Two-Color Amplified Spontaneous Emission from Auger-Suppressed Quantum Dots in Liquids.

Colloidal quantum-dot (QD) lasing is normally achieved in close-packed solid-state films, as a high QD volume fraction is required for stimulated emission to outcompete fast Auger decay of optical-gain-active multiexciton states. Here a new type of liquid optical-gain medium is demonstrated, in which compact compositionally-graded QDs (ccg-QDs) that feature strong suppression of Auger decay are liquefied using a small amount of solvent. Transient absorption measurements of ccg-QD liquid suspensions reveal broad-band optical gain spanning a wide spectral range from 560 (green) to 675 nm (red). The gain magnitude is sufficient to realize a two-color amplified spontaneous emission (ASE) at 637 and 594 nm due to the band-edge (1S) and the excited-state (1P) transition, respectively. Importantly, the ASE regime is achieved using quasicontinuous excitation with nanosecond pulses. Furthermore, the ASE is highly stable under prolonged excitation, which stands in contrast to traditional dyes that exhibit strong degradation under identical excitation conditions. These observations point toward a considerable potential of high-density ccg-QD suspensions as liquid, dye-like optical gain media that feature readily achievable spectral tunability and stable operation under intense photoexcitation.

Spin-exchange carrier multiplication in manganese-doped colloidal quantum dots.

Carrier multiplication is a process whereby a kinetic energy of a carrier relaxes via generation of additional electron-hole pairs (excitons). This effect has been extensively studied in the context of advanced photoconversion as it could boost the yield of generated excitons. Carrier multiplication is driven by carrier-carrier interactions that lead to excitation of a valence-band electron to the conduction band. Normally, the rate of phonon-assisted relaxation exceeds that of Coulombic collisions, which limits the carrier multiplication yield. Here we show that this limitation can be overcome by exploiting not 'direct' but 'spin-exchange' Coulomb interactions in manganese-doped core/shell PbSe/CdSe quantum dots. In these structures, carrier multiplication occurs via two spin-exchange steps. First, an exciton generated in the CdSe shell is rapidly transferred to a Mn dopant. Then, the excited Mn ion undergoes spin-flip relaxation via a spin-conserving pathway, which creates two excitons in the PbSe core. Due to the extremely fast, subpicosecond timescales of spin-exchange interactions, the Mn-doped quantum dots exhibit an up-to-threefold enhancement of the multiexciton yield versus the undoped samples, which points towards the considerable potential of spin-exchange carrier multiplication in advanced photoconversion.

Colloidal Semiconductor Nanocrystal Lasers and Laser Diodes.

Lasers and optical amplifiers based on solution-processable materials have been long-desired devices for their compatibility with virtually any substrate, scalability, and ease of integration with on-chip photonics and electronics. These devices have been pursued across a wide range of materials including polymers, small molecules, perovskites, and chemically prepared colloidal semiconductor nanocrystals, also commonly referred to as colloidal quantum dots. The latter materials are especially attractive for implementing optical-gain media as in addition to being compatible with inexpensive and easily scalable chemical techniques, they offer multiple advantages derived from a zero-dimensional character of their electronic states. These include a size-tunable emission wavelength, low optical gain thresholds, and weak sensitivity of lasing characteristics to variations in temperature. Here we review the status of colloidal nanocrystal lasing devices, most recent advances in this field, outstanding challenges, and the ongoing progress toward technological viable devices including colloidal quantum dot laser diodes.

Electrically driven amplified spontaneous emission from colloidal quantum dots.

