß-(3-Ethyl-cis-crotonoyloxy)-1α-(2-methylbutyryloxy)-3,14-dehydro-Z-notonipetranon in Rats.

Recently, potent neuroprotective and anti-diabetic effects of 7ß-(3-Ethyl-cis-crotonoyloxy)-1α-(2-methylbutyryloxy)-3,14-dehydro-Z-notonipetranone (ECN), a sesquiterpenoid isolated from Tussilago farfara Linnaeus, have been elucidated. To facilitate further pre-clinical evaluation in rats, an analytical method for the determination of ECN in rat plasma was developed and optimized by using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Plasma samples were pretreated by the protein precipitation method with an acetonitrile solution of losartan (LST) as the internal standard. Chromatographic separation was performed using a an Octadecyl-silica (ODS) column (2.6 µm, 100 x 4.6 mm) in the isocratic mode. The mobile phase, comprising 10 mM ammonium formate in water pH 5.75) and acetonitrile (11:89, v/v), was eluted at a flow rate of 0.4 mL/min. Mass spectrometric detection was performed in the multiple reaction monitoring mode with positive electrospray ionization, and the mass transitions of ECN and LST were m/z 431.3 to 97.3 and m/z 423.1 to 207.2, respectively. The calibration curves of spiked plasma samples were linear in the 10.0-10,000 ng/mL range (r2 > 0.996). The lower limit of quantification (LLOQ) was determined as 10.0 ng/mL. Validation was conducted in the LLOQ, and three quality control (QC) sample levels (10.0, 25.0, 3750, and 7500 ng/mL) were studied. Among them, the relative standard deviation for the within- and between-run precisions was under 9.90%, and the relative error of the accuracies was within the -8.13% to 0.42% range. The validated method was successfully employed to investigate the pharmacokinetic properties of ECN in rats, which revealed the linear pharmacokinetic behavior of ECN for the first time.

Ferrous sulfate-directed dual-cross-linked hyaluronic acid hydrogels with long-term delivery of donepezil.

Ferrous sulfate (FeSO4)-directed dual-cross-linked hydrogels were designed for application in single-syringe injections. The use of FeSO4, rather than other iron salts, can modulate the gelation time and make it available for subcutaneous injection with a single syringe. These hydrogels are based on hyaluronic acid-dopamine (HA-dp) that contain donepezil (DPZ)-entrapping poly(lactic-co-glycolic acid) (PLGA) microsphere (MS). Although DPZ has been administered orally, its sustained release formulation via subcutaneous injection may reduce the dosing frequency for patients with Alzheimer's disease. The HA-dp conjugate was synthesized via an amide bond reaction for coordination of dp with a metal ion (Fe2+ or Fe3+) and self-polymerization of dp. The HA-dp/DPZ-loaded PLGA MS (PD MS)/FeSO4 gel system was considerably hardened via both the coordination of the metal ion with HA-dp and covalent bonding of dp. In addition, a quick restoration of the collapsed gel structure and sustained DPZ release from the HA-dp/PD MS/FeSO4 structure were achieved. The pharmacokinetic parameters after its subcutaneous injection in a rat indicate the sustained release and absorption of DPZ from the HA-dp/PD MS/FeSO4 system. The proposed system can be prepared by a simple method and can be efficiently and safely used for the long-term delivery of DPZ after the subcutaneous injection.

Formulation And Evaluation Of Nanostructured Lipid Carriers (NLCs) Of 20(S)-Protopanaxadiol (PPD) By Box-Behnken Design.

BACKGROUND: 20(S)-Protopanaxadiol (PPD) has a higher anti-wrinkle effect than the other glycone forms of ginsenosides. However, as PPD has low solubility in water and a high molecular weight, it cannot easily penetrate the stratum corneum layer, which is the rate-limiting step of topical skin delivery. Thus, the objective was to enhance the topical skin deposition of PPD using an optimized nanostructured lipid carriers (NLC) formulation. NLC formulations were optimized using a Box-Behnken design. MATERIALS AND METHODS: NLC formulations were optimized using a Box-Behnken design, where the amount of PDD (X1), volume of the liquid lipid (X2), and amount of surfactant (X3) were set as the independent variables, while the particle size (Y1), polydispersity index (PDI) (Y2), and entrapment efficiency (EE) (Y3) were dependent factors. An in vitro deposition study was performed using Strat-M® and human cadaver skin, while in vivo skin irritation effect of the NLC formulation was evaluated in humans. RESULTS: An NLC was successfully prepared based on the optimized formulation determined using the Box-Behnken design. The particle size, PDI, and EE of the NLC showed less than 5% difference from the predicted values. The in vitro deposition of PPD after the application of the NLC formulation on a Strat-M® artificial membrane and human cadaver skin was significantly higher than that of the controls. Moreover, NLC formulations with and without PDD were not skin irritants in a human study. CONCLUSION: An NLC formulation for the topical delivery of PPD was successfully optimized using the Box-Behnken design, and could be further developed to enhance the topical skin deposition of PPD.

