RESUMEN
Epidemiological studies have reported an association between chronic cadmium (Cd) exposure and increased cardiovascular risk; however, their causal relationship remains unclear. The aim of this study is to explore the effects of Cd exposure on the cardiac and arterial systems in mice. According to the concentration of cadmium chloride in drinking water, male mice were randomly divided into control and low-dose and high-dose Cd exposure groups. The intervention duration was 12 weeks. In cardiac tissues, Cd exposure led to focal necrosis, myofibril disarray, perivascular and interstitial fibrosis, and disorganized sarcomere structures. Cd also induced the apoptosis of cardiomyocytes and increased the expression levels of matrix metalloproteinase (MMP)-2 and MMP-14 in cardiac tissues. In the arterial tissues, Cd exposure damaged the intimal and medial layers of the aorta. Cd further reduced the viability of aortic smooth muscle cells in vitro. This study provides evidence for the Cd-induced damage of the cardiovascular system, which may contribute to various cardiovascular diseases.
Asunto(s)
Cadmio , Corazón , Ratones , Masculino , Animales , Cadmio/toxicidad , Cadmio/metabolismo , Cloruro de Cadmio/metabolismo , Pulmón/metabolismo , AortaRESUMEN
This study used a rapid and simple microwave-assisted synthesis method to grow ZnO nanoneedle arrays on the silicon substrate with the ZnO seed layer. The effects of reaction temperature and time on the lengths of ZnO nanoneedle arrays were investigated. The appropriate temperature programming step can grow the longer ZnO nanoneedle arrays at the same reaction time (25 min), which is 2.08 times higher than without the temperature programming step. The geometry of the ZnO nanoneedle arrays features a gradual decrease from the Si substrate to the surface, which provides an excellent progressive refractive index between Si and air, resulting in excellent antireflection properties over an extensive wavelength range. In addition, the ZnO nanoneedle arrays exhibit a suitable structure for uniform deposition of Ag nanoparticles, which can provide three-dimensional hot spots and surface active sites, resulting in higher surface-enhanced Raman scattering (SERS) enhancement, high uniformity, high reusability, and low detection limit for R6G molecule. The ZnO/Ag nanoneedle arrays can also reveal a superior SERS-active substrate detecting amoxicillin (10-8 M). These results are promising for applying the SERS technique for rapid low-concentration determination in different fields.
RESUMEN
Photodetectors are widely applied in modern industrial fields because they convert light energy into electrical signals. We propose a printable silver (Ag) paste electrode for a highly flexible metal-semiconductor-metal (MSM) broadband visible light photodetector as a wearable and portable device. Single-crystal and surface-textured silicon substrates with thicknesses of 37.21 µm were fabricated using a wet etching process. Surface texturization on flexible Si substrates enhances the light-trapping effect and minimizes reflectance from the incident light, and the average reflectance is reduced by 16.3% with pyramid-like structures. In this study, semitransparent, conductive Ag paste electrodes were manufactured using a screen-printing with liquid-phase process to form a flexible MSM broadband visible light photodetector. The transmittance of the homemade Ag paste solution fell between 34.83% and 36.98% in the wavelength range of visible light, from 400 nm to 800 nm. The highest visible light photosensitivity was 1.75 × 104 at 19.5 W/m2. The photocurrents of the flexible MSM broadband visible light photodetector were slightly changed under concave and convex conditions, displaying stable and durable bending properties.
