A Panoramic X-ray as a Supportive Diagnostic Tool for the Screening of Osteoporosis in Patients with Hemophilia A and B.

BACKGROUND: Hemophilia is associated with an increased risk of developing osteoporosis and osteopenia. The aim of the study was to interpret the usefulness of fractal analysis of the trabecular bone of the mandible (FD) and selected radiomorphic indices (the antegonial index (AI) and Klemetti index (KI)) to assess the risk of reduced bone mineral density (BMD) in patients with hemophilia A/B. METHODS: The study group consisted of 50 patients with type A/B hemophilia. The control group consisted of 25 males without congenital bleeding disorders. The patients had a panoramic radiograph taken with the same X-ray machine (Vistapano S, Durr Dental, Bietigheim-Bissingen, Germany). The AudaXCeph software (Audax d.o.o., Ljubljana, Slovenia) was used to evaluate the AI index, and the ImageJ, software with a specially prepared script, was used to evaluate the FD. The mandibular cortex was assessed distal to the mental foramen using the Klemetti index. RESULTS: There were no statistically significant differences between the AI, KI and FD values between the study group and the control group. CONCLUSIONS: This study indicated the lack of usefulness of AI, KI and fractal analysis in identifying patients with hemophilia at risk of reduced bone mass.

Assessment of the Prevalence of Radix Entomolaris and Distolingual Canal in Mandibular First Molars in 15 Countries: A Multinational Cross-sectional Study with Meta-analysis.

AIM: The aim of this study was two-folded: i) to assess the prevalence of Distolingual Canal (DLC) and Radix Entomolaris (RE) in Mandibular First Molars (M1Ms), using Cone Beam Computed Tomography (CBCT) images and ii) to assess the impact of sociodemographic factors on the prevalence of these conditions worldwide. METHODS: CBCT images were scanned retrospectively and the ones including bilateral M1Ms were included in the study. The evaluation was performed by 1 researcher in each country, trained with CBCT technology. A written and video instruction program explaining the protocol to be followed step-by-step was provided to all observers to calibrate them. The CBCT imaging screening procedure consisted of evaluating axial sections from coronal to apical. The presence of DLC and RE in M1Ms (yes/no) was identified and recorded. RESULTS: Six thousand three hundred four CBCTs, representing 12,608 M1Ms, were evaluated. A significant difference was found between countries regarding the prevalence of both RE and DLC (P < .05). The prevalence of DLC ranged from 3% to 50%, and the overall prevalence was 22% (95% CI: 15%-29%). RE prevalence ranged from 0% to 12%, and the overall prevalence was 3% (95% CI: 2%-5%). There were no significant differences between left and right M1Ms or between genders for either DLC or RE (P > .05). CONCLUSION: The overall prevalence of RE and DLC in M1Ms was 3% and 22%. Additionally, both RE and DLC showed substantial bilaterally. These variations should be considered by endodontic clinicians during endodontic procedures in order to avoid potential complications.

Tooth Migration in a Female Patient with Hyperdontia: 11-Year Follow-Up Case Report.

We described an 11-year follow-up of a patient with a non-syndrome multiple supernumerary teeth who had one extra tooth in the maxilla and four additional premolars in the mandible. Together with an additional distal migration of the second lower right premolar to the ramus of the mandible that also occurred, it comprises a unique combination of conditions that were not previously presented in the literature. We showed the significance of routine X-rays in cases of hyperdontia since the additional teeth may develop later than expected and the patient may not experience any symptoms.

Potential Biochemical Markers and Radiomorphometric Indices as Predictors of Reduced Bone Mass in Patients with Congenital Hemophilia.

Background: The study aimed to evaluate radiomorphometric indices derived from panoramic X-rays and selected blood markers of bone turnover and neutrophil extracellular traps, with a view to identifying hemophilic patients at risk of developing osteoporosis. Methods: The study consisted of 50 adult men with hemophilia A and B (mild, moderate, and severe). The control group consisted of 25 healthy adult men. In both groups, blood samples were collected to determine concentrations of citrullinated histone H3 (CH3) and osteocalcin (BGLAP) with ELISA tests, and panoramic X-rays were obtained. Images were imported into AudaXCeph software to calculate two radiomorphometric indices: mental index (MI) and panoramic mandibular index (PMI). Concentrations of BGLAP and CH3 were compared with MI and PMI values in patients with and without hemophilia. Results: There were statistically significant differences in BGLAP, CH3, and PMI between the study and the control group (p < 0.05). Multivariate logistic regression analysis showed a predictive value for PMI, BGLAP, and CH3.The ROC curve with cutoff point (Youden index) at 0.40­PMI was calculated. No correlation was observed for the PMI index in any particular subgroup of patients. No correlation between MI and BGLAP/CH3 was observed. Conclusions: Simultaneous use of PMI value and BGLAP and CH3 levels may allow the identification of patients with hemophilia who requirea detailed diagnosis of osteoporosis with DXA.