Colloidal quantum dots (QDs) are attractive materials for realizing solution-processable laser diodes that could benefit from size-controlled emission wavelengths, low optical-gain thresholds and ease of integration with photonic and electronic circuits1-7. However, the implementation of such devices has been hampered by fast Auger recombination of gain-active multicarrier states1,8, poor stability of QD films at high current densities9,10 and the difficulty to obtain net optical gain in a complex device stack wherein a thin electroluminescent QD layer is combined with optically lossy charge-conducting layers11-13. Here we resolve these challenges and achieve amplified spontaneous emission (ASE) from electrically pumped colloidal QDs. The developed devices use compact, continuously graded QDs with suppressed Auger recombination incorporated into a pulsed, high-current-density charge-injection structure supplemented by a low-loss photonic waveguide. These colloidal QD ASE diodes exhibit strong, broadband optical gain and demonstrate bright edge emission with instantaneous power of up to 170 µW.

Optically Excited Lasing in a Cavity-Based, High-Current-Density Quantum Dot Electroluminescent Device.

Laser diodes based on solution-processable materials can benefit numerous technologies including integrated electronics and photonics, telecommunications, and medical diagnostics. An attractive system for implementing these devices is colloidal semiconductor quantum dots (QDs). The progress towards a QD laser diode has been hampered by rapid nonradiative Auger decay of optical-gain-active multicarrier states, fast device degradation at high current densities required for laser action, and unfavorable competition between optical gain and optical losses in a multicomponent device stack. Here we resolve some of these challenges and demonstrate optically excited lasing from fully functional high-current density electroluminescent (EL) devices with an integrated optical resonator. This advance has become possible due to excellent optical gain properties of continuously graded QDs and a refined device architecture, which allows for highly efficient light amplification in a thin, EL-active QD layer.

Two-band optical gain and ultrabright electroluminescence from colloidal quantum dots at 1000 A cm-2.

Colloidal quantum dots (QDs) are attractive materials for the realization of solution-processable laser diodes. Primary challenges towards this objective are fast optical-gain relaxation due to nonradiative Auger recombination and poor stability of colloidal QD solids under high current densities required to obtain optical gain. Here we resolve these challenges and achieve broad-band optical gain spanning the band-edge (1S) and the higher-energy (1P) transitions. This demonstration is enabled by continuously graded QDs with strongly suppressed Auger recombination and a current-focusing device design, combined with short-pulse pumping. Using this approach, we achieve ultra-high current densities (~1000 A cm-2) and brightness (~10 million cd m-2), and demonstrate an unusual two-band electroluminescence regime for which the 1P band is more intense than the 1S feature. This implies the realization of extremely large QD occupancies of up to ~8 excitons per-dot, which corresponds to complete filling of the 1S and 1P electron shells.

Enhanced Emission from Bright Excitons in Asymmetrically Strained Colloidal CdSe/CdxZn1-xSe Quantum Dots.

Colloidal CdSe quantum dots (QDs) designed with a high degree of asymmetric internal strain have recently been shown to host a number of desirable optical properties including subthermal room-temperature line widths, suppressed spectral diffusion, and high photoluminescence (PL) quantum yields. It remains an open question, however, whether they are well-suited for applications requiring emission of identical single photons. Here we measure the low-temperature PL dynamics and the polarization-resolved fluorescence line narrowing spectra from ensembles of these strained QDs. Our spectroscopy reveals the radiative recombination rates of bright and dark excitons, the relaxation rate between the two, and the energy spectra of the quantized acoustic phonons in the QDs that can contribute to relaxation processes. In comparison to conventional colloidal CdSe/ZnS core/shell QDs, we find that in asymmetrically strained CdSe QDs over six times more light is emitted directly by the bright exciton. These results are therefore encouraging for the prospects of chemically synthesized colloidal QDs as emitters of single indistinguishable photons.

Semiconductor quantum dots: Technological progress and future challenges.

In quantum-confined semiconductor nanostructures, electrons exhibit distinctive behavior compared with that in bulk solids. This enables the design of materials with tunable chemical, physical, electrical, and optical properties. Zero-dimensional semiconductor quantum dots (QDs) offer strong light absorption and bright narrowband emission across the visible and infrared wavelengths and have been engineered to exhibit optical gain and lasing. These properties are of interest for imaging, solar energy harvesting, displays, and communications. Here, we offer an overview of advances in the synthesis and understanding of QD nanomaterials, with a focus on colloidal QDs, and discuss their prospects in technologies such as displays and lighting, lasers, sensing, electronics, solar energy conversion, photocatalysis, and quantum information.

