RESUMEN
Precise control of the elemental composition and distribution in bimetallic nanoparticles is of great interest for both fundamental studies and applications, e.g. in catalysis. We present a new innovative and facile synthesis strategy for the production of true solid solution Pt1-x Rh x nanoparticles. This constitutes a development of the established heat-up method, where undesired shell formation is fully suppressed, despite utilizing metal precursors with different reaction rates. The concept is demonstrated through synthesis of selected Pt1-x Rh x solid solution compositions via the polyalcohol reduction approach. In addition, we provide modified procedures, using the same surface stabilizing agent/metal precursors reaction matrix yielding controlled model Rh(core)-Pt(shell) and Pt(core)-Rh(shell) nanoparticles. Tunable bimetallic solid solution and core-shell nanoparticles with the same capping agent are of key importance in systematic fundamental studies, as functional materials properties may be altered by modifying the surface termination.
RESUMEN
In situ surface X-ray diffraction and transmission electron microscopy at 1 bar show massive material transport of platinum during high-temperature NO reduction with H2. A Pt(110) single-crystal surface shows a wide variety of surface reconstructions and extensive faceting of the surface. Pt nanoparticles change their morphology depending on the gas composition: They are faceted in hydrogen-rich environments, but are more spherical in NO-rich environments, indicating the formation of vicinal surfaces. We conclude that high coverage of NO combined with sufficient mobility of platinum surface atoms is the driving force for the formation of steps on both flat surfaces and nanoparticles. Since the steps that are introduced provide strongly coordinating adsorption sites with potential catalytic benefits, this may be of direct practical relevance for the performance of catalytic nanoparticles under high-pressure conditions.
RESUMEN
Titanium white (TiO2) has been widely used as a pigment in the 20th century. However, its most photocatalytic form (anatase) can cause severe degradation of the oil paint in which it is contained. UV light initiates TiO2-photocatalyzed processes in the paint film, degrading the oil binder into volatile components resulting in chalking of the paint. This will eventually lead to severe changes in the appearance of a painting. To date, limited examples of degraded works of art containing titanium white are known due to the relatively short existence of the paintings in question and the slow progress of the degradation process. However, UV light will inevitably cause degradation of paint in works of art containing photocatalytic titanium white. In this work, a method to detect early warning signs of photocatalytic degradation of unvarnished oil paint is proposed, using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Consequently, a four-stage degradation model was developed through in-depth study of TiO2-containing paint films in various stages of degradation. The XPS surface analysis proved very valuable for detecting early warning signs of paint degradation, whereas the AFM results provide additional confirmation and are in good agreement with bulk gloss reduction.
RESUMEN
BACKGROUND: Clinical studies investigating medicinal products need to comply with laws concerning good clinical practice (GCP) and good manufacturing practice (GMP) to guarantee the quality and safety of the product, to protect the health of the participating individual and to assure proper performance of the study. However, there are no specific regulations or guidelines for non-Medicinal Investigational Products (non-MIPs) such as allergens, enriched food supplements, and air pollution components. As a consequence, investigators will avoid clinical research and prefer preclinical models or in vitro testing for e.g. toxicology studies. THE AIM OF THIS ARTICLE IS TO: 1) briefly review the current guidelines and regulations for Investigational Medicinal Products; 2) present a standardised approach to ensure the quality and safety of non-MIPs in human in vivo research; and 3) discuss some lessons we have learned. METHODS AND RESULTS: We propose a practical line of approach to compose a clarifying product dossier (PD), comprising the description of the production process, the analysis of the raw and final product, toxicological studies, and a thorough risk-benefit-analysis. This is illustrated by an example from a human in vivo research model to study exposure to air pollutants, by challenging volunteers with a suspension of carbon nanoparticles (the component of ink cartridges for laser printers). CONCLUSION: With this novel risk-based approach, the members of competent authorities are provided with standardised information on the quality of the product in relation to the safety of the participants, and the scientific goal of the study.