RESUMEN
In recent decades, zebrafish have become an increasingly popular laboratory organism in several fields of research due to their ease of reproduction and rapid maturation. In particular, shoaling behavior has attracted the attention of many researchers. This article presents a fully printed robotic model used to sense and stimulate shoaling behavior in zebrafish (Danio rerio). Specifically, we exposed laboratory-fabricated replicated materials to critical acid/base/salt environments and evaluated the mechanical, optical, and surface properties after a three-month immersion period. Focusing on weatherability, these test samples maintained high tensile strength (~45 MPa) and relatively similar transmission (>85%T in the visible region), as determined by UV−vis/FTIR spectroscopy. Three-dimensional (3D) printing technology allowed printing of models with different sizes and appearances. We describe the sense of zebrafish responses to replicas of different sizes and reveal that replicas approximating the true zebrafish size (3 cm) are more attractive than larger replicas (5 cm). This observation suggests that larger replicas appear as predators to the zebrafish and cause fleeing behavior. In this study, we determined the weatherability of a high-transparency resin and used it to fabricate a fully printed driving device to induce shoaling by zebrafish. Finally, we demonstrate a weathering-resistant (for three months) 3D-printed decoy model with potential utility for future studies of outdoor shoaling behavior, and the result has the potential to replace the traditional metal frame devices used in outdoor experiments.
Asunto(s)
Procedimientos Quirúrgicos Robotizados , Pez Cebra , Animales , Conducta Animal/fisiología , Impresión Tridimensional , Conducta SocialRESUMEN
Cadmium (Cd) is hazardous to human health because of its toxicity and long half-life of clearance. Many studies have explored the relationship between chronic Cd exposure and different human diseases. However, most of the studies limited the study targets of Cd toxicity to two or three organ systems. The goal of this study was to establish a mouse model of Cd accumulation in most organ systems and to particularly investigate the potential toxic effects of Cd to the cardiovascular system. Mice were divided into three groups: the control group, Cd-100 group, and Cd-200 group. In the control group, Cd was detected in the kidney, lung, liver, heart and urine but was undetectable in the aorta, intestine, thigh bone, spinal bone and serum. Upon chronic exposure in the Cd-100 and Cd-200 groups, Cd accumulated in all tissues, with a dramatic increase in concentration. We confirmed that Cd could accumulate significantly in the heart and aorta upon chronic exposure. This finding might help to explain the potential toxic effects of Cd on these organs. In addition, the calcium concentration in the bones and kidney declined when the exposure to Cd increased. This finding aligned with the negative effects of Cd on bony mineralization and the potential direct toxic effects of Cd on bones. The impacts of Cd on the cardiovascular system were explored. Histologically, chronic Cd exposure led to myocytes hypertrophy and myocardial architecture disarray in the Cd-100 group compared to those in the control group. Our research confirms that Cd can accumulate in all of the organs studied upon chronic exposure, and suggests that the toxicity of Cd accumulation may play important roles in mediating the pathophysiologic effects in these target organs, especially the bone and heart.
RESUMEN
Conventional electrodes in typical photodetectors only conduct electrical signals and introduce high optical reflection, impacting the optical-to-electrical conversion efficiency. The created surface solar harvester with a multi-functional folded electrode (MFFE) realizes both a three-dimensional Schottky junction with a larger light detecting area as well as low optical reflection from 300 nm (ultra-violet light) to 1100 nm (near-infrared light) broadly without an additional anti-reflection layer. The MFFE needs silicon etching following the lithography process. The metal silver was deposited over structured silicon, completing the whole device simply. According to the experimental results, the width ratio of the bottom side to the top side in MFFE was 15.75, and it showed an optical reflection of 5-7% within the major solar spectrum of AM1.5G by the gradient refractive index effect and the multi-scattering phenomenon simultaneously. While the perovskite materials were deposited over the MFFE structure of the solar harvester, the three-dimensional electrode with lower optical reflection benefitted the perovskite solar cell with a larger detecting area and an additional anti-reflection function to absorb solar energy more efficiently. In this concept, because of the thin stacked film in the perovskite solar cell, the solar energy could be harvested by the prepared Schottky junction of the solar harvester again, except for the optical absorption of the perovskite materials. Moreover, the perovskite materials deposited over the MFFE structure could not absorb near-infrared (NIR) energies to become transparent. The NIR light could be harvested by the light detecting junction of the solar harvester to generate effective photocurrent output additionally for extending the detection capability of perovskite solar cell further. In this work, the concept of integration of a conventional perovskite solar cell with a silicon-based solar harvester having an MFFE structure was proposed and is expected to harvest broadband light energies under low optical reflection and enhance the solar energy conversion efficiency.