Highly versatile near-infrared emitters based on an atomically defined HgS interlayer embedded into a CdSe/CdS quantum dot.

The availability of colloidal quantum dots with highly efficient, fast and 'non-blinking' near-infrared emission would benefit numerous applications, from advanced optical communication and quantum networks to biomedical diagnostics. Here, we report high-quality near-infrared emitters that are based on well known CdSe/CdS heterostructures. By incorporating an HgS interlayer at the quantum dot core/shell interface, we convert normally visible emitters into highly efficient near-infrared fluorophores. Employing thermodynamically controlled sequential deposition of metal and chalcogen ions, we achieve atomic-level precision in defining the thickness of the HgS interlayer (H). This manifests in 'quantized' jumps of the photoluminescence spectrum when H changes in discrete, atomic steps. The synthesized structures show highly efficient photoluminescence, tunable from 700 to 1,370 nm, and fast radiative rates of ~1/60 ns-1. The emission from individual CdSe/HgS/CdS colloidal quantum dots is virtually blinking free and exhibits nearly perfect single-photon purity. In addition, when incorporated into a light-emitting-diode architecture, these quantum dots demonstrate strong electroluminescence with a sub-bandgap turn-on voltage.

Solution-processable integrated CMOS circuits based on colloidal CuInSe2 quantum dots.

The emerging technology of colloidal quantum dot electronics provides an opportunity for combining the advantages of well-understood inorganic semiconductors with the chemical processability of molecular systems. So far, most research on quantum dot electronic devices has focused on materials based on Pb- and Cd chalcogenides. In addition to environmental concerns associated with the presence of toxic metals, these quantum dots are not well suited for applications in CMOS circuits due to difficulties in integrating complementary n- and p-channel transistors in a common quantum dot active layer. Here, we demonstrate that by using heavy-metal-free CuInSe2 quantum dots, we can address the problem of toxicity and simultaneously achieve straightforward integration of complimentary devices to prepare functional CMOS circuits. Specifically, utilizing the same spin-coated layer of CuInSe2 quantum dots, we realize both p- and n-channel transistors and demonstrate well-behaved integrated logic circuits with low switching voltages compatible with standard CMOS electronics.

Exploiting Functional Impurities for Fast and Efficient Incorporation of Manganese into Quantum Dots.

The incorporation of manganese (Mn) ions into Cd(Zn)-chalcogenide QDs activates strong spin-exchange interactions between the magnetic ions and intrinsic QD excitons that have been exploited for color conversion, sunlight harvesting, electron photoemission, and advanced imaging and sensing. The ability to take full advantage of novel functionalities enabled by Mn dopants requires accurate control of doping levels over a wide range of Mn contents. This, however, still represents a considerable challenge. Specific problems include the difficulty in obtaining high Mn contents, considerable broadening of QD size dispersion during the doping procedure, and large batch-to-batch variations in the amount of incorporated Mn. Here, we show that these problems originate from the presence of unreacted cadmium (Cd) complexes whose abundance is linked to uncontrolled impurities participating in the QD synthesis. After identifying these impurities as secondary phosphines, we modify the synthesis by introducing controlled amounts of "functional" secondary phosphine species. This allows us to realize a regime of nearly ideal QD doping when incorporation of magnetic ions occurs solely via addition of Mn-Se units without uncontrolled deposition of Cd-Se species. Using this method, we achieve very high per-dot Mn contents (>30% of all cations) and thereby realize exceptionally strong exciton-Mn exchange coupling with g-factors of ∼600.

Optically pumped colloidal-quantum-dot lasing in LED-like devices with an integrated optical cavity.

