Preclinical evaluation of MC1R targeting theranostic pair [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH.

BACKGROUND: Targeted radionuclide therapy is established as a highly effective strategy for the treatment of metastatic tumors; however, the co-development of suitable imaging companions to therapy remains significant challenge. Theranostic isotopes of terbium (149Tb, 152Tb, 155Tb, 161Tb) have the potential to provide chemically identical radionuclidic pairs, which collectively encompass all modes of nuclear decay relevant to nuclear medicine. Herein, we report the first radiochemistry and preclinical studies involving 155Tb- and 161Tb-labeled crown-αMSH, a small peptide-based bioconjugate suitable for targeting melanoma. METHODS: 155Tb was produced via proton induced spallation of Ta targets using the isotope separation and acceleration facility at TRIUMF with isotope separation on-line (ISAC/ISOL). The radiolabeling characteristics of crown-αMSH with 155Tb and/or 161Tb were evaluated by concentration-dependence radiolabeling studies, and radio-HPLC stability studies. LogD7.4 measurements were obtained for [161Tb]Tb-crown-αMSH. Competitive binding assays were undertaken to determine the inhibition constant for [natTb]Tb-crown-αMSH in B16-F10 cells. Pre-clinical biodistribution and SPECT/CT imaging studies of 155Tb and 161Tb labeled crown-αMSH were undertaken in male C57Bl/6 J mice bearing B16-F10 melanoma tumors to evaluate tumor specific uptake and imaging potential for each radionuclide. RESULTS: Quantitative radiolabeling of crown-αMSH with [155Tb]Tb3+ and [161Tb]Tb3+ was demonstrated under mild conditions (RT, 10 min) and low chelator concentrations; achieving high molar activities (23-29 MBq/nmol). Radio-HPLC studies showed [161Tb]Tb-crown-αMSH maintains excellent radiochemical purity in human serum, while gradual metabolic degradation is observed in mouse serum. Competitive binding assays showed the high affinity of [natTb]Tb-crown-αMSH toward MC1R. Two different methods for preparation of the [155Tb]Tb-crown-αMSH radiotracer were investigated and the impacts on the biodistribution profile in tumor bearing mice is compared. Preclinical in vivo studies of 155Tb- and 161Tb- labeled crown-αMSH were performed in parallel, in mice bearing B16-F10 tumors; where the biodistribution results showed similar tumor specific uptake (6.06-7.44 %IA/g at 2 h pi) and very low uptake in nontarget organs. These results were further corroborated through a series of single-photon emission computed tomography (SPECT) studies, with [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH showing comparable uptake profiles and excellent image contrast. CONCLUSIONS: Collectively, our studies highlight the promising characteristics of [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH as theranostic pair for nuclear imaging (155Tb) and radionuclide therapy (161Tb).

Rearmed Bifunctional Chelating Ligand for 225Ac/155Tb Precision-Guided Theranostic Radiopharmaceuticals─H4noneunpaX.

Superior bifunctional chelating ligands, which can sequester both α-emitting radionuclides (225Ac, 213Bi) and their diagnostic companions (155Tb, 111In), remain a formidable challenge to translating targeted alpha therapy, with complementary diagnostic imaging, to the clinic. H4noneupaX, a chelating ligand with an unusual diametrically opposed arrangement of pendant donor groups, has been developed to this end. H4noneunpaX preferentially complexes Ln3+ and An3+ ions, forming thermodynamically stable (pLa = 17.8, pLu = 21.3) and kinetically inert complexes─single isomeric species by nuclear magnetic resonance and density functional theory. Metal binding versatility demonstrated in radiolabeling [111In]In3+, [155Tb]Tb3+, [177Lu]Lu3+, and [225Ac]Ac3+ achieved high molar activities under mild conditions. Efficient, scalable synthesis enabled in vivo evaluation of bifunctional H4noneunpaX conjugated to two octreotate peptides targeting neuroendocrine tumors. Single photon emission computed tomography/CT and biodistribution studies of 155Tb-radiotracers in AR42J tumor-bearing mice showed excellent image contrast, good tumor uptake, and high in vivo stability. H4noneunpaX shows significant potential for theranostic applications involving 225Ac/155Tb or 177Lu/155Tb.

Preclinical Evaluation of [155/161Tb]Tb-Crown-TATE-A Novel SPECT Imaging Theranostic Agent Targeting Neuroendocrine Tumours.

