RESUMEN
Real-time observation of the actual contact area between surface interfaces at the nanoscale enables more precise examination of what happens during friction. We have combined micro electro mechanical system actuators and transmission electron microscopy (TEM) observation, to both apply and measure forces across nanoscale junctions and contacts. This custom-designed experimental system can measure the true surface area of a contact site from a lateral viewpoint, while simultaneously measuring the friction force. We scratched surfaces coated with diamond like carbon, a classical solid lubricant, and observed the formation of wear particles that slipped and rolled between the interface. TEM images showed that the shape of the surface at the nanoscale underwent permanent deformation when acted upon with forces as low as several tens of nano newtons. The results demonstrated the limitations of friction analyses relying on friction force measurements without real-time surface profiling.
RESUMEN
Ballistic transport and sub-10 nm channel lengths have been achieved in transistors containing one single-walled carbon nanotube (SWNT). To fill the gap between single-tube transistors and high-performance logic circuits for the replacement of silicon, large-area, high-density, and purely semiconducting (s-) SWNT arrays are highly desired. Here we demonstrate the fabrication of multiple transistors along a purely semiconducting SWNT array via an on-chip purification method. Water- and polymer-assisted burning from site-controlled nanogaps is developed for the reliable full-length removal of metallic SWNTs with the damage to s-SWNTs minimized even in high-density arrays. All the transistors with various channel lengths show large on-state current and excellent switching behavior in the off-state. Since our method potentially provides pure s-SWNT arrays over a large area with negligible damage, numerous transistors with arbitrary dimensions could be fabricated using a conventional semiconductor process, leading to SWNT-based logic, high-speed communication, and other next-generation electronic devices.
RESUMEN
Attempts to elucidate chromosome structure have long remained elusive. Electron microscopy is useful for chromosome structure research because of its high resolution and magnification. However, biological samples such as chromosomes need to be subjected to various preparation steps, including dehydration, drying, and metal/carbon coating, which may induce shrinkage and artifacts. The ionic liquid technique has recently been developed and it enables sample preparation without dehydration, drying, or coating, providing a sample that is closer to the native condition. Concurrently, focused ion beam/scanning electron microscopy (FIB/SEM) has been developed, allowing the investigation and direct analysis of chromosome interiors. In this study, we investigated chromosome interiors by FIB/SEM using plant and human chromosomes prepared by the ionic liquid technique. As a result, two types of chromosomes, with and without cavities, were visualized, both for barley and human chromosomes prepared by critical point drying. However, chromosome interiors were revealed only as a solid structure, lacking cavities, when prepared by the ionic liquid technique. Our results suggest that the existence and size of cavities depend on the preparation procedures. We conclude that combination of the ionic liquid technique and FIB/SEM is a powerful tool for chromosome study.
Asunto(s)
Cromosomas/ultraestructura , Líquidos Iónicos , Microscopía Electrónica de Rastreo/métodos , Hordeum , HumanosRESUMEN
We improved adhesiveness of a neuron-like cell, PC12, on a Parylene-C surface by O(2) plasma treatment which changes the surface from hydrophobic to hydrophilic. Neural cell adhesiveness on the plasma-treated Parylene-C was more than twenty times better compared to non-treated Parylene-C and it was close to that on a conventional polystyrene tissue-culture dish.
Asunto(s)
Neuronas/citología , Oxígeno/química , Polímeros/química , Técnicas de Cultivo de Tejidos/métodos , Xilenos/química , Materiales Biocompatibles/química , Adhesión Celular , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Poliestirenos/química , Propiedades de SuperficieRESUMEN
Nanoelectromechanical devices, which can be used as nanotools in nanofactories, were fabricated by focused ion beam chemical vapor deposition (FIB-CVD). The devices are made of diamond-like carbon (DLC), deposited on a Si substrate using gasified phenanthrene (C14H10) as a carbon source. The Young modulus and density of the deposited DLC were measured as 190 GPa and 3.8 g cm-3, respectively. The work function was smaller for DLC (2.9 eV) than for W (4.7 eV) and Fe (5.2 eV) deposited by FIB-CVD. A nanomanipulator was manufactured by FIB-CVD and used for actual manipulations. A glass capillary based local field emitter was developed and produced as a tool for spot deposition, and its electron field emission was confirmed. FIB-CVD is proven as an efficient fabrication technology of novel nanoelectromechanical devices.