Realization of electrically pumped lasing with solution processable materials will have a revolutionary impact on many disciplines including photonics, chemical sensing, and medical diagnostics. Due to readily tunable, size-controlled emission wavelengths, colloidal semiconductor quantum dots (QDs) are attractive materials for attaining this goal. Here we use specially engineered QDs to demonstrate devices that operate as both a light emitting diode (LED) and an optically pumped laser. These structures feature a distributed feedback resonator integrated into a bottom LED electrode. By carefully engineering a refractive-index profile across the device, we are able to obtain good confinement of a waveguided mode within the QD medium, which allows for demonstrating low-threshold lasing even with an ultrathin (about three QD monolayers) active layer. These devices also exhibit strong electroluminescence (EL) under electrical pumping. The conducted studies suggest that the demonstrated dual-function (lasing/EL) structures represent a promising device platform for realizing colloidal QD laser diodes.

Spectroscopic and Magneto-Optical Signatures of Cu1+ and Cu2+ Defects in Copper Indium Sulfide Quantum Dots.

Colloidal quantum dots (QDs) of I-III-VI ternary compounds such as copper indium sulfide (CIS) and copper indium selenide (CISe) have been under intense investigation due to both their unusual photophysical properties and considerable technological utility. These materials feature a toxic-element-free composition, a tunable bandgap that covers near-infrared and visible spectral energies, and a highly efficient photoluminescence (PL) whose spectrum is located in the reabsorption-free intragap region. These properties make them attractive for light-emission and light-harvesting applications including photovoltaics and luminescent solar concentrators. Despite a large body of literature on device-related studies of CISe(S) QDs, the understanding of their fundamental photophysical properties is surprisingly poor. Two particular subjects that are still heavily debated in the literature include the mechanism(s) for strong intragap emission and the reason(s) for a poorly defined (featureless) absorption edge, which often "tails" below the nominal bandgap. Here, we address these questions by conducting comprehensive spectroscopic studies of CIS QD samples with varied Cu-to-In ratios using resonant PL and PL excitation, femtosecond transient absorption, and magnetic circular dichroism measurements. These studies reveal a strong effect of stoichiometry on the concentration of Cu1+ vs Cu2+ defects (occurring as CuIn″ and CuCu• species, respectively), and their effects on QD optical properties. In particular, we demonstrate that the increase in the relative amount of Cu2+ vs Cu1+ centers suppresses intragap absorption associated with Cu1+ states and sharpens band-edge absorption. In addition, we show that both Cu1+ and Cu2+ centers are emissive but are characterized by distinct activation mechanisms and slightly different emission energies due to different crystal lattice environments. An important overall conclusion of this study is that the relative importance of the Cu2+ vs Cu1+ emission/absorption channels can be controlled by tuning the Cu-to-In ratio, suggesting that the control of sample stoichiometry represents a powerful tool for achieving functionalities (e.g., strong intragap emission) that are not accessible with ideal, defect-free materials.

Hot-electron dynamics in quantum dots manipulated by spin-exchange Auger interactions.

The ability to effectively manipulate non-equilibrium 'hot' carriers could enable novel schemes for highly efficient energy harvesting and interconversion. In the case of semiconductor materials, realization of such hot-carrier schemes is complicated by extremely fast intraband cooling (picosecond to subpicosecond time scales) due to processes such as phonon emission. Here we show that using magnetically doped colloidal semiconductor quantum dots we can achieve extremely fast rates of spin-exchange processes that allow for 'uphill' energy transfer with an energy-gain rate that greatly exceeds the intraband cooling rate. This represents a dramatic departure from the usual situation where energy-dissipation via phonon emission outpaces energy gains due to standard Auger-type energy transfer at least by a factor of three. A highly favourable energy gain/loss rate ratio realized in magnetically doped quantum dots can enable effective schemes for capturing kinetic energy of hot, unrelaxed carriers via processes such as spin-exchange-mediated carrier multiplication and upconversion, hot-carrier extraction and electron photoemission.

