Cryptographic transistor for true random number generator with low power consumption.

We design a cryptographic transistor (cryptoristor)-based true random number generator (tRNG) with low power consumption and small footprint. This is the first attempt to use irregular and unpredictable operation-induced randomness of a cryptoristor as an entropy source. To extract discrete random numbers with a binary code from the cryptoristor, we developed a noise-coupling analog-to-digital converter. This converter not only converts analog signals to digital random bits but also improves the randomness of the entropy source with low power consumption. The randomness of the cryptoristor is attributed to the random carrier multiplications with the creation and stochastic carrier escape as destruction, which occurs iteratively as long as the input current is fed. The cryptoristor-based tRNG passed 15 randomness test suites of NIST Special Publication 800-22. It is robust to iterative operational stresses and to ambient temperature changes, making it an attractive option for hardware-based security solutions in the Internet of Things due to its low power consumption and small size.

Cryptographic triboelectric random number generator with gentle breezes of an entropy source.

A wind-driven triboelectric nanogenerator (W-TENG) is a promising energy harvesting device due to its clean, ubiquitous and unexhausted properties. In addition, a W-TENG induces unpredictable chaotic outputs from wind flow that can serve as an entropy source for cryptography. This can be applied to a true random number generator (TRNG) for a secured system due to its inherent turbulent nature; thus, a W-TENG with a two-in-one structure can simultaneously generate both power and true random numbers. However, a previously reported W-TENG had one major drawback: a wind velocity of 10 m/s is required for stable energy harvesting by wind force. Thus, it is timely to demonstrate a W-TENG-based RNG whose operating condition is below 3 m/s, which is a gentle breeze similar to natural wind. In this study, we demonstrate a wind-driven cryptographic triboelectric random number generator (WCT-RNG) by using a W-TENG whose operating condition for wind speed is below 3 m/s by adopting a rear-fixed film structure instead of a conventional structure. The rear-fixed film refers to the fluttering film being freestanding on the front-side and fixed on the rear-side, where the front- and rear-sides are the wind inlet and outlet, respectively. The WCT-RNG enables the W-TENG to operate below a 3 m/s wind velocity. Because of this, the working time of the WCT-RNG is dramatically enhanced from only 8-42% at an average altitude above sea level. As the capability of operating at low wind speeds is significantly improved, a WCT-RNG becomes more useful and practical for generating both power and true random numbers in a single device. The device can thereby lead to the construction of a self-powered TRNG and secure communication for Internet of Things (IoT) devices in various environments, even under a gentle breeze. In this study, we explain the design of a WCT-RNG structure and also evaluate its randomness by using an NIST SP 800-22 B test suite with a reliability test.

Analyses of unpredictable properties of a wind-driven triboelectric random number generator.

Wind-driven triboelectric nanogenerators (W-TENGs) are a promising candidate for an energy harvester because wind itself possesses unexhausted, ubiquitous, and clean properties. W-TENG has also been used as a random number generator (RNG) due to the inherent chaotic properties of wind that is also an entropy source. Thus, a W-TENG which simultaneously generates both power and true random numbers with a two-in-one structure, is a wind-driven RNG (W-RNG) like the Janus. However, a root cause of W-RNG unpredictability has not been elucidated. In this work, the unpredictability, which is essential and critical for an RNG, is statistically and mathematically analyzed by auto-correlation, cross-correlation, joint entropy, and mutual information. Even though the overall shape of the total output analog signals from the W-RNG looks like a sinusoidal wave that is not obviously unpredictable, discretized digital signals from the continuous analog output become unpredictable. Furthermore, partial adoption of 4-bit data from 8-bit raw data, with the aid of analog-to-digital converter hardware, further boosts the unpredictability. The W-RNG, which functions as a W-TENG, can contribute to self-powering and self-securing outdoor electrical systems, such as drones, by harvesting energy and generating true random numbers.

Exploiting volumetric wave correlation for enhanced depth imaging in scattering medium.

Imaging an object embedded within a scattering medium requires the correction of complex sample-induced wave distortions. Existing approaches have been designed to resolve them by optimizing signal waves recorded in each 2D image. Here, we present a volumetric image reconstruction framework that merges two fundamental degrees of freedom, the wavelength and propagation angles of light waves, based on the object momentum conservation principle. On this basis, we propose methods for exploiting the correlation of signal waves from volumetric images to better cope with multiple scattering. By constructing experimental systems scanning both wavelength and illumination angle of the light source, we demonstrated a 32-fold increase in the use of signal waves compared with that of existing 2D-based approaches and achieved ultrahigh volumetric resolution (lateral resolution: 0.41 [Formula: see text], axial resolution: 0.60 [Formula: see text]) even within complex scattering medium owing to the optimal coherent use of the broad spectral bandwidth (225 nm).

