The knotless cinch-bridge technique for delaminated rotator cuff tears leads to a high healing rate and a more favorable short-term clinical outcome than suture-bridge repair.

PURPOSE: To compare functional outcomes and magnetic resonance image (MRI) tendon integrity following either the suture bridge or the knotless cinch-bridge technique used for arthroscopic double-layer rotator cuff repair. METHODS: 37 prospectively enrolled patients (46-76 years), who were treated with arthroscopic double-layer rotator cuff repair (group 1: suture bridge n = 20, group 2: cinch bridge n = 17) were clinically and radiographically assessed before and at an average of 24.0 ± 4.7 months after the procedure. Shoulder function was evaluated by the constant score (CS), range of motion, and various patient-related scores. Repaired tendon integrity was evaluated by MRI. Peri- and postoperative complications were recorded. RESULTS: All functional and patient-related scores significantly improved from pre- to postoperative. Significantly better postoperative CS (P = 0.037), flexion (P < 0.001), and abduction (P = 0.009) were detected after arthroscopic cinch compared to suture-bridge repair. The mean CS improvements from baseline to follow-up were not significantly different between the groups (n.s.). Patient-related scores did not show any statistical significant differences. The MRI healing rate following arthroscopic double-layer repair with the suture- and cinch-bridge technique was 95% and 94%, respectively. Fatty infiltration regarding the supraspinatus and infraspinatus increased in 55% and 35% (group 1) and in 53% and 48% (group 2), respectively. Muscle hypotrophy remained stable in all patients. Overall, 92% of the patients were very satisfied or satisfied with the procedure. No complications were detected. CONCLUSIONS: Arthroscopic knotless double-layer rotator cuff repair with the cinch-bridge technique showed higher CS, forward flexion, and abduction values, as well as similar patient-related short-term outcome and MRI integrity compared to the suture-bridge technique. These results highlight the potential importance of less tendon strangulation for better clinical short-term outcome. LEVEL OF EVIDENCE: Level II, prospective comparative study.

Double-Layer Rotator Cuff Repair: Anatomic Reconstruction of the Superior Capsule and Rotator Cuff Improves Biomechanical Properties in Repairs of Delaminated Rotator Cuff Tears.

BACKGROUND: Delamination in rotator cuff tears has been identified as a prognostic factor for negative outcome after repair, with a reported prevalence between 38% and 88%. PURPOSE: To compare biomechanical properties of 3 repair techniques for delaminated rotator cuff tears. STUDY DESIGN: Controlled laboratory study. METHODS: Eighteen fresh-frozen cadaveric shoulders were used to evaluate rotator cuff footprint reconstruction, contact area and pressure, displacement under cyclical loading, and load to failure of 3 double-row repair configurations: double-row suture repair with medial row knots (medially knotted bridge, mkB); knotless double-row repair using suture tapes (knotless bridge, klB); and knotless double-row, double-layer-specific repair (double-layer, DL). Dynamic pressure sensors were used to assess contact patterns at the footprint region in 0°, 30°, and 60° of glenohumeral abduction and 5 rotational positions (0°, 30° of internal rotation, 30° of external rotation, 60° of internal rotation, 60° of external rotation). Optical markers were used to document whole tendon and individual layer displacement after rotator cuff repair under cyclical loading for 200 cycles (10 N to 100 N at 1 Hz). Specimens were then loaded monotonically to failure at a rate of 33 mm/min. RESULTS: Mean contact area and footprint restoration were highest in the DL group at 60° of glenohumeral abduction for all rotational positions (mkB mean ± SD, 195.4 ± 54.3 mm2, 66.7% ± 19.7%; klB, 250.6 ± 34.9 mm2, 76.2% ± 10.3%; DL, 318.4 ± 36.6 mm2, 109.1% ± 24.0%; P < .001). The double-layer-specific repair showed the least displacement under cyclical loading (mkB mean ± SD, 0.53 ± 0.18 mm; klB, 0.79 ± 0.37 mm; DL, 0.31 ± 0.24 mm; P = .029), most closely resembling the native tendon. Peak loads at failure were comparable between repair groups (mkB mean ± SD, 366.92 ± 70.59 N; klB, 280.05 ± 77.66 N; DL, 398.35 ± 109.04 N; P = .083). CONCLUSION: Anatomic restoration of the superior capsular and tendon insertion in delaminated rotator cuff tears with a double-layer-specific repair configuration demonstrated superior footprint restoration with increasing abduction, while providing construct displacement comparable to the native tendon under cyclical loading. Peak load at failure was comparable between repair constructs. CLINICAL RELEVANCE: The prevalence and clinical importance of delaminated rotator cuff tears have long been underestimated. Anatomically correct individual reconstruction of the superior capsule and rotator cuff could restore near-native biomechanics and potentially reduce the risk of rotator cuff repair failure.

