Development and validation of a stability-indicating method, structural elucidation of new degradation products from misoprostol by LC-MS time-of-flight, and an ex vivo study of vaginal permeation.

Misoprostol (MSP) is commonly prescribed in obstetrics and gynecology clinical practice for labor induction, cervical ripening, first-trimester pregnancy termination, and the treatment of postpartum hemorrhage. Furthermore, there is a lack of comprehensive discussion evaluating how different commercially available formulations influence the overall efficacy of MSP, even though reports indicate issues with the quality of these formulations, particularly regarding stability and vaginal absorption processes. This study investigates the stability of MSP under acidic conditions and its in vitro permeation using swine vaginal mucosa. A forced degradation study was conducted using 0.2 M HCl, and a high-efficiency LC method was developed. Three degradation products were identified and characterized using electrospray ionization-high-resolution quadrupole-time-of-flight-MS, with respective m/z values of 391.2508, 405.2705, and 387.2259, respectively. These results suggest that the degradation mechanism involves dehydration of the ß-hydroxy ketone moiety, followed by isomerization to its most resonance-stable form and de-esterification. Finally, the in vitro permeation study revealed that the esterified form of MSP was unable to permeate the mucosa and required prior degradation for any component to be detected in the receptor fluid.

New Formulation-Microporation Combination Approaches to Delivering Ciclopirox across Human Nails.

Topical treatments for onychomycosis are of interest to those seeking to avoid systemic drug interactions and to improve systemic safety. This work aimed to develop aqueous-based, simple, and cost-effective vehicles that provide high solubility for ciclopirox and enable the delivery of an active through channels created by nail microporation. Following solubility tests, aqueous gels and thermogels based on hydroxypropylmethylcellulose and poloxamer 407, respectively, were loaded with 8% and 16% ciclopirox. Their performance was then compared to the marketed lacquer Micolamina® in in vitro release tests with artificial membranes and in in vitro permeation tests with human nail clippings with and without poration. Finally, a microbiological assay compared the best gel formulations and the reference product. Little correlation was observed between the in vitro release and the permeation data, and the drug release was highly membrane-dependent. Ciclopirox nail retention in single-dose, porated nails tests was larger than in daily-dosing, non-porated nail conditions. The series of new gel and thermogel vehicles delivered ciclopirox more effectively than Micolamina® in single-dose, porated nail experiments. The inhibition of Trichophyton rubrum activity was significantly increased with microporated nails when the gel formulations were applied but not with Micolamina®. Overall, the results suggest that the new vehicles could be successfully combined with nail microporation to improve the drug delivery and efficacy of topical antifungal medication while reducing the dosing frequency, facilitating patients' adherence.

Dimethoate absorption: A complementary in vitro and in vivo assessment.

This work attempts to evaluate dermal exposure (DE) of farm workers to dimethoate after 4 h of routine application to a lemon plantation. Dimethoate was measured on the workers' clothes as well as in stratum corneum (SC) and in saliva. In vitro permeation tests (IVPT) were performed through rat, pig and human skin and pig buccal, esophageal and sublingual mucosas. The mean of dimethoate DE was 342.19 ± 487.14 mg/d, the percentage of toxic dose per hour was higher than the other pesticides, and the SC penetration factors ranged between 0.5 and 14.81 and 0.05-53.96 % for back of neck and arms respectively. In the supporting IVPT study, dimethoate absorption through human skin was 14.75 % and the default value in the absence of experimental data for this product is 70%. These results show that in family farming the deficiency of correct clothing during the application of pesticides leaves workers more vulnerable.

Development of the stability-indicating method, structural elucidation of new photodegradation products from terconazole by LC-MS TOF, and in vitro toxicity.

