Prediction of indoor PM2.5 concentrations and reduction strategies for cooking events through various IAQ management methods in an apartment of South Korea.

Indoor PM2.5 in apartments must be effectively managed to minimize adverse impacts on human health. Cooking is the one of the main PM2.5 sources in apartments, and indoor air quality (IAQ) management methods (natural ventilation, mechanical ventilations, range hoods, and air purifiers) are typically used to reduce PM2.5 generated during cooking. For effective control of indoor PM2.5 , prediction of PM2.5 reduction for various IAQ management methods is necessary. This study carefully predicted indoor PM2.5 concentrations in an apartment when IAQ management methods were applied separately and/or in combination during cooking. The infiltration and exfiltration were verified by comparing the experimental results of CO2 concentration with those predicted with or without mechanical ventilation. The deposition rate for PM2.5 generated by cooking was also derived by comparing the experimental PM2.5 changes with the predicted values for PM2.5 natural decay. Through this method, effective PM2.5 control ways during cooking in apartments can be proposed, such as natural ventilation with a range hood for 30 min and then the operation of an air purifier for 30 min. Additionally, if this prediction is combined with energy consumption, it will be possible to propose the most energy-efficient indoor PM2.5 control methods for various seasons and outdoor conditions.

Efficient Energy Saving Scenarios for Indoor PM2.5 Management in an Apartment of South Korea.

Indoor PM2.5 must be effectively controlled to minimize adverse impacts on public health. Cooking is one of the main sources of PM2.5 in residential areas, and indoor air quality (IAQ) management methods such as natural and mechanical ventilation, range hood, and air purifier are typically used to reduce cooking-generated PM2.5 concentrations. However, studies on the combined effects of various IAQ management methods on indoor PM2.5 reduction and energy consumption are limited. In this study, a theoretical model was established to estimate the performance of various IAQ management methods for controlling indoor PM2.5 concentrations and energy consumption. The model was verified by comparative experiments in which, various IAQ management methods were operated individually or combined. Seasonal energy consumption was calculated through the verified model, and energy consumption saving scenarios were derived for maintaining indoor PM2.5 concentrations less than 10 µg/m3, a World Health Organization annual guideline, under fair and poor outdoor PM2.5 concentrations of 15 and 50 µg/m3, respectively. Based on our results, we found that energy consumption could be reduced significantly by applying natural ventilation in spring, autumn, and summer and mechanical ventilation in winter. Our study identified efficient energy saving PM2.5 management scenarios using various IAQ management methods by predicting indoor PM2.5 concentration and energy consumption according to the annual life patterns of typical residents in South Korea.

Photobiocidal-triboelectric nanolayer coating of photosensitizer/silica-alumina for reusable and visible-light-driven antibacterial/antiviral air filters.

Outbreaks of airborne pathogens pose a major threat to public health. Here we present a single-step nanocoating process to endow commercial face mask filters with photobiocidal activity, triboelectric filtration capability, and washability. These functions were successfully achieved with a composite nanolayer of silica-alumina (Si-Al) sol-gel, crystal violet (CV) photosensitizer, and hydrophobic electronegative molecules of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTES). The transparent Si-Al matrix strongly immobilized the photosensitizer molecules while dispersing them spatially, thus suppressing self-quenching. During nanolayer formation, PFOTES was anisotropically rearranged on the Si-Al matrix, promoting moisture resistance and triboelectric charging of the Si-Al/PFOTES-CV (SAPC)-coated filter. The SAPC nanolayer stabilized the photoexcited state of the photosensitizer and promoted redox reaction. Compared to pure-photosensitizer-coated filters, the SAPC filter showed substantially higher photobiocidal efficiency (∼99.99 % for bacteria and a virus) and photodurability (∼83 % reduction in bactericidal efficiency for the pure-photosensitizer filter but ∼0.34 % for the SAPC filter after 72 h of light irradiation). Moreover, after five washes with detergent, the SAPC filter maintained its photobiocidal and filtration performance, proving its reusability potential. Therefore, this SAPC nanolayer coating provides a practical strategy for manufacturing an antimicrobial and reusable mask filter for use during the ongoing COVID-19 pandemic.