RESUMEN
A pyrene-based derivative, 2-((pyrene-1-ylmethylene)amino)ethanol (PE) nanoparticle, was encapsulated via water-in-oil-in-water (W/O/W) double emulsion with the solvent evaporation method by one-pot reaction and utilized as a fluorescence turn-on sensor for detecting Fe3+, Cr3+, and Al3+ ions. Magnetic nanoparticles (MNPs) embedded in polycaprolactone (PCL) were used as the magnetic-sensitive polyelectrolyte microcapsule-triggered elements in the construction of the polymer matrix. The microcapsules were characterized by ultraviolet-visible (UV-Vis) and photoluminescence (PL) titrations, quantum yield (Φf) calculations, 1H nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), and superconducting quantum interference device magnetometry (SQUID) studies. This novel responsive release of the microcapsule fluorescence of the turn-on sensor for detecting trivalent cations was due to the compound PE and the MNPs being incorporated well within the whole system, and an effective thermal and kinetic energy transfer between the core and shell structure efficiently occurred in the externally oscillating magnetic field. The magnetic-sensitive fluorescence turn-on microcapsules show potential for effective metal ion sensing in environmental monitoring and even biomedical applications. Under the optimal controlled-release probe fluorescence conditions with high-frequency magnetic field treatment, the limit of detection (LOD) reached 1.574-2.860 µM and recoveries ranged from 94.7-99.4% for those metals in tap water.
RESUMEN
We report that Fe3O4@Au core-shell nanoparticles (NPs) serve as a multifunctional molecule delivery platform. This platform is also suitable for sensing the doxorubicin (DOX) through DNA hybridization, and the amount of carried DOX molecules was determined by size-dependent Fe3O4@Au NPs. The limits of detection (LODs) for DOX was found to be 1.839 nM. In our approach, an Au nano-shell coating was coupled with a specially designed DNA sequence using thiol bonding. By means of a high-frequency magnetic field (HFMF), a high release percentage of such a molecule could be efficiently achieved in a relatively short period of time. Furthermore, the thickness increase of the Au nano-shell affords Fe3O4@Au NPs with a larger surface area and a smaller temperature increment due to shielding effects from magnetic field. The change of magnetic property may enable the developed Fe3O4@Au-dsDNA/DOX NPs to be used as future nanocarrier material. More importantly, the core-shell NP structures were demonstrated to act as a controllable and efficient factor for molecule delivery.
RESUMEN
An intrinsically luminescent curcumin-modified nanodiamond derivative (ND-Cur) has been synthesized as an effective probe for cell imaging and sensory applications. DLS data allowed the particle size of ND-Cur to be estimated (170.6 ± 46.8 nm) and the zeta potential to be determined. The photoluminescence signal of ND-Cur was observed at 536 nm, with diverse intensities at excitation wavelengths of 350 to 450 nm, producing yellow emission with a quantum yield (Φ) of 0.06. Notably, the results of the MTT assay and cell imaging experiments showed the low toxicity and biocompatibility of ND-Cur. Subsequently, investigations of the selectivity towards Mg2+ and Mn2+ ions were performed by measuring intense fluorescence peak shifts and "Turn-off" responses, respectively. In the presence of Mg2+, the fluorescence peak (536 nm) was shifted and then displayed two diverse peaks at 498 and 476 nm. On the other hand, for Mn2+ ions, ND-Cur revealed a fluorescence-quenching response at 536 nm. Fluorescence studies indicated that the nanomolar level detection limits (LODs) of Mg2+ and Mn2+ ions were approximately 423 and 367 nM, respectively. The sensing mechanism, ratiometric changes and binding site were established through PL, FTIR, Raman, SEM, TEM, DLS and zeta potential analyses. Furthermore, the effective determination of Mg2+ and Mn2+ ions by ND-Cur has been validated through cell imaging experiments.