Asunto(s)
Investigación Biomédica/métodos , Carbono/administración & dosificación , Nanopartículas/administración & dosificación , Nanotecnología/métodos , Toxicología/métodos , Administración por Inhalación , Investigación Biomédica/legislación & jurisprudencia , Investigación Biomédica/normas , Carbono/efectos adversos , Guías como Asunto , Humanos , Exposición por Inhalación/efectos adversos , Nanopartículas/efectos adversos , Nanotecnología/legislación & jurisprudencia , Nanotecnología/normas , Formulación de Políticas , Salud Pública/legislación & jurisprudencia , Salud Pública/normas , Medición de Riesgo , Toxicología/legislación & jurisprudencia , Toxicología/normasRESUMEN
Many catalytic reactions under fixed conditions exhibit oscillatory behaviour. The oscillations are often attributed to dynamic changes in the catalyst surface. So far, however, such relationships were difficult to determine for catalysts consisting of supported nanoparticles. Here, we employ a nanoreactor to study the oscillatory CO oxidation catalysed by Pt nanoparticles using time-resolved high-resolution transmission electron microscopy, mass spectrometry and calorimetry. The observations reveal that periodic changes in the CO oxidation are synchronous with a periodic refacetting of the Pt nanoparticles. The oscillatory reaction is modelled using density functional theory and mass transport calculations, considering the CO adsorption energy and the oxidation rate as site-dependent. We find that to successfully explain the oscillations, the model must contain the phenomenon of refacetting. The nanoreactor approach can thus provide atomic-scale information that is specific to surface sites. This will improve the understanding of dynamic properties in catalysis and related fields.
RESUMEN
In situ high-resolution transmission electron microscopy (TEM) of solids under reactive gas conditions can be facilitated by microelectromechanical system devices called nanoreactors. These nanoreactors are windowed cells containing nanoliter volumes of gas at ambient pressures and elevated temperatures. However, due to the high spatial confinement of the reaction environment, traditional methods for measuring process parameters, such as the local temperature, are difficult to apply. To address this issue, we devise an electron energy loss spectroscopy (EELS) method that probes the local temperature of the reaction volume under inspection by the electron beam. The local gas density, as measured using quantitative EELS, is combined with the inherent relation between gas density and temperature, as described by the ideal gas law, to obtain the local temperature. Using this method we determined the temperature gradient in a nanoreactor in situ, while the average, global temperature was monitored by a traditional measurement of the electrical resistivity of the heater. The local gas temperatures had a maximum of 56 °C deviation from the global heater values under the applied conditions. The local temperatures, obtained with the proposed method, are in good agreement with predictions from an analytical model.
Asunto(s)
Microscopía Electrónica/métodos , Electrones , Gases/química , Microscopía Electrónica de Transmisión/métodos , Espectroscopía de Pérdida de Energía de Electrones/métodos , TemperaturaRESUMEN
A new method for preparing carbon-free, temperature-stable Transmission Electron Microscope (TEM) grids is presented. An 80% Au/20% Pd metal film is deposited onto a 'holey' microgrid carbon supported on standard mixed-mesh Au TEM grids. Subsequently, the carbon film is selectively removed using plasma cleaning. In this way, an all-metal TEM film is made containing the 'same' microgrid as the original carbon film. Although electron transparency of the foil is reduced significantly, the open areas for TEM inspection of material over these areas are maintained. The metal foil can be prepared with various thicknesses and ensures good electrical conductivity. The new Au/Pd grids are stable to at least 775K under vacuum conditions.
RESUMEN
The enantioselective hydrogenation of 1-phenyl-1,2-propanedione was carried out over Pt/Al2O3, Pt/SiO2, Pt/SF (silica fiber), Pt/C catalysts modified with cinchonidine under ultrasonic irradiation. The initial rate, regioselectivity and enantioselectivity were investigated for different catalyst pretreatments, solvents and ultrasonic powers. The ultrasound effects were very catalyst dependent. The sonication significantly enhanced enantioselectivity and activity of the Pt/SF (silica fiber) catalyst. For the other Pt supported catalysts the reaction rate, enantioselectivity and regioselectivity increased moderately. The choice of solvent influenced the impact of ultrasound effect, namely in mesitylene, which has the lowest vapor pressure, the highest ultrasound enhancement was observed. The effect of sonication on catalysts surface was studied by transmission electron microscopy and scanning electron microscopy (SEM). No significant change in the metal particle size distribution due to sonication was observed. However, in the case of the Pt/SF catalyst, acoustic irradiation induced morphological changes on the catalyst particle surface (SEM), which might be the cause for enhancement of the initial reaction rate and enantioselectivity.
