Evaluation of Cookies Enriched with Osmodehydrated Wild Garlic from Nutritional and Sensory Aspects.

In the present study, the nutritional and sensory properties of spelt cookies without wild garlic, cookies with fresh wild garlic, cookies with osmodehydrated wild garlic in sugar beet molasses, and cookies with osmodehydrated wild garlic in an aqueous solution of sucrose and salt were evaluated and compared. The tested cookie samples were characterized in terms of total antioxidative activity, the total content of phenols, flavonoids, and thiosulfates, the presence of dominant phenols, the content of betaine and dietary fiber, antioxidant activity after in vitro digestion, and sensory attributes for appearance, taste, smell, and texture. The results proved that the addition of wild garlic leaves osmodehydrated in molasses provided the cookies with the best nutritional and bioactive properties: 1.75 times higher total phenols content, 2.4 times higher total flavonoids content, 1.52 times higher total thiosulfates content, and 1.56 times higher betaine content, and a total quality increase of 54% compared to the control cookies. The cookies enriched with osmodehydrated wild garlic in molasses were rated as pleasant and acceptable, but also more complex compared to other cookies. The production of this nutritionally and sensory-improved cookie would contribute to expanding the assortment of flour confectionery products, especially for consumers who care about health and nutrition.

Chemical Characterization of 29 Industrial Hempseed (Cannabis sativa L.) Varieties.

Hemp is considered one of the potential novel crops for human and animal nutrition. This study aimed to determine the complete chemical composition of 29 different varieties of whole hempseeds. Fatty acid composition, amino acid profile, mineral composition, and cannabinoids content were also evaluated. All hempseed varieties were milled to obtain whole hempseed flour. Differences between hempseed varieties were significant (p < 0.05) for all measured parameters. Proximate composition results showed that crude protein and fat contents varied from 21.6-28.9% and 21.1-35.7%, respectively. Fatty acid profiles revealed that the three major fatty acids were linoleic acid (52.79-57.13%) followed by α-linolenic acid (12.62-20.24%), and oleic acid (11.08-17.81%). All essential amino acids were detected in all varieties, with arginine (12.66-17.56 mg/100 g protein) present in abundance, whereas lysine was limiting. Substantial differences were found in the mineral content, and potassium (509.96-1182.65 mg/100 g) and iron (5.06-32.37 mg/100 mg) were the main macro- and microminerals found. All cannabinoids were found in small traces and tetrahydrocannabidiol (THC) was only detected in five varieties. To conclude, the nutritional composition of hempseeds with hull makes them suitable to be added into the diets of humans or animals as a highly beneficial novel ingredient.

Wild Garlic (Allium ursinum) Preparations in the Design of Novel Functional Pasta.

This study investigated the design of novel pasta enriched with different forms of wild garlic (WG): a powder, an extract and an encapsulated extract applied at three enrichment levels (low/middle/high). The effect of cooking on changes in the content of bioactive compounds, antioxidative activity, cooking behaviour, texture, colour and sensory properties of the cooked pasta was evaluated. WG preparations significantly increased the antioxidant potential (by 185-600%) as well as the content of phenolics (by 26-146%), flavonoids (by 40-360%) and potassium (up to three-fold) in the cooked pasta, depending on WG type and enrichment level. Flavonoids were dominantly present in the free form. Cooking resulted in a significant loss of flavonoids (39-75%) whereas phenolics were liberated from the matrix. The highest increase in total phenolics and antioxidant activity was exerted by the WG powder and extract. Pasta hardness and adhesiveness were increased, but encapsulated WG deteriorated cooking behaviour. The best-scored enriched pasta regarding sensory quality and texture was that enriched with WG powder at the low/moderate level.

Influence of Infill Level and Post-Processing on Physical Parameters and Betaine Content of Enriched 3D-Printed Sweet Snacks.