Radiological changes do not influence clinical mid-term outcome in stemless humeral head replacements with hollow screw fixation: a prospective radiological and clinical evaluation.

BACKGROUND: Stemless shoulder arthroplasty is a fairly new concept. Clinical and radiological follow-up is essential to prove implant safety and concept. This prospective single-centre study was performed to evaluate the influence of radiological changes on clinical mid-term outcome following stemless humeral head replacement with hollow screw fixation. METHODS: Short- and mid-term radiological and clinical evaluations were performed in 73 consecutive shoulders treated mainly for idiopathic and posttraumatic osteoarthritis with stemless humeral head arthroplasty including 40 hemi- (HSA) and 33 total shoulder arthroplasties (TSA). Operating times of stemless implantations were compared to 110 stemmed anatomical shoulder prostheses. Appearances of humeral radiolucencies or radiological signs of osteolysis or stress shielding were assessed on standardized radiographs. Patients' clinical outcome was evaluated using the Constant score and patients' satisfaction was documented. RESULTS: Radiological changes, detected in 37.0%, did not affect clinical outcome. Constant scores significantly improved from baseline to short and mid-term follow-up (p < 0.001). The majority of patients (96.2%) were satisfied with the procedure. No loosening of the humeral head component was detected during a mean follow-up of 58 months. Operating times were significantly shorter with stemless compared to stemmed implants (p < 0.001). CONCLUSIONS: Clinical mid-term outcome after stemless humeral head replacement was not affected by radiological changes. TRIAL REGISTRATION: The institutional review board (St. Vincent Hospital Vienna; 201212_EK01; date of issue: 11.12.2012) approved the study. The trial was registered at ClinicalTrials.gov ( NCT02754024 ). Retrospective registration.

Longitudinal Long-term Magnetic Resonance Imaging and Clinical Follow-up After Single-Row Arthroscopic Rotator Cuff Repair: Clinical Superiority of Structural Tendon Integrity.

BACKGROUND: The number of arthroscopic rotator cuff surgeries is consistently increasing. Although generally considered successful, the reported number of retears after rotator cuff repair is substantial. Short-term clinical outcomes are reported to be rarely impaired by tendon retears, whereas to our knowledge, there is no study documenting long-term clinical outcomes and tendon integrity after arthroscopic rotator cuff repair. PURPOSE: To investigate longitudinal long-term repair integrity and clinical outcomes after arthroscopic rotator cuff reconstruction. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Thirty patients who underwent arthroscopic rotator cuff repair with suture anchors for a full-tendon full-thickness tear of the supraspinatus or a partial-tendon full-thickness tear of the infraspinatus were included. Two and 10 years after initial arthroscopic surgery, tendon integrity was analyzed using magnetic resonance imaging (MRI). The University of California, Los Angeles (UCLA) score and Constant score as well as subjective questions regarding satisfaction with the procedure and return to normal activity were used to evaluate short- and long-term outcomes. RESULTS: At the early MRI follow-up, 42% of patients showed a full-thickness rerupture, while 25% had a partial rerupture, and 33% of tendons remained intact. The 10-year MRI follow-up (129 ± 11 months) showed 50% with a total rerupture, while the other half of the tendons were partially reruptured (25%) or intact (25%). The UCLA and Constant scores significantly improved from preoperatively (UCLA total: 50.6% ± 20.2%; Constant total: 44.7 ± 10.5 points) to 2 years (UCLA total: 91.4% ± 16.0% [ P < .001]; Constant total: 87.8 ± 15.3 points [ P < .001]) and remained significantly higher after 10 years (UCLA total: 89.7% ± 15.9% [ P < .001]; Constant total: 77.5 ± 15.6 points [ P < .001]). The Constant total score and Constant strength subscore, but not the UCLA score, were also significantly better at 10 years postoperatively in patients with intact tendons compared with patients with retorn tendons (Constant total: 89.0 ± 7.8 points vs 75.7 ± 14.1 points, respectively [ P = .034]; Constant strength: 18.0 ± 4.9 points vs 9.2 ± 5.2 points, respectively [ P = .006]). The majority of patients rated their satisfaction with the procedure as "excellent" (83.3%), and 87.5% returned to their normal daily activities. CONCLUSION: Arthroscopic rotator cuff repair showed good clinical long-term results despite a high rate of retears. Nonetheless, intact tendons provided significantly superior clinical long-term outcomes, making the improvement of tendon healing and repair integrity important goals of future research efforts.