RESUMEN
Direct ink-jet printing of a zinc-oxide-based thin-film transistor (ZnO-based TFT) with a three-dimensional (3-D) channel structure was demonstrated for ultraviolet light (UV) and visible light photodetection. Here, we demonstrated the channel structures by which temperature-induced Marangoni flow can be used to narrow the channel width from 318.9 ± 44.1 µm to 180.1 ± 13.9 µm via a temperature gradient. Furthermore, a simple and efficient oxygen plasma treatment was used to enhance the electrical characteristics of switching ION/IOFF ratio of approximately 105. Therefore, the stable and excellent gate bias-controlled photo-transistors were fabricated and characterized in detail for ultraviolet (UV) and visible light sensing. The photodetector exhibited a superior photoresponse with a significant increase of more than 2 orders of magnitude larger drain current generated upon UV illumination. The results could be useful for the development of UV photodetectors by the direct-patterning ink-jet printing technique. Additionally, we also have successfully demonstrated that a metal-semiconductor junction structure that enables plasmon energy detection by using the plasmonic effects is an efficient conversion of plasmon energy to an electrical signal. The device showed a significant variations negative shift of threshold voltage under different light power density with exposure of visible light. With the ZnO-based TFTs, only ultraviolet light detection extends to the visible light wavelength.
RESUMEN
Highly transparent zinc oxide (ZnO)-based thin-film transistors (TFTs) with gold nanoparticles (AuNPs) capable of detecting visible light were fabricated through spray pyrolysis on a fluorine-doped tin oxide substrate. The spray-deposited channel layer of ZnO had a thickness of approximately 15 nm, and the thickness exhibited a linear increase with an increasing number of sprays. Furthermore, the ZnO thin-film exhibited a markedly smoother channel layer with a significantly lower surface roughness of 1.84 nm when the substrate was 20 cm from the spray nozzle compared with when it was 10 cm away. Finally, a ZnO and Au-NP heterojunction nanohybrid structure using plasmonic energy detection as an electrical signal, constitutes an ideal combination for a visible-light photodetector. The ZnO-based TFTs convert localized surface plasmon energy into an electrical signal, thereby extending the wide band-gap of materials used for photodetectors to achieve visible-light wavelength detection. The photo-transistors demonstrate an elevated on-current with an increase of the AuNP density in the concentration of 1.26, 12.6, and 126 pM and reach values of 3.75, 5.18, and 9.79 × 10-7 A with applied gate and drain voltages. Moreover, the threshold voltage (Vth) also drifts to negative values as the AuNP density increases.
RESUMEN
Highly emissive cysteamine-capped gold-copper bimetallic nanoclusters (CA-AuCu NCs) with a quantum yield of 18% were synthesized via one-pot anti-galvanic reduction. The CA-AuCu NCs were characterized by HR-TEM, XPS, FTIR, MALDI-TOF mass spectrometry, DLS, and zeta potential analyses. The NCs are shown to be viable fluorescent probes for Cr(VI) ions and dopamine (DA) via quenching of the blue fluorescence, typically measured at excitation/emission wavelengths of 350/436 nm. During DA recognition, a dark brown color appears, which is distinguishable from that of Cr(VI) detection. The aggregation induced quenching due to electron transfer was demonstrated by photoluminescence, HR-TEM, FTIR, DLS, and zeta potential interrogations. In buffer of pH 7, response is linear in the 0.2 ~ 100 µM for Cr(VI) and from 0.4 ~ 250 µM for DA. The respective detection limits are 80 and 135 nM. The method was applied to the determination of both Cr(VI) and DA in (spiked) tap, lake and sea water, and in human urine samples. The low toxicity of CA-AuCu NCs was validated by the MTT assay, and their responses to Cr(VI) ions and DA was also proven by Raw 264.7 cell imaging. Graphical abstractCysteamine capped Au-Cu nanoclusters (CA-AuCu NCs) were synthesized via one-pot anti-galvanic reduction and utilized in sensing of Cr(VI) ions and dopamine (DA) with demonstrated real/urine and cell imaging applications.
