Sustainable Synthesis of Highly Functionalized Activated Carbon using Plasma Technology.

Surface functionalized activated carbon (SFAC) has been used for several applications, including adsorption, catalysis and energy storage materials. Existing chemical and physical activation methods for surface functionalization are mostly identified as expensive, inefficient, and non-green methods. Plasma, known as the fourth state of matter, has recently been recognized as an attractive and sustainable method for introducing a higher degree of surface functionality to activated carbon. It also improves the bulk chemical structure and the properties of SFAC. The surface functionalization process is governed by discharge gas, discharge source, discharge efficiency and discharge time. The majority of researchers have utilized oxygen plasma as the discharge gas. However, ammonia, carbon dioxide, atmospheric air, specific gases such as chlorine and hydrogen sulfide, and neutral gases such as nitrogen and argon have also been used as the discharge gas. These plasma activations were conducted under different power conditions (W to kW) and varying treatment times (seconds to hours) using different plasma sources such as dielectric barrier discharge (DBD), arc, radio frequency (RF) and microwave (MW) for the surface functionalization. Most of the researchers have experienced both positive and negative co-relationships between principal parameters and surface functional groups (SFGs), surface area, porosity and other surface features such as roughness and hydrophilicity. However, a comprehensive review on the effects of these parameters on the final material properties is lacking. Therefore, this Review focuses on the recent developments in the utilization of plasma as a surface activation technique for activated carbon. Furthermore, an in-depth analysis of the relationship between experimental parameters and the resultant surface features of activated carbon is carried out and discussed. The functionalization mechanisms related to plasma activation have also been illustrated. The aging effect, which negatively impacts surface functionalized activated carbon, is also emphasized. Finally, the recent advances in applications of SFAC, challenges and future perspectives are discussed in detail.

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment.

Electrospinning, being a versatile and straightforward method to produce nanofiber membranes, has shown significant advancement in recent years. On account of the unique properties such as high surface area, high porosity, mechanical strength, and controllable surface morphologies, electrospun nanofiber membranes have been found to have a great potential in many disciplines. Pure electrospun fiber mats modified with different techniques of surface modification and additive incorporation have exhibited enhanced properties compared to traditional membranes and are even better than the as-prepared electrospun membranes. In this review, we have summarized recently developed electrospun nanohybrids fabricated by the incorporation of functional specific nanosized additives to be used in various water remediation membrane techniques. The adsorption, filtration, photocatalytic, and bactericidal capabilities of the hybrid membranes in removing common major water pollutants such as metal ions, dyes, oils, and biological pollutants have been discussed. Finally, an outlook on the future research pathways to fill the gaps existing in water remediation have been suggested.

Reduced Crystalline Biofilm Formation on Superhydrophobic Silicone Urinary Catheter Materials.

Crystalline biofilm formation in indwelling urinary catheters is a serious health problem as it creates a barrier for antibacterial coatings. This emphasizes the failure of antibacterial coatings that do not have a mechanism to reduce crystal deposition on catheter surfaces. In this study, trifluoropropyl spray-coated polydimethylsiloxane (TFP-PDMS) has been employed as an antibiofilm forming surface without any antibacterial agent. Here, TFP was coated on half-cured PDMS using the spray coating technique to obtain a durable superhydrophobic coating for a minimum five cycles of different sterilization methods. The crystalline biofilm-forming ability of Proteus mirabilis in artificial urine, under static and flow conditions, was assessed on a TFP-PDMS surface. In comparison to the commercially available silver-coated latex and silicone catheter surfaces, TFP-PDMS displayed reduced bacterial attachment over 14 days. Moreover, the elemental analysis determined by atomic absorption spectroscopy and energy-dispersive X-ray analysis revealed that the enhanced antibiofilm forming ability of TFP-PDMS was due to the self-cleaning activity of the surface. We believe that this modified surface will significantly reduce biofilm formation in indwelling urinary catheters and further warrant future clinical studies.

Mechanistic Insights into Interactions at Urea-Hydroxyapatite Nanoparticle Interface.

