Supercritical carbon dioxide application using hydantoin acrylamide for biocidal functionalization of polyester.

Biocidal functionalization in polyester fibers is a really tough challenge because of the lack of tethering groups. This study indicated supercritical carbon dioxide application using N-halamine would be an alternative solution for obtaining antibacterial function on the polyester surface. Firstly, N-(2-methyl-1-(4-methyl-2,5-dioxo-imidazolidin-4 yl)propan-2 yl)acrylamide was synthesized and applied to the polyester in supercritical carbon dioxide medium, at 120 °C, 30 MPa for different processing times. The addition of N-halamine on the surface significantly brought antibacterial activity against E. coli. The chlorine loadings showed that 6 -h exposure time was critical to obtain sufficient antibacterial activity. This treatment caused a reasonable and tolerable loss in color and mechanical properties. But, the durability to abrasion, stability, and rechargeability of oxidative chlorine, and the durability of N-halamine on the surface were remarkably good. Conclusively, it can be available to work on polyester surfaces with resource-efficient and eco-friendly supercritical carbon dioxide technique for getting more functionalization and modification.

Inter- and intramolecular mechanisms for chlorine rearrangements in trimethyl-substituted N-chlorohydantoins.

The antimicrobial compounds 1-chloro-3,5,5-trimethylhydantoin and 3-chloro-1,5,5-trimethylhydantoin (1 and 2, respectively) have been synthesized and examined via a joint experimental and computational study. The measured rate of loss of oxidative chlorine in the absence and presence of exposure to UVA irradiation determined 2 to be less stable than 1. An interesting migration reaction was observed during UVA irradiation that featured the production of chlorine rearrangement and dechlorinated compounds. Two novel hydrogen atom transfer reaction (HATR) mechanisms have been proposed: (1) an intramolecular process in which a hydrogen atom undergoes a series of sigmatropic shifts, and (2) an intermolecular pathway in which a radical abstracts a hydrogen atom from a neighboring molecule. Density functional theory (DFT) calculations at the UB3LYP/6-311G++(2d,p) theory level have been employed to elucidate the preferred reaction pathway. Both proposed HATR mechanisms predicted 2 to possess a lower free energy of activation, ΔG(‡), relative to 1 in accordance with the experimental stability measurements. However, the intermolecular route had an overall lower absolute ΔG(‡) and was more consistent with measured product ratios in solution. The intermolecular reaction pathway, unlike the intramolecular route, also predicted the lack of formation of a migration product featuring a Cl covalently bonded to a methylene group at the 5-position of the hydantoin moiety, which was verified by NMR experiments.

N-halamine copolymers for use in antimicrobial paints.

A series of copolymers containing units of a novel hydantoinylacrylamide and the sodium salt of 2-(acrylamido)-2-methylpropanesulfonic acid have been synthesized. The homopolymer of the hydantoinylacrylamide compound was insoluble in water, while the copolymers with the sulfonic acid sodium salt were water-dispersible/soluble, with the solution becoming completely transparent when the feed ratio for the copolymer contained 7 parts of the hydantoin moiety to 3 parts of the sodium sulfonate moiety. The polymers were added into a commercial water-based latex paint, and upon drying, the painted surfaces treated with the water-miscible copolymers were rendered antimicrobial following chlorination with dilute household bleach. The chlorinated homopolymer failed to provide an antimicrobial property for the paint because of its tendency to isolate into aggregates in the paint, while the completely miscible copolymers were capable of 6-log inactivation of Staphylococcus aureus and Escherichia coli O157:H7 within 5 min of contact time.

Polymeric antimicrobial N-halamine epoxides.

A new N-halamine copolymer has been prepared, characterized, and evaluated for antimicrobial efficacy, stability toward hydrolyses, and stability toward UVA degradation when covalently bound to cellulose fibers. A copolymer of 3-chloro-2-hydroxypropylmethacrylate and glycidyl methacrylate was coated onto cotton, and, after curing, was treated with an aqueous solution containing the potassium salt of 5,5-dimethylhydantoin to form a coating which became antimicrobial upon exposure to househod bleach (sodium hypochlorite). The coating inactivated S. aureus and E. coli O157:H7 within minutes of contact time and was quite stable toward washing and UVA photodegradation.

N-halamine biocidal coatings via a layer-by-layer assembly technique.

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.

Mechanism of photolytic decomposition of N-halamine antimicrobial siloxane coatings.

Generally, antimicrobial N-halamine siloxane coatings can be rehalogenated repetitively upon loss of their biocidal efficacies, a marked advantage over coatings containing other antimicrobial materials. However, the N-halamine materials tend to slowly decompose upon exposure to ultraviolet irradiation as in direct sunlight. In this work the mechanism of photolytic decomposition for the N-halamine siloxanes has been studied using spectroscopic and theoretical methods. It was found that the N-chlorinated coatings slowly decomposed upon UVA irradiation, whereas the unhalogenated coatings did not. Model compound evidence in this work suggests that upon UVA irradiation, the N-Cl bond dissociates homolytically, followed by a Cl radical migration to the alkyl side chain connected to the siloxane tethering group. An alpha and/or beta scission then occurs causing partial loss of the biocidal moiety from the surface of the coated material, thus precluding complete rechlorination. NMR, FTIR, GCMS, and computations at the DFT (U)B3LYP/6-311++G(2d,p) level of theory have been employed in reaching this conclusion.

Antimicrobial modification of polyester by admicellar polymerization.

The N-halamine monomer 3-(4'-vinylbenzyl)-5,5-dimethylhydantoin (VBDMH) was synthesized and employed to form thin films on the surfaces of polyester fibers by surface polymerization with the aid of a cationic surfactant. The coated samples were characterized by FTIR and SEM. The thin film coatings could be rendered biocidal by exposure to dilute sodium hypochlorite. The antimicrobial polyesters were challenged with Staphylococcus aureus and Escherichia coli O157:H7. Complete inactivation of S. aureus and E. coli O157:H7 was observed within 10 and 30 min of contact time, respectively. The chlorine bonded to the coatings was very stable under standard washing tests and UVA irradiation tests, and much of the lost chlorine could be regenerated by rechlorination.

Why does Kevlar decompose, while Nomex does not, when treated with aqueous chlorine solutions?

Kevlar and Nomex are high-performance polymers which have wide varieties of applications in daily life. Recently, they have been proposed to be biocidal materials when reacted with household bleach (sodium hypochlorite solution) because they contain amide moieties which can be chlorinated to generate biocidal N-halamine functional groups. Although Nomex can be chlorinated without any significant decomposition, Kevlar decomposes under the same chlorination conditions. In this study, two mimics for each of the polymers were synthesized to simulate the carboxylate and diaminophenylene components of the materials. It was found that the p-diaminophenylene component of the Kevlar mimic is oxidized to a quinone-type structure upon treatment with hypochlorous acid, which then decomposes. However, such a mechanism for the Nomex mimic is not possible. In this paper, based upon these observations, a plausible answer will be provided to the title question.