RESUMEN
A high-quality HfGeOx interfacial layer (IL) was formed in a HfO2/Al2O3/HfO2/GeOx gate stack through thermal annealing. The diffusing of GeO into the HfO2 layer led to the mixing of the GeOx and HfO2 layers, as identified through energy-dispersive X-ray Spectroscopy (EDX). X-ray photo-electron spectroscopy (XPS) data for HfGeOx IL confirmed the formation of Ge-O-Hf bonds owing to the induced shift of the Ge3dox spectra to lower binding energies. The electrical and reliability data indicated that the capacitor with HfGeOx IL presented not only lower interface states density (Dit, approximately 7 × 1011 eV-1cm-2) but also less Dit increment (approximately 3 × 1011 eV-1cm-2) after stressing than did the capacitor without the HfGeOx IL. Moreover, the Ge p-metal-oxide-semiconductor field-effect transistor HfGeOx IL exhibited a high effective hole mobility (approximately 704 cm2/V s).
RESUMEN
Novel Cd2+ ions mediated reproducible hybrid graphite-diamond nanowire (G-DNWs; Cd2+-NDS1 NW) growth from 4-Amino-5-phenyl-4H-1,2,4-triazole-3-thiol (S1) functionalized diamond nanoparticles (NDS1) via supramolecular assembly is reported and demonstrated through TEM and AFM images. FTIR, EDX and XPS studies reveal the supramolecular coordination between functional units of NDS1 and Cd2+ ions towards NWs growth. Investigations of XPS, XRD and Raman data show the covering of graphite sheath over DNWs. Moreover, HR-TEM studies on Cd2+-NDS1 NW confirm the coexistence of less perfect sp² graphite layer and sp³ diamond carbon along with impurity channels and flatten surface morphology. Possible mechanisms behind the G-DNWs growth are proposed and clarified. Subsequently, conductivity of the as-grown G-DNWs is determined through the fabrication of a single Cd2+-NDS1 NW device, in which the G-DNW portion L2 demonstrates a better conductivity of 2.31 × 10-4 mS/cm. In addition, we investigate the temperature-dependent carrier transport mechanisms and the corresponding activation energy in details. Finally, comparisons in electrical resistivities with other carbon-based materials are made to validate the importance of our conductivity measurements.
RESUMEN
New glutamic acid (Glu) and polyethylenimine (PE) functionalized ultra-stable gold nanoparticles (PE-Glu-AuNPs) were developed via a simple NaBH4 reduction method. The low toxicity and biocompatibility of PE-Glu-AuNPs were confirmed via an MTT assay in Raw 264.7â¯cells. Excitingly, PE-Glu-AuNPs were found to be extremely stable at room temperature up to six months and were utilized in an effective colorimetric naked eye assay of clenbuterol (CLB) and ractopamine (RCT) at pH 5. It was found that the selective assay of CLB and RCT is not affected by any other interferences (such as alanine, phenylalanine, NaCl, CaCl2, threonine, cysteine, glycine, glucose, urea and salbutamol). Furthermore, the detection of these ß-agonists can be visually accomplished through change color from wine red to purple blue. Notably, the aggregation induced detection of CLB and RCT was well confirmed through transmission electron microscopy (TEM) and dynamic light scattering (DLS) studies. DLS investigations, clearly showed, that in the presence of CLB and RCT, the initial size of PE-Glu-AuNPs (12.8⯱â¯8.6â¯nm) was changed to 84.8⯱â¯52.3 and 79.5⯱â¯47.8â¯nm, respectively, via aggregation. Furthermore, the colorimetric assays of CLB and RCT with PE-Glu-AuNPs were effective starting from CLB and RCT concentrations of 200â¯nM and 400â¯nM, respectively, and could be visualized using the naked eyes. Remarkably, UV-vis titrations of PE-Glu-AuNPs with CLB and RCT could be used to well estimate their sub nanomolar detection limits (LODs) via standard deviation and linear fittings. The contribution of surface functional groups that support the analyte recognition was confirmed by fourier-transform infrared spectroscopy (FTIR) analysis. Moreover, the CLB and RCT assays with PE-Glu-AuNPs were supported by examination of human urine samples.
