Use of low cost near-infrared spectroscopy, to predict pasting properties of high quality cassava flour.

Determination of pasting properties of high quality cassava flour using rapid visco analyzer is expensive and time consuming. The use of mobile near infrared spectroscopy (SCiO™) is an alternative high throughput phenotyping technology for predicting pasting properties of high quality cassava flour traits. However, model development and validation are necessary to verify that reasonable expectations are established for the accuracy of a prediction model. In the context of an ongoing breeding effort, we investigated the use of an inexpensive, portable spectrometer that only records a portion (740-1070 nm) of the whole NIR spectrum to predict cassava pasting properties. Three machine-learning models, namely glmnet, lm, and gbm, implemented in the Caret package in R statistical program, were solely evaluated. Based on calibration statistics (R2, RMSE and MAE), we found that model calibrations using glmnet provided the best model for breakdown viscosity, peak viscosity and pasting temperature. The glmnet model using the first derivative, peak viscosity had calibration and validation accuracy of R2 = 0.56 and R2 = 0.51 respectively while breakdown had calibration and validation accuracy of R2 = 0.66 and R2 = 0.66 respectively. We also found out that stacking of pre-treatments with Moving Average, Savitzky Golay, First Derivative, Second derivative and Standard Normal variate using glmnet model resulted in calibration and validation accuracy of R2 = 0.65 and R2 = 0.64 respectively for pasting temperature. The developed calibration model predicted the pasting properties of HQCF with sufficient accuracy for screening purposes. Therefore, SCiO™ can be reliably deployed in screening early-generation breeding materials for pasting properties.

Genetic diversity and population structure of Uganda cassava germplasm.

Cassava (Manihot esculenta Crantz) holds significant economic importance globally. Evaluating a diverse range of germplasm based on molecular characteristics not only enhances its preservation but also supports its utilization in breeding programs. In this study, we assessed genetic diversity and population structure among 155 cassava genotypes from Uganda using 5247 single nucleotide polymorphism (SNP) markers. Genotyping by sequencing (GBS) was employed for SNP discovery and to evaluate genetic diversity and population structure using the ADMIXTURE software. The cassava accessions comprised two populations: 49 accessions from Ugandan lines and 106 accessions resulting from crosses between South American and Ugandan lines. The average call rate of 96% was utilized to assess marker polymorphism. Polymorphic information content values of the markers ranged from 0.1 to 0.5 with an average of 0.4 which was moderately high. The principal component analysis (PCA) showed that the first two components captured ~ 24.2% of the genetic variation. The average genetic diversity was 0.3. The analysis of molecular variance (AMOVA) indicated that 66.02% and 33.98% of the total genetic variation occurred within accessions and between sub-populations, respectively. Five sub-populations were identified based on ADMIXTURE structure analysis (K = 5). Neighbor-joining tree and hierarchical clustering tree revealed the presence of three different groups which were primarily based on the source of the genotypes. The results suggested that there was considerable genetic variation among the cassava genotypes which is useful in cassava improvement and conservation efforts.

Cut, Root, and Grow: Simplifying Cassava Propagation to Scale.

Cassava (Manihot esculenta Crantz) is an essential crop with increasing importance for food supply and as raw material for industrial processing. The crop is vegetatively propagated through stem cuttings taken at the end of the growing cycle and its low multiplication rate and the high cost of stem transportation are detrimental to the increasing demand for high-quality cassava planting materials. Rapid multiplication of vegetative propagules of crops comprises tissue culture (TC) and semi-autotroph hydroponics (SAH) that provide cost-effective propagation of plant materials; however, they contrast the need for specific infrastructure, special media and substrates, and trained personnel. Traditional methods such as TC and SAH have shown promise in efficient plant material propagation. Nonetheless, these techniques necessitate specific infrastructure, specialized media and substrates, as well as trained personnel. Moreover, losses during the intermediate nursery and adaptation stages limit the overall effectiveness of these methods. Building upon an earlier report from Embrapa Brazil, which utilized mature buds from cassava for rapid propagation, we present a modified protocol that simplifies the process for wider adoption. Our method involves excising single nodes with attached leaves from immature (green) cassava stems at 2 months after planting (MAP). These nodes are then germinated in pure water, eliminating the need for specific growth substrates and additional treatments. After the initial phase, the rooted sprouts are transferred into soil within 1-8 weeks. The protocol demonstrates a high turnover rate at minimal costs. Due to its simplicity, cost-effectiveness, and robustness, this method holds significant promise as an efficient means of producing cassava planting materials to meet diverse agricultural needs.

The tricot approach: an agile framework for decentralized on-farm testing supported by citizen science. A retrospective.

