The Togo national proficiency test pilot programme for basic clinical chemistry tests.

Background: A national proficiency test (PT) programme is not currently implemented in most low-income countries. However, participation in such PT programmes assists improves test performance and result accuracy. Objective: This study assessed how well 11 government hospital laboratories performed 18 basic clinical chemistry tests and identified areas needing improvement. Methods: A cross-sectional study was carried out by the Division of Laboratories of the Ministry of Health of Togo from 01 July 2016 to 31 December 2016. The test performance was evaluated using panels provided by One World Accuracy, Canada (Vancouver). The Clinical Laboratory Improvement Amendments criteria were used in evaluating the laboratories, and their success rates were compared with the World Health Organization Regional Office for Africa's target of 80%. Results: The overall rate of acceptable results at the laboratories was over 80% for glucose, alanine aminotransferase, aspartate aminotransferase, gamma-glutamyltransferase, alkaline phosphatase and triglycerides tests. The laboratories using fully automated spectrophotometers had an acceptable results rate of 89% (p = 0.001). The overall performance of the laboratories by cycles varied from 71% to 82%. Conclusion: This national PT programme identified the tests, which laboratories must improve their performance (urea, creatinine, uric acid, bilirubin, cholesterol, total protein, calcium, magnesium, phosphorus). It demonstrated the need for the use of routine appropriate internal quality control in all laboratories. The proficiency test programme should be extended to all clinical laboratories and target all biology disciplines.

The Togo national proficiency test pilot programme for basic clinical chemistry tests

Background: A national proficiency test (PT) programme is not currently implemented in most low-income countries. However, participation in such PT programmes assists improves test performance and result accuracy.Objective: This study assessed how well 11 government hospital laboratories performed 18 basic clinical chemistry tests and identified areas needing improvement.Methods: A cross-sectional study was carried out by the Division of Laboratories of the Ministry of Health of Togo from 01 July 2016 to 31 December 2016. The test performance was evaluated using panels provided by One World Accuracy, Canada (Vancouver). The Clinical Laboratory Improvement Amendments criteria were used in evaluating the laboratories, and their success rates were compared with the World Health Organization Regional Office for Africa's target of 80%.Results: The overall rate of acceptable results at the laboratories was over 80% for glucose, alanine aminotransferase, aspartate aminotransferase, gamma-glutamyltransferase, alkaline phosphatase and triglycerides tests. The laboratories using fully automated spectrophotometers had an acceptable results rate of 89% (p = 0.001). The overall performance of the laboratories by cycles varied from 71% to 82%.Conclusion: This national PT programme identified the tests, which laboratories must improve their performance (urea, creatinine, uric acid, bilirubin, cholesterol, total protein, calcium, magnesium, phosphorus). It demonstrated the need for the use of routine appropriate internal quality control in all laboratories. The proficiency test programme should be extended to all clinical laboratories and target all biology disciplines

The use of dried tube specimens of Plasmodium falciparum in an external quality assessment programme to evaluate health worker performance for malaria rapid diagnostic testing in healthcare centres in Togo.

BACKGROUND: The use of rapid diagnostic tests (RDTs) to diagnose malaria is common in sub-Saharan African laboratories, remote primary health facilities and in the community. Currently, there is a lack of reliable methods to ascertain health worker competency to accurately use RDTs in the testing and diagnosis of malaria. Dried tube specimens (DTS) have been shown to be a consistent and useful method for quality control of malaria RDTs; however, its application in National Quality Management programmes has been limited. METHODS: A Plasmodium falciparum strain was grown in culture and harvested to create DTS of varying parasite density (0, 100, 200, 500 and 1000 parasites/µL). Using the dried tube specimens as quality control material, a proficiency testing (PT) programme was carried out in 80 representative health centres in Togo. Health worker competency for performing malaria RDTs was assessed using five blinded DTS samples, and the DTS were tested in the same manner as a patient sample would be tested by multiple testers per health centre. RESULTS: All the DTS with 100 parasites/µl and 50% of DTS with 200 parasites/µl were classified as non-reactive during the pre-PT quality control step. Therefore, data from these parasite densities were not analysed as part of the PT dataset. PT scores across all 80 facilities and 235 testers was 100% for 0 parasites/µl, 63% for 500 parasites/µl and 93% for 1000 parasites/µl. Overall, 59% of the 80 healthcare centres that participated in the PT programme received a score of 80% or higher on a set of 0, 500 and 1000 parasites/ µl DTS samples. Sixty percent of health workers at these centres recorded correct test results for all three samples. CONCLUSIONS: The use of DTS for a malaria PT programme was the first of its kind ever conducted in Togo. The ease of use and stability of the DTS illustrates that this type of samples can be considered for the assessment of staff competency. The implementation of quality management systems, refresher training and expanded PT at remote testing facilities are essential elements to improve the quality of malaria diagnosis.