Quartz crystal microbalance with thermally-controlled surface adhesion for an efficient fine dust collection and sensing.

The mass concentration of fine dust or particles acts as a standard measure to express the severity of air pollution. In connection with this, many related sensor technologies have been suggested for both indoor and outdoor uses. Among several technologies, the direct measurement of the dust mass using resonant platforms is the most preferable as it possesses multiple advantages including high sensitivity, low limit of detection, and a rapid response time. Such sensor performances directly rely on the adhesion quality between the sensor substrate and dust. In this work, we introduce a thermally controlled dust capturing scheme by integrating a polystyrene (PS) layer and microheater on quartz crystal microbalance (QCM). The Pt microheater can rapidly heat the sensor up to 100 °C, allowing a controlled switching between the soft and hard conditions of the PS film at a rapid rate. When the film is soft, the sensor can capture dust particle efficiently and we can calibrate the attached particle mass by measuring the resonance response. Compared to a bare QCM, our sensor used in this study exhibits 11 times larger detectable mass range. In addition, heated QCMs show a performance that is comparable to a high-cost particle sensing equipment such as an aerodynamic particle sizer and optical particle counter.

Effects of Air Purifiers on the Spread of Simulated Respiratory Droplet Nuclei and Virus Aggregates.

The present study was performed to quantitatively evaluate the effects of air purifiers on the spread of COVID-19 and to suggest guidelines for their safe use. To simulate respiratory droplet nuclei and nano-sized virus aggregates, deionized water containing 100 nm of polystyrene latex (PSL) particles was sprayed using a vibrating mesh nebulizer, and the changes in the particle number concentration were measured for various locations of the particle source and air purifier in a standard 30 m3 test chamber. The spread of the simulated respiratory droplet nuclei by the air purifier was not significant, but the nano-sized aggregates were significantly affected by the airflow generated by the air purifier. However, due to the removal of the airborne particles by the HEPA filter contained in the air purifier, continuous operation of the air purifier reduced the number concentration of both the simulated respiratory droplet nuclei and nano-sized aggregates in comparison to the experiment without operation of the air purifier. The effect of the airflow generated by the air purifier on the spread of simulated respiratory droplet nuclei and nano-sized aggregates was negligible when the distance between the air purifier and the nebulizer exceeded 1 m.

Enriched Aerosol-to-Hydrosol Transfer for Rapid and Continuous Monitoring of Bioaerosols.

Bioaerosols, including infectious diseases such as COVID-19, are a continuous threat to global public safety. Despite their importance, the development of a practical, real-time means of monitoring bioaerosols has remained elusive. Here, we present a novel, simple, and highly efficient means of obtaining enriched bioaerosol samples. Aerosols are collected into a thin and stable liquid film by the unique interaction of a superhydrophilic surface and a continuous two-phase centrifugal flow. We demonstrate that this method can provide a concentration enhancement ratio of ∼2.4 × 106 with a collection efficiency of ∼99.9% and an aerosol-into-liquid transfer rate of ∼95.9% at 500 nm particle size (smaller than a single bacterium). This transfer is effective in both laboratory and external ambient environments. The system has a low limit of detection of <50 CFU/m3air using a straightforward bioluminescence-based technique and shows significant potential for air monitoring in occupational and public-health applications.

Atomic Layer Deposition of Tin Monosulfide Using Vapor from Liquid Bis(N,N'-diisopropylformamidinato)tin(II) and H2S.