Terconazole (TCZ) was the first triazole antifungal drug launched in the market and has been used in the treatment of vulvovaginal candidiasis. It is also indicated to treat dermatophytosis and fungal ocular infections. However, some of the degradation products from triazole drugs have been reported to be toxic, justifying the need of further investigations about the stability of TCZ. identification of its degradation products and evaluation of their toxicity considering the new possibilities of therapeutic indications. Therefore, in this work a systematic investigation regarding photostability of TCZ was conducted. The active pharmaceutical ingredient (API) and its methanolic solution (100 µg mL-1) were kept into a photostability chamber under a UV light (200 Wh/m2; 1.2 × 106 lux/h) during 5 days and 90 min, respectively. A high-efficiency liquid chromatography method was developed for separation and identification of TCZ and its degradation products. The solid-state API remained stable throughout the test, whereas an extensive degradation was observed when in solution. In this case, four degradation products not yet reported in the literature were identified and characterized by electrospray ionization high-resolution quadrupole time-of-flight mass spectrometry (ESI-QTOF-MS). Two degradation products presented m/z of 498 and the other two of 496 and 464, respectively. The results suggest that the degradation follows a first-order kinetic and involves the loss of chlorine atoms from the 2,4-dichlrophenyl moiety. Finally, TCZ submitted to the same stress condition as the API solution, increased significantly the opacity during the bovine corneal opacity and permeability test method (BCOP) indicating a potential to cause ocular toxicity. Further studies using the pure photolysis degradation products of TCZ characterized in this work are still necessary to confirm this find.

Mupirocin ointments: In vitro x In vivo bioequivalence evaluation

Abstract Bioequivalence (BE) assessment of topical drug products is a long-standing challenge. Agencies such as the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) have published several drafts in recent years suggesting different approaches as alternative to evaluate the BE. A proposed Topical Classification System (TCS) has even been discussed. Given the above, the objective of this research was to use in vitro and in vivo BE approaches to evaluate Brazilian marketed mupirocin (MPC) ointments, previously classified as TCS class The in vitro permeation test (IVPT) was performed by applying formulations to pig skin by Franz cells. The in vivo methodology was dermatopharmacokinetic (DPK). These approaches (in vivo tape stripping and IVPT) demonstrated capability of distinguishing among different formulations, thus making them useful methodologies for BE evaluation.

Levobupivacaine-Loaded Liposome Associated with Thermogel for Prolonged Analgesia.

Pain is a phenomenon present in the majority of the population, affecting, among others, the elderly, overweight people, and especially recently operated patients, analgesia being necessary. In the specific case of relief of postoperative pain, different kinds of anesthetics are being used, among them bupivacaine, a widely used drug which promotes long-lasting analgesic effects. However, cardiotoxicity and neurotoxicity are related to its repetitive use. To overcome these shortcomings, Novabupi® (a racemic mixture) was developed and is marketed as an injectable solution. This formulation contains an enantiomeric excess of the levogyre isomer, which has reduced toxicity effects. Seeking to rationalize its use by extending the duration of effect and reducing the number of applications, the objectives of this work were to develop and evaluate liposomes containing Novabupi (LBPV), followed by incorporation into thermogel. Liposomes were prepared using the lipid hydration method, followed by size reduction using sonication, and the developed formulations were characterized by hydrodynamic diameter, polydispersity index (PDI), surface zeta potential, and encapsulation efficiency. The selected optimal liposomal formulation was successfully incorporated into a thermogel without loss of thermoresponsive properties, being suitable for administration as a subcutaneous injection. In the ex vivo permeation studies with fresh rodent skin, the thermogel with liposomes loaded with 0.5% LBPV (T-gel formulation 3) showed higher permeation rates compared to the starting formulation, thermogel with 0.5% LBPV (T-Gel 1), which will probably translate into better therapeutic benefits for treatment of postoperative analgesia, especially with regard to the number of doses applied.

A proposed eye ex vivo permeation approach to evaluate pesticides: Case dimethoate.

