Prognostic risk factors for apical root resorption in orthodontic patients - Are the Kjær's morphologic characteristics of clinical relevance?

BACKGROUND: Patients undergoing orthodontic treatment (OT) face an increased risk of developing external apical root resorption (EARR). A prognostic risk assessment prior to OT can potentially be conducted through anatomical features in panoramic radiography. This retrospective study aimed to assess the significance of Kjær's morphological characteristics in analyzing the risk of EARR. METHODS: Panoramic radiographs of 1,156 patients (624 females, 532 males) were retrospectively analyzed. Anamnestic and treatment-related data were extracted from patient records. The mean age at the start of OT was 12.8 ± 2.2 years (min. 6.4 years, max. 22.3 years) and at the end of OT 15.9 years (min. 8.5 years, max. 24.1 years). The mean treatment duration was 3.1 ± 1.6 years. Panoramic radiographs with a minimum of two per patient were examined for the presence of Kjær's characteristics. The degree of EARR was registered defining resorption in four degrees of severity. Bivariate analysis and multivariate Poisson regression were performed to assess the association between Kjær's characteristics and EARR patient- and tooth- related (α = 0.05). RESULTS: In total, 72.8% of the patients showed EARR at the end of OT with lateral maxillary incisors most frequently affected. Short roots (p < 0.001) were significantly associated with EARR in patients. Tooth-related microdontia (#12, #22, lower second premolars), narrow crowns (#11, #21, lower incisors), short roots (upper incisors, lower first molars) and ectopia (#11, #21, #13), such as shorter distal roots of the mandibular first molar showed a significant association with EARR depending on severity degree. The type of orthodontic appliance (fixed: p < 0.001, fixed and removeable: p = 0.008), as well as treatment duration (p < 0.001) were also identified as risk factors for EARR. CONCLUSIONS: Although the risk assessment for EARR development through panoramic radiography analysis is limited, predisposition appears to be present in specific dental characteristics and treatment-related factors.

Impact of initial lip competence on the outcome of class II functional appliances therapy.

OBJECTIVES: The aim of this prospective clinical study was to evaluate the impact of initial lip position on class II functional appliance therapy. MATERIALS AND METHODS: In total, 34 class II division 1 patients (23 females, 19 males; mean age 12.4 ± 0.9 years) that met the inclusion criteria (> ½ class II molar relationship, overjet > 6 mm, ANB > 4°, neutral or horizontal growth pattern, cervical vertebral maturation stage (CVMS) II - III, mean wear-time > 10 h/day) were consecutively divided into two groups (lip incompetence (LI); lip competence (LC)). All patients were treated with the Sander bite jumping appliance (BJA). Wear time was microelectronically measured. Lateral cephalograms were taken at the beginning (T0) and after 1 year of treatment (T1). An untreated class II group served as a control (CG). Inter-group comparisons were determined with Mann-Whitney U tests for independent samples. RESULTS: Significant skeletal treatment effects were found in both treated groups when compared to the CG with significantly more pronounced mandibular skeletal effects in the LI than in the LC group (mandibular base length p < 0.001, composite mandibular base length p < 0.001, condylar head growth p = 0.002, co-pg p < 0.00, go-pg p = 0.003, reduction of the ANB angle p = 0.009, and Wits appraisal p < 0.001). CONCLUSION: The more pronounced mandibular effects in the LI group were composed of the functional orthopedic effect plus harmonization of the lip competence. CLINICAL RELEVANCE: Functional harmonization of lip incompetence with BJA enhances mandibular growth stimulation. Lip incompetence seems to impede mandibular growth and its harmonization seems to be a preventive approach.

Age-dependent interactions of maxillary sutures during RME and their effects on palatal morphology : CBCT and dental cast analysis.

