RESUMEN
Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.
Asunto(s)
Restauración y Remediación Ambiental , Microplásticos , Nanoestructuras , Restauración y Remediación Ambiental/métodos , Microplásticos/química , Nanoestructuras/química , Contaminantes Químicos del Agua/química , Plásticos/químicaRESUMEN
Water electrolysis is among the recent alternatives for generating clean fuels (hydrogen). It is an efficient way to produce pure hydrogen at a rapid pace with no unwanted by-products. Effective and cheap water-splitting electrocatalysts with enhanced activity, specificity, and stability are currently widely studied. In this regard, noble metal-free transition metal-based catalysts are of high interest. Iron sulfide (FeS) is one of the essential electrocatalysts for water splitting because of its unique structural and electrochemical features. This article discusses the significance of FeS and its nanocomposites as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and overall water splitting. FeS and its nanocomposites have been studied also for energy storage in the form of electrode materials in supercapacitors and lithium- (LIBs) and sodium-ion batteries (SIBs). The structural and electrochemical characteristics of FeS and its nanocomposites, as well as the synthesis processes, are discussed in this work. This discussion correlates these features with the requirements for electrocatalysts in overall water splitting and its associated reactions. As a result, this study provides a road map for researchers seeking economically viable, environmentally friendly, and efficient electrochemical materials in the fields of green energy production and storage.
RESUMEN
A wide array of environmental pollutants is often generated and released into the ecosystem from industrial and human activities. Antibiotics, phenolic compounds, hydroquinone, industrial dyes, and Endocrine-Disrupting Chemicals (EDCs) are prevalent pollutants in water matrices. To promote environmental sustainability and minimize the impact of these pollutants, it is essential to eliminate such contaminants. Although there are multiple methods for pollutants removal, many of them are inefficient and environmentally unfriendly. Horseradish peroxidase (HRP) has been widely explored for its ability to oxidize the aforementioned pollutants, both alone and in combination with other peroxidases, and in an immobilized way. Numerous positive attributes make HRP an excellent biocatalyst in the biodegradation of diverse environmentally hazardous pollutants. In the present review, we underlined the major advancements in the HRP for environmental research. Numerous immobilization and combinational studies have been reviewed and summarized to comprehend the degradability, fate, and biotransformation of pollutants. In addition, a possible deployment of emerging computational methodologies for improved catalysis has been highlighted, along with future outlook and concluding remarks.
Asunto(s)
Ecosistema , Contaminantes Ambientales , Humanos , Peroxidasa de Rábano Silvestre , Peroxidasas , Catálisis , AntibacterianosRESUMEN
In this work, lanthanum ferrite nanoparticles were synthesized via a simple co-precipitation method. Two different templates, namely sorbitol and mannitol, were used in this synthesis to tune the optical, structural, morphological, and photocatalytic properties of lanthanum ferrite. The synthesized lanthanum ferrite-sorbitol (LFOCo-So) and lanthanum ferrite-mannitol (LFOCo-Mo) were investigated through Ultraviolet-Visible (UV-Vis), X-ray diffraction (XRD), Fourier Transform Infra-Red (FTIR), Raman, Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX), and photoluminescence (PL) techniques to study the effects of the templates on the tunable properties of lanthanum ferrite nanoparticles. The UV-Vis study revealed a remarkably small bandgap (2.09 eV) of LFOCo-So compared to the LFOCo-Mo having a band gap of 2.46 eV. XRD analysis revealed a single-phased structure of LFOCo-So, whereas LFOCo-Mo showed different phases. The calculated crystallite sizes of LFOCo-So and LFOCo-Mo were 22 nm and 39 nm, respectively. FTIR spectroscopy indicated the characteristics of metal-oxygen vibrations of perovskites in both lanthanum ferrite (LFO) nanoparticles, whereas a slight shifting of Raman scattering modes in LFOCo-Mo in contrast to LFOCo-So showed the octahedral distortion of the perovskite by changing the template. SEM micrographs indicated porous particles of lanthanum ferrite with LFOCo-So being more uniformly distributed, and EDX confirmed the stoichiometric ratios of the lanthanum, iron, and oxygen in the fabricated lanthanum ferrite. The high-intensity green emission in the photoluminescence spectrum of LFOCo-So indicated more prominent oxygen vacancies than LFOCo-Mo. The photocatalytic efficiency of synthesized LFOCo-So and LFOCo-Mo was investigated against cefadroxil drug under solar light irradiation. At optimized photocatalytic conditions, LFOCo-So showed higher degradation efficiency of 87% in only 20 min than LFOCo-Mo having photocatalytic activity of 81%. The excellent recyclability of the LFOCo-So reflected that it could be reused without affecting photocatalytic efficiency. These findings showed that sorbitol is a useful template for the lanthanum ferrite particles imparting outstanding features, enabling it to be used as an efficient photocatalyst for environmental remediation.
