RESUMEN
This study explores task-specific ionic liquids (TSILs) in smart floor systems, highlighting their strong electrical rectification abilities and previously established wood preservative properties. Two types of TSILs, featuring a "sweet" anion and a terpene-based cation, were used to treat selected wood samples, allowing for a comparison of their physical and electrical performance with untreated and commercially treated counterparts. Drop shape analysis and scanning electron microscopy were employed to evaluate the surface treatment before and after coating. Near-IR was used to confirm the presence of a surface modifier, and thermogravimetric analysis (TGA) was utilized to assess the thermal features of the treated samples. The different surface treatments resulted in varied triboelectric nanogenerator (TENG) parameters, with the molecular structure and size of the side chains being the key determining factors. The best results were achieved with TSILs, with the instantaneous voltage increasing by approximately five times and the highest voltage reaching 300 V under enhanced loading. This work provides fresh insights into the potential application spectrum of TSILs and opens up new avenues for directly utilizing tested ionic compounds in construction systems.
RESUMEN
Long-time electric field action on perovskite piezoelectric ceramic leads to chemical degradation. A new way to accelerate the degradation is the exposure of the ceramic to DC electric fields under a vacuum. A high-quality commercial piezoelectric material based on PbZr1-xTixO3 is used to study such impacts. To avoid the influence of ferroelectric properties and possible removal of oxygen and lead oxides during the degradation process, the experiments are in the temperature interval of 500 °C > T > TC. Changes in resistance during the electrodegradation process is an electrically-induced deoxidation, transforming the ceramic into a metallic-like material. This occurs with an extremely low concentration of effused oxygen of 1016 oxygen atoms per 1 cm3. Due to this concentration not obeying the Mott criterion for an isolator-metal transition, it is stated that the removal of oxygen mostly occurs along the grain boundaries. It agrees with the first-principle calculations regarding dislocations with oxygen vacancies. The decrease in resistivity during electrodegradation follows a power law and is associated with a decrease in the dislocation dimension. The observed reoxidation process is a lifeline for the reconstructing (self-healing) properties of electro-degraded ceramics in harsh cosmic conditions. Based on all of these investigations, a macroscopic and nanoscopic model of the electrodegradation is presented.
RESUMEN
Intensive investigations of PbZr1-xTixO3 (PZT) materials with the ABO3 perovskite structure are connected with their extraordinary piezoelectric properties. Especially well known are PZT ceramics at the Morphotropic Phase Boundary (MPB), with x~0.48, whose applications are the most numerous among ferroelectrics. These piezoelectric properties are often obtained by doping with various ions at the B sites. Interestingly, we have found similar properties for undoped PZT single crystals with low Ti content, for which we have confirmed the existence of the tricritical point near x~0.06. For a PbZr0.95 ± 0.01Ti0.05∓ 0.01O3 crystal, we describe the ultrahigh strain, dielectric, optical and piezoelectric properties. We interpret the ultrahigh strain observed in the region of the antiferroelectric-ferroelectric transition as an inverse piezoelectric effect generated by the coexistence of domains of different symmetries. The complex domain coexistence was confirmed by determining optical indicatrix orientations in domains. The piezoelectric coefficient in this region reached an extremely high value of 5000 pm/V. We also verified that the properties of the PZT single crystals from the region near the tricritical point are incredibly susceptible to a slight deviation in the Ti content.
RESUMEN
The dielectric properties of Ba1-xCaxTiO3 (x = 0.17) ceramics were studied in a wide frequency range of 20 Hz-53 GHz. Diffused ferroelectric phase transition was revealed close to 339 K in the dielectric properties of ceramics. The behaviour of distributions of relaxation times in vicinity of the ferroelectric phase transition temperature is also typical for order-disorder ferroelectric phase transition. However, at lower temperatures (below 200 K), the most probable relaxation increased according to the Arrhenius law. At lower temperatures the maximum of the imaginary part of dielectric permittivity versus temperature strongly shifted to higher temperatures when the frequency increased (from 125 K at 1.21 kHz to 300 K at 33 GHz). This behaviour was attributed to the dynamics of Ti ions. The origin of the crossover from ferroelectric to relaxor behaviour of Ba1-xCaxTiO3 (x = 0.17) ceramics is discussed in the paper.
RESUMEN
The magneto-optical activity of high quality transparent thin films of insulating EuTiO3 (ETO) deposited on a thin SrTiO3 (STO) substrate, both being non-magnetic materials, are demonstrated to be a versatile tool for light modulation. The operating temperature is close to room temperature and allows for multiple device engineering. By using small magnetic fields birefringence of the samples can be switched off and on. Similarly, rotation of the sample in the field can modify its birefringence Δn. In addition, Δn can be increased by a factor of 4 in very modest fields with simultaneously enhancing the operating temperature by almost 100 K.
