Competing Mechanisms in Palladium-Catalyzed Alkoxycarbonylation of Styrene.

Palladium-catalyzed carbonylation is a versatile method for the synthesis of various aldehydes, esters, lactones, or lactams. Alkoxycarbonylation of alkenes with carbon monoxide and alcohol produces either saturated or unsaturated esters as a result of two distinct catalytic cycles. The existing literature presents an inconsistent account of the procedures favoring oxidative carbonylation products. In this study, we have monitored the intermediates featured in both catalytic cycles of the methoxycarbonylation of styrene PhCH=CH2 as a model substrate, including all short-lived intermediates, using mass spectrometry. Comparing the reaction kinetics of the intermediates in both cycles in the same reaction mixture shows that the reaction proceeding via alkoxy intermediate [PdII]-OR, which gives rise to the unsaturated product PhCH=CHCO2Me, is faster. However, with an advancing reaction time, the gradually changing reaction conditions begin to favor the catalytic cycle dominated by palladium hydride [PdII]-H and alkyl intermediates, affording the saturated products PhCH2CH2CO2Me and PhCH(CO2Me)CH3 preferentially. The role of the oxidant proved to be crucial: using p-benzoquinone results in a gradual decrease of the pH during the reaction, swaying the system from oxidative conditions toward the palladium hydride cycle. By contrast, copper(II) acetate as an oxidant guards the pH within the 5-7 range and facilitates the formation of the alkoxy palladium complex [PdII]-OR, which favors the oxidative reaction producing PhCH=CHCO2Me with high selectivity. Hence, it is the oxidant, rather than the catalyst, that controls the reaction outcome by a mechanistic switch. Unraveling these principles broadens the scope for developing alkoxycarbonylation reactions and their application in organic synthesis.

Non-enzymatic electrochemical determination of cholesterol in dairy products on boron-doped diamond electrode.

Determination of cholesterol in food matrices is essential for quality control concerning the health of consumers. Herein, a simple electrochemical approach for cholesterol quantitation in dairy products is evaluated. The newly developed differential pulse voltammetric method using acetonitrile-perchloric acid mixture as a supporting electrolyte is statistically compared to GC-MS and HPLC-UV. Oxidation signals of cholesterol at +1.5 V and +1.4 V (vs. Ag/AgNO3 in acetonitrile) provide detection limits of 4.9 µM and 6.1 µM on boron-doped diamond and glassy carbon electrodes, respectively. A simple liquid-liquid extraction procedure from dairy products into hexane resulted in a recovery rate of (74.8 ± 3.8)%. The method provides results in close agreement (at a 95% confidence level) with GC-MS, while HPLC-UV resulted in a significant difference in estimated cholesterol concentrations for all samples. This newly developed method is a simpler, faster and cheaper alternative to instrumentally demanding MS-based methods and clearly outperforms HPLC-UV.

Reductive Amination Revisited: Reduction of Aldimines with Trichlorosilane Catalyzed by Dimethylformamide─Functional Group Tolerance, Scope, and Limitations.

Aldimines, generated in situ from aliphatic, aromatic, and heteroaromatic aldehydes and aliphatic, aromatic, and heteroaromatic primary or secondary amines, can be reduced with trichlorosilane in the presence of dimethylformamide (DMF) as an organocatalyst (≤10 mol %) in toluene or CH2Cl2 at room temperature. The reduction tolerates ketone carbonyls, esters, amides, nitriles, sulfones, sulfonamides, NO2, SF5, and CF3 groups, boronic esters, azides, phosphine oxides, C═C and C≡C bonds, and ferrocenyl nucleus, but sulfoxides and N-oxides are reduced. α,ß-Unsaturated aldimines undergo 1,2-reduction only, leaving the C═C bond intact. N-Monoalkylation of primary amines is attained with a 1:1 aldehyde to amine ratio, whereas excess of the aldehyde (≥2:1) allows second alkylation, giving rise to tertiary amines. Reductive N-alkylation of α-amino acids proceeds without racemization; the resulting products, containing a C≡C bond or N3 group, are suitable for click chemistry. This reaction thus offers advantages over the traditional methods (borohydride reduction or catalytic hydrogenation) in terms of efficiency and chemoselectivity. Solubility of some of the reacting partners appears to be the only limitation. The byproducts generated by the workup with aqueous NaHCO3 (i.e., NaCl and silica) are environmentally benign. As a greener alternative, DMA can be employed as a catalyst instead of DMF.

Reaction Outcome Critically Dependent on the Method of Workup: An Example from the Synthesis of 1-Isoquinolones.