Asunto(s)
Lantano , Nanopartículas , Lantano/química , Cefadroxilo , Nanopartículas/químicaRESUMEN
Although rapid industrialization has made life easier for humans, several associated issues are emerging and harming the environment. Wastewater is regarded as one of the key problems of the 21st century due to its massive production every year and requires immediate attention from all stakeholders to protect the environment. Since the introduction of nanotechnology, bismuth-based nanomaterials have been used in variety of applications. Various techniques, such as hydrothermal, solvo-thermal and biosynthesis, have been reported for synthesizing these materials, etc. Among these, biosynthesis is eco-friendly, cost-effective, and less toxic than conventional chemical methods. The prime focuses of this review are to elaborate biosynthesis of bismuth-based nanomaterials via bio-synthetic agents such as plant, bacteria and fungi and their application in wastewater treatment as anti-pathogen/photocatalyst for pollutant degradation. Besides this, future perspectives have been presented for the upcoming research in this field, along with concluding remarks.
Asunto(s)
Contaminantes Ambientales , Nanoestructuras , Humanos , Aguas Residuales , Bismuto , Nanotecnología/métodosRESUMEN
Persistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective in removing toxic pollutants from the water environment. The upfront costs of these treatment methods are extremely high, and they require the use of harmful synthetic chemicals. For this reason, the development of new technologies for the treatment and recycling of wastewater is an absolute necessity. Our way of life can be made more sustainable by the synthesis of adsorbents based on biomass, making the process less harmful to the environment. Biopolymers offer a sustainable alternative to synthetic polymers, which are manufactured by joining monomer units through covalent bonding. This review presents a detailed classification of biopolymers such as pectin, alginate, chitosan, lignin, cellulose, chitin, carrageen, certain proteins, and other microbial biomass compounds and composites, with a focus on their sources, methods of synthesis, and prospective applications in wastewater treatment. A concise summary of the extensive body of knowledge on the fate of biopolymers after adsorption is also provided. Finally, consideration is given to open questions about future developments leading to environmentally friendly and economically beneficial applications of biopolymers.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Aguas Residuales , Biopolímeros/química , Celulosa/química , Quitina , Agua , Contaminantes Químicos del Agua/química , AdsorciónRESUMEN
The unplanned anthropogenic activities and raced industrial revolution detrimentally causes serious threat to terrestrial and aquatic life. A high discharge of wastewater from industries using dyes affects living organisms and the environment. This paper presents studies on polycationic selenides (PCS) synthesized by hydrothermal methods for photocatalytic degradation of dyes. The synthesized PCS were confirmed by various characterization techniques such as FTIR, SEM, EDX, UV/Vis, and XRD. The FTIR spectra revealed characteristic band at 843, 548 cm-1, and 417 cm-1 due to the M - Se stretching and intrinsic stretching vibrations, respectively. The optical bandgap of polycationic selenide lies in the visible light region (2.36 eV). The SEM images showed that PCS has a spherical shape with an average crystallite size of 29.23 nm calculated from XRD data using Scherer's equation. The PCS has a point of zero charge (PZC) at pH 7. The efficiency of synthesized PCS photocatalyst was confirmed in terms of its activity towards Eosin (EY) and Crystal violet (CV) dyes mineralization. The photocatalytic degradation for EY and CV dyes at optimum conditions was 99.47% and 99.31% and followed second order reactions kinetics with 1.4314 and 0.551 rate constant, respectively. The polynomial quadratic model is the best-fitted response surface methodology (RSM) model having a maximum desirability factors value and significant terms, with R2 (0.9994) and adj R2 values (1.0).