Betaine is a non-essential amino acid with proven functional properties and untapped potential for cereal food enrichment. While 3D printing represents a viable approach for manufacturing enriched cereal-based foods with novel shapes and textures, it is crucial to consider the impact of printing parameters and post-processing on the betaine content and properties of these products. The aim of this study was to investigate the influence of the infill level (20, 30 and 40%) of 3D-printed cuboid shapes and the post-processing techniques (drying oven, vacuum dryer, air fryer) of betaine-enriched oat-based snacks on the print quality, texture, and sensory properties, as well as the content of preserved betaine. The interaction of post-processing technique and infill level influenced the length deviation and texture properties, as well as the betaine content of snacks. Height stability was only influenced by post-processing technique. In general, oven-dried snacks showed the best dimensional stability, having the lowest width/length deformation (about 8%) at the infill level of 20%. Betaine was best preserved (19-31% loss) in snacks post-processed in a vacuum dryer (1281-1497 mg/g), followed by an air fryer and a drying oven, where betaine loss was in the range 28-55%. Air-fried snacks with 40% infill level had the highest values of instrumentally measured crunchiness (38.9 Nmm) as well as sensory test values for liking of texture (7.5), intensity of odor (6) and overall flavor (6). Overall, air frying proved to be a convenient and quick post-processing technique for 3D-printed snacks, but infill patterns for preserving betaine should be further explored. Vacuum drying could be used to preserve bioactive compounds, but efforts should be made to minimize its negative impact on the physical deformations of the 3D-printed products.

Betaine as a Functional Ingredient: Metabolism, Health-Promoting Attributes, Food Sources, Applications and Analysis Methods.

Betaine is a non-essential amino acid with proven functional properties and underutilized potential. The most common dietary sources of betaine are beets, spinach, and whole grains. Whole grains-such as quinoa, wheat and oat brans, brown rice, barley, etc.-are generally considered rich sources of betaine. This valuable compound has gained popularity as an ingredient in novel and functional foods due to the demonstrated health benefits that it may provide. This review study will provide an overview of the various natural sources of betaine, including different types of food products, and explore the potential of betaine as an innovative functional ingredient. It will thoroughly discuss its metabolic pathways and physiology, disease-preventing and health-promoting properties, and further highlight the extraction procedures and detection methods in different matrices. In addition, gaps in the existing scientific literature will be emphasized.

Sour Cherry Pomace Valorization as a Bakery Fruit Filling: Chemical Composition, Bioactivity, Quality and Sensory Properties.

Sour cherry pomace filling (SCPF) and commercial sour cherry filling (CSCF) produced on a semi-industrial scale were tested and compared in terms of food safety, chemical composition, bioactivity, quality, sensory properties and thermal stability. Both samples were safe for human consumption, thermally stable and there was a lack of syneresis. SCPF had a significantly higher fiber concentration (3.79 g/100 g) due to higher skin fraction and is considered a "source of fibers". The higher skin fraction in SCPF also resulted in a higher mineral quantity (Fe-3.83 mg/kg fw) in comparison to CSCF (Fe-2.87 mg/kg fw). Anthocyanins concentration was lower in SCPF (7.58 mg CGE/100 g fw), suggesting that a significant amount of anthocyanins was removed from SC skin during juice extraction. However, there was a lack of statistical differences in antioxidant activity between the two fillings. CSCF was more spreadable, not as firm and less sticky, with lower storage and loss modulus values than SCPF. However, both fillings exhibited acceptable rheological and textural behaviour for fruit fillings. According to the consumer pastry test, 28 participants preferred each pastry; thus, there was a lack of preference toward any of the tested samples. SCP could be used as a raw material for the bakery fruit fillings industry, which leads to the valorization of food industry by-products.

Analysis of antioxidant potential of fruit and vegetable juices available in Serbian markets.

