Mechanochemically-induced glass formation from two-dimensional hybrid organic-inorganic perovskites.

Hybrid organic-inorganic perovskites (HOIPs) occupy a prominent position in the field of materials chemistry due to their attractive optoelectronic properties. While extensive work has been done on the crystalline materials over the past decades, the newly reported glasses formed from HOIPs open up a new avenue for perovskite research with their unique structures and functionalities. Melt-quenching is the predominant route to glass formation; however, the absence of a stable liquid state prior to thermal decomposition precludes this method for most HOIPs. In this work, we describe the first mechanochemically-induced crystal-glass transformation of HOIPs as a rapid, green and efficient approach for producing glasses. The amorphous phase was formed from the crystalline phase within 10 minutes of ball-milling, and exhibited glass transition behaviour as evidenced by thermal analysis techniques. Time-resolved in situ ball-milling with synchrotron powder diffraction was employed to study the microstructural evolution of amorphisation, which showed that the crystallite size reaches a comminution limit before the amorphisation process is complete, indicating that energy may be further accumulated as crystal defects. Total scattering experiments revealed the limited short-range order of amorphous HOIPs, and their optical properties were studied by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy.

Modulating Liquid-Liquid Transitions and Glass Formation in Zeolitic Imidazolate Frameworks by Decoration with Electron-Withdrawing Cyano Groups.

The liquid phase of metal-organic frameworks (MOFs) is key for the preparation of melt-quenched bulk glasses as well as the shaping of these materials for various applications; however, only very few MOFs can be melted and transformed into stable glasses. Here, the solvothermal and mechanochemical preparation of a new series of functionalized derivatives of ZIF-4 (Zn(im)2, where im- = imidazolate and ZIF = zeolitic imidazolate framework) containing the cyano-functionalized imidazolate linkers CNim- (4-cynanoimidazolate) and dCNim- (4,5-dicyanoimidazolate) is reported. The strongly electron-withdrawing nature of the CN groups facilitates low-temperature melting of the materials (below 310 °C for some derivatives) and the formation of microporous ZIF glasses with remarkably low glass-transition temperatures (down to only about 250 °C) and strong resistance against recrystallization. Besides conventional ZIF-4, the CN-functionalized ZIFs are so far the only MOFs to show an exothermic framework collapse to a low-density liquid phase and a subsequent transition to a high-density liquid phase. By systematic adjustment of the fraction of cyano-functionalized linkers in the ZIFs, we derive fundamental insights into the thermodynamics of the unique polyamorphic nature of these glass formers as well as further design rules for the porosity of the ZIF glasses and the viscosity of their corresponding liquids. The results provide new insights into the unusual phenomenon of liquid-liquid transitions as well as a guide for the chemical diversification of meltable MOFs, likely with implications beyond the archetypal ZIF glass formers.

Quantification of gas-accessible microporosity in metal-organic framework glasses.

Metal-organic framework (MOF) glasses are a new class of glass materials with immense potential for applications ranging from gas separation to optics and solid electrolytes. Due to the inherent difficulty to determine the atomistic structure of amorphous glasses, the intrinsic structural porosity of MOF glasses is only poorly understood. Here, we investigate the porosity features (pore size and pore limiting diameter) of a series of prototypical MOF glass formers from the family of zeolitic imidazolate frameworks (ZIFs) and their corresponding glasses. CO2 sorption at 195 K allows quantifying the microporosity of these materials in their crystalline and glassy states, also providing excess to the micropore volume and the apparent density of the ZIF glasses. Additional hydrocarbon sorption data together with X-ray total scattering experiments prove that the porosity features of the ZIF glasses depend on the types of organic linkers. This allows formulating design principles for a targeted tuning of the intrinsic microporosity of MOF glasses. These principles are counterintuitive and contrary to those established for crystalline MOFs but show similarities to strategies previously developed for porous polymers.

Tuning the High-Pressure Phase Behaviour of Highly Compressible Zeolitic Imidazolate Frameworks: From Discontinuous to Continuous Pore Closure by Linker Substitution.

The high-pressure behaviour of flexible zeolitic imidazolate frameworks (ZIFs) of the ZIF-62 family with the chemical composition M(im)2-x (bim)x is presented (M2+ =Zn2+ , Co2+ ; im- =imidazolate; bim- =benzimidazolate, 0.02≤x≤0.37). High-pressure powder X-ray diffraction shows that the materials contract reversibly from an open pore (op) to a closed pore (cp) phase under a hydrostatic pressure of up to 4000 bar. Sequentially increasing the bim- fraction (x) reinforces the framework, leading to an increased threshold pressure for the op-to-cp phase transition, while the total volume contraction across the transition decreases. Most importantly, the typical discontinuous op-to-cp transition (first order) changes to an unusual continuous transition (second order) for x≥0.35. This allows finetuning of the void volume and the pore size of the material continuously by adjusting the pressure, thus opening new possibilities for MOFs in pressure-switchable devices, membranes, and actuators.

Meltable Mixed-Linker Zeolitic Imidazolate Frameworks and Their Microporous Glasses: From Melting Point Engineering to Selective Hydrocarbon Sorption.

Porous glasses from metal-organic frameworks (MOFs) represent a new class of functional inorganic-organic materials, which have been proposed for applications ranging from solid electrolytes to radioactive waste storage. So far, just a few zeolitic imidazolate frameworks (ZIFs), a subset of MOFs, have been reported to melt and the structural and compositional requirements for MOF melting and glass formation are poorly understood. Here, we show how the melting point of the prototypical ZIF-4/ZIF-62(M) frameworks (composition M(im)2-x(bim)x; M2+ = Co2+, Zn2+; im- = imidazolate; bim- = benzimidazolate) can be controlled systematically by adjusting the molar ratio of the two imidazolate-type linkers im- and bim-. By covering the entire range from x = 0 to 0.35, we unveil a delicate transition from ZIF materials showing sequential amorphization/recrystallization to derivatives exhibiting coherent melting and a liquid phase that is stable over a large temperature window. The melting point of this ZIF system is a direct function of x and can be lowered from ca. 430 °C to only 370 °C, by far the lowest melting point reported for a three-dimensional porous MOF. On the basis of our results, we postulate compositional requirements for ZIF melting and glass formation, which may guide the search for other meltable ZIFs. Moreover, gas physisorption experiments establish that the ZIF glasses adsorb technologically relevant C3 and C4 hydrocarbons. Importantly, the adsorption kinetics are much faster for propylene compared to propane and are also dependent on the im-:bim- ratio, thus demonstrating the potential of these ZIF glasses for applications in gas separation.