Recent advances in optical imaging through deep tissue: imaging probes and techniques.

Optical imaging has been essential for scientific observations to date, however its biomedical applications has been restricted due to its poor penetration through tissues. In living tissue, signal attenuation and limited imaging depth caused by the wave distortion occur because of scattering and absorption of light by various molecules including hemoglobin, pigments, and water. To overcome this, methodologies have been proposed in the various fields, which can be mainly categorized into two stategies: developing new imaging probes and optical techniques. For example, imaging probes with long wavelength like NIR-II region are advantageous in tissue penetration. Bioluminescence and chemiluminescence can generate light without excitation, minimizing background signals. Afterglow imaging also has high a signal-to-background ratio because excitation light is off during imaging. Methodologies of adaptive optics (AO) and studies of complex media have been established and have produced various techniques such as direct wavefront sensing to rapidly measure and correct the wave distortion and indirect wavefront sensing involving modal and zonal methods to correct complex aberrations. Matrix-based approaches have been used to correct the high-order optical modes by numerical post-processing without any hardware feedback. These newly developed imaging probes and optical techniques enable successful optical imaging through deep tissue. In this review, we discuss recent advances for multi-scale optical imaging within deep tissue, which can provide reseachers multi-disciplinary understanding and broad perspectives in diverse fields including biophotonics for the purpose of translational medicine and convergence science. Methodologies for multi-scale optical imaging within deep tissues are discussed in diverse fields including biophotonics for the purpose of translational medicine and convergence science. Recent imaging probes have tried deep tissue imaging by NIR-II imaging, bioluminescence, chemiluminescence, and afterglow imaging. Optical techniques including direct/indirect and coherence-gated wavefront sensing also can increase imaging depth.

Synaptic Segmented Transistor with Improved Linearity by Schottky Junctions and Accelerated Speed by Double-Layered Nitride.

Neuromorphic devices have been extensively studied to overcome the limitations of a von Neumann system for artificial intelligence. A synaptic device is one of the most important components in the hardware integration for a neuromorphic system because a number of synaptic devices can be connected to a neuron with compactness as high as possible. Therefore, synaptic devices using silicon-based memory, which are advantageous for a high packing density and mass production due to matured fabrication technologies, have attracted considerable attention. In this study, a segmented transistor devoted to an artificial synapse is proposed for the first time to improve the linearity of the potentiation and depression (P/D). It is a complementary metal oxide semiconductor (CMOS)-compatible device that harnesses both non-ohmic Schottky junctions of the source and drain for improved weight linearity and double-layered nitride for enhanced speed. It shows three distinct and unique segments in drain current-gate voltage transfer characteristics induced by Schottky junctions. In addition, the different stoichiometries of SixNy for a double-layered nitride is utilized as a charge trap layer for boosting the operation speed. This work can bring the industry potentially one step closer to realizing the mass production of hardware-based synaptic devices in the future.

Through-skull brain imaging in vivo at visible wavelengths via dimensionality reduction adaptive-optical microscopy.

Compensation of sample-induced optical aberrations is crucial for visualizing microscopic structures deep within biological tissues. However, strong multiple scattering poses a fundamental limitation for identifying and correcting the tissue-induced aberrations. Here, we introduce a label-free deep-tissue imaging technique termed dimensionality reduction adaptive-optical microscopy (DReAM) to selectively attenuate multiple scattering. We established a theoretical framework in which dimensionality reduction of a time-gated reflection matrix can attenuate uncorrelated multiple scattering while retaining a single-scattering signal with a strong wave correlation, irrespective of sample-induced aberrations. We performed mouse brain imaging in vivo through the intact skull with the probe beam at visible wavelengths. Despite the strong scattering and aberrations, DReAM offered a 17-fold enhancement of single scattering-to-multiple scattering ratio and provided high-contrast images of neural fibers in the brain cortex with the diffraction-limited spatial resolution of 412 nanometers and a 33-fold enhanced Strehl ratio.

Triboelectric Nanogenerator: Structure, Mechanism, and Applications.