Antioxidants in fruit and vegetable juices have become increasingly popular because of their potential health benefits. Nowadays, juice mixes made from berries present frequent consumer choices, due to their nutritive value and high content of bioactive compounds. Commercial fruit and vegetable juices available in Serbian markets (n = 32) were analyzed for the physicochemical properties, chemical composition, and antioxidant activity. Relative antioxidant capacity index was used for the ranking of the juices according to antioxidant capacity, while antioxidant effectiveness of phenolic compounds contained in juice samples was investigated depending on phenolic antioxidant coefficients. Principal component analysis was applied to study the data structure. In addition, a multi-layer perceptron model was used for modeling an artificial neural network model (ANN) for prediction antioxidant activity (DPPH, reducing power, and ABTS) based on total phenolic, total pigments, and vitamin C content. The obtained ANN showed good prediction capabilities (the r2 values during training cycle for output variables were 0.942). Phenolic, pigments, and vitamin C contents showed a positive correlation with the investigated antioxidant activity. The consumption of commercial berry fruit juices available in Serbian markets may deliver great health benefits through the supply of natural antioxidants.

Effect of Beetroot Powder Incorporation on Functional Properties and Shelf Life of Biscuits.

The demand for ready-to-use functional foods is high, which encourages manufacturers to develop new, nutritionally valuable products. As an excellent source of biologically active compounds, beetroot (Beta vulgaris L.) is considered to have highly beneficial effects on health. This research aimed to evaluate the impact of replacing spelt flour (SF) with 15%, 20% and 25% beetroot powder (BP). The physicochemical and functional properties of biscuits baked at different temperatures (150 and 170 °C) were followed at the beginning, and after 3 and 6 months of storage as standard conditions. Moisture content and water activity (aw) gave insight into the biscuits' shelf life. The value of aw from 0.35 to 0.56 indicated appropriate storability. Dietary fiber content in fresh biscuits ranged from 6.1% to 7.6%, protein from 9.2% to 8.9% and sugar from 30.6% to 35.9%. The content of betalain, total polyphenols and flavonoids, and antioxidant activity (DPPH, FRAP) increased with beetroot powder content incorporated. A slight decrease of all the mentioned parameters during the storage indicated satisfied retention of bioactive molecules. The content of prevalent phenolic compounds gallic and protocatechuic acid, identified by HPLC, decreased from 22.2-32.0 and 21.1-24.9 in fresh biscuits to 18.3-23.4 and 17.3-20.3 mg/100 g upon six months of storage, respectively. An increase of the L* and a* and a decrease of the b* coordinate values, compared with the control sample without beetroot values, was noticed as well as the expected level of their change during the storage. The obtained results indicated that biscuits enriched with beetroot powder showed a significantly improved functional, nutritional and antioxidant potential during storage.

Bioactive, Mineral and Antioxidative Properties of Gluten-Free Chicory Supplemented Snack: Impact of Processing Conditions.

This study aimed to investigate the impact of chicory root addition (20-40%) and extrusion conditions (moisture content from 16.3 to 22.5%, and screw speed from 500 to 900 rpm) on bioactive compounds content (inulin, sesquiterpene lactones, and polyphenols) of gluten-free rice snacks. Chicory root is considered a potential carrier of food bioactives, while extrusion may produce a wide range of functional snack products. The mineral profiles were determined in all of the obtained extrudates in terms of Na, K, Ca, Mg, Fe, Mn, Zn, and Cu contents, while antioxidative activity was established through reducing capacity, DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) tests. Chicory root addition contributed to the improvement of bioactive compounds and mineral contents, as well as antioxidative activities in all of the investigated extrudates in comparison to the pure-rice control sample. An increase in moisture content raised sesquiterpene lactones and minerals, while high screw speeds positively affected polyphenols content. The achieved results showed the important impact of the extrusion conditions on the investigated parameters and promoted chicory root as an attractive food ingredient in gluten-free snack products with high bioactive value.

Physicochemical Changes of Heat-Treated Corn Grain Used in Ruminant Nutrition.