The oxide and sulfide of divalent tin show considerable promise for sustainable thin-film optoelectronics, as transparent conducting and light absorbing p-type layers, respectively. Chemical vapor deposition (CVD) and atomic layer deposition (ALD) provide attractive routes to these layers. The literature on volatile tin(II) compounds used as CVD or ALD precursors shows that new compounds can provide different growth rates, film morphologies, preferred crystallographic orientations, and other material properties. We report here the synthesis and characterization of a new liquid tin(II) precursor, bis(N,N'-diisopropylformamidinato)tin(II) (1), which is effective in ALD of SnS in combination with H2S between 65 and 180 °C. Like other highly reactive tin(II) precursors, the growth per cycle linearly decreases from 0.82 Å/cycle at 65 °C to 0.4 Å/cycle at 180 °C. This is obviously different from the case of previously reported SnS ALD using bis(2,4-pentanedionato)tin(II), Sn(acac)2, and H2S; films grow at 0.22-0.24 Å/cycle almost independent of the substrate temperature (125-225 °C, J. Phys. Chem. C 2010, 114, 17597). Quartz crystal microbalance (QCM) experiments for SnS ALD using 1 at 80, 120, and 160 °C were carried out to study the linear decrease of the growth per cycle with increasing substrate temperature. On the basis of these QCM studies, although the mechanism of chemisorption-loss of one ligand or two-can be manipulated by changing the exposure of 1, the purging time, or the temperature, only the temperature changes the growth per cycle. We therefore attribute the decreasing growth per cycle with increasing temperature to a decreasing surface thiol density. Photovoltaic devices prepared from 1-derived SnS have a performance similar to those of the best devices prepared from other precursors, and the device yield and replicability of J-V properties are substantially increased by using 1.

Enhanced skeletal muscle formation on microfluidic spun gelatin methacryloyl (GelMA) fibres using surface patterning and agrin treatment.

Bioengineered functional muscle tissues are beneficial for regenerative medicine due to their treatment potential for various debilitating disorders, including myopathy and traumatic injuries. However, the contractile properties of engineered muscle constructs are lacking compared with their native counterparts. Here, we used microfluidic spinning to fabricate photocrosslinkable gelatin methacryloyl (GelMA) hydrogel fibres with well-defined surface morphologies for engineering muscle tissues. We examined whether the combination of topographical cues from surface micropatterning and biochemical stimulation with recombinant agrin can improve the generation of bioengineered muscle tissue. Topographical cues on micropatterned fibres promoted alignment of C2C12 myoblasts and augmented myotube formation during differentiation, as assessed by increased myotube length, aspect ratio, and the elevated mRNA expression of myogenic genes. Moreover, agrin treatment significantly increased acetylcholine receptor expression/clustering and myotube formation and upregulated dystrophin expression in differentiated C2C12 myotubes. Interestingly, the combination of topographical cues with agrin treatment further enhanced myotube maturation and functionality as shown by improved contractility under electrical stimulation. Thus, combining topographical cues and agrin treatment improved functions of engineered muscle tissue, which has potential in biorobotics, drug screening, tissue engineering, and regenerative medicine.

Obtaining a Low and Wide Atomic Layer Deposition Window (150-275 °C) for In2 O3 Films Using an InIII Amidinate and H2 O.

Indium oxide is a major component of many technologically important thin films, most notably the transparent conductor indium tin oxide (ITO). Despite being pyrophoric, homoleptic indium(III) alkyls do not allow atomic layer deposition (ALD) of In2 O3 using water as a co-precursor at substrate temperatures below 200 °C. Several alternative indium sources have been developed, but none allows ALD at lower temperatures except in the presence of oxidants such as O2 or O3 , which are not compatible with some substrates or alloying processes. We have synthesized a new indium precursor, tris(N,N'-diisopropylformamidinato)indium(III), compound 1, which allows ALD of pure, carbon-free In2 O3 films using H2 O as the only co-reactant, on substrates in the temperature range 150-275 °C. In contrast, replacing just the H of the anionic iPrNC(H)NiPr ligand with a methyl group (affording the known tris(N,N'-diisopropylacetamidinato)indium(III), compound 2) results in a considerably higher and narrower ALD window in the analogous reaction with H2 O (225-300 °C). Kinetic studies demonstrate that a higher rate of surface reactions in both parts of the ALD cycle gives rise to this difference in the ALD windows.