Development of controlled release biomolecules by surface modification of hydroxyapatite nanoparticles has recently gained popularity in the areas of bionanotechnology and nanomedicine. However, optimization of these biomolecules for applications such as drug delivery, nutrient delivery requires a systematic understanding of binding mechanisms and interfacial kinetics at the molecular level between the nanomatrix and the active compound. In this research, urea is used as a model molecule to investigate its interactions with two morphologically different thin films of hydroxyapatite nanoparticles. These thin films were fabricated on quartz crystal piezoelectric sensors to selectively expose Ca2+ and PO43- sites of hydroxyapatite. Respective urea adsorption and desorption on both of these sites were monitored in situ and in real time in the phosphate buffer solution that mimics body fluids. The measured kinetic parameters, which corroborate structural predisposition for controlled release, show desorption rates that are one-tenth of the adsorption rates on both surfaces. Furthermore, the rate of desorption from the PO43- site is one-half the rate of desorption from the Ca2+ site. The Hill kinetic model was found to satisfactorily fit data, which explains cooperative binding between the hydroxyapatite nanoparticle thin film and urea. Fourier transform infrared spectra and X-ray photoemission spectra of the urea adsorbed on the above surfaces confirm the cooperative binding. It also elucidates the different binding mechanisms between urea and hydroxyapatite that contribute to the changes in the interfacial kinetics. These findings provide valuable information for structurally optimizing hydroxyapatite nanoparticle surfaces to control interfacial kinetics for applications in bionanotechnology and nanomedicine.

A Novel Green Approach to Synthesize Curcuminoid-Layered Double Hydroxide Nanohybrids: Adroit Biomaterials for Future Antimicrobial Applications.

Thermal instability, photodegradation, and poor bioavailability of natural active ingredients are major drawbacks in developing effective natural product-based antimicrobial formulations. These inherited issues could be fruitfully mitigated by the introduction of natural active ingredients into various nanostructures. This study focuses on the development of a novel green mechanochemical synthetic route to incorporate curcuminoids into Mg-Al-layered double hydroxides. The developed one-pot and scalable synthetic approach makes lengthy synthesis procedures using toxic solvents redundant, leading to improved energy efficiency. The hydrotalcite-shaped nanohybrids consist of surface and interlayer curcuminoids that have formed weak bonds with layered double hydroxides as corroborated by X-ray diffractograms, X-ray photoelectron spectra, and Fourier transmission infrared spectra. The structural and morphological properties resulted in increased thermal stability of curcuminoids. Slow and sustained release of the curcuminoids was observed at pH 5.5 for a prolonged time up to 7 h. The developed nanohybrids exhibited zeroth-order kinetics, favoring transdermal application. Furthermore, the efficacy of curcuminoid incorporated LDHs (CC-LDH) as an anticolonization agent was investigated against four wound biofilm-forming pathogens, Pseudomonas aeruginosa, Staphylococcus aureus, methicillin-resistant Staphyloccocus aureus, and Candida albicans, using a broth dilution method and an in vitro biofilm model system. Microbiological studies revealed a 54-58% reduction in biofilm formation ability of bacterial pathogens in developed nanohybrids compared to pure curcuminoids. Therefore, the suitability of these green-chemically synthesized CC-LDH nanohybrids for next-generation antimicrobial applications with advanced dermatological/medical properties is well established.

Facile Mechanochemical Approach To Synthesizing Edible Food Preservation Coatings Based On Alginate/Ascorbic Acid-Layered Double Hydroxide Bio-Nanohybrids.

