Application of equilibrium passive sampling to assess the influence of anthropogenic activities and bioturbation on the distribution of hydrophobic organic chemicals in North Sea sediment cores.

The pollution state in the German Bight was investigated by determination of pollutant concentrations of sediment samples using equilibrium passive sampling. Polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAH) were determined in the pore water of North Sea sediment. The freely dissolved pore water concentration (Cfree) was measured applying Solid Phase Microextraction (SPME) by using PDMS-coated glass fibers. The obtained results show that the North Sea contamination level with the investigated pollutants is relatively low. However, the stations close to the sediment-dumping site were higher contaminated. A macrofauna analysis showed that bioturbation activities were mostly present in the upper sediment layers, but a direct bioturbation influence on the sediment concentration distribution could not be shown. Overall, the contamination load was below baseline toxicity, but considering that several other priority pollutants will also make a contribution to the baseline toxicity, it can be counted as relatively high.

Passive dosing: Assessing the toxicity of individual PAHs and recreated mixtures to the microalgae Raphidocelis subcapitata.

Risk assessment of hydrophobic organic compounds (HOCs) is difficult because maintaining a well-defined exposure during aquatic toxicity testing is challenging due to the limited water solubility and various loss processes such as volatilization, biodegradation and sorption. Passive dosing techniques help to overcome these challenges by providing a well-controlled and solvent-free exposure. In this study, the algal growth inhibition test (DIN EN ISO 8692) was converted into a miniaturized passive dosing setting. For this purpose, biocompatible O-rings were used as substance reservoirs and loaded with polycyclic aromatic hydrocarbons (PAHs). The growth inhibition of the microalgae Raphidocelis subcapitata induced by single PAHs (log KOW 3.24-5.91) was investigated. In addition, recreated PAH mixtures were tested representing field compositions of the pore water North Sea sediments. Some of the single PAHs revealed strong growth inhibiting effects on the algal growth, while the recreated mixture compositions had slightly lower effect on the growth inhibition in the highest concentrations. Overall, the toxicity of the PAHs generally increased with the maximum chemical activities (amax) of the PAHs and the inhibition data could be fitted with one maximum chemical activity response curve. Therefore, the miniaturized passive dosing approach appears as a promising practical and economical method that can be used for toxicity testing of the different trophic levels to improve comprehensive risk assessment.

Equilibrium passive sampling: A novel approach to determine internal tissue concentrations of hydrophobic organic compounds in biota.

Equilibrium passive sampling has been applied in numerous abiotic environmental matrices. This approach was extended to biological material. In this work, a passive equilibrium sampling method for the measurement of HOCs in biota was developed as an innovative alternative because classical exhaustive extraction techniques are time-consuming and error-prone. The newly developed method is based on the well-proven SPME fiber method for sediment. Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) were used as model lipophilic organic pollutants. Partition coefficients of PAHs and PCBs between the lugworm tissue and the PDMS sampling phase were determined. Polydimethylsiloxane (PDMS) coated glass fibers were directly inserted in homogenized lugworm tissue and glass fibers were analyzed using gas chromatography coupled to mass spectrometry. The method application on lugworms from tidal sand flats near Wilhelmshaven showed that the mean body residue values of PCBs (4 µg g-1) and PAHs (256 µg g-1) were about five times higher for PCBs and more than 22 times higher for PAHs compared to literature data for the North Sea area. This high level of contamination might be a consequence of the oil processing refinery located in direct proximity to the sampling site. This novel approach of applying the SPME method to biota will make biological monitoring more effective and holistic, because seasonally and area-wide changes in all environmental compartments can be recorded quickly.

Sediment Remediation Using Activated Carbon: Effects of Sorbent Particle Size and Resuspension on Sequestration of Metals and Organic Contaminants.

Thin-layer capping using activated carbon has been described as a cost-effective in situ sediment remediation method for organic contaminants. We compared the capping efficiency of powdered activated carbon (PAC) against granular activated carbon (GAC) using contaminated sediment from Oskarshamn harbor, Sweden. The effects of resuspension on contaminant retention and cap integrity were also studied. Intact sediment cores were collected from the outer harbor and brought to the laboratory. Three thin-layer caps, consisting of PAC or GAC mixed with clay or clay only, were added to the sediment surface. Resuspension was created using a motor-driven paddle to simulate propeller wash from ship traffic. Passive samplers were placed in the sediment and in the water column to measure the sediment-to-water release of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and metals. Our results show that a thin-layer cap with PAC reduced sediment-to-water fluxes of PCBs by 57% under static conditions and 91% under resuspension. Thin-layer capping with GAC was less effective than PAC but reduced fluxes of high-molecular weight PAHs. Thin-layer capping with activated carbon was less effective at retaining metals, except for Cd, the release of which was significantly reduced by PAC. Resuspension generally decreased water concentrations of dissolved cationic metals, perhaps because of sorption to suspended sediment particles. Sediment resuspension in treatments without capping increased fluxes of PCBs with log octanol-water partitioning coefficient (KOW ) > 7 and PAHs with log KOW of 5-6, but resuspension reduced PCB and PAH fluxes through the PAC thin-layer cap. Overall, PAC performed better than GAC, but adverse effects on the benthic community and transport of PAC to nontarget areas are drawbacks that favor the use of GAC. Environ Toxicol Chem 2022;41:1096-1110. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.