Gelatin-Polyaniline Composite Nanofibers Enhanced Excitation-Contraction Coupling System Maturation in Myotubes.

In this study, composite gelatin-polyaniline (PANI) nanofibers doped with camphorsulfonic acid (CSA) were fabricated by electrospinning and used as substrates to culture C2C12 myoblast cells. We observed enhanced myotube formation on composite gelatin-PANI nanofibers compared to gelatin nanofibers, concomitantly with enhanced myotube maturation. Thus, in myotubes, intracellular organization, colocalization of the dihydropyridine receptor (DHPR) and ryanodine receptor (RyR), expression of genes correlated to the excitation-contraction (E-C) coupling apparatus, calcium transients, and myotube contractibility were increased. Such composite material scaffolds combining topographical and electrically conductive cues may be useful to direct skeletal muscle cell organization and to improve cellular maturation, functionality, and tissue formation.

Experimental investigations on characteristics of stable water electrospray in air without discharge.

An experimental study was conducted to resolve previous conflicting results on water electrospray in air at atmospheric pressure. Using a small flow rate relative to that used in previous studies and a small nonmetallic nozzle, we observed stable electrospray of water in air without discharge and distinguished three distinct operating regimes for applied voltage and flow rate. The well-known cone-jet mode was observed and the general scaling law of the generated droplet size in the cone-jet mode was confirmed by direct visualization of the meniscus, jet, and generated droplets. We also observed and analyzed whipping motion in the electrified water jet.

Epitaxial Growth of MgxCa1-xO on GaN by Atomic Layer Deposition.

We demonstrate for the first time that a single-crystalline epitaxial MgxCa1-xO film can be deposited on gallium nitride (GaN) by atomic layer deposition (ALD). By adjusting the ratio between the amounts of Mg and Ca in the film, a lattice matched MgxCa1-xO/GaN(0001) interface can be achieved with low interfacial defect density. High-resolution X-ray diffraction (XRD) shows that the lattice parameter of this ternary oxide nearly obeys Vegard's law. An atomically sharp interface from cross-sectional transmission electron microscopy (TEM) confirmed the high quality of the epitaxy. High-temperature capacitance-voltage characterization showed that the film with composition Mg0.25Ca0.75O has the lowest interfacial defect density. With this optimal oxide composition, a Mg0.25Ca0.75O/AlGaN/GaN metal-oxide-semiconductor high-electron-mobility (MOS-HEMT) device was fabricated. An ultrahigh on/off ratio of 1012 and a near ideal SS of 62 mV/dec were achieved with this device.

Synthesis of Calcium(II) Amidinate Precursors for Atomic Layer Deposition through a Redox Reaction between Calcium and Amidines.

We have prepared two new Ca(II) amidinates, which comprise a new class of ALD precursors. The syntheses proceed by a direct reaction between Ca metal and the amidine ligands in the presence of ammonia. Bis(N,N'-diisopropylformamidinato)calcium(II) (1) and bis(N,N'-diisopropylacetamidinato)calcium(II) (2) adopt dimeric structures in solution and in the solid state. X-ray crystallography revealed asymmetry in one of the bridging ligands to afford the structure [(η(2) -L)Ca(µ-η(2) :η(2) -L)(µ-η(2) :η(1) -L)Ca(η(2) -L)]. These amidinate complexes showed unprecedentedly high volatility as compared to the widely employed and commercially available Ca(II) precursor, [Ca3 (tmhd)6 ]. In CaS ALD with 1 and H2 S, the ALD window was approximately two times wider and lower in temperature by about 150 °C than previously reported with [Ca3 (tmhd)6 ] and H2 S. Complexes 1 and 2, with their excellent volatility and thermal stability (up to at least 350 °C), are the first homoleptic Ca(II) amidinates suitable for use as ALD precursors.