Asunto(s)
Luz Solar , Purificación del Agua , Aguas Residuales , Colorantes/química , Textiles , CatálisisRESUMEN
Drug attrition rate is the calculation or measure of the clinical efficacy of a candidate drug on a screen platform for a specific period. Determining the attrition rate of a prospective cancer drug is a reliable way of testing the clinical efficacy. A low attrition rate in the last phase of a preclinical trial increases the success of a drug discovery process. It has been reported that the attrition rates of antineoplastic drugs are much higher than for other therapeutic drugs. Among the factors identified for the high attrition rates in antineoplastic drugs are the nature of the screen-based platforms involving human-derived xenografts, extracellular matrix-derived scaffold systems, and the synthetic scaffolds, which all have propensity to proliferate tumor cells at faster rates than in vivo primary tumors. Other factors that affect the high attrition rates are induced scaffold toxicity and the use of assays that are irrelevant, yet affect data processing. These factors contribute to the wide variation in data and systematic errors. As a result, it becomes imperative to filter batch variations and to standardize the data. Importantly, understanding the interplay between the biological milieu and scaffold connections is also crucial. Here the cell viability of MCF-7 (breast cancer cell line) cells exposed to different scaffolds were screened before cisplatin dosing using the calculated p-values. The statistical significance (p-value) of data was calculated using the one-way analysis of variance, with the p-value set as: 0 < p < 0.06. In addition, the half-maximal inhibitory concentration (IC50) of the different scaffolds exposed to MCF-7 cells were calculated with the probit extension model and cumulative distribution (%) of the extension data. The chemotherapeutic dose (cisplatin, 56 mg/m2) reduced the cell viability of MCF-7 cells to 5% within 24 h on the scaffold developed from silica nanoparticles (SNPs) and polyethylene glycol (PEG) formulation (SNP:PEG) mixtures with a ratio of 1:10, respectively.
Asunto(s)
Algoritmos , Antineoplásicos Fitogénicos/farmacología , Neoplasias de la Mama/tratamiento farmacológico , Nanocompuestos/química , Extractos Vegetales/farmacología , Antineoplásicos Fitogénicos/química , Antineoplásicos Fitogénicos/aislamiento & purificación , Neoplasias de la Mama/patología , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Femenino , Humanos , Células MCF-7 , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Relación Estructura-Actividad , Células Tumorales CultivadasRESUMEN
The challenges with scaffold profiling of cell-based assay includes accelerated cancer cell proliferation, induced scaffold toxicity, and identifying irrelevant cancer cell-based assays in batch assessments. This study investigates profiling carcinoma of breast cancer cells of MCF-7 model systems using silica nanoparticles scaffold sourced from synthetic materials and plant extracts. Herein, the engineered tissue scaffolds were used to create temporary structures for cancer cell attachments, differentiation, and subsequently to assess the metabolic activity of the cancer cell colonies. The cell viability of the cancer cells was assessed using the tetrazolium compound (MTS reagent), which was reduced to colored formazan, to indicate metabolically active cancer cells in a proliferating assay. We aimed to develop cancer cell-based scaffolds that not only mimic the neoplastic activity, but that also allowed synergistic interaction with cisplatin for in vitro assay screening.
Asunto(s)
Nanopartículas , Dióxido de Silicio , Andamios del Tejido , Microambiente Tumoral , Proliferación Celular , Supervivencia Celular , Técnica del Anticuerpo Fluorescente , Humanos , Células MCF-7RESUMEN
Nontoxic carbon nanoparticle samples prepared by both bottom-up and top-down approaches do not inhibit Gram-negative bacterial growth, indicating excellent biocompatibilities. However, cell growth inhibitory efficacies increase considerably when the carbon nanoparticles are conjugated with the antibiotic tetracycline. In tetracycline-resistant bacteria, these efficacies can approach tenfold higher activities when compared to tetracycline alone. No structural abnormality such as membrane disruptions is evident in the tested bacterial strains; this is in contrast with other nanocarbon systems such as graphene oxides, carbon nanotubes, and amine-functionalized carbon nanoparticles which do exhibit membrane disruptions. In comparison, the tetracycline-conjugated carbon nanoparticles induce membrane perturbations (but not membrane disruptions), inhibiting bacterial efflux mechanisms. It is proposed that when tetracycline is conjugated to the surface of carbon nanoparticles, it functions to direct the nanoparticles to membrane-associated tetracycline efflux pumps, thereby blocking and subsequently inhibiting their function. The conjugation between biocompatible carbon nanoparticles and subtherapeutic but well-established antibiotic molecules may provide hybrid antibiotic assembly strategies resulting in effective multidrug efflux inhibition for combating antibiotic resistance.