Dual-Emitting Dot-in-Bulk CdSe/CdS Nanocrystals with Highly Emissive Core- and Shell-Based Trions Sharing the Same Resident Electron.

Colloidal CdSe nanocrystals (NCs) overcoated with an ultrathick CdS shell, also known as dot-in-bulk (DiB) structures, can support two types of excitons, one of which is core-localized and the other, shell-localized. In the case of weak "sub-single-exciton" pumping, emission alternates between the core- and shell-related channels, which leads to two-color light. This property makes these structures uniquely suited for a variety of photonic applications as well as ideal model systems for realizing complex excitonic quasi-particles that do not occur in conventional core/shell NCs. Here, we show that the DiB design can enable an unusual regime in which the same long-lived resident electron can endow trionlike characteristics to either of the two excitons of the DiB NC (core- or shell-based). These two spectrally distinct trion states are apparent in the measured photoluminescence (PL) and spin dynamics of core and shell excitons conducted over a wide range of temperatures and applied magnetic fields. Low-temperature PL measurements indicate that core- and shell-based trions are characterized by a nearly ideal (∼100%) emission quantum yield, suggesting the strong suppression of Auger recombination for both types of excitations. Polarization-resolved PL experiments in magnetic fields of up to 60 T reveal that the core- and the shell-localized trions exhibit remarkably similar spin dynamics, which in both cases are controlled by spin-flip processes involving a heavy hole.

Sub-single-exciton lasing using charged quantum dots coupled to a distributed feedback cavity.

Colloidal semiconductor quantum dots (QDs) are attractive materials for realizing highly flexible, solution-processable optical gain media, but they are difficult to use in lasing because of complications associated with extremely short optical-gain lifetimes limited by nonradiative Auger recombination. By combining compositional grading of the QD's interior for hindering Auger decay with postsynthetic charging for suppressing parasitic ground-state absorption, we can reduce the lasing threshold to values below the single-exciton-per-dot limit. As a favorable departure from traditional multi-exciton-based lasing schemes, our approach should facilitate the development of solution-processable lasing devices and thereby help to extend the reach of lasing technologies into areas not accessible with traditional, epitaxially grown semiconductor materials.

Asymmetrically strained quantum dots with non-fluctuating single-dot emission spectra and subthermal room-temperature linewidths.

The application of colloidal semiconductor quantum dots as single-dot light sources still requires several challenges to be overcome. Recently, there has been considerable progress in suppressing intensity fluctuations (blinking) by encapsulating an emitting core in a thick protective shell. However, these nanostructures still show considerable fluctuations in both emission energy and linewidth. Here we demonstrate type-I core/shell heterostructures that overcome these deficiencies. They are made by combining wurtzite semiconductors with a large, directionally anisotropic lattice mismatch, which results in strong asymmetric compression of the emitting core. This modifies the structure of band-edge excitonic states and leads to accelerated radiative decay, reduced exciton-phonon interactions, and suppressed coupling to the fluctuating electrostatic environment. As a result, individual asymmetrically strained dots exhibit highly stable emission energy (<1 meV standard deviation) and a subthermal room-temperature linewidth (~20 meV), concurrent with nearly nonblinking behaviour, high emission quantum yields, and a widely tunable emission colour.

Charge-Transport Mechanisms in CuInSe xS2- x Quantum-Dot Films.