With the rapid development of the Internet of Things (IoT), the number of sensors utilized for the IoT is expected to exceed 200 billion by 2025. Thus, sustainable energy supplies without the recharging and replacement of the charge storage device have become increasingly important. Among various energy harvesters, the triboelectric nanogenerator (TENG) has attracted considerable attention due to its high instantaneous output power, broad selection of available materials, eco-friendly and inexpensive fabrication process, and various working modes customized for target applications. The TENG harvests electrical energy from wasted mechanical energy in the ambient environment. Three types of operational modes based on contact-separation, sliding, and freestanding are reviewed for two different configurations with a double-electrode and a single-electrode structure in the TENGs. Various charge transfer mechanisms to explain the operational principles of TENGs during triboelectrification are also reviewed for electron, ion, and material transfers. Thereafter, diverse methodologies to enhance the output power considering the energy harvesting efficiency and energy transferring efficiency are surveyed. Moreover, approaches involving not only energy harvesting by a TENG but also energy storage by a charge storage device are also reviewed. Finally, a variety of applications with TENGs are introduced. This review can help to advance TENGs for use in self-powered sensors, energy harvesters, and other systems. It can also contribute to assisting with more comprehensive and rational designs of TENGs for various applications.

Label-free neuroimaging in vivo using synchronous angular scanning microscopy with single-scattering accumulation algorithm.

Label-free in vivo imaging is crucial for elucidating the underlying mechanisms of many important biological systems in their most native states. However, the applicability of existing modalities has been limited to either superficial layers or early developmental stages due to tissue turbidity. Here, we report a synchronous angular scanning microscope for the rapid interferometric recording of the time-gated reflection matrix, which is a unique matrix characterizing full light-specimen interaction. By applying single scattering accumulation algorithm to the recorded matrix, we removed both high-order sample-induced aberrations and multiple scattering noise with the effective aberration correction speed of 10,000 modes/s. We demonstrated in vivo imaging of whole neural network throughout the hindbrain of the larval zebrafish at a matured stage where physical dissection used to be required for conventional imaging. Our method will expand the scope of applications for optical imaging, where fully non-invasive interrogation of living specimens is critical.

Selective Equatorial Sclera Crosslinking in the Orbit Using a Metal-Coated Polymer Waveguide.

Purpose: Photochemical crosslinking of the sclera is an emerging technique that may prevent excessive eye elongation in pathologic myopia by stiffening the scleral tissue. To overcome the challenge of uniform light delivery in an anatomically restricted space, we previously introduced the use of flexible polymer waveguides. We presently demonstrate advanced waveguides that are optimized to deliver light selectively to equatorial sclera in the intact orbit. Methods: Our waveguides consist of a polydimethylsiloxane cladding and a polyurethane core, coupled to an optical fiber. A reflective silver coating deposited on the top and side surfaces of the waveguide prevents light leakage to nontarget, periorbital tissue. Postmortem rabbits were used to test the feasibility of in situ equatorial sclera crosslinking. Tensometry measurements were performed on ex vivo rabbit eyes to confirm a biomechanical stiffening effect. Results: Metal-coated waveguides enabled efficient light delivery to the entire circumference of the equatorial sclera with minimal light leakage to the periorbital tissues. Blue light was delivered to the intact orbit with a coefficient of variation in intensity of 22%, resulting in a 45 ± 11% bleaching of riboflavin fluorescence. A 2-fold increase in the Young's modulus at 5% strain (increase of 92% P < 0.05, at 25 J/cm2) was achieved for ex vivo crosslinked eyes. Conclusions: Flexible polymer waveguides with reflective, biocompatible surfaces are useful for sclera crosslinking to achieve targeted light delivery. We anticipate that our demonstrated procedure will be applicable to sclera crosslinking in live animal models and, potentially, humans in vivo.

Microsphere-based interferometric optical probe.

Fluorescent optical probes have rapidly transformed our understanding of complex biological systems by providing specific information on biological targets in the natural living state. However, their utility is often limited by insufficient brightness, photostability, and multiplexing capacity. Here, we report a conceptually new optical probe, termed 'reflectophore', which is based on the spectral interference from a dielectric microsphere. Reflectophores are orders-of-magnitudes brighter than conventional fluorophores and are free from photobleaching, enabling practically unlimited readout at high fidelity. They also offer high-degree multiplexing, encoded in their optical size, which can be readily decoded through interferometric detection with nanoscale accuracy, even in turbid biological media. Furthermore, we showcase their biological applications in cellular barcoding and microenvironmental sensing of a target protein and local electric field.