Asunto(s)
Antibacterianos , Farmacorresistencia Bacteriana/efectos de los fármacos , Bacterias Gramnegativas/efectos de los fármacos , Nanotubos de Carbono/química , Tetraciclina , Antibacterianos/química , Antibacterianos/farmacología , Proteínas Bacterianas/metabolismo , Bacterias Gramnegativas/citología , Bacterias Gramnegativas/metabolismo , Proteínas de Transporte de Membrana/metabolismo , Tetraciclina/química , Tetraciclina/farmacologíaRESUMEN
Nanozymes are nanomaterials with intrinsic magnetism and superparamagnetic properties. In the presence of an external magnet, nanozyme particles aggregate and redisperse without a foreign attraction. We evaluated the performances of nanozyme by changing the biosensing platforms and substituting other biological variants for a complete cancer assay detection. We investigated the expression of morphological variants in the transmission of signals using an electrochemical method. The signal responses, including signal enhancement with the nanozyme (Au-Fe2O3), showed a wide capturing range (greater than 80%, from 102 to 105 cells ml-1 in phosphate-buffered saline buffer, pH 7.4). The platform showed a fast response time within a dynamic range of 10-105 cells ml-1 for the investigated T47D cancer cell line. We also obtained higher responses for anti-HER2 (human epidermal receptor 2)/streptavidin interface as the biosensing electrode in the presence of T47D cancer cells. The positive assay produced a sixfold increase in current output compared to the negative target or negative biological variant. We calculated the limit of detection at 0.4 U ml-1, and of quantitation at 4 U ml-1 (units per millilitre). However, blood volume amounts in clinical settings may constrain diagnosis and increase detection limit value significantly.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Neoplasias , Biomarcadores de Tumor , Técnicas Electroquímicas , Compuestos Férricos , Oro , HumanosRESUMEN
We report carbon nanodots that can be utilized as effective color converting phosphors for the production of white light-emitting diodes (LEDs). Blue-excitable and yellow-emitting carbon nanodots, functionalized with 3-(imidazolidin-2-on-1-yl)propylmethyldimethoxysilane (IPMDS)-derived moieties (IS-CDs), are synthesized by a novel one-pot reaction in which the products from the initial reaction occurring between urea and 3-(2-aminoethylamino)propylmethyl-dimethoxysilane (AEPMDS) are further treated with citric acid. Distinctive from the majority of carbon nanodots reported previously, IS-CDs emit at 560 nm, under 460 nm excitation, with a quantum yield of 44%. Preliminary toxicity studies, assessed by the Artemia franciscana nauplii (brine shrimp larvae) bioassay, indicate that IS-CDs are largely nontoxic. Furthermore, the IS-CDs form flexible and transparent films without the need of encapsulating agents, and the solid films retain the optical properties of solvated IS-CDs. These features indicate an immense potential for the IS-CDs as an environmental-friendly, blue-excitable carbon nanodot-based phosphor in solid-state lighting devices.
RESUMEN
Augmenting fluorescence intensity is of vital importance to the development of chemical and biochemical sensing, imaging and miniature light sources. Here we report an unprecedented fluorescence enhancement with a novel architecture of multilayer three-dimensional colloidal photonic crystals self-assembled from polystyrene spheres. The new technique uses a double heterostructure, which comprises a top and a bottom layer with a periodicity overlapping the excitation wavelength (E) of the emitters, and a middle layer with a periodicity matching the fluorescence wavelength (F) and a thickness that supports constructive interference for the excitation wavelength. This E-F-E double heterostructure displays direction-dependent light trapping for both excitation and fluorescence, coupling the modes of photonic crystal with multiple-beam interference. The E-F-E double heterostructure renders an additional 5-fold enhancement to the extraordinary FL amplification of Rhodamine B in monolithic E CPhCs, and 4.3-fold acceleration of emission dynamics. Such a self-assembled double heterostructure CPhCs may find significant applications in illumination, laser, chemical/biochemical sensing, and solar energy harvesting. We further demonstrate the multi-functionality of the E-F-E double heterostructure CPhCs in Hg (II) sensing.