A striking dependence on the method of workup has been found for annulation of benzonitriles ArC≡N to N-methyl 2-toluamide (1), facilitated by n-BuLi (2 equiv): quenching the reaction by a slow addition of water produced the expected 1-isoquinolones 2; by contrast, slow pouring of the reaction mixture into water afforded the cyclic aminals 5 (retaining the NMe group of the original toluamide). The mechanism of the two processes is discussed in terms of the actual H+ concentration in the workup. Both 2 and 5 were then converted into the corresponding 1-chloroisoquinolines 3, coupling of which, mediated by (Ph3P)2NiCl2/Zn, afforded bis-isoquinolines 4.

Voltammetry of 7-dehydrocholesterol as a new and useful tool for Smith-Lemli-Opitz syndrome diagnosis.

7-Dehydrocholesterol is an essential biomarker of Smith-Lemli-Opitz syndrome, a congenital autosomal recessive disorder. This study shows for the first time that electrochemical oxidation of 7-dehydrocholesterol can be used for its voltammetric determination. Two classes of supporting electrolytes in acetonitrile and a mixture of acetonitrile-water were used: inorganic acids known to promote structural changes of steroids and indifferent electrolytes. Oxidation of 7-dehydrocholesterol at ca +0.8 V (vs. Ag/AgNO3 in acetonitrile) in 0.1 mol L-1 NaClO4 in acetonitrile is useful for its voltammetric detection using common bare electrode materials. Detection limits for 7-dehydrocholesterol lie in the low micromolar range for all the working electrodes, including boron-doped diamond (0.4 µmol L-1) and disposable thin-film platinum electrodes (0.5 µmol L-1), which are advantageous because of the low volumes of studied solutions. After Bligh-Dyer extraction, quantification of 7-dehydrocholesterol concentration (boron-doped diamond) or concentration range (thin-film platinum) is easily attainable in artificial serum. The mere knowledge of the concentration range provides clinically valuable information, as 7-dehydrocholesterol levels are employed for SLOS diagnosis as a binary criterion (elevated, tens to hundreds µmol L-1 in symptomatic/non-elevated, typically bellow 1 µmol L-1 in healthy individuals in plasma). Moreover, it is shown that 7-dehydrocholesterol (provitamin D3) and cholecalciferol (vitamin D3) can be oxidized in 0.1 mol L-1 HClO4 in acetonitrile. Under these conditions, their voltammetric response changes dramatically, and their oxidation potential difference transiently increases from 0.08 V to 0.25 V, which should facilitate their simultaneous voltammetric determination. This work constitutes a foundation for a reliable and straightforward method for Smith-Lemli-Opitz syndrome diagnosis and monitoring 7-dehydrocholesterol's biotransformation to cholecalciferol.

A novel voltammetric approach to the detection of primary bile acids in serum samples.

An innovative voltammetric approach to the detection of cholic and chenodeoxycholic acids is presented. These two primary bile acids are important biomarkers of liver function in humans and are involved in many physiological processes in the human body. Herein we describe a way to reproducibly convert the hard-to-detect bile acid molecule into an easily detectable derivative in situ using 0.1 M HClO4 in acetonitrile (water content 0.55%). Under these conditions the bile acids are dehydrated and the resulting alkenes can be subsequently oxidized electrochemically on polished boron-doped diamond electrode under unchanged conditions at approximately +1.2 V vs. Ag/AgNO3 in acetonitrile. After optimization, differential pulse voltammetry provides competitive limits of detection of 0.5 µM and 1.0 µM for cholic and chenodeoxycholic acid, respectively, with a linear course of calibration dependency to the minimum of 80 µM. The method was applied for detection of cholic and chenodeoxycholic acids in artificial and human serum samples using single solid phase extraction on C-18 cartridge for preliminary separation of the analytes. High recoveries of 80-90% were consistently obtained by the proposed voltammetric method and reference HPLC with fluorescence detection for human serum samples, confirming good selectivity for real-life samples.

A New Insight into the Stereoelectronic Control of the Pd0 -Catalyzed Allylic Substitution: Application for the Synthesis of Multisubstituted Pyran-2-ones via an Unusual 1,3-Transposition.

Pyran-2-ones 3 undergo a novel Pd0 -catalyzed 1,3-rearrangement to afford isomers 6. The reaction proceeds via an η2 -Pd complex, the pyramidalization of which (confirmed by quantum chemistry calculations) offers a favorable antiperiplanar alignment of the Pd-C and allylic C-O bonds (C), thus allowing the formation of an η3 -Pd intermediate. Subsequent rotation and rate-limiting recombination with the carboxylate arm then gives isomeric pyran-2-ones 6. The calculated free energies reproduce the observed kinetics semi-quantitatively.