Matching crop varieties to their target use context and user preferences is a challenge faced by many plant breeding programs serving smallholder agriculture. Numerous participatory approaches proposed by CGIAR and other research teams over the last four decades have attempted to capture farmers' priorities/preferences and crop variety field performance in representative growing environments through experimental trials with higher external validity. Yet none have overcome the challenges of scalability, data validity and reliability, and difficulties in capturing socio-economic and environmental heterogeneity. Building on the strengths of these attempts, we developed a new data-generation approach, called triadic comparison of technology options (tricot). Tricot is a decentralized experimental approach supported by crowdsourced citizen science. In this article, we review the development, validation, and evolution of the tricot approach, through our own research results and reviewing the literature in which tricot approaches have been successfully applied. The first results indicated that tricot-aggregated farmer-led assessments contained information with adequate validity and that reliability could be achieved with a large sample. Costs were lower than current participatory approaches. Scaling the tricot approach into a large on-farm testing network successfully registered specific climatic effects of crop variety performance in representative growing environments. Tricot's recent application in plant breeding networks in relation to decision-making has (i) advanced plant breeding lines recognizing socio-economic heterogeneity, and (ii) identified consumers' preferences and market demands, generating alternative breeding design priorities. We review lessons learned from tricot applications that have enabled a large scaling effort, which should lead to stronger decision-making in crop improvement and increased use of improved varieties in smallholder agriculture.

Breedbase: a digital ecosystem for modern plant breeding.

Modern breeding methods integrate next-generation sequencing and phenomics to identify plants with the best characteristics and greatest genetic merit for use as parents in subsequent breeding cycles to ultimately create improved cultivars able to sustain high adoption rates by farmers. This data-driven approach hinges on strong foundations in data management, quality control, and analytics. Of crucial importance is a central database able to (1) track breeding materials, (2) store experimental evaluations, (3) record phenotypic measurements using consistent ontologies, (4) store genotypic information, and (5) implement algorithms for analysis, prediction, and selection decisions. Because of the complexity of the breeding process, breeding databases also tend to be complex, difficult, and expensive to implement and maintain. Here, we present a breeding database system, Breedbase (https://breedbase.org/, last accessed 4/18/2022). Originally initiated as Cassavabase (https://cassavabase.org/, last accessed 4/18/2022) with the NextGen Cassava project (https://www.nextgencassava.org/, last accessed 4/18/2022), and later developed into a crop-agnostic system, it is presently used by dozens of different crops and projects. The system is web based and is available as open source software. It is available on GitHub (https://github.com/solgenomics/, last accessed 4/18/2022) and packaged in a Docker image for deployment (https://hub.docker.com/u/breedbase, last accessed 4/18/2022). The Breedbase system enables breeding programs to better manage and leverage their data for decision making within a fully integrated digital ecosystem.

Genotype by environment cultivar evaluation for cassava brown streak disease resistance in Tanzania.

Cassava brown steak disease (CBSD), caused by Cassava brown streak virus (CBSV) and Ugandan cassava brown streak virus (UCBSV), is the most important biotic constraint to cassava production in East and Central Africa. Concerted efforts are required to prevent further spread into West Africa as well as to reduce losses in areas already affected. The study reported here was part of a five-country (Kenya, Malawi, Mozambique, Tanzania and Uganda) programme that aimed to identify superior cassava cultivars resistant to CBSD and to disseminate them widely in the region. Seventeen tissue-cultured and virus-tested cultivars were evaluated in Tanzania across nine sites with diverse CBSD inoculum conditions. Experiments were planted using an alpha-lattice design and assessments were made of surrounding inoculum pressure, CBSD foliar and root incidence and root yield at harvest. There were large differences in CBSD infection between sites, with greatest spread recorded from the north-western Lake (Victoria) zone. Differences were driven by Bemisia tabaci whitefly vector abundance and CBSD inoculum pressure. Both CBSV and UCBSV were almost equally represented in cassava fields surrounding experimental plots, although CBSV predominated in the north-west whilst UCBSV was more frequent in coastal and southern sites. However, the incidence of CBSV was much greater than that of UCBSV in initially virus-free experimental plots, suggesting that CBSV is more virulent. Cultivars could be categorised into three groups based on the degree of CBSD symptom expression in shoots and roots. The seven cultivars (F10_30R2, Eyope, Mkumba, Mkuranga1, Narocass1, Nase3 and Orera) in the most resistant category each had shoot and root incidences of less than 20%. Fresh root yield differed between sites and cultivars, but there was no genotype by environment interaction for this trait, probably attributable to the large fertility and soil moisture differences between sites. Susceptible cultivars and the local check performed well in the absence of CBSD pressure, highlighting the importance of exploiting quality and yield traits of local landraces in breeding programmes. Overall, our results emphasized the importance of applying a balanced strategy for CBSD management. This should use both improved and local germplasm resources to generate high yielding cultivars for specific end-user traits, and combine the deployment of improved cultivars with phytosanitary control measures including the use of healthy planting material and planting during periods of reduced CBSD infection.