Asunto(s)
Chalconas/química , Chalconas/efectos de la radiación , Hidrógeno/química , Plomo/química , Solventes/química , Sonicación , Catálisis , Hidrogenación , Isomerismo , Plomo/efectos de la radiación , Solventes/efectos de la radiación , Especificidad por SustratoRESUMEN
Sixty-four IgG Rh monoclonal antibodies (Mabs) submitted to the Fourth International Workshop on Monoclonal Antibodies Against Human Red Blood Cells and Related Antigens were characterised and tested in quantitative functional assays at five laboratories. The biological assays measured the ability of anti-D to mediate phagocytosis or extracellular lysis of RBC by IgG Fc receptor (Fc gamma R)-bearing effector cells. Interactions of RBC pre-sensitised with anti-D (EA-IgG) with monocytes in chemiluminescence (CL) assays were found proportional to the amount of IgG anti-D on the RBC. Using antibodies to inhibit Fc gamma RI, Fc gamma RII or Fc gamma RIII, the only receptor utilised in the monocyte CL and ADCC assays for interactions with EA-IgG1 was found to be Fc gamma RI. In these assays, enhanced interactions were promoted by EA-IgG3 and additional Fc gamma receptors may have contributed. IgG2 anti-D was not reactive in these assays and EA-IgG4 promoted weak reactions through Fc gamma RI. A macrophage ADCC assay showed that haemolysis of EA-IgG3 was greater than that of EA-IgG1, mediated mainly through Fc gamma RIII. In ADCC assays using lymphocytes (NK cells) as effector cells and papainised RBC target cells, only a minority of IgG1 anti-D Mabs were shown to be able to mediate haemolysis in the presence of monomeric IgG (AB serum or IVIg). These interactions were mediated solely through Fc gamma RIII. Haemolysis via Fc gamma RIII may depend on the presence of certain sugars on the oligosaccharide moiety of IgG. Most Mabs (IgG1, IgG2, IgG3 and IgG4) elicited intermediate, low or no haemolysis in these assays. Blocking studies indicated that low activity IgG1 and IgG4 anti-D utilised only Fc gamma RI. Other IgG1 and IgG3 Mabs appeared to promote haemolysis through Fc gamma RI and Fc gamma RIII while IgG2 was inhibited by Mabs to both Fc gamma RII and Fc gamma RIII, suggesting a variety of Fc gamma R are utilised for anti-D of low haemolytic activity. Excellent agreement between the results of the lymphocyte ADCC assays and antibody quantitation was observed between the participating laboratories.
Asunto(s)
Anticuerpos Monoclonales/inmunología , Inmunoglobulina G/inmunología , Isoanticuerpos/inmunología , Receptores de IgG/inmunología , Anticuerpos Monoclonales/química , Citotoxicidad Celular Dependiente de Anticuerpos , Glicosilación , Hemólisis , Humanos , Inmunoglobulina G/química , Inmunoglobulinas Intravenosas/inmunología , Isoanticuerpos/química , Células Asesinas Naturales/inmunología , Mediciones Luminiscentes , Linfocitos/inmunología , Macrófagos/inmunología , Monocitos/inmunología , Oligosacáridos/inmunología , Fagocitosis , Procesamiento Proteico-Postraduccional , Estructura Terciaria de Proteína , Receptores de IgG/clasificación , Globulina Inmune rho(D)RESUMEN
Hybrid organo-silica materials possessing uniform nanoscale porosity in the super-micropore size range (1.0-2.0 nm diameter) have been prepared using neutral alkylamine and non-ionic alkyl(phenyl)polyethylene oxide surfactants as structure-directing agents.