Colloidal quantum dots (QDs) have attracted considerable attention as promising materials for solution-processable electronic and optoelectronic devices. Copper indium selenium sulfide (CuInSe xS2- x or CISeS) QDs are particularly attractive as an environmentally benign alternative to the much more extensively studied QDs containing toxic metals such as Cd and Pb. Carrier transport properties of CISeS-QD films, however, are still poorly understood. Here, we aim to elucidate the factors that control charge conductance in CISeS QD solids and, based on this knowledge, develop practical approaches for controlling the polarity of charge transport and carrier mobilities. To this end, we incorporate CISeS QDs into field-effect transistors (FETs) and perform detailed characterization of these devices as a function of the Se/(Se+S) ratio, surface treatment, thermal annealing, and the identity of source and drain electrodes. We observe that as-synthesized CuInSe xS2- x QDs exhibit degenerate p-type transport, likely due to metal vacancies and CuIn'' anti-site defects (Cu1+ on an In3+ site) that act as acceptor states. Moderate-temperature annealing of the films in the presence of indium source and drain electrodes leads to switching of the transport polarity to nondegenerate n-type, which can be attributed to the formation of In-related defects such as InCu•• (an In3+ cation on a Cu1+ site) or Ini••• (interstitial In3+) acting as donors. We observe that the carrier mobilities increase dramatically (by 3 orders of magnitude) with increasing Se/(Se+S) ratio in both n- and p-type devices. To explain this observation, we propose a two-state conductance model, which invokes a high-mobility intrinsic band-edge state and a low-mobility defect-related intragap state. These states are thermally coupled, and their relative occupancies depend on both QD composition and temperature. Our observations suggest that the increase in the relative fraction of Se moves conduction- and valence band edges closer to low-mobility intragap levels. This results in increased relative occupancy of the intrinsic band-edge states and a corresponding growth of the measured mobility. Further improvement in charge-transport characteristics of the CISeS QD samples as well as their stability is obtained by infilling the QD films with amorphous Al2O3 using atomic layer deposition.

Enhanced Multiple Exciton Generation in PbS|CdS Janus-like Heterostructured Nanocrystals.

Generating multiple excitons by a single high-energy photon is a promising third-generation solar energy conversion strategy. We demonstrate that multiple exciton generation (MEG) in PbS|CdS Janus-like heteronanostructures is enhanced over that of single-component and core/shell nanocrystal architectures, with an onset close to two times the PbS band gap. We attribute the enhanced MEG to the asymmetric nature of the heteronanostructure that results in an increase in the effective Coulomb interaction that drives MEG and a reduction of the competing hot exciton cooling rate. Slowed cooling occurs through effective trapping of hot-holes by a manifold of valence band interfacial states having both PbS and CdS character, as evidenced by photoluminescence studies and ab initio calculations. Using transient photocurrent spectroscopy, we find that the MEG characteristics of the individual nanostructures are maintained in conductive arrays and demonstrate that these quasi-spherical PbS|CdS nanocrystals can be incorporated as the main absorber layer in functional solid-state solar cell architectures. Finally, based upon our analysis, we provide design rules for the next generation of engineered nanocrystals to further improve the MEG characteristics.

Droop-Free Colloidal Quantum Dot Light-Emitting Diodes.

Colloidal semiconductor quantum dots (QDs) are a highly promising materials platform for implementing solution-processable light-emitting diodes (LEDs). They combine high photostability of traditional inorganic semiconductors with chemical flexibility of molecular systems, which makes them well-suited for large-area applications such as television screens, solid-state lighting, and outdoor signage. Additional beneficial features include size-controlled emission wavelengths, narrow bandwidths, and nearly perfect emission efficiencies. State-of-the-art QD-LEDs exhibit high internal quantum efficiencies approaching unity. However, these peak values are observed only at low current densities ( J) and correspondingly low brightnesses, whereas at higher J, the efficiency usually exhibits a quick roll-off. This efficiency droop limits achievable brightness levels and decreases device longevity due to excessive heat generation. Here, we demonstrate QD-LEDs operating with high internal efficiencies (up to 70%) virtually droop-free up to unprecedented brightness of >100,000 cd m-2 (at ∼500 mA cm-2). This exceptional performance is derived from specially engineered QDs that feature a compositionally graded interlayer and a final barrier layer. This QD design allows for improved balance between electron and hole injections combined with considerably suppressed Auger recombination, which helps mitigate efficiency losses due to charge imbalance at high currents. These results indicate a significant potential of newly developed QDs as enablers of future ultrabright, highly efficient devices for both indoor and outdoor applications.