Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
RSC Adv ; 9(36): 20865-20870, 2019 Jul 01.
Artículo en Inglés | MEDLINE | ID: mdl-35515555

RESUMEN

We investigated the effects of X-ray irradiation on the electrical characteristics of an amorphous In-Ga-Zn-O (a-IGZO) thin film transistor (TFT). The a-IGZO TFT showed a negative threshold voltage (V TH) shift of -6.2 V after 100 Gy X-ray irradiation. Based on spectroscopic ellipsometry (SE) and X-ray photoelectron spectroscopy (XPS) analysis, we found that the Fermi energy (E F) changes from 2.73 eV to 3.01 eV and that the sub-gap state of D1 and D2 changes near the conduction band minimum (CBM) of the a-IGZO film after X-ray irradiation. These results imply that the negative V TH shift after X-ray irradiation is related to the increase in electron concentration of the a-IGZO TFT active layer. We confirmed that the sources for electron generation during X-ray irradiation are hydrogen incorporation from the adjacent layer or from ambient air to the active layer in the TFT, and the oxygen vacancy dependent persistent photocurrent (PPC) effect. Since both causes are reversible processes involving an activation energy, we demonstrate the V TH shift recovery by thermal annealing.

2.
ACS Nano ; 9(10): 9964-73, 2015 Oct 27.
Artículo en Inglés | MEDLINE | ID: mdl-26418767

RESUMEN

The photochemical tunability of the charge-transport mechanism in metal-oxide semiconductors is of great interest since it may offer a facile but effective semiconductor-to-metal transition, which results from photochemically modified electronic structures for various oxide-based device applications. This might provide a feasible hydrogen (H)-radical doping to realize the effectively H-doped metal oxides, which has not been achieved by thermal and ion-implantation technique in a reliable and controllable way. In this study, we report a photochemical conversion of InGaZnO (IGZO) semiconductor to a transparent conductor via hydrogen doping to the local nanocrystallites formed at the IGZO/glass interface at room temperature. In contrast to thermal or ionic hydrogen doping, ultraviolet exposure of the IGZO surface promotes a photochemical reaction with H radical incorporation to surface metal-OH layer formation and bulk H-doping which acts as a tunable and stable highly doped n-type doping channel and turns IGZO to a transparent conductor. This results in the total conversion of carrier conduction property to the level of metallic conduction with sheet resistance of ∼16 Ω/□, room temperature Hall mobility of 11.8 cm(2) V(-1) sec(-1), the carrier concentration at ∼10(20) cm(-3) without any loss of optical transparency. We demonstrated successful applications of photochemically highly n-doped metal oxide via optical dose control to transparent conductor with excellent chemical and optical doping stability.

3.
Nanoscale Res Lett ; 9(1): 619, 2014.
Artículo en Inglés | MEDLINE | ID: mdl-25435832

RESUMEN

In this study, InGaZnO (IGZO) thin film transistors (TFTs) with a dual active layer (DAL) structure are fabricated by inserting a homogeneous embedded conductive layer (HECL) in an amorphous IGZO (a-IGZO) channel with the aim of enhancing the electrical characteristics of conventional bottom-gate-structure TFTs. A highly conductive HECL (carrier concentration at 1.6 × 10(13) cm(-2), resistivity at 4.6 × 10(-3) Ω∙cm, and Hall mobility at 14.6 cm(2)/Vs at room temperature) is fabricated using photochemical H-doping by irradiating UV light on an a-IGZO film. The electrical properties of the fabricated DAL TFTs are evaluated by varying the HECL length. The results reveal that carrier mobility increased proportionally with the HECL length. Further, a DAL TFT with a 60-µm-long HECL embedded in an 80-µm-long channel exhibits comprehensive and outstanding improvements in its electrical properties: a saturation mobility of 60.2 cm(2)/Vs, threshold voltage of 2.7 V, and subthreshold slope of 0.25 V/decade against the initial values of 19.9 cm(2)/Vs, 4.7 V, and 0.45 V/decade, respectively, for a TFT without HECL. This result confirms that the photochemically H-doped HECL significantly improves the electrical properties of DAL IGZO TFTs.

4.
Appl Microbiol Biotechnol ; 97(8): 3643-51, 2013 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-23504075

RESUMEN

The aim of the present study was to develop a noble and specific marker for a quantitative polymerase chain reaction (PCR) assay for the species-specific detection of Pseudomonas aeruginosa based on the O-antigen acetylase gene. It is an important challenge to characterize populations of the bacterium P. aeruginosa, an opportunist by virtue of its physiological and genetic adaptability. However, molecular and serological methods currently available for sensitive and specific detection of P. aeruginosa are by no means satisfactory because there have been critical defects in the diagnosis and identification of P. aeruginosa strains in that these assays also detect other Pseudomonas species, or do not obtain amplified products from P. aeruginosa strains. Therefore, a primer set was designed based on the O-antigen acetylase gene of P. aeruginosa PA01 because it has been known that this gene is structurally diverse among species. The specificity of the primer set was evaluated using genomic DNA from six isolates of P. aeruginosa, 18 different species of Pseudomonas, and 23 other reference pathogenic bacteria. The primer set used in the PCR assay amplified a 232-bp amplicon for only six P. aeruginosa strains. The assay was also able to detect at least 1.41 × 10(3) copies/µl of cloned amplified target DNA using purified DNA, or 2.7 × 10(2) colony-forming unit per reaction when using calibrated cell suspension. In conclusion, this assay can be applied as a practical diagnostic method for epidemiological research and the sanitary management of water with a low level or latent infection of P. aeruginosa.