The Primary Outbreaks of Burkitt Lymphoma in the Oral Cavity. A Report of Two Cases, Review of the Literature and Dental Implications.

Two cases of Sporadic Burkitt's lymphoma in children aged 11 and 8 years with primary symptoms in the oral cavity are reported. The first symptoms of the disease appeared in the oral cavity and were initially misdiagnosed as an inflammatory condition in one case and incidental findings not associated with the primary reason for visiting the dentist's office in the second case. Biopsies of the lesions revealed the actual cause of the observed changes and contributed to the prompt initiation of polychemotherapy treatment. A review of current literature presents the known symptoms of Burkitt's Lymphoma in the oral cavity and the available diagnostic methods. The role of the primary care physicians-the pedodontist and paediatrician-in the diagnostic and therapeutic process is discussed.

Limited Mandibular Movements as a Consequence of Unilateral or Asymmetrical Temporomandibular Joint Involvement in Juvenile Idiopathic Arthritis Patients.

This study aimed to assess the asymmetry of the lower face and motor dysfunction of the masticatory system resulting from unilateral or asymmetrical bilateral temporomandibular joint (TMJ) involvement in juvenile idiopathic arthritis (JIA) patients. The study consisted of clinical examination and cone beam computed tomography (CBCT) of TMJs. Statistical analysis showed correlations between several factors: facial asymmetry and mandibular lateral deviation; the direction of mandibular deviation and the degree of radiological deformities in TMJs; the child's age at the time of the onset and the range of lateral movement towards the healthy or less destructed joint. In addition, there was a significant difference in ranges of lateral movements; a significantly smaller range was observed for the joint with fewer condylar abnormalities compared to the range in the opposite direction. In JIA children, among the clinical markers of unilateral or asymmetrical TMJ involvement, the asymmetry of the lower face, deviation of the mandible on opening, and an uneven range of mandibular lateral movements deserve attention. The obtained results do not show a relationship between the degree of condylar changes and the asymmetry of the lower face and the presence and degree of mandibular motor dysfunction.

Dental Anomalies in Rare, Genetic Ciliopathic Disorder-A Case Report and Review of Literature.

BACKGROUND: Primary ciliary dyskinesia (PCD) is a rare, ciliopathic disorder. In many ciliopathies, dental anomalies are observed alongside other symptoms of the disease. To date, there are no published reports concerning the dental developmental problems that are associated with ciliary defects in PCD patients. METHODS: Patients suffering from PCD underwent dental clinical examination, which included the assessment of developmental disorders regarding the number and morphological structure of the teeth (size and shape) as well as developmental disorders of mineralised dental tissues. Then, three-dimensional radiographic examination was performed utilising Cone Beam Computed Tomography (CBCT). RESULTS: Four PCD patients, aged 31-54, agreed to enter the study. Dental examinations showed the presence of dental developmental disorders in three of them. Additionally, CBCT showed abnormalities in those patients. CONCLUSIONS: 1. The dental phenotype in PCD patients seems to be heterogeneous. Tooth developmental disorders resulting from abnormal odontogenesis may be a symptom of PCD that is concomitant with other developmental abnormalities resulting from malfunctioning primary cilia. 2. Patients with ciliopathies are likely to develop dental developmental defects. Therefore, beginning in early childhood, they should be included in a targeted specialised dental programme to enable early diagnosis and to ensure dedicated preventive and therapeutic measures.

Computed Tomography versus Optical Scanning: A Comparison of Different Methods of 3D Data Acquisition for Tooth Replication.

OBJECTIVES: The study aimed to compare the accuracy of different methods of data acquisition and data reconstruction and to assess their usefulness for 3D printing of tooth replicas. METHODS: 3-dimensional models of molar and canine teeth obtain utilizing CBCT examination with different protocols, and optical scanning was compared with models derived from micro-computed (micro-CT) examination using Geomagic Studio Qualify software. A pairwise comparison of 3D models with analysis of standard deviation and the value of the mean distance of given surfaces was performed. RESULTS: Standard deviation and the value of the mean distance were lowest for optical scanning followed by CBC in high and standard resolution in all tested protocols. Models, obtained with high-resolution CBCT protocols, of teeth in and outside of alveolar bone showed similar average distance parameters, but standard deviation parameter was significantly lower for models of teeth scanned outside of the socket. Good surface representation on all models was seen at relatively smooth areas while in areas of high changes in the geometry CBCT based models performed inferiorly to those obtained from an optical scanner. CONCLUSIONS: In case of teeth of noncomplicated texture, independently from a position (within or outside the alveolar socket), the high-resolution CBCT seems to be a sufficient method to obtain data for 3D printed tooth replica. Optical scanning performs better when a detailed replica is necessary.

