RESUMEN
It is essential to understand the nanoscale structure and chemistry of energy storage materials due to their profound impact on battery performance. However, it is often challenging to characterize them at high resolution, as they are often fundamentally altered by sample preparation methods. Here, we use the cryogenic lift-out technique in a plasma-focused ion beam (PFIB)/scanning electron microscope (SEM) to prepare air-sensitive lithium metal to understand ion-beam damage during sample preparation. Through the use of cryogenic transmission electron microscopy, we find that lithium was not damaged by ion-beam milling although lithium oxide shells form in the PFIB/SEM chamber, as evidenced by diffraction information from cryogenic lift-out lithium lamellae prepared at two different thicknesses (130 and 225 nm). Cryogenic energy loss spectroscopy further confirms that lithium was oxidized during the process of sample preparation. The Ellingham diagram suggests that lithium can react with trace oxygen gas in the FIB/SEM chamber at cryogenic temperatures, and we show that liquid oxygen does not contribute to the oxidation of lithium process. Our results suggest the importance of understanding how cryogenic lift-out sample preparation has an impact on the high-resolution characterization of reactive battery materials.
RESUMEN
Skin-attachable gas sensors provide a next-generation wearable platform for real-time protection of human health by monitoring environmental and physiological chemicals. However, the creation of skin-like wearable gas sensors, possessing high sensitivity, selectivity, stability, and scalability (4S) simultaneously, has been a big challenge. Here, an ionotronic gas-sensing sticker (IGS) is demonstrated, implemented with free-standing polymer electrolyte (ionic thermoplastic polyurethane, i-TPU) as a sensing channel and inkjet-printed stretchable carbon nanotube electrodes, which enables the IGS to exhibit high sensitivity, selectivity, stability (against mechanical stress, humidity, and temperature), and scalable fabrication, simultaneously. The IGS demonstrates reliable sensing capability against nitrogen dioxide molecules under not only harsh mechanical stress (cyclic bending with the radius of curvature of 1 mm and cyclic straining at 50%), but also environmental conditions (thermal aging from -45 to 125 °C for 1000 cycles and humidity aging for 24 h at 85% relative humidity). Further, through systematic experiments and theoretical calculations, a π-hole receptor mechanism is proposed, which can effectively elucidate the origin of the high sensitivity (up to parts per billion level) and selectivity of the ionotronic sensing system. Consequently, this work provides a guideline for the design of ionotronic materials for the achievement of high-performance and skin-attachable gas-sensor platforms.
Asunto(s)
Gases/análisis , Fenómenos Mecánicos , Piel , Dispositivos Electrónicos Vestibles , HumanosRESUMEN
The fabrication of p-n heterostructures of a metal oxide semiconductor (MOS) showed that a large amount of heterojunction interfaces is one of the key issues in MOS gas sensor research, since it could significantly enhance the sensing performance. Despite considerable progress in this area, fabrication of an ideal p-n heterojunction sensing channel has been challenging because of morphological limitations of synthetic methods in the conventional bottom-up fabrication based on precursor reductions. In this study, a 10 nm scale p-n heterojunction nanochannel was fabricated with ultrasmall grained WO3/CuO nanopatterns in a large area (centimeter scale) through unique one-step top-down lithographic approaches. The fabricated p-n heterostructure nanochannel showed ultrathinness (20 nm thickness) and high aspect ratio (>10) and consisted of highly dispersed p-type dopants and n-type channel materials. This facile heterojunction nanostructure could induce a high degree of extended depletion layer and efficient catalytic properties within its single-nanochannel surfaces. Accordingly, the WO3/CuO nanochannel exhibited ultrasensitive detection performance toward ethanol (C2H5OH) ( Ra/ Rg = 224 at100 ppb), 12 times higher than that of a pristine WO3 nanochannel. The limit of detection of the sensors was calculated to be below parts per billion levels (0.094 ppb) with significant response amplitudes ( Ra/ Rg = 75), which is the best ethanol-sensing performance among previously reported MOS-based sensors. Our unique lithographic approach for the p-n heterojunction nanochannel is expected to be universally applicable to various heteronanostructures such as the n-n junction, p-p junction, and metal-semiconductor junction without combinatorial limitations.
RESUMEN
Gas molecules are known to interact with two-dimensional (2D) materials through surface adsorption where the adsorption-induced charge transfer governs the chemiresistive sensing of various gases. Recently, titanium carbide (Ti3C2T x) MXene emerged as a promising sensing channel showing the highest sensitivity among 2D materials and unique gas selectivity. However, unlike conventional 2D materials, MXenes show metallic conductivity and contain interlayer water, implying that gas molecules will likely interact in a more complex way than the typical charge transfer model. Therefore, it is important to understand the role of all factors that may influence gas sensing. Here, we studied the gas-induced interlayer swelling of Ti3C2T x MXene thin films and its influence on gas sensing performance. In situ X-ray diffraction was employed to simultaneously measure dynamic swelling behavior where Ti3C2T x MXene films displayed selective swelling toward ethanol vapor over CO2 gas. Results show that the controlling sodium ion concentration in the interlayers is highly important in tuning the swelling behavior and gas sensing performance. The degree of swelling matched well with the gas response intensity, and the highest gas selectivity toward ethanol vapor was achieved for Ti3C2T x sensing channels treated with 0.3 mM NaOH, which also displayed the largest amount of swelling. Our results demonstrate that controlling the interlayer transport of Ti3C2T x MXene is essential for enhancing the selective sensing of gas molecules.