Arthroscopic Implant-Free Bone Grafting for Shoulder Instability With Glenoid Bone Loss: Clinical and Radiological Outcome at a Minimum 2-Year Follow-up.

BACKGROUND: Posttraumatic anteroinferior shoulder dislocations with concomitant glenoid bone loss show high recurrence rates. The open J-bone graft technique for implant-less anatomic restoration of bony glenoid structure has previously been described, whereas results of arthroscopic techniques are currently not available. PURPOSE: To evaluate clinical and radiological outcome after arthroscopic anatomic reconstruction of the glenoid for recurrent anteroinferior glenohumeral instability. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Fifteen shoulders of 14 patients with recurrent anteroinferior shoulder instability were prospectively followed after glenoid reconstruction with a modified arthroscopic, implant-free J-bone graft. Preoperatively, the instability severity index score was documented. Patients were followed for a minimum of 2 years using the Rowe score and the Constant score. Subjective outcome was assessed using a visual analog scale (VAS) for pain and the subjective shoulder value for sports (SSVS); satisfaction with procedure outcome was also rated. Range of motion was recorded. Incidence of recurrent instability, defined as dislocation, subluxation, or persistent apprehensiveness, was documented. Pre- and postoperative (1 day and 3, 12, and 24 months) computed tomographic images were used to evaluate glenoid bone loss, reconstruction of the glenoid, and graft remodeling. RESULTS: All preoperative scores (Rowe score: 57.6 ± 14.4; Constant score: 70.9 ± 8.9; VAS: 4.4 ± 2.6; SSVS: 31.4% ± 19.5%) were significantly (P ≤ .02) improved at final follow-up (Rowe score: 98.6 ± 1.5; Constant score: 96.3 ± 3.9; VAS: 0.2 ± 0.6; SSVS: 95.6% ± 3.8%). The preoperative glenoid area (82.1% ± 4.5%) was significantly increased immediately after surgery to 99.2% ± 6.6% (P < .001). After a physiological remodeling process, the glenoid area remained significantly increased at the latest follow-up (89.5 ± 3.2%, P < .001). J-bone grafting successfully restored glenoid concavity by significantly increasing concavity extent and depth from preoperative (19.8 ± 2.1 and 0.9 ± 0.6 mm, respectively) to postoperative (24.0 ± 2.1 and 2.1 ± 0.8 mm, respectively) (P < .001). There were no recurrent instabilities. One traumatic graft fracture occurred during the follow-up period. CONCLUSION: The arthroscopic J-bone graft technique permits minimally invasive reconstruction of anteroinferior glenoid defects and provided excellent early clinical outcome without recurrent instability in posttraumatic shoulder dislocations. A physiological remodeling process leads to restoration of a more natural glenoid anatomy.