A Comparison between the Implant Stability Quotient and the Fractal Dimension of Alveolar Bone at the Implant Site.

OBJECTIVES: Fractal analysis of the radiographic pattern of bone has been used to evaluate its quantitative properties. However, the relation between initial implant stability and quality of bone remains unclear. The objective of this study was to evaluate RFA values in relation to the fractal dimension of bone where the implant was inserted. MATERIAL AND METHODS: A total of 50 two-stage dental implants were placed in the maxilla and mandible of 32 patients. After implant placement, an implant stability quotient (ISQ) was measured in two perpendicular planes. On intraoral digital periapical radiographs, three 35x35 pixels' regions of interest (ROIs) were chosen covering the bone adjacent to the neck (ROI 1), middle (ROI 2), and apical (ROI 3) part of the implant, respectively. For every ROI, a fractal dimension (FD) was calculated. A linear correlation, as well as a logistic regression analysis, was used to identify a possible relation between the ISQ and FD values for every ROI in the maxilla and mandible. RESULTS: The ISQ and FD values were found to be correlated at ROI 1 for the maxilla. There was no linear correlation between ISQ and FD values in any of the three ROIs in the mandible. However, logistic regression analysis showed that in ROI 1 and ROI 3 the values of FD and ISQ are statistically important and may be used to express the difference between maxilla and mandible. CONCLUSION: The fractal dimension of alveolar bone measured from intraoral digital radiographs alone may be an insufficient parameter to determine initial implant stability.

The Association between Maxillary Sinus Dimensions and Midface Parameters during Human Postnatal Growth.

OBJECTIVE: The aim of the study based on CT images was to assess the age-related changes in maxillary sinus diameters in relation to diameters of the facial skeleton. MATERIALS AND METHODS: The retrospective analysis of CT images of the head of 170 patients aged 0-18 years (85 females and 85 males) was performed. Specific orientation points (zy, zm, pr, ns, n, and P) were identified in every patient and the following distances were measured: zy-zy, maximum facial width; zm-zm, midfacial width; n-pr, upper facial height; ns-pr, alveolar facial height; and ns-P, distance not indicated in craniometry. RESULTS: The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter called MSW, maximum vertical diameter called MSH, and maximum anteroposterior diameter (length) called MSL. In females, the correlation of MSW, MSH, and MSL and zy-zy, as well as n-pr distances, is very strong. Moreover, the significant correlation was found between all measurements of maxillary sinus and ns-pr as well as ns-P distances in females. The correlation between MSL and all measurements of midface as well as MSH and MSW and all measurements except ns-P is stronger in females than in males. In males, all measurements of maxillary sinus correlate with ns-P distance very strongly. CONCLUSIONS: The statistical analysis (correlation and determination coefficient) showed that all measurements of maxillary sinuses correlate with midface dimensions.

Introducing a simple method of maxillary sinus volume assessment based on linear dimensions.

Measuring sinus volume in a general practice clinic is a complex and time-consuming procedure, requiring experience in the use of radiological methods In the presented research, the automatically estimated maxillary sinus volume was compared with maxillary sinus volume assessed with mathematical formulas used to calculate the volume of spheres and pyramids. The starting point for the statistical analysis were specific measurements of the sinuses. We wanted to discover which geometric shape has the volume that is nearest to the automatically estimated volume. The study was performed using samples of CT scans of pediatric patients age 1-17. The dimensions (maximal width, maximal height, maximal length) were used for manual calculations. For the automatic volume calculation, the CT Image Segmentation algorithm (Syngo Via for Oncology, Siemens) was used. Pearson's correlation coefficient was applied to analyse the interrelationship between automatically and manually calculated volume of maxillary sinus. It was statistically established that the "sphere", "pyramid" and "mean" manually calculated maxillary sinus volume were accurate and strongly correlated with the automatically estimated maxillary sinus volume. The volume of the sphere corresponds better with the automatic measurements than the volume of the pyramid. The variations are significant and they were made reliable with the application of a statistical test. It is quick and easy to calculate the maxillary sinus volume based on its linear dimensions instead of applying advanced software. The manual method for maxillary sinus volume calculation requires three linear measurements of the sinus (length, width, and height) and can be recommended if the automatically estimated volume cannot be obtained.