High-resolution adaptive optical imaging within thick scattering media using closed-loop accumulation of single scattering.

Thick biological tissues give rise to not only the multiple scattering of incoming light waves, but also the aberrations of remaining signal waves. The challenge for existing optical microscopy methods to overcome both problems simultaneously has limited sub-micron spatial resolution imaging to shallow depths. Here we present an optical coherence imaging method that can identify aberrations of waves incident to and reflected from the samples separately, and eliminate such aberrations even in the presence of multiple light scattering. The proposed method records the time-gated complex-field maps of backscattered waves over various illumination channels, and performs a closed-loop optimization of signal waves for both forward and phase-conjugation processes. We demonstrated the enhancement of the Strehl ratio by more than 500 times, an order of magnitude or more improvement over conventional adaptive optics, and achieved a spatial resolution of 600 nm up to an imaging depth of seven scattering mean free paths.

Label-free nanoscale optical metrology on myelinated axons in vivo.

In the mammalian nervous system, myelin provides electrical insulation for the neural circuit by forming a highly organized, multilayered thin film around the axon fibers. Here, we investigate the spectral reflectance from this subcellular nanostructure and devise a new label-free technique based on a spectroscopic analysis of reflected light, enabling nanoscale imaging of myelinated axons in their natural living state. Using this technique, we demonstrate three-dimensional mapping of the axon diameter and sensing of dynamic changes in the substructure of myelin at nanoscale. We further reveal the prevalence of axon bulging in the brain cortex in vivo after mild compressive trauma. Our novel tool opens new avenues of investigation by creating unprecedented access to the nanostructural dynamics of live myelinated axons in health and disease.

Flexible Optical Waveguides for Uniform Periscleral Cross-Linking.

Purpose: Scleral cross-linking (SXL) with a photosensitizer and light is a potential strategy to mechanically reinforce the sclera and prevent progressive axial elongation responsible for severe myopia. Current approaches for light delivery to the sclera are cumbersome, do not provide uniform illumination, and only treat a limited area of sclera. To overcome these challenges, we developed flexible optical waveguides optimized for efficient, homogeneous light delivery. Methods: Waveguides were fabricated from polydimethylsiloxane elastomer. Blue light (445 nm) is coupled into the waveguide with an input fiber. Light delivery efficiency from the waveguide to scleral tissue was measured and fit to a theoretical model. SXL was performed on fresh porcine eyes stained with 0.5% riboflavin, using irradiances of 0, 25, and 50 mW/cm2 around the entire equator of the eye. Stiffness of scleral strips was characterized with tensiometry. Results: Light delivery with a waveguide of tapered thickness (1.4-0.5 mm) enhanced the uniformity of light delivery, compared to a flat waveguide, achieving a coefficient of variation of less than 10%. At 8% strain, sclera cross-linked with the waveguides at 50 mW/cm2 for 30 minutes had a Young's modulus of 10.7 ± 1.0 MPa, compared to 5.9 ± 0.5 MPa for no irradiation, with no difference in stiffness between proximally and distally treated halves. The stiffness of waveguide-irradiated samples did not differ from direct irradiation at the same irradiance. Conclusions: We developed flexible waveguides for periscleral cross-linking. We demonstrated efficient and uniform stiffening of a 5-mm-wide equatorial band of scleral tissue.

Optical lens-microneedle array for percutaneous light delivery.

The limited penetration depth of light in skin tissues is a practical bottleneck in dermatologic applications of light-induced therapies, including anti-microbial blue light therapy and photodynamic skin cancer therapy. Here, we demonstrate a novel device, termed optical microneedle array (OMNA), for percutaneous light delivery. A prototype device with a 11 by 11 array of needles at a spacing of 1 mm and a length of 1.6 mm was fabricated by press-molding poly-(lactic acid) (PLA) polymers. The device also incorporates a matched microlens array that focuses the light through the needle tips at specific points to achieve an optimal intensity profile in the tissue. In experiments done with bovine tissues, the OMNA enabled us to deliver a total of 7.5% of the input photons at a wavelength of 491 nm, compared to only 0.85% without the device. This 9-fold enhancement of light delivery was close to the prediction of 10.8 dB by ray-tracing simulation and is expected to increase the effective treatment depth of anti-microbial blue light therapy significantly from 1.3 to 2.5 mm in human skin.