PURPOSE: The effects of rapid maxillary expansion (RME) on the transverse palatine and midfacial sutures have been extensively scrutinized. Unlike the dentition stage, age-dependency was not yet regarded when investigating morphological changes of the tooth-bearing palate. Therefore, the first aim of the present study was to analyse age-dependent sutural and morphological changes of the palate in selected patients by cone-beam computed tomography (CBCT) and dental cast analysis. Secondly, age-dependent effects of RME on width, height, and depth of the palate in the region of the maxillary palatine processes were investigated by a comprehensive dental cast study, so that the combination of results could be used to provide a biomechanical explanation of the occurring changes. METHODS: CBCT datasets of 9 patients (between 7.3 and 13.8 years) were measured around the median palatal suture and compared with the results of an individualised dental cast analysis. In addition, possible effects on other maxillary sutures were investigated. In the dental cast study, changes after RME in the tooth-bearing palate were analysed three-dimensionally in 60 children and adolescents. It was possible to divide those into three equally sized, age-dependant groups (PG1: < 10 years, n = 20; PG2: ≥ 10 < 12 years, n = 20; PG3: ≥ 12 years, n = 20). RESULTS: The CBCT analysis reveals age-related differences in sutural responses. The opening width of the median palatine suture decreases cranially (frontal) and dorsally (horizontal). The opening mode thus changes from parallel to triangular in both planes. The transverse palatine suture completely opens in younger patients only (PG1 and PG2). The width increases are always significant in all patients. While in PG1 the width increase is greater posteriorly than anteriorly, this is always reversed in PG2 and PG3. The palatal height always increases significantly anteriorly, but posteriorly only in the youngest patients (PG 1) median and paramedian. In PG 2 and PG 3, the posterior height change is very small. That is the reason why the anteroposterior comparison reveals a much more pronounced height increase anteriorly than posteriorly. CONCLUSION: The comparison of selected CBCT data with a dental cast analysis allows the conclusion that the maxillary expansion after RME in children up to 10 years is rather parallel, whereas it occurs V­shaped (anterior > posterior transversal, inferior > superior vertical) with increasing age, especially in adolescents from the age of 12. In addition to an age-progressive rigidity of the pterygopalatomaxillary junction, morphological changes of the transverse palatine suture during growth seem to be causal. Thus, age-dependent effects of palatal expansion occur due to a positional change of maxillary centres of rotation and resistance. From dental cast measurements, especially at the skeletal-basal level, conclusions can be drawn about the median palatal suture opening mode.

Influence on interradicular bone volume of Invisalign treatment for adult crowding with interproximal enamel reduction: a retrospective three-dimensional cone-beam computed tomography study.

BACKGROUND: The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding, using Invisalign aligner and interproximal enamel reduction (IER), and changes in the volume of interradicular bone. METHODS: A total of 60 cone-beam computed tomography (CBCT) scans from 30 adult patients (28 women, two men; 30 CBCTs pre-treatment, 30 post-treatment) were examined retrospectively in order to measure bone volume three-dimensionally. The patients' average age was 36.03 ± 9.7 years. The interradicular bone volume was measured with OsiriX at four levels in the anterior tooth areas of the maxilla and mandible. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. RESULTS: Overall, a slight increase in the quantity of bone was found (0.12 ± 0.73 mm). There was a highly significant increase in bone in the mandible (0.40 ± 0.62 mm; P <  0.001), while in the maxilla there was a slight loss of bone, which was highly significant in the apical third (- 0.16 ± 0.77 mm; P = 0.001). CONCLUSIONS: Overall, treatment for adult crowding using an aligner and IER appears to have a positive effect on interradicular bone volume, particularly in patients with severe grades of the condition (periodontally high-risk dentition). This effect is apparently independent of IER. This is extremely important with regard to the treatment outcome, since IER and root proximity have been matters of debate in the literature and teeth should remain firmly embedded in their alveolar sockets.

Enamel shear bond strength of two orthodontic self-etching bonding systems compared to Transbond™ XT.

OBJECTIVE: The aim of this in vitro study was to compare the shear bond strength (SBS) and Adhesive Remnant Index (ARI) scores of two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances to the commonly used total etch system Transbond XT™ (in combination with phosphoric acid). MATERIALS AND METHODS: In all, 60 human premolars were randomly divided into three groups of 20 specimens each. In group 1 (control), brackets were bonded with Transbond™ XT primer. Prompt L-Pop™ (group 2) and Scotchbond™ Universal (group 3) were used in the experimental groups. Lower premolar brackets were bonded by light curing the adhesive. After 24 h of storage, the shear bond strength (SBS) was measured using a Zwicki 1120 testing machine. The adhesive remnant index (ARI) was determined under 10× magnification. The Kruskal-Wallis test was used to statistically compare the SBS and the ARI scores. RESULTS: No significant differences in the SBS between any of the experimental groups were detected (group 1: 15.49 ± 3.28 MPa; group 2: 13.89 ± 4.95 MPa; group 3: 14.35 ± 3.56 MPa; p = 0.489), nor were there any significant differences in the ARI scores (p = 0.368). CONCLUSIONS: Using the two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances does not affect either the SBS or ARI scores in comparison with the commonly used total-etch system Transbond™ XT. In addition, Scotchbond™ Universal supports bonding on all types of surfaces (enamel, metal, composite, and porcelain) with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures.