Comparison of the Protective Effects of Bee Venom Extracts with Varying PLA2 Compositions in a Mouse Model of Parkinson's Disease.

Bee venom contains a number of pharmacologically active components, including enzymes and polypeptides such as phospholipase A2 (PLA2) and melittin, which have been shown to exhibit therapeutic benefits, mainly via attenuation of inflammation, neurotoxicity, and nociception. The individual components of bee venom may manifest distinct biological actions and therapeutic potential. In this study, the potential mechanisms of action of PLA2 and melittin, among different compounds purified from honey bee venom, were evaluated against Parkinson's disease (PD). Notably, bee venom PLA2 (bvPLA2), but not melittin, exhibited neuroprotective activity against PD in a 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) mouse model of PD. MPTP-induced behavioral deficits were also abolished after bvPLA2 treatment, depending on the PLA2 content. Further, bvPLA2 administration activated regulatory T cells (Tregs) while inhibiting inflammatory T helper (Th) 1 and Th17 cells in the MPTP mouse model of PD. These results indicate that bvPLA2, but not melittin, protected against MPTP and alleviated inflammation in PD. Thus, bvPLA2 is a promising and effective therapeutic agent in Parkinson's disease.

Microemulsion-based hydrogels for enhancing epidermal/dermal deposition of topically administered 20(S)-protopanaxadiol: in vitro and in vivo evaluation studies.

BACKGROUND: 20(S)-Protopanaxadiol (20S-PPD) is a fully deglycosylated ginsenoside metabolite and has potent dermal antiaging activity. However, because of its low aqueous solubility and large molecular size, a suitable formulation strategy is required to improve its solubility and skin permeability, thereby enhancing its skin deposition. Thus, we optimized microemulsion (ME)-based hydrogel (MEH) formulations for the topical delivery of 20S-PPD. METHODS: MEs and MEHs were formulated and evaluated for their particle size distribution, morphology, drug loading capacity, and stability. Then, the deposition profiles of the selected 20S-PPD-loaded MEH formulation were studied using a hairless mouse skin model and Strat-M membrane as an artificial skin model. RESULTS: A Carbopol-based MEH system of 20S-PPD was successfully prepared with a mean droplet size of 110 nm and narrow size distribution. The formulation was stable for 56 d, and its viscosity was high enough for its topical application. It significantly enhanced the in vitro and in vivo skin deposition of 20S-PPD with no influence on its systemic absorption in hairless mice. Notably, it was found that the Strat-M membrane provided skin deposition data well correlated to those obtained from the in vitro and in vivo mouse skin studies on 20S-PPD (correlation coefficient r 2 = 0.929‒0.947). CONCLUSION: The MEH formulation developed in this study could serve as an effective topical delivery system for poorly soluble ginsenosides and their deglycosylated metabolites, including 20S-PPD.

Curcumin-loaded lipid-hybridized cellulose nanofiber film ameliorates imiquimod-induced psoriasis-like dermatitis in mice.

Cellulose nanofiber (CNF) is an attractive biomaterial given its film-forming properties, excellent mechanical properties and biocompatibility. Herein, CNF film was prepared as a topical drug delivery system by hybridizing curcumin (Cur)-loaded nanostructured lipid carriers (NLCs). NLCs with a mean diameter of ≈500 nm were fabricated by using a solvent diffusion method. The lipid composition of the NLCs was optimized based on the efficiency of Cur delivery to the artificial skin and mechanical strength of the developed films, where a composition containing shea butter and Capmul MCM EP exhibited the highest values of 233.2 ±â€¯96.6 µg/cm2/mg and 4.86 ±â€¯0.14 MPa, respectively. The Cur-loaded lipid-hybridized CNF (lipid@CNF) films with a smooth rather than particle-embedded surface were obtained by vacuum filtration of the NLCs and CNF mixture, which were confirmed by TEM, SEM, AFM, XPS, and FTIR analyses. The Cur-loaded lipid@CNF films exhibited more than 2.0-fold increases in Cur deposition to the epidermis of imiquimod (IMQ)-induced psoriatic mouse compared with the films without lipids, which potentially resulted from the amorphous state of Cur observed in the DSC and PXRD analyses and the permeation-enhancing effect of lipids. The in vivo anti-psoriatic efficacy test revealed that the Cur-loaded lipid@CNF films ameliorated the psoriatic skin symptoms in IMQ-induced mice, reducing the pro-inflammatory cytokine levels in the skin almost comparable to a commercially available topical corticosteroid cream. These results could be attributed to the enhanced Cur deposition along with the skin hydration effect of the films. These findings suggest that the developed CNF films can be used as a promising topical drug delivery system for psoriasis therapy.