Asunto(s)
Clenbuterol/orina , Colorimetría , Oro/química , Nanopartículas del Metal/química , Fenetilaminas/orina , Animales , Supervivencia Celular/efectos de los fármacos , Ácido Glutámico/química , Ácido Glutámico/farmacología , Oro/farmacología , Humanos , Ratones , Tamaño de la Partícula , Polietileneimina/química , Polietileneimina/farmacología , Células RAW 264.7 , Propiedades de SuperficieRESUMEN
We report an affordable wet chemical route for the reproducible hybrid graphite-diamond nanowires (G-DNWs) growth from cysteamine functionalized diamond nanoparticles (ND-Cys) via pH induced self-assembly, which has been visualized through SEM and TEM images. Interestingly, the mechanistic aspects behind that self-assembly directed G-DNWs formation was discussed in details. Notably, above self-assembly was validated by AFM and TEM data. Further interrogations by XRD and Raman data were revealed the possible graphite sheath wrapping over DNWs. Moreover, the HR-TEM studies also verified the coexistence of less perfect sp2 graphite layer wrapped over the sp3 diamond carbon and the impurity channels as well. Very importantly, conductivity of hybrid G-DNWs was verified via fabrication of a single G-DNW. Wherein, the better conductivity of G-DNW portion L2 was found as 2.4 ± 1.92 × 10-6 mS/cm and revealed its effective applicability in near future. In addition to note, temperature dependent carrier transport mechanisms and activation energy calculations were reported in details in this work. Ultimately, to demonstrate the importance of our conductivity measurements, the possible mechanism behind the electrical transport and the comparative account on electrical resistivities of carbon based materials were provided.
RESUMEN
The waste from semiconductor manufacturing processes causes serious pollution to the environment. In this work, a non-toxic material was developed under room temperature conditions for the fabrication of green electronics. Flexible organic thin-film transistors (OTFTs) on plastic substrates are increasingly in demand due to their high visible transmission and small size for use as displays and wearable devices. This work investigates and analyzes the structured formation of aqueous solutions of the non-toxic and biodegradable biopolymer, chitosan, blended with high-k-value, non-toxic, and biocompatible Y2O3 nanoparticles. Chitosan thin films blended with Y2O3 nanoparticles were adopted as the gate dielectric thin film in OTFTs, and an improvement in the dielectric properties and pinholes was observed. Meanwhile, the on/off current ratio was increased by 100 times, and a low leakage current was observed. In general, the blended chitosan/Y2O3 thin films used as the gate dielectric of OTFTs are non-toxic, environmentally friendly, and operate at low voltages. These OTFTs can be used on surfaces with different curvature radii because of their flexibility.
RESUMEN
A flexible and miniaturized metal semiconductor metal (MSM) biomolecular photodetector was developed as the core photocurrent system through chemiluminescence for hydrogen peroxide sensing. The flexible photocurrent sensing system was manufactured on a 30-µm-thick crystalline silicon chip by chemical etching process, which produced a flexible silicon chip. A surface texturization design on the flexible device enhanced the light-trapping effect and minimized reflectivity losses from the incident light. The model protein streptavidin bound to horseradish peroxidase (HRP) was successfully immobilized onto the sensor surface through high-affinity conjugation with biotin. The luminescence reaction occurred with luminol, hydrogen peroxide and HRP enzyme, and the emission of light from the catalytic reaction was detected by underlying flexible photodetector. The chemiluminescence in the miniaturized photocurrent sensing system was successfully used to determine the hydrogen peroxide concentration in real-time analyses. The hydrogen peroxide detection limit of the flexible MSM photodetector was 2.47mM. The performance of the flexible MSM photodetector maintained high stability under bending at various bending radii. Moreover, for concave bending, a significant improvement in detection signal intensity (14.5% enhancement compared with a flat configuration) was observed because of the increased photocurrent, which was attributed to enhancement of light trapping. Additionally, this detector was used to detect hydrogen peroxide concentrations in commercial hair dye products, which is a significant issue in the healthcare field. The development of this novel, flexible and miniaturized MSM biomolecular photodetector with excellent mechanical flexibility and high sensitivity demonstrates the applicability of this approach to future wearable sensor development efforts.