Cross-Aldol Reaction of Isatin with Acetone Catalyzed by Leucinol: A Mechanistic Investigation.

Comprehensive mechanistic studies on the enantioselective aldol reaction between isatin (1 a) and acetone, catalyzed by L-leucinol (3 a), unraveled that isatin, apart from being a substrate, also plays an active catalytic role. Conversion of the intermediate oxazolidine 4 into the reactive syn-enamine 6, catalyzed by isatin, was identified as the rate-determining step by both the calculations (ΔG(≠) =26.1 kcal mol(-1) for the analogous L-alaninol, 3 b) and the kinetic isotope effect (kH /kD =2.7 observed for the reaction using [D6 ]acetone). The subsequent reaction of the syn-enamine 6 with isatin produces (S)-2 a (calculated ΔG(≠) =11.6 kcal mol(-1) ). The calculations suggest that the overall stereochemistry is controlled by two key events: 1) the isatin-catalyzed formation of the syn-enamine 6, which is thermodynamically favored over its anti-rotamer 7 by 2.3 kcal mol(-1) ; and 2) the high preference of the syn-enamine 6 to produce (S)-2 a on reaction with isatin (1 a) rather than its enantiomer (ΔΔG(≠) =2.6 kcal mol(-1) ).

The syn/anti-dichotomy in the palladium-catalyzed addition of nucleophiles to alkenes.

In this review the stereochemistry of palladium-catalyzed addition of nucleophiles to alkenes is discussed, and examples of these reactions in organic synthesis are given. Most of the reactions discussed involve oxygen and nitrogen nucleophiles; the Wacker oxidation of ethylene has been reviewed in detail. An anti-hydroxypalladation in the Wacker oxidation has strong support from both experimental and computational studies. From the reviewed material it is clear that anti-addition of oxygen and nitrogen nucleophiles is strongly favored in intermolecular addition to olefin-palladium complexes even if the nucleophile is coordinated to the metal. On the other hand, syn-addition is common in the case of intramolecular oxy- and amidopalladation as a result of the initial coordination of the internal nucleophile to the metal.

Palladium-catalyzed alkoxycarbonylation of terminal alkenes to produce α,ß-unsaturated esters: the key role of acetonitrile as a ligand.

A mild protocol has been developed for the Pd(II)-catalyzed alkoxycarbonylation of terminal olefins to produce α,ß-unsaturated esters with a wide range of substrates. Key features are the use of MeCN as solvent (and/or ligand) to control the reactivity of the intermediate Pd complexes and the combination of CO with O2, which facilitates the Cu(II)-mediated reoxidation of the Pd(0) complex to Pd(II) and prevents double carbonylation.

Palladium-catalyzed stereoselective intramolecular oxidative amidation of alkenes in the synthesis of 1,3- and 1,4-amino alcohols and 1,3-diamines.

An efficient and practical Pd-catalyzed intramolecular oxidative allylic amidation provides facile access to derivatives of 1,3- and 1,4-amino alcohols and 1,3-diamines. The method operates under mild reaction conditions (RT) with molecular oxygen (1 atm) as the sole reoxidant of Pd. Excellent diastereoselectivities were attained with substrates bearing a secondary stereogenic center.

Mechanistic dichotomy in the asymmetric allylation of aldehydes with allyltrichlorosilanes catalyzed by chiral pyridine N-oxides.

Detailed kinetic and computational investigation of the enantio- and diastereoselective allylation of aldehydes 1 with allyltrichlorosilanes 5, employing the pyridine N-oxides METHOX (9) and QUINOX (10) as chiral organocatalysts, indicate that the reaction can proceed through a dissociative (cationic) or associative (neutral) mechanism: METHOX apparently favors a pentacoordinate cationic transition state, while the less sterically demanding QUINOX is likely to operate via a hexacoordinate neutral complex. In both pathways, only one molecule of the catalyst is involved in the rate- and selectivity-determining step, which is supported by both experimental and computational data.

Catalyst development for organocatalytic hydrosilylation of aromatic ketones and ketimines.

A new family of Lewis basic 2-pyridyl oxazolines have been developed, which can act as efficient organocatalysts for the enantioselective reduction of prochiral aromatic ketones and ketimines with trichlorosilane, a readily available and inexpensive reagent. 1-Isoquinolyl oxazoline, derived from mandelic acid, was identified as the most efficient catalyst of the series, capable of delivering high enantioselectivities in the reduction of both ketones (up to 94% ee) and ketimines (up to 89% ee).

Stereoselective palladium-catalyzed functionalization of homoallylic alcohols: a convenient synthesis of di- and trisubstituted isoxazolidines and ß-amino-δ-hydroxy esters.