This study aims to propose different ex vivo methodologies for pesticide evaluation when in contact with ocular mucosa. The first ex vivo study was performed using vertical Franz cells with fresh and refrigerated excised bovine corneas. The second evaluated the permeation through the cornea by using fresh, refrigerated and damaged whole bovine eyes. Both experiments were evaluated by applying 50 µl (of 5 mg/ml solution) of an emulsifiable pesticide formulation (Dimetoato 500 EC®). In the first study, dimethoate profiles and permeation fluxes showed no statistical differences (p < .05) between fresh and refrigerated excised corneas, probably due to the excision procedure generating damage to the cornea by altering stromal structure, irrespective of the refrigeration procedure. In relation to the results obtained for developed ex vivo permeation method in whole eyes, there was a statistical difference (p < .05) between experiments performed with fresh eyes and those performed with refrigerated/damaged eyes. Damage generated by both the refrigeration process and exposure to irritant products led to a five-fold reduction in the amount of corneal-permeated pesticide as well as a two-fold increase in retention. Thus, the ex vivo permeation approach with whole eyes seems to be a simple and reproducible method to evaluate pesticides. It is evident that further evaluations need to be performed using other pesticides with distinct physicochemical characteristics.

Pesticide dermal absorption: Case study x in vitro study.

In order to evaluate dermal absorption during typical working conditions in family farming, the amount of dimethoate on clothing and in the stratum corneum (SC) was measured in three rural workers. This was achieved by using cotton patches on the worker's clothes and SC quantification by the tape stripping approach. To mimic the above study, an in vitro approach was performed using Franz cells by applying dimethoate (0.4 and 1.8 µg) direct to pig skin or, on a section of cotton before contact with pig skin. The in vivo case results demonstrated the high levels and variability of agrochemicals to which these farmers are subjected, with the total potential dermal absorption between 0.87-2.85 mg/person/h and the estimated SC penetration factor (PF) between 0-54.0 and 0-28.9 % for the back of the neck and the arms respectively. This probably demonstrates the impact of correct protective clothing. For the in vitro study, the amount of pesticide retained in the SC was 52.63 ±â€¯10.73and 135.15 ±â€¯31.8 ng/cm2 after applying 0.4 and 1.8 µg of pesticide directly on SC, and demonstrated close agreement with the in vivo approach. Further studies performed with this and other pesticides with different characteristics will contribute to the understanding of their transport through the skin.

Biopharmaceutical Assessment and Irritation Potential of Microemulsions and Conventional Systems Containing Oil from Syagrus cearensis for Topical Delivery of Amphotericin B Using Alternative Methods.

The aim of this study was to compare the biopharmaceutical characteristics and irritation potentials of microemulsions (MEs) and conventional systems (CSs) containing oil from Syagrus cearensis for topical delivery of Amphotericin B (AmB). Pseudo-ternary phase diagrams were constructed using a water titration method to develop the MEs, and the CSs were prepared according to the classical technique of phase inversion. In the skin permeation and retention study, dermatomed pig skin without stratum corneum was used as an alternative disturbed skin model. The irritation potential was evaluated using three different methods, chorioallantoic membrane assays (HET-CAM and CAM-TBS), and bovine corneal opacity and permeability (BCOP) test. The optimized formulation (ME1) consisting of 0.1% (w/w) Amphotericin B, 9.1% (w/w) catolé oil, 81% (w/w) Smix (1:1, Tween 20 and Kolliphor EL) possessed droplet size of 31.02 ± 0.9 nm, zeta potential of -23.4 mV, and viscosity 0.63 ± 0.1 Pa.s. ME1 exhibited greater retention of AmB in to skin layers (84.79 ± 2.08 µg cm-2) than all the others formulations. In general, MEs showed higher drug release and retention than CSs and all of the formulations showed greater retentivity than permeability. Only MEs developed using Labrasol/Plurol Oleique (L/PO) as the surfactant and co-surfactant exhibited a moderate irritation potential; all other MEs and CSs were classified as non-irritants or slight irritants. The results indicate that formulations containing oil from S. cearensis are promising alternatives for the delivery of AmB targeting the treatment of cutaneous leishmaniasis.