Dynamic manipulation of particles via transformative optofluidic waveguides.

Optofluidics is one of the most remarkable areas in the field of microfluidic research. Particle manipulation with optofluidic platforms has become central to optical chromatography, biotechnology, and µ-total analysis systems. Optical manipulation of particles depends on their sizes and refractive indices (n), which occasionally leads to undesirable separation consequences when their optical mobilities are identical. Here, we demonstrate rapid and dynamic particle manipulation according to n, regardless of size. Integrated liquid-core/solid-cladding (LS) and liquid-core/liquid-cladding (L(2)) waveguides were fabricated and their characteristics were experimentally and theoretically determined. The high and low n particles showed the opposite behaviors by controlling the contrast of their n values to those of the working fluids. The LS waveguide was found to successfully manipulate particles according to n, and the L(2) waveguide was found to provide additional system stability and flexibility, compared to the LS system.

Alkaline quinone flow battery.

Storage of photovoltaic and wind electricity in batteries could solve the mismatch problem between the intermittent supply of these renewable resources and variable demand. Flow batteries permit more economical long-duration discharge than solid-electrode batteries by using liquid electrolytes stored outside of the battery. We report an alkaline flow battery based on redox-active organic molecules that are composed entirely of Earth-abundant elements and are nontoxic, nonflammable, and safe for use in residential and commercial environments. The battery operates efficiently with high power density near room temperature. These results demonstrate the stability and performance of redox-active organic molecules in alkaline flow batteries, potentially enabling cost-effective stationary storage of renewable energy.

Layer-by-layer assembly of 3D tissue constructs with functionalized graphene.

Carbon-based nanomaterials have been considered as promising candidates to mimic certain structure and function of native extracellular matrix materials for tissue engineering. Significant progress has been made in fabricating carbon nanoparticle-incorporated cell culture substrates, but limited studies have been reported on the development of three-dimensional (3D) tissue constructs using these nanomaterials. Here, we present a novel approach to engineer 3D multi-layered constructs using layer-by-layer (LbL) assembly of cells separated with self-assembled graphene oxide (GO)-based thin films. The GO-based structures are shown to serve as cell adhesive sheets that effectively facilitate the formation of multi-layer cell constructs with interlayer connectivity. By controlling the amount of GO deposited in forming the thin films, the thickness of the multi-layer tissue constructs could be tuned with high cell viability. Specifically, this approach could be useful for creating dense and tightly connected cardiac tissues through the co-culture of cardiomyocytes and other cell types. In this work, we demonstrated the fabrication of stand-alone multi-layer cardiac tissues with strong spontaneous beating behavior and programmable pumping properties. Therefore, this LbL-based cell construct fabrication approach, utilizing GO thin films formed directly on cell surfaces, has great potential in engineering 3D tissue structures with improved organization, electrophysiological function, and mechanical integrity.

Siphon-driven microfluidic passive pump with a yarn flow resistance controller.

Precise control of media delivery to cells in microfluidic systems in a simple and efficient manner is a challenge for a number of cell-based applications. Conventional syringe pumps can deliver culture media into microfluidic devices at precisely controlled flow rates, but they are bulky and require a power source. On the other hand, passive microflow-generating systems cannot maintain continuous, controllable and long-term delivery of media. We have developed an on-chip microflow control technology that combines flow rate control and passive, long-term delivery of media to microwell tissue culture chambers. Here, a passive flow is initiated using the siphon effect and a yarn flow resistor is used to regulate the flow rate in the microchannel. Using the yarn flow resistor, the medium flow rate into the microfluidic cell culture system is made adjustable to a few hundred microliters per hour. To evaluate the effects of controlled flow on microfluidic cell culture properties (feasibility test), we measured the cell alignment and cytoskeletal arrangement of endothelial cells cultured in a microwell array inside the microfluidic channel.

Myotube formation on gelatin nanofibers - multi-walled carbon nanotubes hybrid scaffolds.