Terbium radioisotopes (149Tb, 152Tb, 155Tb, 161Tb) offer a unique class of radionuclides which encompass all four medicinally relevant nuclear decay modalities (α, ß+, γ, ß-/e-), and show high potential for the development of element-matched theranostic radiopharmaceuticals. The goal of this study was to design, synthesise, and evaluate the suitability of crown-TATE as a new peptide-conjugate for radiolabelling of [155Tb]Tb3+ and [161Tb]Tb3+, and to assess the imaging and pharmacokinetic properties of each radiotracer in tumour-bearing mice. [155Tb]Tb-crown-TATE and [161Tb]Tb-crown-TATE were prepared efficiently under mild conditions, and exhibited excellent stability in human serum (>99.5% RCP over 7 days). Longitudinal SPECT/CT images were acquired for 155Tb- and 161Tb- labelled crown-TATE in male NRG mice bearing AR42J tumours. The radiotracers, [155Tb]Tb-crown-TATE and [161Tb]Tb-crown-TATE, showed high tumour targeting (32.6 and 30.0 %ID/g, respectively) and minimal retention in non-target organs at 2.5 h post-administration. Biodistribution studies confirmed the SPECT/CT results, showing high tumour uptake (38.7 ± 8.0 %ID/g and 38.5 ± 3.5 %ID/g, respectively) and favourable tumour-to-background ratios. Blocking studies further confirmed SSTR2-specific tumour accumulation. Overall, these findings suggest that crown-TATE has great potential for element-matched molecular imaging and radionuclide therapy using 155Tb and 161Tb.

Comparative Study of a Decadentate Acyclic Chelate, HOPO-O10, and Its Octadentate Analogue, HOPO-O8, for Radiopharmaceutical Applications.

Radiolanthanides and actinides are aptly suited for the diagnosis and treatment of cancer via nuclear medicine because they possess unique chemical and physical properties (e.g., radioactive decay emissions). These rare radiometals have recently shown the potential to selectively deliver a radiation payload to cancer cells. However, their clinical success is highly dependent on finding a suitable ligand for stable chelation and conjugation to a disease-targeting vector. Currently, the commercially available chelates exploited in the radiopharmaceutical design do not fulfill all of the requirements for nuclear medicine applications, and there is a need to further explore their chemistry to rationally design highly specific chelates. Herein, we describe the rational design and chemical development of a novel decadentate acyclic chelate containing five 1,2-hydroxypyridinones, 3,4,3,3-(LI-1,2-HOPO), referred to herein as HOPO-O10, based on the well-known octadentate ligand 3,4,3-(LI-1,2-HOPO), referred to herein as HOPO-O8, a highly efficient chelator for 89Zr[Zr4+]. Analysis by 1H NMR spectroscopy and mass spectrometry of the La3+ and Tb3+ complexes revealed that HOPO-O10 forms bimetallic complexes compared to HOPO-O8, which only forms monometallic species. The radiolabeling properties of both chelates were screened with [135La]La3+, [155/161Tb]Tb3+, [225Ac]Ac3+ and, [227Th]Th4+. Comparable high specific activity was observed for the [155/161Tb]Tb3+ complexes, outperforming the gold-standard 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid, yet HOPO-O10 surpassed HOPO-O8 with higher [227Th]Th4+ affinity and improved complex stability in a human serum challenge assay. A comprehensive analysis of the decadentate and octadentate chelates was performed with density functional theory for the La3+, Ac3+, Eu3+, Tb3+, Lu3+, and Th4+ complexes. The computational simulations demonstrated the enhanced stability of Th4+-HOPO-O10 over Th4+-HOPO-O8. This investigation reveals the potential of HOPO-O10 for the stable chelation of large tetravalent radioactinides for nuclear medicine applications and provides insight for further chelate development.

SPECT imaging of226Ac as a theranostic isotope for225Ac radiopharmaceutical development.

