Extensive Characterization of Alginate, Chitosan and Microfibrillated Cellulose Cast Films to Assess their Suitability as Barrier Coating for Paper and Board.

The vast amount of synthetic polymers used in packaging is putting a strain on the environment and is depleting finite, non-renewable raw materials. Abundantly available biopolymers such as alginate, chitosan and microfibrillated cellulose (MFC) have frequently been suggested in the literature to replace synthetic polymers and their barrier properties have been investigated in detail. Many studies aim to improve the properties of standalone biopolymer films. Some studies apply these biopolymers as barrier coatings on paper, but the solids content in most of these studies is quite low, which in turn would result in a high energy demand in industrial drying processes. The aim of this study is to suggest a laboratory procedure to investigate the suitability of these biopolymers at higher and such more industrially relevant solids content as potential coating materials for paper and board in order to improve their barrier properties. First, biopolymer solutions are prepared at a high solids content at which the viscosity at industrially relevant higher shear rates of 50,000 s-1 (1000 s-1 for MFC) is in the same range as a synthetic reference material (in this case ethylene vinyl alcohol EVOH) at 10 wt%. These solutions are analyzed regarding properties such as rheology and surface tension that are relevant for their coatability in industrial coating processes. Then, free-standing films are cast, and the films are characterized regarding important properties for packaging applications such as different surface, mechanical and barrier properties. Based on these results suitable biopolymers for future coating trials can be easily identified.

Bioplastics for Food Packaging: Environmental Impact, Trends and Regulatory Aspects.

The demand to develop and produce eco-friendly alternatives for food packaging is increasing. The huge negative impact that the disposal of so-called "single-use plastics" has on the environment is propelling the market to search for new solutions, and requires initiatives to drive faster responses from the scientific community, the industry, and governmental bodies for the adoption and implementation of new materials. Bioplastics are an alternative group of materials that are partly or entirely produced from renewable sources. Some bioplastics are biodegradable or even compostable under the right conditions. This review presents the different properties of these materials, mechanisms of biodegradation, and their environmental impact, but also presents a holistic overview of the most important bioplastics available in the market and their potential application for food packaging, consumer perception of the bioplastics, regulatory aspects, and future challenges.

Comparison of the Functional Barrier Properties of Chitosan Acetate Films with Conventionally Applied Polymers.

The current demand to cut back on the use of plastic materials has brought a major boost to the search for bio-based alternatives. Not only are plastic bags and primary food packaging under scrutiny here, but also those materials used as functional barriers to reduce, for example, the migration of mineral oil hydrocarbons (MOH) from recycled paper and board packaging. Most of the barriers now in use are synthetic, often have only moderate barrier functionalities and in addition reduce the environmentally-friendly character of cellulose-based materials. Against this background, bio-based polymers have been evaluated in terms of their functional barrier properties. Chitosan was found to be among the best performers in these materials. In this study, the behavior of a lab-made chitosan acetate film was compared with conventionally produced polymer films. The two-sided migration experiment described recently was used to determine the barrier properties of the tested materials. This not only allowed to test the intrinsic migration of the films and the permeation through them, but also to simulate real packaging situations by using a recycled paper as donor for MOH. The migrated fractions were determined using gas-chromatography-based techniques. While the conventionally produced polymer films showed only moderate barrier function, excellent results were seen for the biopolymer. It reduced the migration from the recycled paper to not detectable, singling it out as a good alternative to conventional materials.

Characterization of natural polymers as functional barriers for cellulose-based packaging materials.

Cellulose-based packaging materials are currently the most commonly used food packaging materials due to their light weight, stability and affordable price. However, the use of recycled paper and board adds to the risk that undesirable substances migrate into the packed goods, since contaminants are not completely removed during the recycling process and can accumulate in the final product. The only available fast and practical solution that can be used to reduce the migration of these substances is the application of functional barriers in the packaging. The applied barriers are currently mostly synthetic, which either serve only a moderate barrier function and/or have the disadvantage that it is often more complex and expensive to recycle the resulting packaging material. The aim of this project is to evaluate different bio-based or biodegradable polymers with regards to their barrier properties. Due to the fact that the transport phenomena are mainly driven by (gas phase) migration, methods based on gas chromatography (GC), including GC coupled with mass spectrometry (GC-MS) and flame ionization detection (GC-FID), GC-FID coupled online with high pressure liquid chromatography (HPLC-GC-FID), and comprehensive GCxGC-MS were used to qualify and quantify the migrated substances. This use of a wide range of different methods and instruments yielded excellent results, allowing us to comprehensively characterize the biopolymers and their barrier function.

Application of Industrially Produced Chitosan in the Surface Treatment of Fibre-Based Material: Effect of Drying Method and Number of Coating Layers on Mechanical and Barrier Properties.

Chitosan is a versatile biopolymer with many interesting functionalities. Its effects on the barrier and mechanical properties of single- or double-coated fibre-based packaging papers in dependence on the applied drying regime were successfully tested. Our investigations revealed chitosan to be a highly robust biopolymer, since the different drying regimes did not alter its contribution to the development of strength and barrier properties of the coated packaging papers. These properties showed a stronger influence of the applied coat weights than of the different drying regimes. The effect of chitosan coatings were quantified by measuring tensile strength (TS), burst strength (BS) and tensile energy absorption (TEA). These revealed that TS, BS and TEA of the coated papers increased significantly. Moreover, the chitosan-coated papers were less permeable against water vapor and air. High grease resistance was observed for double-coated papers, irrespective of the drying regimes. The coated paper surface showed a more hydrophilic character, resulting in lower contact angles and higher water absorption properties. In this study, industrially produced chitosan has been proven to be a renewable, robust biopolymer that can be utilized as an additive to increase strength and the barrier properties of fibre-based materials.