Engineering functional muscle tissue requires the formation of densely packed, aligned, and mature myotubes. To enhance the formation of aligned myotubes with improved contractibility, we fabricated aligned electrospun gelatin multi-walled carbon nanotubes (MWNTs) hybrid fibers that were used as scaffolds for the growth of myoblasts (C2C12). The MWNTs significantly enhanced myotube formation by improving the mechanical properties of the resulting fibers and upregulated the activation of mechanotransduction related genes. In addition, the fibers enhanced the maturation of the myotubes and the amplitude of the myotube contractions under electrical stimulation (ES). Such hybrid material scaffolds may be useful to direct skeletal muscle cellular organization, improve cellular functionality and tissue formation.

An optical multi-sensing system for detection of cardiovascular toxicity.

A mini-microscope-based system for multisite detection of cardiovascular toxicity was developed. The mini-microscope consisted of an image sensor and lens module extracted from an inexpensive webcam. The flipped lens module enabled cells to be magnified and monitored during testing. The portability and compactness of this system enables short-term and potential long-term experimentation inside a conventional incubator. The toxicity test results demonstrated that the normalized beating rates of cardiac muscle cells selected from multiple regions increased over time when treated with 100 nM isoprenaline. The presented system could be a promising cost-effective cell-based testing tool for discovering and screening drugs.

Multifunctionality of organometallic quinonoid metal complexes: surface chemistry, coordination polymers, and catalysts.

Quinonoid metal complexes have potential applications in surface chemistry, coordination polymers, and catalysts. Although quinonoid manganese tricarbonyl complexes have been used as secondary building units (SBUs) in the formation of novel metal-organometallic coordination networks and polymers, the potentially wider applications of these versatile linkers have not yet been recognized. In this Account, we focus on these diverse new applications of quinonoid metal complexes, and report on the variety of quinonoid metal complexes that we have synthesized. Through the use of [(η(6)-hydroquinone)Mn(CO)3](+), we are able to modify the surface of Fe3O4 and FePt nanoparticles (NPs). This process occurs either by the replacement of oleylamine with neutral [(η(5)-semiquinone)Mn(CO)3] at the NP surface, or by the binding of anionic [(η(4)-quinone)Mn(CO)3](-) upon further deprotonation of [(η(5)-semiquinone)Mn(CO)3] at the NP surface. We have demonstrated chemistry at the intersection of surface-modified NPs and coordination polymers through the growth of organometallic coordination polymers onto the surface modified Fe3O4 NPs. The resulting magnetic NP/organometallic coordination polymer hybrid material exhibited both the unique superparamagnetic behavior associated with Fe3O4 NPs and the paramagnetism attributable to the metal nodes, depending upon the magnetic range examined. By the use of functionalized [(η(5)-semiquinone)Mn(CO)3] complexes, we attained the formation of an organometallic monolayer on the surface of highly ordered pyrolitic graphite (HOPG). The resulting organometallic monolayer was not simply a random array of manganese atoms on the surface, but rather consisted of an alternating "up and down" spatial arrangement of Mn atoms extending from the HOPG surface due to hydrogen bonding of the quinonoid complexes. We also showed that the topology of metal atoms on the surface could be controlled through the use of quinonoid metal complexes. A quinonoid rhodium complex showed catalytic activity in Suzuki-Miyaura type reaction. As a result of the excellent stability of the homogeneous catalyst [(quinone)Rh(COD)](-) in water, we also successfully demonstrated catalyst recycling in 1,2- and 1,4-addition reactions. The compound [(quinone)Ir(COD)](-) showed significantly poorer catalytic activity in 1,4-addition reactions. Following upon the excellent coordination ability of the quinonoid rhodium complexes to metal centers, we synthesized organometallic coordination polymer nanocatalysts and silica gel-supported quinonoid rhodium catalysts, the latter using a surface sol-gel technique. The resulting heterogeneous catalysts showed activity in the stereospecific polymerization of phenylacetylene.