Arthroscopic management of massive rotator cuff tears: an evaluation of debridement, complete, and partial repair with and without force couple restoration.

PURPOSE: To evaluate the effectiveness of arthroscopic debridement (DB), partial (PR), and complete repair (CR) for massive rotator cuff tears (mRCT) in terms of functional and subjective parameters, and repair integrity. METHODS: For this single-centre study, 68 consecutive shoulders with mRCT involving at least three tendons and treated with arthroscopic DB (n = 23), PR (n = 22), and CR (n = 23) were included. All patients (52-81 years) were prospectively assessed before and at a mean of 45 months after surgery using functional and subjective parameters. Preoperative tendon rupture pattern and post-operative repair integrity were assessed by MRI. A coding system describing accurately rotator cuff rupture, treatment, and integrity was established. RESULTS: All treatment groups improved significantly from pre- to post-operative (P < 0.01), while preoperative parameters, except fatty degeneration, were not significantly different. However, post-operative comparisons revealed similar scores with DB (constant score, CS 65.8 ± 14.7, qDASH 24.1 ± 20.6) and PR (CS 67.5 ± 9.9, P = n.s.; qDASH 20.5 ± 14.4, P = n.s.), while CR were significantly better (CS 80.3 ± 8.9; qDASH 7.0 ± 8.7; P ≤ 0.001). Force couple restoration of PR did not significantly influence outcome. Re-tear rates with CR (29 %) were lower compared to PR (53 %). Intact CR compared to intact PR showed better CS (83.4 ± 7.3 vs. 68.5 ± 10.6, P = 0.009) and qDASH (5.4 ± 8.3 vs. 21.2 ± 9.5, P = 0.006). The vast majority of patients were satisfied with their arthroscopic procedure (DB 87 %; PR 86 %; CR 91 %). CONCLUSION: Arthroscopic DB, PR, and CR were effective in treating mRCT involving at least three tendons. Reparability of mRCT was influenced by fatty degeneration of the muscles. However, CR showed the most favourable short-term improvements. LEVEL OF EVIDENCE: IV.

Patient-specific instrumentation improved mechanical alignment, while early clinical outcome was comparable to conventional instrumentation in TKA.

PURPOSE: The aim of this prospective study was to compare early clinical outcome, radiological limb alignment, and three-dimensional (3D)-component positioning between conventional and computed tomography (CT)-based patient-specific instrumentation (PSI) in primary mobile-bearing total knee arthroplasty (TKA). METHODS: Two hundred ninety consecutive patients (300 knees) with severe, debilitating osteoarthritis scheduled for TKA were included in this study using either conventional instrumentation (CVI, n = 150) or PSI (n = 150). Patients were clinically assessed before and 2 years after surgery according to the Knee-Society-Score (KSS) and the visual-analog-scale for pain (VAS). Additionally, the Western Ontario McMaster Universities Osteoarthritis Index (WOMAC) and the Oxford-Knee-Score (OKS) were collected at follow-up. To evaluate accuracy of CVI and PSI, hip-knee-ankle angle (HKA) and 3D-component positioning were assessed on postoperative radiographs and CT. RESULTS: Data of 222 knees (CVI: n = 108, PSI: n = 114) were available for analysis after a mean follow-up of 28.6 ± 5.2 months. At the early follow-up, clinical outcome (KSS, VAS, WOMAC, OKS) was comparable between the two groups. Mean HKA-deviation from the targeted neutral mechanical axis (CVI: 2.2° ± 1.7°; PSI: 1.5° ± 1.4°; p < 0.001), rates of outliers (CVI: 22.2%; PSI: 9.6%; p = 0.016), and 3D-component positioning outliers were significantly lower in the PSI group. Non-outliers (HKA: 180° ± 3°) showed better clinical results than outliers at the 2-year follow-up. CONCLUSIONS: CT-based PSI compared with CVI improves accuracy of mechanical alignment restoration and 3D-component positioning in primary TKA. While clinical outcome was comparable between the two instrumentation groups at early follow-up, significantly inferior outcome was detected in the subgroup of HKA-outliers. LEVEL OF EVIDENCE: Prospective comparative study, Level II.

Arthroscopic partial shoulder resurfacing.

PURPOSE: The purpose of this study was to report patients' clinical and subjective outcomes 2 years after arthroscopic-assisted partial resurfacing of the humeral head. METHODS: In this prospective case series, 11 patients (4 females, 7 males; median age, 59 years; range 47-72) underwent arthroscopic-assisted partial shoulder resurfacing between April 2010 and March 2011. Clinical conditions and subjective assessments were evaluated before surgery and at 6 weeks, 3 and 6 months, and then annually after surgery using the Constant score (CS), active range of motion (ROM), the visual analogue scale (VAS) for pain, the American Shoulder and Elbow Surgeons scale (ASES), and the subjective shoulder value (SSV). Radiological outcomes and major complications were monitored. RESULTS: The mean CS improved significantly from 54.6 ± 13.6 preoperatively to 72.9 ± 17.2 points 6 weeks postoperatively (P = 0.009). At the 2-year follow-up, the mean CS had further increased to 86.5 ± 14.3 points (P < 0.001). Trends towards increasing ROMs were detected. VAS, ASES, and SSV significantly improved from baseline to the first follow-up and maintained improvement after 2 years. One patient required revision surgery owing to a technical failure and two patients because of rapidly progressive osteoarthritis. Ten of 11 patients (91 %) claimed that they would undergo arthroscopic partial shoulder resurfacing again. CONCLUSION: Arthroscopic-assisted partial humeral head resurfacing, which has the advantages of bone stock preservation and the maintenance of an intact subscapularis tendon, allowed immediate postoperative mobilization and provided significant improvements in subjective outcomes, especially for pain relief in active patients without severe glenoid cartilage wear. LEVEL OF EVIDENCE: Therapeutic case series, Level IV.

Superiority of bridging techniques with medial fixation on initial strength.

PURPOSE: The purpose of our study was to evaluate the initial fixation strength of bridging techniques compared to other suture techniques for rotator cuff repair using a biomechanical animal model, which incorporated pretesting of intact tendons. METHODS: Seventy-six fresh bovine shoulders were used for testing seven suture configurations including simple suture (SS), mattress suture (MS), Mason-Allen (MA), modified double row (mDR), SpeedBridge (SpB), SpeedBridge with medial fixation (mSpB), and double-mattress SutureBridge (dmSuB) techniques. Cyclic loading was performed with all intact bone-tendon complex before (pretest) and after repair of the tendon (main test) at the level of 10 and 180 N at 100 Hz with displacement-controlled ramps of ± 33 mm/s. The pretest was stopped after 200 cycles. For the main test, the loading scheme was continued for a maximum of 500 cycles or until failure. RESULTS: The mean elongation of all 76 intact tendons measured at the pretest was 3.8 ± 0.6 mm (2.4-5.4 mm). No differences of gap formations at the 1st cycle were detected between SS, MS, MA, and mDR. SpB showed significant higher gap formations compared to all other suture techniques (p = 0.001). No significant differences were detected between mSpB and dmSuB, whereas both techniques were significant different when compared to the other groups (p < 0.05). CONCLUSIONS: In this study, results showed that bridging techniques with medial fixations have superior initial repair strength compared to other suture techniques. Knowledge of initial fixation strength of rotator cuff repair techniques may be of informative value to the surgeon.

All-arthroscopic implant-free iliac crest bone grafting: new technique and case report.

Glenoid bone loss is a recognized risk for recurrent instability. Open J-graft augmentation has been reported as a well-established procedure for anterior shoulder instability. Few data are available on arthroscopic techniques for the repair of bony Bankart lesions. We describe an all-arthroscopic implant-free iliac crest bone grafting technique and present the case of a 32-year-old hockey player who underwent glenoid reconstruction using this novel arthroscopic repair technique after 2 failed soft-tissue procedures. After 13 months, the patient reached nearly full range of motion with a slight loss of external rotation. The computed tomography scan showed a restoration of the glenoid cavity and complete healing of the graft.