Shear Brillouin light scattering microscope.

Brillouin spectroscopy has been used to characterize shear acoustic phonons in materials. However, conventional instruments had slow acquisition times over 10 min per 1 mW of input optical power, and they required two objective lenses to form a 90° scattering geometry necessary for polarization coupling by shear phonons. Here, we demonstrate a confocal Brillouin microscope capable of detecting both shear and longitudinal phonons with improved speeds and with a single objective lens. Brillouin scattering spectra were measured from polycarbonate, fused quartz, and borosilicate in 1-10 s at an optical power level of 10 mW. The elastic constants, phonon mean free path and the ratio of the Pockels coefficients were determined at microscopic resolution.

Selective two-photon collagen crosslinking in situ measured by Brillouin microscopy.

Two-photon polymerization has enabled precise microfabrication of three-dimensional structures with applications spanning from photonic microdevices, drug delivery systems, and cellular scaffolds. We present two-photon collagen crosslinking (2P-CXL) of intact corneal tissue using riboflavin and femtosecond laser irradiation. Collagen fiber orientations and photobleaching were characterized by second harmonic generation and two-photon fluorescence imaging, respectively. Measurement of local changes in longitudinal mechanical moduli with confocal Brillouin microscopy enabled the visualization of the cross-linked pattern without perturbation of the surrounding non-irradiated regions. 2P-CXL induced stiffening was comparable to that achieved with conventional one-photon CXL. Our results demonstrate the ability to selectively stiffen biological tissue in situ at high resolution with broad implications in ophthalmology, laser surgery, and tissue engineering.

Transmission matrix of a scattering medium and its applications in biophotonics.

A conventional lens has well-defined transfer function with which we can form an image of a target object. On the contrary, scattering media such as biological tissues, multimode optical fibers and layers of disordered nanoparticles have highly complex transfer function, which makes them impractical for the general imaging purpose. In recent studies, we presented a method of experimentally recording the transmission matrix of such media, which is a measure of the transfer function. In this review paper, we introduce two major applications of the transmission matrix: enhancing light energy delivery and imaging through scattering media. For the former, we identified the eigenchannels of the transmission matrix with large eigenvalues and then coupled light to those channels in order to enhance light energy delivery through the media. For the latter, we solved matrix inversion problem to reconstruct an object image from the distorted image by the scattering media. We showed the enlargement of the numerical aperture of imaging systems with the use of scattering media and demonstrated endoscopic imaging through a single multimode optical fiber working in both reflectance and fluorescence modes. Our approach will pave the way of using scattering media as unique optical elements for various biophotonics applications.

Exploring anti-reflection modes in disordered media.

Sensing and manipulating targets hidden under scattering media are universal problems that take place in applications ranging from deep-tissue optical imaging to laser surgery. A major issue in these applications is the shallow light penetration caused by multiple scattering that reflects most of incident light. Although advances have been made to eliminate image distortion by a scattering medium, dealing with the light reflection has remained unchallenged. Here we present a method to minimize reflected intensity by finding and coupling light into the anti-reflection modes of a scattering medium. In doing so, we achieved more than a factor of 3 increase in light penetration. Our method of controlling reflected waves makes it readily applicable to in vivo applications in which detector sensors can only be positioned at the same side of illumination and will therefore lay the foundation of advancing the working depth of many existing optical imaging and treatment technologies.

Preferential coupling of an incident wave to reflection eigenchannels of disordered media.

Light waves incident to a highly scattering medium are incapable of penetrating deep into the medium due to the multiple scattering process. This poses a fundamental limitation to optically imaging, sensing, and manipulating targets embedded in opaque scattering layers such as biological tissues. One strategy for mitigating the shallow wave penetration is to exploit eigenchannels with anomalously high transmittance existing in any scattering medium. However, finding such eigenchannels has been a challenging task due to the complexity of disordered media. Moreover, it is even more difficult to identify those eigenchannels from the practically relevant reflection geometry of measurements. In this Letter, we present an iterative wavefront control method that either minimizes or maximizes the total intensity of the reflected waves. We proved that this process led to the preferential coupling of incident wave to either low or high-reflection eigenchannels, and observed either enhanced or reduced wave transmission as a consequence. Since our approach is free from prior characterization measurements such as the recording of transmission matrix, and also able to keep up with sample perturbation, it is readily applicable to in vivo applications. Enhancing light penetration will help improving the working depth of optical sensing and treatment techniques.