Cereal grain is processed using different combinations of heat, moisture, time, and mechanical action in order to improve its digestibility. The objective of the present research was to quantitatively represent the physicochemical properties of raw and processed starch using an in vitro methodology, as well as to describe the changes that occurred after heat treatment, such as pelleting, steam flaking, micronization, and extrusion of corn. Based on the obtained results, pelleting, steam flaking, and micronization can be considered as mild heat treatment methods, whereas extrusion proved to be a severe heat treatment method. Analysis of functional and pasting properties implied a possible interaction between the degraded components in the steam-flaked sample, as well as in the micronized sample, through to a lesser extent. Additionally, the occurrence of dextrins was noted after extrusion. The obtained results indicate the existence of significant differences in the physicochemical properties of corn starch depending on the heat treatment applied, which could possibly affect rumen starch degradation traits.

Development of a Novel Rice-Based Snack Enriched with Chicory Root: Physicochemical and Sensory Properties.

A novel rice-based snack enriched with chicory root flour (CRF) was developed by twin-screw extrusion. Chicory (Cichorium intybus L.) is one of the promising medicinal plants for the development of innovative food and may be considered a functional food ingredient. Central composite design (CCD) was employed to generate snack formulations by varying feed moisture (M, 16.3-22.5%), screw speed (SS, 500-900 rpm) and CRF content (20-40%). The optimization according to artificial neural network modeling and a genetic algorithm was applied to define optimal process conditions (17.6% moisture, 820 rpm and 24.1% of CRF) for obtaining the product with the highest expansion (3.34), crispiness (3.22 × 10-3), volume (2040 m3), degree of gelatinization (69.70%) and good color properties. Bulk density (110.33 g/L), density (250 kg/m3), and hardness (98.74 N) resulted in low values for the optimal sample. The descriptive sensory analysis evaluated low hardness and bitterness, with high crispiness for the optimal extrudate. This study points to the possibility of a novel chicory enriched extrudate production with desirable physicochemical and sensory properties.

Bioprocessing of Wheat and Amaranth Bran for the Reduction of Fructan Levels and Application in 3D-Printed Snacks.

Bran can enrich snacks with dietary fibre but contains fructans that trigger symptoms in people with irritable bowel syndrome (IBS). This study aimed to investigate the bioprocessing of wheat and amaranth bran for degrading fructans and its application (at 20% flour-based) in 3D-printed snacks. Bran was bioprocessed with Saccharomyces cerevisiae alone or combined with inulinase, Kluyveromyces marxianus, Limosilactobacillus fermentum, or commercial starter LV1 for 24 h. Fructans, fructose, glucose, and mannitol in the bran were analysed enzymatically. Dough rheology, snack printing precision, shrinkage in baking, texture, colour, and sensory attributes were determined. The fructan content of wheat bran was 2.64% dry weight, and in amaranth bran, it was 0.96% dry weight. Bioprocessing reduced fructan content (up to 93%) depending on the bran type and bioprocessing agent, while fructose and mannitol remained below the cut-off value for IBS patients. Bran bioprocessing increased the complex viscosity and yield stress of dough (by up to 43 and 183%, respectively) in addition to printing precision (by up to 13%), while it lessened shrinkage in baking (by 20-69%) and the hardness of the snacks (by 20%). The intensity of snack sensory attributes depended on the bran type and bioprocessing agent, but the liking ("neither like nor dislike") was similar between samples. In conclusion, snacks can be enriched with fibre while remaining low in fructans by applying bioprocessed wheat or amaranth bran and 3D printing.

Quality and Sensory Profile of Durum Wheat Pasta Enriched with Carrot Waste Encapsulates.

Consumer knowledge about pasta quality differs around the world. Modern consumers are more sophisticated compared to past times, due to the availability of information on pasta types and quality. Therefore, this study investigated the nutritional, physical, textural, and morphological quality of durum wheat pasta enriched with carrot waste encapsulates (10 and 20% freeze-dried encapsulate (FDE) and 10 and 20% spray-dried encapsulate (SDE)), as well as determining consumer preferences for this type of product. Replacement of semolina with FDE and SDE contributed to changes in the pasta nutritional quality, which was reflected in the increased protein, fat, and ash content. Additionally, changes in cooking quality, color, and texture were within satisfactory limits. The uncooked pasta enriched with 10 and 20% SDE was characterized by a lighter yellow intensity with color saturation, as well as an imperceptible waxy appearance compared to the control and enriched pasta with 10 and 20% FDE. After cooking, the yellow color was more intense in all the enriched pasta samples which can be linked to the raw cereal which was significantly greater in the control in comparison to the FDE and SDE containing samples. Overall, carrot waste can be a promising material for the food industry to produce high-quality pasta.

