RESUMEN
Water dewetting generates static electricity. We reviewed historical experiments of this phenomenon, and we studied the charging of polymer slides and metal electrode supported polymer films withdrawn vertically from a pool of aqueous solutions. For pure water, charging was negative and surface charge densities increased with the speed of dewetting, which we explain by the thermally activated entrainment of nanometer-sized water droplets or clusters charged by unbalanced adsorbed electric double-layer ions. Surface charge densities increased for reduced polymer film thickness following a power law, which we explain by reduced discharge of the entrained water volumes. At low salinity c â² 10 µM, charging was proportional to electrokinetic interfacial charge densities: the negative charging was increased for alkaline solutions and for most salts at µM concentrations and the charge polarity was inversed to positive for a cationic surfactant, a salt with a highly positively charged cation, and for a strong acid at approximately pH 4. Charging was reduced again for c â³ 100 µM, especially at high dewetting speeds and for chaotropic ions, which we explain by the entrainment of larger and more discharged droplets. We determined adsorption energies of the charged water clusters on the dewetted surface from thermally stimulated discharge of the charged polymer slides and we show that the surface charge distribution, imaged by charged toner powders and measured microscopically by Kelvin probe force microscopy, is a record of the dewetting process that provides spatial and kinetic information about the three-phase contact line motion.
RESUMEN
FeII-terpyridine based oligomers have attracted considerable interest as key constituents for the realization of highly robust, ultra-thin ordered layers of metal center oligomers (MCOs) for organic electronics applications. By using molecular simulations and nanotribology investigations, we report on the origins of the surprisingly high mechanical and thermal stability in this type of MCO layers, which finds its expression in nanowear resistance values of up to 1.5 µN for the MCO films, as well as in a thermal stability of two-terminal MCO junctions to temperatures up to â¼100 °C under electrical load. A theoretical analysis of the fundamental cohesive forces among the constituents within the context of an electrostatic model reveal that the cohesive energy is essentially based on Coulomb interactions among the ionic constituents of the oligomers, leading to an estimated cohesive energy per molar mass of 0.0132 eV mol g-1 for MCO layers that advantageously compare to the 0.0061 eV mol g-1 reported for pentacene crystals.
RESUMEN
Ultrathin molecular layers of Fe(II) -terpyridine oligomers allow the fabrication of large-area crossbar junctions by conventional electrode vapor deposition. The junctions are electrically stable for over 2.5 years and operate over a wide range of temperatures (150-360 K) and voltages (±3 V) due to the high cohesive energy and packing density of the oligomer layer. Electrical measurements reveal ideal Richardson-Shottky emission in surprising agreement with electrochemical, optical, and photoemission data.
RESUMEN
The alignment of the electrode Fermi level with the valence or conduction bands of organic semiconductors is a key parameter controlling the efficiency of organic light-emitting diodes, solar cells, and printed circuits. Here, we introduce a class of organic molecules that form highly robust dipole layers, capable of shifting the work function of noble metals (Au and Ag) down to 3.1 eV, that is, â¼1 eV lower than previously reported self-assembled monolayers. The physics behind the considerable interface dipole is elucidated by means of photoemission spectroscopy and density functional theory calculations, and a polymer diode exclusively based on the surface modification of a single electrode in a symmetric, two-terminal Au/poly(3-hexylthiophene)/Au junction is presented. The diode exhibits the remarkable rectification ratio of â¼2·10(3), showing high reproducibility, durability (>3 years), and excellent electrical stability. With this evidence, noble metal electrodes with work function values comparable to that of standard cathode materials used in optoelectronic applications are demonstrated.
RESUMEN
Tethered bilayer lipid membranes (tBLMs) are promising model architectures that mimic the structure and function of natural biomembranes. They provide a fluid, stable, and electrically sealing platform for the study of membrane related processes, specifically, the function of incorporated membrane proteins. This paper presents a generic approach toward the synthesis of functional tBLMs adapted for application to various surfaces. The central element of a tethered membrane consists of a lipid bilayer. Its proximal layer is covalently attached via a spacer unit to a solid support, either gold or silicon oxide. The membranes are characterized optically by using surface plasmon resonance spectroscopy (SPR) or ellipsometry and electrically by using electrochemical impedance spectroscopy (EIS). The bilayer membranes obtained show high electrical barrier properties and can be used to incorporate and study small membrane proteins in a functional form.
Asunto(s)
Lípidos/química , Electroquímica , Membrana Dobles de Lípidos/química , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Estructura Molecular , Especificidad por Sustrato , Resonancia por Plasmón de SuperficieRESUMEN
Tethered membranes have been proven during recent years to be a powerful and flexible biomimetic platform. We reported in a previous article on the design of a new architecture based on the self-assembly of a thiolipid on ultrasmooth gold substrates, which shows extremely good electrical sealing properties as well as functionality of a bilayer membrane. Here, we describe the synthesis of lipids for a more modular design and the adaptation of the linker part to silane chemistry. We were able to form a functional tethered bilayer lipid membrane with good electrical sealing properties covering a silicon oxide surface. We demonstrate the functional incorporation of the ion carrier valinomycin and of the ion channel gramicidin.
Asunto(s)
Biofisica/métodos , Canales Iónicos/química , Membrana Dobles de Lípidos/química , Lípidos/química , Análisis por Matrices de Proteínas/métodos , Silanos/química , Dióxido de Silicio/química , Impedancia Eléctrica , Electroquímica , Oro/química , Gramicidina/farmacología , Ionóforos/farmacología , Iones , Membrana Dobles de Lípidos/metabolismo , Microscopía de Fuerza Atómica , Modelos Químicos , Fosfatidilcolinas/química , Fitol/química , Silanos/metabolismo , Silicio/química , Espectrofotometría , Especificidad por Sustrato , Temperatura , Factores de Tiempo , Valinomicina/química , Valinomicina/farmacologíaRESUMEN
This work establishes the compatibility of surface plasmon resonance imaging (SPR-i) with the visualization of localized electropolymerization. The "writing" of polypyrrole and polypyrrole-oligonucleotide patterns onto thin gold films is demonstrated using scanning electrochemical microcopy (SECM), while an optical method, SPR-i, simultaneously detected the formed micropatterns. The combination of these two methods, SECM/SPR-i, has the advantage of not only controlling the patterning process but also providing unique information on the micropattern formation. The influence of the pulsing time and the monomer concentration on the spot size and its characteristics has been investigated in detail using SPR-i. Fluorescence microscopy and atomic force microscopy have also been used to support the data obtained by SPR-i.
Asunto(s)
Microscopía Electrónica de Rastreo/instrumentación , Microscopía Electrónica de Rastreo/métodos , Oligonucleótidos/química , Polímeros/química , Pirroles/química , Resonancia por Plasmón de Superficie/instrumentación , Resonancia por Plasmón de Superficie/métodos , Oro/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
The Kondo resonance of Co adatoms on the Cu(100) and Cu(111) surfaces has been studied by scanning tunneling spectroscopy. We demonstrate the scaling of the Kondo temperature T(K) with the host electron density at the magnetic impurity. The quantitative analysis of the tunneling spectra reveals that the Kondo resonance is dominated by the Cu bulk electrons. While at the Cu(100) surface both tunneling into the hybridized localized state and into the substrate conduction band contribute to the Kondo resonance, the latter channel is found to be dominant for Cu(111).