Enantiopure, Boc-protected alkoxyamines 12 and 13, derived from the readily available homoallylic alcohols 4 via a reaction that involves either inversion or retention of configuration, undergo a diastereoselective Pd-catalyzed ring-closing carbonylative amidation to produce isoxazolidines 16/17 (≤50:1 diastereoisomer ratio (d.r.)) that can be readily converted into the N-Boc-protected esters of ß-amino-δ-hydroxy acids and their γ-substituted homologues 37. The key carbonylative cyclization proceeds through an unusual syn addition of the palladium and the nitrogen nucleophile across the C=C bond (19→21), as revealed by the reaction of 15, which afforded isoxazolidine 18 with high diastereoselectivity.

A modular approach to aryl-C-ribonucleosides via the allylic substitution and ring-closing metathesis sequence. a stereocontrolled synthesis of all four α-/ß- and D-/L-C-nucleoside stereoisomers.

Iridium(I)-catalyzed allylation of the enantiopure monoprotected copper(I) alkoxide, generated from (S)-5a, with the enantiopure allylic carbonates (R)-9a,b has been developed as the key step in a new approach to C-nucleoside analogues. The anomeric center was thus constructed via a stereocontrolled formation of the C-O rather than C-C bond with retention of configuration. The resulting bisallyl ethers 15a,b (≥90% de and >99% ee) were converted into C-ribosides 29a,b via the Ru-catalyzed ring-closing metathesis, followed by a diastereoselective dihydroxylation catalyzed by OsO(4) or RuO(4) and deprotection. Variation of the absolute configuration of the starting segments 5a and 9a,b allowed a stereocontrolled synthesis of all four α/ß-D/L-combinations.

Mapping lipid and detergent molecules at the surface of membrane proteins.

Electron-density maps for the crystal structures of membrane proteins often show features suggesting binding of lipids and/or detergent molecules on the hydrophobic surface, but usually it is difficult to identify the bound molecules. In our studies, heavy-atom-labelled phospholipids and detergents have been used to unequivocally identify these binding sites at the surfaces of test membrane proteins, the reaction centres from Rhodobacter sphaeroides and Blastochloris viridis. The generality of this method is discussed in the present article.

Enantioselective allylation of α,ß-unsaturated aldehydes with allyltrichlorosilane catalyzed by METHOX.

α,ß-Unsaturated aldehydes 6a-j undergo an enantioselective allylation with allylic trichlorosilanes 2a,b in the presence of METHOX (4) as a Lewis basic catalyst (≤10 mol %) to produce the homoallylic alcohols 7a-l at good to high enantioselectivity (83-96% ee). This study shows that the reactivity scope of METHOX can be extended from aromatic to nonaromatic aldehydes.

Dendron-anchored organocatalysts: the asymmetric reduction of imines with trichlorosilane, catalysed by an amino acid-derived formamide appended to a dendron.

Asymmetric reduction of ketimines with trichlorosilane can be catalysed by the Lewis-basic N-methylvaline-derived formamide anchored to a soluble dendron () with good enantioselectivity (

Weak intra- and intermolecular interactions in a binaphthol imine: an experimental charge-density study on (+/-)-8'-benzhydrylideneamino-1,1'-binaphthyl-2-ol.

The charge density in (+/-)-8'-benzhydrylideneamino-1,1'-binaphthyl-2-ol (1) has been studied experimentally using Mo Kalpha X-ray diffraction at 100 K, and by theory using density-functional thoery (DFT) calculations at the B3LYP/6-311++G** level. The nature of the weak intramolecular peri-C...N, CH...pi, H...H and C(pi)...C(pi) interactions has been examined by topological analysis using the Quantum Theory of Atoms in Molecules (QTAIM) approach. An analysis of the density rho(r), the Laplacian of the density inverted Delta(2)rho(r(b)) and other topological properties at the bond-critical points were used to classify these interactions. The study confirms the presence of the intramolecular CH...pi interaction in (1), which was previously suspected on geometrical grounds. An analysis of the ellipticity profiles along the bond paths unambiguously shows the pi-delocalization between the imine unit and one N-phenyl group. The weak intermolecular interactions in the crystal of (1) were examined experimentally and theoretically through the pairwise interactions of the seven independent dimeric pairs of (1) responsible for the set of unique intermolecular interactions, and also through examination of the Hirshfeld surface d(norm) property. The theoretical dimeric-pair calculations used the BLYP-D functional which supplements the exchange-correlational functional with an empirical dispersion term to provide a more accurate determination of the energies for the weak intermolecular interactions.