Textural, Color and Sensory Features of Spelt Wholegrain Snack Enriched with Betaine.

The influence of different extrusion parameters, including screw speed (250-750 rpm), feed rate (15-25 kg/h) and feed moisture content (15-25%), on the textural and color properties of spelt wholegrain snack products produced on a co-rotating twin-screw extruder with added betaine was investigated. In order to determine the relative influence of input variables in the artificial neural network (ANN) model, Yoon's interpretation method was used, and it was concluded that feed moisture content has the greatest influence on L* values, while screw speed has the greatest influence on a* and b* values. The softest samples were obtained at the lowest moisture content. Sensory analysis was carried out on selected samples, and it showed that betaine addition did not intensify the bitter taste. The sample with the largest expansion exhibited the lowest hardness and chewiness before and after immersion in milk, and this sample is the most suitable for enrichment with betaine.

Kinetic modelling of ultrasound-assisted extraction of phenolics from cereal brans.

Cereal brans are by-products of the milling of cereal grains, which are mainly used as low value ingredients in animal feed. Wheat and oat bran is a rich source of bioactives and phytochemicals, especially phenolic compounds. Within this study, the application of ultrasound (US) technology to assist the extraction of phenolics from oat and wheat bran was investigated (20-45 kHz). Peleg's mathematical model was used to study the kinetics of ultrasound-assisted extraction (UAE) and subsequent stirring of total phenolic compounds (TPC). The surface morphology of cereal brans after extraction was studied using SEM analysis. The excellent agreement was determined between the values of TPC calculated from Peleg's mathematical model and actual experimental results. The constant that represents a time required for the initial phenolic concentration to be extracted to one-half of its initial value has been introduced (K1/2). It was shown that the TPC extraction kinetics was dependent only on K1/2 enabling fast kinetics fitting and comparison between extraction rates. Moreover, different values of K1/2 constant could indicate the differences in brans composition and consequently different influence of US pretreatment on these samples.

Chicory (Cichorium intybus L.) as a food ingredient - Nutritional composition, bioactivity, safety, and health claims: A review.

Chicory (Cichorium intybus L.) is a perennial herb from the Cichorium genus, Asteraceae family, and is worldwide cultivated. So far, chicory has been used mainly in animal feed, but also in several cases in the food industry: as salad, for teas and tea blends, for coffee supplementation, and as a source for the inulin production. Nowadays there is an increasing interest in chicory utilization for food production and supplementation. Some compounds present in chicory, such as polyphenols, inulin, oligofructose and sesquiterpene lactones may be considered as potential carriers of food functionality. This review describes nutritional, mineral and bioactive composition of the chicory plant and summarized the main biological activities associated with the presence of bioactive compounds in the different plant parts. Finally, the review explores possibilities of uses of chicory and its implementation in food products, with intention to design new functional foods.

The effect of storage temperature and water activity on aflatoxin B1 accumulation in hull-less and hulled spelt grains.

BACKGROUND: In concomitance with shifts in climate conditions in recent years, an increasingly frequent emergence of Aspergillus flavus and aflatoxins in cereals has been observed. In this study the effects of temperature (15, 23, 30 and 37 °C) and water activity (aw ) (0.85, 0.90, 0.95 and 0.99) on aflatoxin B1 (AFB1 ) production by A. flavus isolate inoculated on hull-less and hulled spelt grains were investigated. RESULTS: The optimal conditions for AFB1 biosynthesis were reached at 30 °C and aw value of 0.99 in the all tested samples (hull-less grains, dehulled spelt grains and hulls). The AFB1 accumulation was significantly higher in hull-less than in dehulled grains, that implicated a protective effect of spelt hulls. The levels of AFB1 were about 10-170 times higher in hulls than in grains. In order to determine the possibility of predicting the occurrence of AFB1 under different storage conditions mathematical models [second order polynomial (SOP) and artificial neural network (ANN)] were applied. CONCLUSION: The achievement of such estimation facilitates further decisions on continuous monitoring of the potential hazard related to AFB1 contamination of stored spelt-based food. The knowledge of the storage temperature and aw effects on the AFB1 content in spelt during the postharvest phase is of great practical importance. © 2019 Society of Chemical Industry.