Exchanging and managing in-vitro elite germplasm to combat Cassava Brown Streak Disease (CBSD) and Cassava Mosaic Disease (CMD) in Eastern and Southern Africa.

Cassava varieties resistant to cassava mosaic disease (CMD) and cassava brown streak disease (CBSD) are needed for the food and income security of the rural poor in eastern and southern Africa (ESA). The International Institute of Tropical Agriculture led five national cassava breeding programs (Malawi, Mozambique, Kenya, Tanzania and Uganda) in virus-cleaning and exchanging elite cassava germplasm resistant to both diseases. This paper documents the experiences and lessons learned from the process. Thirty-one clones (25 elite, two standard and four national) were submitted by the five breeding programs to the Natural Resources Institute and Kenya Plant Health Inspectorate Services for virus cleaning and indexing. Subsequently, ca 75 invitro virus-indexed plantlets per clone were sent to Genetic Technologies International Limited (GTIL), a private tissue culture (TC) lab in Kenya, and micro-propagated to produce ≥1500 plantlets. After fulfilling all the formal procedures of germplasm exchange between countries ≥300 plantlets per clone were sent to each partner country. National check clones susceptible to CMD/CBSD were sent only to their countries of origin. In each country, the in-vitro plantlets were acclimatized under screen house conditions and transferred to clean isolated sites for field multiplication. All the clones were cleaned of the viruses, except Tomo. The cleaning process was slow for F19-NL, NASE1, and Kibandameno and TC micro-propagation at GTIL was less efficient for Pwani, Tajirika, NASE1, and Okhumelela than for the other clones. Difficulties in cleaning recalcitrant clones affected the timeline for establishing the multi-site evaluation trials in target countries. The initiative is the one of the kind to successfully clean and exchange elite germplasm as a joint action to combat CBSD in ESA. Adequate preparation in terms of infrastructure and personnel are critical to successfully receiving and adapting the indexed in-vitro plants as new germplasm.

Risk assessment of gene flow from genetically engineered virus resistant cassava to wild relatives in Africa: an expert panel report.

The probability and consequences of gene flow to wild relatives is typically considered in the environmental risk assessment of genetically engineered crops. This is a report from a discussion by a group of experts who used a problem formulation approach to consider existing information for risk assessment of gene flow from cassava (Manihot esculenta) genetically engineered for virus resistance to the 'wild' (naturalized) relative M. glaziovii in East Africa. Two environmental harms were considered in this case: (1) loss of genetic diversity in the germplasm pool, and (2) loss of valued species, ecosystem resources, or crop yield and quality due to weediness or invasiveness of wild relatives. Based on existing information, it was concluded that gene flow will occur, but it is not likely that this will reduce the genetic diversity in the germplasm pool. There is little existing information about the impact of the virus in natural populations that could be used to inform a prediction about whether virus resistance would lead to an increase in reproduction or survival, hence abundance of M. glaziovii. However, an increase in the abundance of M. glaziovii should be manageable, and would not necessarily lead to the identified environmental harms.

An EST-derived SNP and SSR genetic linkage map of cassava (Manihot esculenta Crantz).

Cassava (Manihot esculenta Crantz) is one of the most important food security crops in the tropics and increasingly being adopted for agro-industrial processing. Genetic improvement of cassava can be enhanced through marker-assisted breeding. For this, appropriate genomic tools are required to dissect the genetic architecture of economically important traits. Here, a genome-wide SNP-based genetic map of cassava anchored in SSRs is presented. An outbreeder full-sib (F1) family was genotyped on two independent SNP assay platforms: an array of 1,536 SNPs on Illumina's GoldenGate platform was used to genotype a first batch of 60 F1. Of the 1,358 successfully converted SNPs, 600 which were polymorphic in at least one of the parents and was subsequently converted to KBiosciences' KASPar assay platform for genotyping 70 additional F1. High-precision genotyping of 163 informative SSRs using capillary electrophoresis was also carried out. Linkage analysis resulted in a final linkage map of 1,837 centi-Morgans (cM) containing 568 markers (434 SNPs and 134 SSRs) distributed across 19 linkage groups. The average distance between adjacent markers was 3.4 cM. About 94.2% of the mapped SNPs and SSRs have also been localized on scaffolds of version 4.1 assembly of the cassava draft genome sequence. This more saturated genetic linkage map of cassava that combines SSR and SNP markers should find several applications in the improvement of cassava including aligning scaffolds of the cassava genome sequence, genetic analyses of important agro-morphological traits, studying the linkage disequilibrium landscape and comparative genomics.