Asunto(s)
Técnicas Biosensibles , Peróxido de Hidrógeno/aislamiento & purificación , Luminiscencia , Tinturas para el Cabello/química , Peroxidasa de Rábano Silvestre/química , Humanos , Peróxido de Hidrógeno/química , Luminol/química , SemiconductoresRESUMEN
Nanodiamonds were modified such that they carry thiol groups (ND-thiol). Gold nanoparticles were reacted with ND-thiol to obtain a highly stable conjugate of the type ND@AuNPs. Both ND-thiol and the ND@AuNPs were characterized by SEM, TEM, AFM, DLS, zeta potential, XPS, XRD, UV-Vis, Raman, FTIR and cytotoxicity studies. Their biocompatibility was confirmed via an MTT assay with HeLa cells. At a pH value of 6, the ND@AuNPs represent a colorimetric probe that can be used to selectively detect the illegally used ß-adrenergic drug clenbuterol (CLB) and the pollutant chromium(III). Detection can be performed visually by monitoring the color change from wine red to purple blue, or by colorimetric measurement of the so-called SPR peaks at 651 and 710 nm. The color changes are due to aggregation, and this is confirmed by TEM and DLS data. The involvement of surface functional groups that assist in analyte recognition was verified by FTIR. The detection limits are 0.49 nM for CLB, and 0.37 nM for Cr(III). The ND@AuNPs were successfully applied to the determination of Cr(III) and CLB in spiked human urine samples. Notably, the low interference by other ions in the detection of Cr(III) in tap and lake water is confirmed by ICP-MS analyses. Graphical abstract Nanodiamonds carrying thiol groups (ND-Thiol) were conjugated to gold nanoparticles, and the resulting ND@AuNPs are shown to be viable probes for the colorimetric detection of sub-nanomolar levels of clenbuterol (CLB) and Cr(III) ions, with demonstrated applicability to real water and urine samples.
Asunto(s)
Cromo/orina , Clenbuterol/orina , Colorimetría/métodos , Nanopartículas del Metal/química , Nanodiamantes/química , Oro , Células HeLa , Humanos , Límite de Detección , Sondas Moleculares/química , Compuestos de Sulfhidrilo/químicaRESUMEN
In this paper we report the first observation, through X-ray diffraction, of noncovalent uracil-uracil (U-U) dimeric π-stacking interactions in carbon nanotube (CNT)-based supramolecular assemblies. The directionally oriented morphology determined using atomic force microscopy revealed highly organized behavior through π-stacking of U moieties in a U-functionalized CNT derivative (CNT-U). We developed a dispersion system to investigate the bio-inspired interactions between an adenine (A)-terminated poly(3-adeninehexyl thiophene) (PAT) and CNT-U. These hybrid CNT-U/PAT materials interacted through π-stacking and multiple hydrogen bonding between the U moieties of CNT-U and the A moieties of PAT. Most importantly, the U···A multiple hydrogen bonding interactions between CNT-U and PAT enhanced the dispersion of CNT-U in a high-polarity solvent (DMSO). The morphology of these hybrids, determined using transmission electron microscopy, featured grape-like PAT bundles wrapped around the CNT-U surface; this tight connection was responsible for the enhanced dispersion of CNT-U in DMSO.