Asunto(s)
Técnicas Bacteriológicas/métodos , Pseudomonas aeruginosa/aislamiento & purificación , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Acetiltransferasas/genética , Cartilla de ADN/genética , Pseudomonas aeruginosa/enzimología , Pseudomonas aeruginosa/genética , Sensibilidad y Especificidad
5.
Plant Dis ; 96(4): 577-580, 2012 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-30727429

RESUMEN

In this study, we developed a reliable, quick, and accurate quantitative polymerase chain reaction (qPCR) assay to detect grain rot caused by Burkholderia glumae in rice seed. The control of bacterial grain rot is difficult, and the only practical methods for disease management rely on the use of pathogen-free seed, appropriate culture practices, and resistant cultivars. Therefore, the specific detection of this pathogen in seed is essential for effective control of the disease. However, other Burkholderia spp. are also detected by currently available molecular and serological methods. In this study, we exploited the available genome sequence information in public databases to develop specific PCR primers for accurate diagnosis of B. glumae. An SYBR Green real-time PCR primer set was designed based on the rhs family gene (YD repeat protein) of B. glumae BGR1 because these genes are structurally diverse. The specificity of the primers was evaluated using purified DNA from 5 isolates of B. glumae, 6 different species of Burkholderia, and 18 other reference pathogenic bacteria. The assay was able to detect at least one genome equivalent of cloned amplified target DNA using purified DNA or 1 CFU per reaction when using calibrated cell suspension. This method is rapid and reliable and has great potential for analyzing large numbers of samples.

6.
Plant Dis ; 96(2): 253-257, 2012 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-30731799

RESUMEN

The aim of this study was to develop a quantitative polymerase chain reaction (qPCR) assay for specific detection of Pectobacterium wasabiae using a primer pair based on the YD repeat protein gene for amplification of a 140-bp DNA fragment from infected wasabi (Wasabia japonica), a member of the crucifer family. The soft rot caused by P. wasabiae is an emerging disease that is present in many wasabi-producing areas. However, specific and reliable methods for identifying the pathogen are not available. Therefore, a qPCR primer set for accurate diagnosis of P. wasabiae was developed from publically available genome sequences. A SYBR Green qPCR primer set was designed based on a YD repeat protein gene of P. wasabiae WPP163 because it is known that this gene is structurally diverse among species, pathovars, or subspecies. The specificity of the primer set was evaluated using genomic DNA from 5 isolates of P. wasabiae, 5 different species of Pectobacterium, and 16 other pathogenic reference bacteria. The primer set used in the PCR assay successfully amplified a 140-bp amplicon for all five P. wasabiae strains. No amplification was obtained from 29 other pathogenic bacteria. The assay was also able to detect at least two genomic DNA, or 3 CFU per reaction, when using calibrated cell suspension.

7.
Mycobiology ; 38(1): 7-12, 2010 Mar.
Artículo en Inglés | MEDLINE | ID: mdl-23956618

RESUMEN

A green mold species that has not previously been reported in Korea was isolated from oak log beds used for shiitake (Lentinula edodes) cultivation that were infested by mushroom flies. In this study, we identify the mold species as Gliocladium viride (an anamorph of Hypocrea lutea) and describe its mycological properties. The fungus was cottony on both potato dextrose agar (PDA) and Czapek yeast extract agar (CYA), but was colored white on PDA and became yellowish green and brown on CYA. Mycelial growth on PDA attained a diameter of 73 mm at 30℃ after 5 days. The fungus grew faster on malt extract agar (> 80 mm, 5 days at 25℃) compared to CYA and PDA (< 68 mm, 5 days at 25℃). Penicillate conidiophores of the fungus are hyaline, smooth walled, branching above typically in four stages, and 120~240 µm in length. Club-shaped or slender phialides are formed on the metulae. Conidia of the fungus were ovate and elliptic, yellowish brown and green, and 2.5~3.0 µm × 1.8~2.3 µm in size. Typically, slimy conidia are formed in a mass and colored brown to dark green to almost black. The internal transcribed spacer rDNA and translation elongation factor 1 alpha gene sequences of the fungus isolated here show 99% identity with previously identified G. viride strains.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA