RESUMEN
Organolead trihalide perovskites have drawn substantial interest for photovoltaic and optoelectronic applications due to their remarkable physical properties and low processing cost. However, perovskite thin films suffer from low carrier mobility as a result of their structural imperfections such as grain boundaries and pinholes, limiting their device performance and application potential. Here we demonstrate a simple and straightforward synthetic strategy based on coupling perovskite films with embedded single-walled carbon nanotubes. We are able to significantly enhance the hole and electron mobilities of the perovskite film to record-high values of 595.3 and 108.7 cm2 V-1 s-1 , respectively. Such a synergistic effect can be harnessed to construct ambipolar phototransistors with an ultrahigh detectivity of 3.7 × 1014 Jones and a responsivity of 1 × 104 A W-1 , on a par with the best devices available to date. The perovskite/carbon nanotube hybrids should provide a platform that is highly desirable for fields as diverse as optoelectronics, solar energy conversion, and molecular sensing.
RESUMEN
The realization of low-cost photodetectors with high sensitivity, high quantum efficiency, high gain and fast photoresponse in the visible and short-wave infrared remains one of the challenges in optoelectronics. Two classes of photodetectors that have been developed are photodiodes and phototransistors, each of them with specific drawbacks. Here we merge both types into a hybrid photodetector device by integrating a colloidal quantum dot photodiode atop a graphene phototransistor. Our hybrid detector overcomes the limitations of a phototransistor in terms of speed, quantum efficiency and linear dynamic range. We report quantum efficiencies in excess of 70%, gain of 10(5) and linear dynamic range of 110 dB and 3 dB bandwidth of 1.5 kHz. This constitutes a demonstration of an optoelectronically active device integrated directly atop graphene and paves the way towards a generation of flexible highly performing hybrid two-dimensional (2D)/0D optoelectronics.
RESUMEN
Semiconducting, two-dimensional molybdenum disulfide (MoS2) is considered a promising new material for highly sensitive photodetection, because of its atomically thin profile and favorable bandgap. However, reported photodetectors to date show strong variation in performance due to the detrimental and uncontrollable effects of environmental adsorbates on devices due to large surface to volume ratio. Here, we report on highly stable and high-performance monolayer and bilayer MoS2 photodetectors encapsulated with atomic layer deposited hafnium oxide. The protected devices show enhanced electronic properties by isolating them from the ambience as strong n-type doping, vanishing hysteresis, and reduced device resistance. By controlling the gate voltage the responsivity and temporal response can be tuned by several orders of magnitude with R â¼ 10-10(4) A/W and t â¼ 10 ms to 10 s. At strong negative gate voltage, the detector is operated at higher speed and simultaneously exhibits a low-bound, record sensitivity of D* ≥ 7.7 × 10(11) Jones. Our results lead the way for future application of ultrathin, flexible, and high-performance MoS2 detectors and prompt for further investigation in encapsulated transition metal dichalcogenide optoelectronics.
RESUMEN
A hybrid phototransistor consisting of colloidal PbS quantum dots and few layers of MoS2 (≥2 layers) is demonstrated. The hybrid benefits from tailored light absorption in the quantum dots throughout the visible/near infrared region, efficient charge-carrier separation at the p-n interface, and fast carrier transport through the MoS2 channel. It shows responsivity of up to 10(6) A W(-1) and backgate-dependent sensitivity.
Asunto(s)
Disulfuros/química , Equipos y Suministros Eléctricos , Plomo/química , Molibdeno/química , Puntos Cuánticos , Sulfuros/química , Diseño de Equipo , Luz , Nanoestructuras/química , Imagen Óptica , Espectrometría RamanRESUMEN
Charge and polarization modulations in Fe3 O4 are controlled by taking advantage of interfacial strain effects. The feasibility of oxidation state control by strain modification is demonstrated and it is shown that this approach offers a stable configuration at room temperature. Direct evidence of how a local strain field changes the atomic coordination and introduces atomic displacements leading to polarization of Fe ions is presented.
RESUMEN
Plasmonic excitation in metals has received great attention for light localization and control of light-matter interactions at the nanoscale with a plethora of applications in absorption enhancement, surface-enhanced Raman scattering, or biosensing. Electrically active plasmonic devices, which had remained underexplored, have recently become a growing field of interest. In this report we introduce a metal-insulator-semiconductor heterostructure for plasmo-electric energy conversion, a novel architecture to harvest hot-electrons derived from plasmonic excitations. We demonstrate external quantum efficiency (EQE) of 4% at 460 nm using a Ag nanostructured electrode and EQE of 1.3% at 550 nm employing a Au nanostructured electrode. The insulator interfacial layer has been found to play a crucial role in interface passivation, a requisite in photovoltaic applications to achieving both high open-circuit voltages (0.5 V) and fill-factors (0.5), but its introduction simultaneously modifies hot-electron injection and transport. We investigate the influence passivation has on these processes for different material configurations, and characterize different types of transport depending on the initial plasmon energy band, reporting power conversion efficiencies of 0.03% for nanopatterned silver electrodes.