Asunto(s)
Técnicas de Química Analítica/instrumentación , Gases/análisis , Elementos de Transición/química , Difracción de Rayos X , Modelos Moleculares , Conformación MolecularRESUMEN
With growing focus on the use of carbon nanomaterials in chemical sensors, one-dimensional graphene nanoribbon (GNR) has become one of the most attractive channel materials, owing to its enhanced conductance fluctuation by quantum confinement effects and dense, abundant edge sites. Due to the narrow width of a basal plane with one-dimensional morphology, chemical modification of edge sites would greatly affect the electrical channel properties of a GNR. Here, we demonstrate for the first time that chemically functionalizing the edge sites with aminopropylsilane (APS) molecules can significantly enhance the sensing performance of the GNR sensor. The resulting APS-functionalized GNR has a sensitivity ((Δ R/ Rb)max) of â¼30% at 0.125 ppm nitrogen dioxide (NO2) and an ultrafast response time (â¼6 s), which are, respectively, 7- and 15-fold enhancements compared to a pristine GNR sensor. This is the fastest and most sensitive gas-sensing performance of all GNR sensors reported. To demonstrate the superiority of the GNR-APS sensor, we compare its sensing performance with that of APS-functionalized carbon nanotube (CNT) and reduced graphene oxide (rGO) sensors prepared in identical synthesis conditions. Very interestingly, the GNR-APS sensor exhibited 30- and 93-fold enhanced sensitivity compared to the CNT-APS and rGO-APS sensors. This might be attributed to highly active edge sites with superior chemical reactivity, which are not present in CNT and rGO materials. Density functional theory clearly shows that the greatly enhanced gas response of GNR with edge functionalization can be attributed to the higher electron densities in the highest occupied molecular orbital levels of GNR-APS and incorporation of additional adsorption sites. This finding is the first demonstration of the importance of edge functionalization of GNR for chemical sensors.
RESUMEN
Ultrastable sensing characteristics of the ionic chemiresistor skin (ICS) that is designed by using an intrinsically stretchable thermoplastic polyurethane electrolyte as a volatile organic compound (VOC) sensing channel are described. The hierarchically assembled polymer electrolyte film is observed to be very uniform, transparent, and intrinsically stretchable. Systematic experimental and theoretical studies also reveal that artificial ions are evenly distributed in polyurethane matrix without microscale phase separation, which is essential for implementing high reliability of the ICS devices. The ICS displays highly sensitive and stable sensing of representative VOCs (including toluene, hexane, propanal, ethanol, and acetone) that are found in the exhaled breath of lung cancer patients. In particular, the sensor is found to be fully operational even after being subjected to long-term storage or harsh environmental conditions (relative humidity of 85% or temperature of 100 °C) or severe mechanical deformation (bending to a radius of curvature of 1 mm, or stretching strain of 100%), which can be an effective method to realize a human-adaptive and skin-attachable biosensor platform for daily use and early diagnosis.
RESUMEN
Achieving high sensitivity in solid-state gas sensors can allow the precise detection of chemical agents. In particular, detection of volatile organic compounds (VOCs) at the parts per billion (ppb) level is critical for the early diagnosis of diseases. To obtain high sensitivity, two requirements need to be simultaneously satisfied: (i) low electrical noise and (ii) strong signal, which existing sensor materials cannot meet. Here, we demonstrate that 2D metal carbide MXenes, which possess high metallic conductivity for low noise and a fully functionalized surface for a strong signal, greatly outperform the sensitivity of conventional semiconductor channel materials. Ti3C2Tx MXene gas sensors exhibited a very low limit of detection of 50-100 ppb for VOC gases at room temperature. Also, the extremely low noise led to a signal-to-noise ratio 2 orders of magnitude higher than that of other 2D materials, surpassing the best sensors known. Our results provide insight in utilizing highly functionalized metallic sensing channels for developing highly sensitive sensors.
RESUMEN
Controlling the charge concentrations of two-dimensional (2D) materials is a critical requirement for realizing versatility and potential application of these materials in high-performance electronics and sensors. In order to exploit the novel chemical-sensing characteristics of 2D materials for sensitive and selective sensors, various functionalization methods are needed to ensure efficient doping of channels based on 2D materials. In the present study, the gas-sensing performance of MoS2 has been significantly enhanced by controlled Au nanoparticle functionalization. By using the difference in reduction potential between the Au precursor and MoS2 work functions, MoS2 prepared by chemical exfoliation process was decorated with nanoparticles with sizes of tens of nanometers. The n-doping effect of Au nanoparticles was observed, that is, these particles were found to have facilitated in electron charge transfer from Au to MoS2. The controlled n-doping effect enables the tuning of the sensing of hydrocarbon-based volatile organic compounds (VOCs) and oxygen-functionalized compounds by MoS2. A significant step has therefore been made with this study toward solving the limitations imposed by previous MoS2-based sensors, which mostly produce a single response to various VOC analytes. This controllable chemical doping process for tuning the VOC-sensing performance of MoS2 can eventually be used in early detection using multichannel sensing systems that have different responses and recognize patterns for target analytes.
RESUMEN
Superior chemical sensing performance of black phosphorus (BP) is demonstrated by comparison with MoS2 and graphene. Dynamic sensing measurements of multichannel detection show that BP displays highly sensitive, selective, and fast-responsive NO2 sensing performance compared to the other representative 2D sensing materials.