Influence of Invisalign treatment with interproximal enamel reduction (IER) on bone volume for adult crowding: a retrospective three-dimensional cone beam computed tomography study.

BACKGROUND: The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding using Invisalign and interproximal enamel reduction (IER) and changes in the bone volume. METHODS: A total of 60 digital cone beam computed tomography (CBCT) scans from 30 patients (28 women, two men; 30 CBCTs pretreatment, 30 posttreatment) were examined retrospectively in order to record bone volume three-dimensionally before and after treatment. The patients' average age was 36.03 ± 9.7 years. The data were collected and analyzed using the computer programs Mimics 15.0 and OsiriX. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. RESULTS: Analysis of the orovestibular bone volume showed highly significant changes (bone change P <0.001) only in the mandible where more expansion of the dental arch was carried out using proclination or protrusion. The bone lamella was thinner buccally and thicker lingually. In general, bone increases in the oral direction were slightly greater than bone losses in the vestibular direction. No significant changes were detected in the maxilla (bone change P = 0.13). Significant vertical bone loss in the bone height was detected in both the maxilla and the mandible. The largest bone loss was observed in the vestibular direction in the mandible, at a high level of significance (P <0.001). CONCLUSIONS: Particularly in the mandible, therapeutic reduction of the vertical and sagittal bone volume shows that caution should be used in the treatment of tertiary crowding with proclination and expansion. The cortical walls appear to represent the limits for orthodontic tooth movement, at least in adult female patients.

Effect on enamel shear bond strength of adding microsilver and nanosilver particles to the primer of an orthodontic adhesive.

BACKGROUND: The objective of this study was to determine whether the addition of microsilver or nanosilver particles to an orthodontic primer affects shear bond strength (SBS) and bracket/adhesive failure. METHODS: Bovine incisors were randomly divided into six groups with 16 specimens in each: In group 1 (control), brackets were bonded with Transbond™ XT primer. In the experimental groups, microsilver (groups 2 and 3) and nanosilver (groups 4-6) particles of different sizes were added to Transbond XT primer and light cured for 15 seconds [group 2: 0.1% (w/w) microsilver particle size 3.5-18 µm; group 3: 0.3% (w/w) microsilver particle size 3.5-18 µm; group 4: 0.11% (w/w) nanosilver particle size 12.6-18.5 nm; group 5: 0.18% (w/w) nanosilver particle size 12.6-18.5 nm; group 6: 0.33% (w/w) nanosilver particle size 12.6-18.5 nm]. Thereafter, brackets were bonded by light curing the adhesive for 20 seconds. After 24 hours of storage in distilled water at 37 °C, SBS was measured with a Zwicki 1120 testing machine. The adhesive remnant index and the prevalence of silver spots on the specimen surface were determined under 10× magnification. Statistical two-way analysis of variance was performed to compare SBS, and a chi-square test was used to compare ARI scores and the prevalence of silver spots. RESULTS: No significant differences in SBS (control: 16.59 ± 6.82 MPa; group 2: 20.6 ± 4.19 MPa; group 3: 16.98 ± 4.84 MPa; group 4: 17.15 ± 5.92 MPa; group 5: 20.09 ± 3.35 MPa; group 6: 16.44 ± 4.51 MPa; p > 0.665) and ARI scores (p = 0.901) were found between the control group and any experimental group. Only experimental groups with nanosilver particles revealed statistically more silver spots on the remaining adhesive. CONCLUSIONS: Addition of small concentrations of microsilver or nanosilver particles affects neither SBS nor ARI scores. Addition of nanosilver particles results in silver spots in the remaining primer visible under 10× magnification. Further studies are needed to investigate the anti-caries potential and clinical performance of conventional orthodontic primer with incorporated nanosilver or microsilver particles.