A bionanohybrid based on ascorbic acid-intercalated layered double hydroxides (LDHs) was synthesized using a facile and novel mechanochemical grinding technique, and its efficacy as an edible food coating is reported. Ascorbic acid-intercalated Mg-Al-LDHs (AA-LDHs) are synthesized using a green water-assisted grinding approach. The successful synthesis of the mechanochemically ground AA-LDHs was confirmed by the shifts observed in the basal peaks of the LDHs based on a powder X-ray diffraction, changes in the positions of vibrational frequencies of ascorbic acid based on Fourier Transform Infrared Spectroscopy, and significant changes in the intensity and peak positions of the core-shell bands based on X-ray photoelectron spectroscopy. The resulting nanohybrid further demonstrates thermal stability in thermogravimetric and derivative thermogravimetric analysis. Transmission electron microscopy images of the mechanochemically synthesized AA-LDHs reveal a plate-like morphology, which is a characteristic of the hydrotalcite-like structure. In a novel application, an edible coating was prepared by blending the AA-LDHs into a biocompatible alginate matrix, and the coating was developed on freshly plucked strawberries using the dip-coating method. In order to evaluate the efficacy of the coating, the total phenolic content, pH, microbial growth, weight loss, titratable acidity, and ascorbic acid content were monitored in the coated and uncoated fruits for a period of 18 days. The results reveal that the shelf life of strawberries increases from 9 days to 15 days for the nanohybrid coated fruits, suggesting the potential food preservation applications of the nanohybrid.

Effect of natural curcuminoids-intercalated layered double hydroxide nanohybrid against Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus faecalis: A bactericidal, antibiofilm, and mechanistic study.

The study aimed to determine the antibacterial/antibiofilm effect and mechanism of interaction of curcuminoids-intercalated Mg/Al layered double hydroxide (curcuminoids-LDH) against three different bacteria. Antimicrobial effect of curcuminoids-LDH nanohybrid was investigated against P. aeruginosa, S. aureus, and E. faecalis (for both standard strains and clinical isolates), using agar well diffusion method. Minimum inhibitory concentrations (MIC) of planktonic bacteria were determined using the broth microdilution method. MIC of biofilms (MBIC50 ) and killing time for 48 hr matured biofilms were determined by MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Scanning electron microscopy (SEM) was used to determine pre- and postexposure architecture of biofilms. The mechanism of the antibiofilm activity of curcuminoids-LDH was determined using UV-visible spectroscopy. All tested bacteria had given a zone of inhibition in the presence of curcuminoids-LDH. The MIC values were 0.200 g/ml for P. aeruginosa, 0.025 g/ml for S. aureus, and 0.100 g/ml for E. faecalis. The 48 hr matured biofilms were reduced by curcuminoids-LDH with an MBIC50 of 0.100 g/ml. The minimum time to achieve MBIC50 was 3 hr, and the reduction was constant until 48 hr. SEM images showed a significant reduction of biofilm cell density and exopolymer matrics for all biofilms in the presence of curcuminoids-LDH. UV-visible studies revealed the antibiofilm activity of curcuminoids-LDH as due to the auto-oxidation of curcuminoids. The oxidation products are more limited in both product concentration per unit time and the variety of products, compared to pure curcuminoids, resulting in sharper UV-visible peaks than in the case of the latter. Curcuminoids-LDH has a potential antibacterial activity against P. aeruginosa, S. aureus, and E. faecalis. An antibiofilm activity has been achieved within 3 hr of the treatment. Curcuminoids released from the LDH showed the antibacterial activity due to oxidation products interfering with bacterial cell functions, and also encapsulation in the LDH causes curcuminoids to exhibit the activity in a persistent manner compared to pure curcuminoids.

Influence of Laboratory Culture Media on in vitro Growth, Adhesion, and Biofilm Formation of Pseudomonas aeruginosa and Staphylococcus aureus.

OBJECTIVE: Pseudomonas aeruginosa and Staphylococcus aureus dual-species biofilm infections are notoriously difficult to manage. This study aimed at investigating the influence of four different culture media on the planktonic growth, adhesion, and biofilm formation of P. aeruginosa and S. aureus. MATERIALS AND METHODS: We monitored four different culture media including Nutrient Broth, Brain Heart Infusion (BHI) broth, Luria-Bertani broth, and RPMI 1640 medium on the planktonic growth, adhesion, and biofilm formation of P. aeruginosa (ATCC 27853) and S. aureus (ATCC 25923) using MTT assay and scanning electron microscopy (SEM). RESULTS: The most robust growth of the mono- and dual-species cultures was noted in BHI broth. On the contrary, RPMI 1640 medium promoted maximal initial adhesion of both the mono- and dual-species, but BHI broth fostered the maximal biofilm growth. SEM images showed profuse extracellular polysaccharide production in biofilms, particularly in coculture, in BHI medium. CONCLUSION: Our data demonstrate that BHI broth, relative to the other tested media, is the most conducive for in vitro evaluation of biofilm and planktonic growth kinetics of these two pathogens, both in mono- and coculture.