Betaine in Cereal Grains and Grain-Based Products.

Betaine is a non-essential nutrient which performs several important physiological functions in organisms. Abundant data exist to suggest that betaine has a potential for prevention of chronic diseases and that its dietary intake may contribute to overall health enhancement. Several studies have pointed out that the betaine status of the general population is inadequate and have suggested nutritional strategies to improve dietary intake of betaine. Cereal-based food has been implicated as the major source of betaine in the Western diet. This review summarizes the results on the betaine content in various cereals and related products. Attention has been given to the betaine content in gluten-free grains and products. It also discusses the stability of betaine during processing (cooking, baking, extrusion) and possibilities to increase betaine content by fortification.

Apple pectin-derived oligosaccharides produce carbon dioxide radical anion in Fenton reaction and prevent growth of Escherichia coli and Staphylococcus aureus.

Pectin is the main soluble fiber in apples or citruses. It may be fermented by gut microbiota to metabolites showing local intestinal and systemic effects. A wide range of beneficial effects of dietary pectin includes impacts on the redox milieu and microbiota profile. We prepared pectin-derived oligosaccharides (apple (APDO) and citrus) and polygalacturonic acid-derived oligosaccharides, using alkaline hydrolysis by hydrogen peroxide, and analyzed them by Fourier Transform Infrared spectrometry. Furthermore, we analyzed the effects of pectin-derived oligosaccharides on hydroxyl radical (HO)-generating Fenton reaction using electron paramagnetic resonance spin-trapping spectroscopy, and the effects on the growth of Escherichia coli and Staphylococcus aureus in the presence of dietary-relevant HO-generating system (iron+ascorbate). The oligosaccharides react with HO radical to produce carbon dioxide radical anion (CO2-). A comparative analysis showed that APDO has the most prominent bacteriostatic effect. This might be at least partially related to the higher capacity of APDO to produce CO2-, which specifically targets proteins and appears to have a longer lifetime and larger diffusion radius in biological systems compared to HO.

Brachybacterium sp. CH-KOV3 isolated from an oil-polluted environment-a new producer of levan.

Various microorganisms isolated from polluted environments, such as Pseudomonas sp. and Micrococcus sp. can synthesize exopolysaccharides (EPSs) which are natural, non-toxic and biodegradable polymers. EPSs play a key role in protection of microbial cells under various external influences. For humans, these substances have potential use in many industries. EPSs can be applied as a flavor or a fragrance carrier, an emulsifier, a stabilizer, a prebiotic, an antioxidant or an antitumor agent. In this study, we characterized an environmental microorganism that produces EPS, optimized EPS production by this strain and characterized the EPS produced. Isolate CH-KOV3 was identified as Brachybacterium paraconglomeratum. The sucrose level in the growth medium greatly influenced EPS production, and the highest yield was when the microorganism was incubated in media with 500g/L of sucrose. The optimal temperature and pH were 28°C and 7.0, respectively. The nuclear magnetic resonance (NMR) results and GC-MS analysis confirmed that the residues were d-fructofuranosyl residues with ß-configuration, where fructose units are linked by ß-2,6-glycosidic bonds, with ß-2,1-linked branches. All these data indicate that the investigated EPS is a levan-type polysaccharide. Thus, it was concluded that Brachybacterium sp. CH-KOV3 could constitute a new source for production of the bioactive polysaccharide, levan.