Maxillary sinuses and midface in patients with cleidocranial dysostosis.

The cleidocranial dysplasia is general skeletal disorder with an autosomal dominant inheritance. It is manifested by many craniofacial abnormalities, of which the maxillary hypoplasia is the most evident. The aim of the study was to use CBCT to evaluate the volume of the maxillary sinuses and the dimensions of maxillae in patients with CCD and compare them with healthy individuals. Files of four children with cleidocranial dysplasia were investigated. Volume of every maxillary sinus as well as two dimensional measurements of distances between particular points of interest located on surface of maxilla were calculated from reconstructed CBCT examination. Data were compared with a control group. Statistical analysis was performed. Linear and volumetric data obtained using CBCT was collected and compared with a control group. All affected children had both maxillary sinus volume and maxillary dimensions smaller than control values. The maxillary sinuses were underdeveloped up to half of normal values. The largest differences were recorded in vertical linear dimensions of the maxillae. Horizontal dimensions were also lower. There are morphological modifications of bone tissue which accompany CCD. It seems that these changes occur on the midfacial region and to a greater extent concern the maxillary sinus volume.

Analysis of human dentition from Early Bronze Age: 4000-year-old puzzle.

This paper presents the first ever paleodontological investigation of human remains from an archeological site in Central Europe dating from the Early Bronze Age and attributed to the Strzyzow Culture. It corroborates the knowledge gained from archeological, anthropological and genetical investigations. Our study aimed to assess dental status, dental morphology and dental pathologies as well as tooth wear and enamel hypoplasia based on visual inspection and stereomicroscopic investigation. The research was supported by CBCT imaging to obtain digital images and 3D reconstructions as well as 2D radiographs essential for dental age estimation. All of the 191 teeth discovered showed morphological similarity, with adult teeth showing similar color, shape and size. A maxillary molar presenting with a unique root morphology and a mandibular molar with a rare occlusal surface were found. Both permanent and deciduous dentition presented significant tooth wear. A few specimens displayed signs of dental caries, periapical pathology and antemortem tooth loss. Three individuals exhibited linear enamel hypoplasia. CBCT provided high-quality 2D images useful for dental age estimation by non-destructive methods. Estimated dental age correlated with the age estimated by other anthropological methods. In one case, this was crucial because of insufficient material for anthropological analysis. The presented studies have proved that besides the skeleton, teeth can be used as a fundamental tool in assessing the overall health and living conditions of paleopopulations. It would seem that there is potential for considerable development to be made in the research and investigation of paleodontological material using CBCT.

[Estimation of mandibular bone status and lumbar bone mineral density in postmenopausal women]. / Ocena stanu kosci zuchwy i gestosci mineralnej kosci w odcinku ledzwiowym kregoslupa u kobiet po menopauzie.

UNLABELLED: Osteoporosis is a serious health problem among postmenopausal women. Many clinical studies have shown a correlation between low bone mineral density (BMD) parameters of spinal column, hip and bone status of mandible. AIM: The aim of the study was to compare the status of mandibular bone and the lumbar part of the spine in postmenopausal women with osteoporosis, osteopenia and normal BMD. MATERIALS AND METHODS: 47 postmenopausal women (mean age 54.80 +/- 3.65 years) were included into the study. Densitometry (DXA) of the lumbar part of the spinal column was performed in all patients. The results of densitometry helped to differentiate the patients into 3 groups: those with osteoporosis (n=10) or osteopenia (n=20) and those with normal BMD (n=17). Panoramic radiographs of the mandible were taken of all the patients. Obtained results were analyzed stastically. RESULTS: No correlations were found between the panoramic mandibular index (PMI) and mandibular ratio (MR) and vertebral (lumbar) bone loss in postmenopausal women. There was a positive correlation between the distance from the inferior margin of the mental foramen to the inferior mandibular cortex and the degree of lumbar BMD deficiency. CONCLUSIONS: Our study shows that PMI and MR are not adequate radiological marker of vertebral bone loss in postmenopausal women. However, measurements of the distance between the inferior margin of the mental foramen and the inferior mandibular cortex did correlate with the degree of lumbar BMD deficiency. This parameter can be useful in the estimation of osteoporosis risk.

[Number of teeth and hormonal profile of postmenopausal women with osteoporosis, osteopenia and normal bone mineral density--a preliminary study]. / Liczba zebów oraz profil hormonalny u kobiet po menopauzie z osteoporoza, osteopenia oraz prawidlowa gestoscia tkanki kostnej--badania wstepne.