Rice bran nanofiber composites for stabilization of phytase.

This study explores the potential application of rice bran (agro waste) to nano-encapsulate phytase, which is a thermally unstable biologically active enzyme. Rice bran was converted to nanofibers (20-50 nm in diameter) using electrospinning. After optimizing the pH, viscosity, voltage and the distance between electrodes for electrospinning, phytase enzyme was encapsulated and the fibers were cross-linked using sodium tripolyphosphate. Thermal stability of phytase enzyme was improved by 90 °C when they are encapsulated and cross-linked with sodium tripolyphosphate. The activity of the phytase enzyme was monitored at different temperatures. The activity of the pure enzyme was lost at 80 °C while the enzyme encapsulated into nanofibers demonstrated the activity up to 170 °C. This study opens up many opportunities for nanotechnology value addition to many waste materials and also to improve the properties of a range of biomaterials through a sustainable approach.

Effect of Citric Acid Surface Modification on Solubility of Hydroxyapatite Nanoparticles.

Worldwide, there is an amplified interest in nanotechnology-based approaches to develop efficient nitrogen, phosphorus, and potassium fertilizers to address major challenges pertaining to food security. However, there are significant challenges associated with fertilizer manufacture and supply as well as cost in both economic and environmental terms. The main issues relating to nitrogen fertilizer surround the use of fossil fuels in its production and the emission of greenhouse gases resulting from its use in agriculture; phosphorus being a mineral source makes it nonrenewable and casts a shadow on its sustainable use in agriculture. This study focuses on development of an efficient P nutrient system that could overcome the inherent problems arising from current P fertilizers. Attempts are made to synthesize citric acid surface-modified hydroxyapatite nanoparticles using wet chemical precipitation. The resulting nanohybrids were characterized using powder X-ray diffraction to extract the crystallographic data, while functional group analysis was done by Fourier transform infrared spectroscopy. Morphology and particle size were studied using scanning electron microscopy along with elemental analysis using energy-dispersive X-ray diffraction spectroscopy. Its effectiveness as a source of P was investigated using water release studies and bioavailability studies using Zea mays as the model crop. Both tests demonstrated the increased availability of P from nanohybrids in the presence of an organic acid compared with pure hydroxyapatite nanoparticles and rock phosphate.

The Effect of Nutritive and Non-Nutritive Sweeteners on the Growth, Adhesion, and Biofilm Formation of Candida albicans and Candida tropicalis.

OBJECTIVE: To determine the effect of glucose, sucrose, and saccharin on growth, adhesion, and biofilm formation of Candida albicans and Candida tropicalis. MATERIALS AND METHODS: The growth rates of mono-cultures of planktonic C. albicans and C. tropicalis and 1:1 mixed co-cultures were determined in yeast nitrogen broth supplemented with 5% (30 mM) and 10% (60 mM) glucose, sucrose, and saccharin, using optical density measurements at 2-h intervals over a 14-h period. Adhesion and biofilm growth were performed and the growth quantified using a standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The biofilm architecture was visualized using scanning electron microscopy. One- and two-way analysis of variance (ANOVA) was performed to analyse the differences among multiple means. RESULTS: The highest planktonic growth was noted in 5% glucose after 14 h (p < 0.05). No significant planktonic growth was observed in either concentration of saccharin. Both the concentrations of glucose and sucrose elicited significantly increased adhesion from MTT activity of 0.017 to >0.019 in mono- as well as co-cultures (p < 0.05), whilst the lower concentration of saccharin significantly dampened the adhesion. Maximal biofilm growth was observed in both species with the lower concentration of sucrose (5%), although a similar concentration of saccharin abrogated biofilm development: the highest MTT value (>0.35) was obtained for glucose and the lowest (>0.15) for saccharin. CONCLUSION: In this study, glucose and sucrose accelerated the growth, adhesion, and biofilm formation of Candida species. However, the non-nutritive sweetener saccharin appeared to dampen, and in some instances suppress, these virulent attributes of Candida.

Urea-Hydroxyapatite Nanohybrids for Slow Release of Nitrogen.

While slow release of chemicals has been widely applied for drug delivery, little work has been done on using this general nanotechnology-based principle for delivering nutrients to crops. In developing countries, the cost of fertilizers can be significant and is often the limiting factor for food supply. Thus, it is important to develop technologies that minimize the cost of fertilizers through efficient and targeted delivery. Urea is a rich source of nitrogen and therefore a commonly used fertilizer. We focus our work on the synthesis of environmentally benign nanoparticles carrying urea as the crop nutrient that can be released in a programmed manner for use as a nanofertilizer. In this study, the high solubility of urea molecules has been reduced by incorporating it into a matrix of hydroxyapatite nanoparticles. Hydroxyapatite nanoparticles have been selected due to their excellent biocompatibility while acting as a rich phosphorus source. In addition, the high surface area offered by nanoparticles allows binding of a large amount of urea molecules. The method reported here is simple and scalable, allowing the synthesis of a urea-modified hydroxyapatite nanohybrid as fertilizer having a ratio of urea to hydroxyapatite of 6:1 by weight. Specifically, a nanohybrid suspension was synthesized by in situ coating of hydroxyapatite with urea at the nanoscale. In addition to the stabilization imparted due to the high surface area to volume ratio of the nanoparticles, supplementary stabilization leading to high loading of urea was provided by flash drying the suspension to obtain a solid nanohybrid. This nanohybrid with a nitrogen weight of 40% provides a platform for its slow release. Its potential application in agriculture to maintain yield and reduce the amount of urea used is demonstrated.

Culture media profoundly affect Candida albicans and Candida tropicalis growth, adhesion and biofilm development

As there are sparse data on the impact of growth media on the phenomenon of biofilm development for Candida we evaluated the efficacy of three culture media on growth, adhesion and biofilm formation of two pathogenic yeasts, Candida albicans and Candida tropicalis. The planktonic phase yeast growth, either as monocultures or mixed cultures, in sabouraud dextrose broth (SDB), yeast nitrogen base (YNB), and RPMI 1640 was compared, and adhesion as well as biofilm formation were monitored using MTT and crystal violet (CV) assays and scanning electron microscopy. Planktonic cells of C. albicans, C. tropicalis and their 1:1 co-culture showed maximal growth in SDB. C. albicans/C. tropicalis adhesion was significantly facilitated in RPMI 1640 although the YNB elicited the maximum growth for C. tropicalis. Similarly, the biofilm growth was uniformly higher for both species in RPMI 1640, and C. tropicalis was the slower biofilm former in all three media. Scanning electron microscopy images tended to confirm the results of MTT and CV assay. Taken together, our data indicate that researchers should pay heed to the choice of laboratory culture media when comparing relative planktonic/biofilm growth of Candida. There is also a need for standardisation of biofilm development media so as to facilitate cross comparisons between laboratories.

Culture media profoundly affect Candida albicans and Candida tropicalis growth, adhesion and biofilm development.

As there are sparse data on the impact of growth media on the phenomenon of biofilm development for Candida we evaluated the efficacy of three culture media on growth, adhesion and biofilm formation of two pathogenic yeasts, Candida albicans and Candida tropicalis. The planktonic phase yeast growth, either as monocultures or mixed cultures, in sabouraud dextrose broth (SDB), yeast nitrogen base (YNB), and RPMI 1640 was compared, and adhesion as well as biofilm formation were monitored using MTT and crystal violet (CV) assays and scanning electron microscopy. Planktonic cells of C. albicans, C. tropicalis and their 1:1 co-culture showed maximal growth in SDB. C. albicans/C. tropicalis adhesion was significantly facilitated in RPMI 1640 although the YNB elicited the maximum growth for C. tropicalis. Similarly, the biofilm growth was uniformly higher for both species in RPMI 1640, and C. tropicalis was the slower biofilm former in all three media. Scanning electron microscopy images tended to confirm the results of MTT and CV assay. Taken together, our data indicate that researchers should pay heed to the choice of laboratory culture media when comparing relative planktonic/biofilm growth of Candida. There is also a need for standardisation of biofilm development media so as to facilitate cross comparisons between laboratories.