UNLABELLED: Profound hypoestrogenism causes increased risk of osteoporosis and bone fracture in menopause. This period of women life is also characterized by decrease number of teeth and deterioration of oral cavity health. AIM: The aim of the study was to assess the number of teeth, hormonal profile (Follicle-stimualting hormone (FSH), estradiol (E2), testosterone (T) and dehydroepiandrosterone sulphate (DHEA-S) and the bone mineral density (BMD) of the lumbar part of the spine in postmenopausal women with osteoporosis, osteopenia and normal BMD. The next step of the study was to determine whether there was a correlation between vertebral mineral bone density, the hormonal profile and the number of teeth. MATERIALS AND METHODS: A total number of 47 women was involved in the study. Based on the results of densitometry tests (DEXA) of vertebral column the subjects were divided into 3 groups: 10 with osteoporosis, 20 with osteopenia and 17 with normal BMD. All the subjects had undergone a hormonal assessment which included blood serum estimation for FSH, E2, DHEA-S and T levels. Also the total number of teeth present was recorded. RESULTS: Serum estradiol and testosterone levels in postmenopausal women were found to be positively correlated with the number of teeth present. A negative correlation was found between age and the number of maxillary teeth in postmenopausal women with osteopenia. There was no influence of serum FSH, estradiol, testosterone and DHEA-S levels on vertebral BMD loss in postmenopausal women. There was no correlation between teeth number and BMD of vertebral column. CONCLUSIONS: Serum levels of estradiol and testosterone in postmenopausal women positively correlate with teeth numbers. Age is the main risk factor for teeth loss in postmenopausal women.

Accuracy of the anthropometric measurements of skeletonized skulls with corresponding measurements of their 3D reconstructions obtained by CT scanning.

BACKGROUND: The anthropometric measurements of the skeletonized skull are crucial in the investigation of human remains, mostly for personal identification. The images of the skull are used if the superimposition or approximation of the facial appearance is to be performed. The aim of the study was to compare the accuracy of the anthropometric measurements of skeletonized skulls with corresponding measurements of their 3D reconstructions obtained by CT scanning. METHODS: Ten skeletonized skulls and their 3D digital reconstructions were measured according to standard anthropometric procedures. The results were compared and statistical analysis was performed. RESULTS: The statistical analysis revealed that the 3D reconstruction is absolutely reliable for any measurements within the skull. The results of the measurements obtained from the CT image were accurate and comparable to the results of the anthropometric analysis of the skeletonized skull. The correlation between the anthropometry of the skeletonized skulls and the CT reconstructions was strong. CONCLUSIONS: It is relevant that 3D reconstructions of the skull can be used in forensic anthropology for personal identification.

Identification of a buried cadaver based on finger ridge characteristics of a hand protected by a latex glove.

This paper presents the case of a cadaver buried in a pine grove, in loamy soil at a depth of about 1.8 m. The case is quite interesting due to the fact that one hand of the victim was bare and the other one was clad in a latex glove. In the laboratory, the severed hands were gently washed with water. The left palm exhibited signs of advanced decomposition. The ridges were visible only on the thumb. The gloved hand was found to be in much better condition. There were signs of saponification on the palm. Ridges on both the palm and all fingers were visible. The fingers of the right hand, palm prints, and the thumb of the left hand were successfully matched against a ten-print card. The match provided the police with a positive identification of the missing person.

Diagnostic accuracy of cone beam computed tomography compared with intraoral radiography for the detection of noncavitated occlusal carious lesions.

The aim of this study was to evaluate the accuracy of cone beam computed tomography (CBCT) in the detection of noncavitated occlusal caries lesions and to compare this accuracy with that observed with conventional radiographs. 135 human teeth, 67 premolars and 68 molars with macroscopically intact occlusal surfaces, were examined by two independent observers using the CBCT system: NewTom 3G (Quantitative Radiology) and intraoral conventional film (Kodak Insight). The true lesion diagnosis was established by histological examination. The detection methods were compared by means of sensitivity, specificity, predictive values and accuracy. To assess intra- and interobserver agreement, weighted kappa coefficients were computed. Analyses were performed separately for caries reaching into dentin and for all noncavitated lesions. For the detection of occlusal lesions extending into dentin, sensitivity values were lower for film (0.45) when compared with CBCT (0.51), but the differences were not statistically significant (p > 0.19). For all occlusal lesions sensitivity values were 0.32 and 0.22, respectively, for CBCT and film. The specificity scores were high for both modalities. Interobserver agreement amounted to 0.93 for the CBCT system and to 0.87 for film. It was concluded that the use of the 9-inch field of view NewTom CBCT unit for the diagnosis of noncavitated occlusal caries cannot be recommended.