Natural curcuminoids encapsulated in layered double hydroxides: a novel antimicrobial nanohybrid.

Currently, there is an increased scientific interest to discover plant based drug formulations with improved therapeutic potential. Among the cornucopia of traditional medicinal plants, Curcuma longa rhizomes have been used as a powerful antibacterial and antifungal agent. However, its practical applications are limited due to its instability under thermal and UV radiation and its low bioavailability and the extensive procedures needed for isolation. This study focuses on exploring the potential of nanotechnology-based approaches to stabilize the natural curcuminoids, the major active components in turmeric without the need for its isolation, and to evaluate the release characteristics, stability and antimicrobial activity of the resulting nanohybrids. Natural curcuminoids were selectively encapsulated into nanolayers present in Mg-Al-layered double hydroxides (LDHs) using a method that avoids any isolation of the curcuminoids. The products were characterized using solid state techniques, while thermal and photo-stability were studied using thermogravimetric analysis (TGA) and UV exposure data. The morphological features were studied using scanning electron microscope (SEM) and transmission electron microscope (TEM). Drug release characteristics of the nanohybrid were quantitatively monitored under pH 3 and 5, and therapeutic potentials were assessed by using distinctive kinetic models. Finally, the antimicrobial activity of curcuminoids-LDH was tested against three bacterial and two fungal species. Powder X-ray diffraction, Fourier transform infra-red spectroscopy, SEM and TEM data confirmed the successful and selective encapsulation of curcuminoids in the LDH, while the TGA and UV exposure data suggested the stabilization of curcuminoids within the LDH matrix. The LDH demonstrated a slow and a sustained release of the curcuminoids in an acidic medium, while it was active against the three bacteria and two fungal species used in this study, suggesting its potential applications in pharmaceutical industry.Graphical abstractSynthesis of Curcuminoid-LDH by coprecipitation method and the slow release process of curcuminoids from LDH matrix.

Slow release anti-fungal skin formulations based on citric acid intercalated layered double hydroxides nanohybrids.

BACKGROUND: During the past few decades, the occurrence of superficial fungal infections has rapidly increased. As the fungal infections take longer time to get cured, concepts such as designing drugs with extended persistence and controlled release have gained attention. In this context, nanotechnology has been identified as the latest technological revolution which has opened up new pathways for designing new therapeutic materials. Out of the many available nano-structures layered double hydroxides have gained increased scientific attention in applications as slow and controlled release drug formulations. This study focuses on the encapsulation of citric acid which has anti-fungal properties into a Mg-Al- layered double hydroxide (LDH) in order to be used as slow release topical skin formulations. RESULTS: Citrate ions were encapsulated into Mg-Al LDH using one step co-precipitation reaction. The successful intercalation of citrate ions into the layered structure has been proved referring to the expansion in the interlayer spacing as observed by the shift in the basal peak of the powder X-ray diffraction pattern. Fourier transform infra-red spectroscopy data suggests the change in the electron density around the carboxylate groups of the citrate ion thus providing evidences for formation of encapsulated hybrid composite. The resulting nanohybrid has been then, introduced into a general body cream formulation containing cocoa-butter. Both citrate LDH and the resulting body cream formulations demonstrated prolonged slow release characteristics up to 8 h in aqueous medium under different pH values (3, 4, and 5) compared to quick and fast release of pure citric acid. It was observed that the slow reelase was most efficient at low pH values. The encapsulation between the nano-layers and citrate ions are the key to the slow release characteristics. The body cream has been tested for the anti-fungal activity against three common Candida species (C. albicans, C. glabrata, C. tropicalis). The novel nanohybrid has shown an improved activity and slow release characteristics up to 48 h against the C. albicans and C. glabrata but not for C. tropicalis. CONCLUSION: The study confirms that the citrate ion intercalated LDHs have the potential for use in future slow release antifungal drug formulation. Graphical AbstractSlow release nanohybrids based on citrate intercalated layered double hydroxides.