Objective. The development of alpha-emitting radiopharmaceuticals using225Ac (t½ = 9.92 d) benefits from the quantitative determination of its biodistribution and is not always easy to directly measure. An element-equivalent matched-pair would allow for more accurate biodistribution and dosimetry estimates.226Ac (t½ = 29.4 h) is a candidate isotope forin vivoimaging of preclinical225Ac radiopharmaceuticals, given its 158 keV and 230 keV gamma emissions making it suitable for quantitative SPECT imaging. This work aimed to conduct a performance assessment for226Ac imaging and presents the first-ever226Ac SPECT images.Approach. To establish imaging performance with regards to contrast and noise, image quality phantoms were scanned using a microSPECT/CT system. To assess the resolution, a hot rod phantom with cylindrical rods with diameters between 0.85 and 1.70 mm was additionally imaged. Two collimators were evaluated: a high-energy ultra-high resolution (HEUHR) collimator and an extra ultra-high sensitivity (UHS) collimator. Images were reconstructed from two distinct photopeaks at 158 keV and 230 keV.Main results. The HEUHR SPECT image measurements of high activity concentration regions were consistent with values determined independently via gamma spectroscopy, within 9% error. The lower energy 158 keV photopeak images demonstrated slightly better contrast recovery. In the resolution phantom, the UHS collimator only resolved rods ≥1.30 mm and ≥1.50 mm for the 158 keV and 230 keV photopeaks, respectively, while the HEUHR collimator clearly resolved all rods, with resolution <0.85 mm.Significance. Overall, the feasibility of preclinical imaging with226Ac was demonstrated with quantitative SPECT imaging achieved for both its 158 keV and 230 keV photopeaks. The HEUHR collimator is recommended for imaging226Ac activity distributions in small animals due to its resolution <0.85 mm. Future work will explore the feasibility of using226Ac both as an element-equivalent isotope for225Ac radiopharmaceuticals, or as a standalone therapeutic isotope.

Potential for production of medical radionuclides with on-line isotope separation at the ISAC facility at TRIUMF and particular discussion of the examples of 165Er and 155Tb.

Production of medical radionuclides with ISOL facilities is a unique production method that may provide access to preclinical quantities of some rare and potent radionuclides for nuclear medicine. Particularly attention over the past years was focused on several promising candidates for Targeted Radionuclides Therapy (TRT). With this review, we provide some perspectives of using the TRIUMF ISOL facility (ISAC) to produce medical radionuclides for TRT application and highlight our current effort to collect of 165Er and 155Tb for Auger Therapy and SPECT imaging, respectively.

Evaluation of polydentate picolinic acid chelating ligands and an α-melanocyte-stimulating hormone derivative for targeted alpha therapy using ISOL-produced 225Ac.

BACKGROUND: Actinium-225 (225Ac, t1/2 = 9.9 d) is a promising candidate radionuclide for use in targeted alpha therapy (TAT), though the currently limited global supply has hindered the development of a suitable Ac-chelating ligand and 225Ac-radiopharmaceuticals towards the clinic. We at TRIUMF have leveraged our Isotope Separation On-Line (ISOL) facility to produce 225Ac and use the resulting radioactivity to screen a number of potential 225Ac-radiopharmaceutical compounds. RESULTS: MBq quantities of 225Ac and parent radium-225 (225Ra, t1/2 = 14.8 d) were produced and separated using solid phase extraction DGA resin, resulting in a radiochemically pure 225Ac product in > 98% yield and in an amenable form for radiolabeling of ligands and bioconjugates. Of the many polydentate picolinic acid ("pa") containing ligands evaluated (H4octapa [N4O4], H4CHXoctapa [N4O4], p-NO2-Bn-H4neunpa [N5O4], and H6phospa [N4O4]), all out-performed the current gold standard, DOTA for 225Ac radiolabeling ability at ambient temperature. Moreover, a melanocortin 1 receptor-targeting peptide conjugate, DOTA-modified cyclized α-melanocyte-stimulating hormone (DOTA-CycMSH), was radiolabeled with 225Ac and proof-of-principle biodistribution studies using B16F10 tumour-bearing mice were conducted. At 2 h post-injection, tumour-to-blood ratios of 20.4 ± 3.4 and 4.8 ± 2.4 were obtained for the non-blocking (molar activity [M.A.] > 200 kBq/nmol) and blocking (M.A. = 1.6 kBq/nmol) experiment, respectively. CONCLUSION: TRIUMF's ISOL facility is able to provide 225Ac suitable for preclinical screening of radiopharmaceutical compounds; [225Ac(octapa)]-, [225Ac(CHXoctapa)]-, and [225Ac(DOTA-CycMSH)] may be good candidates for further targeted alpha therapy studies.

Multi-isotope SPECT imaging of the 225Ac decay chain: feasibility studies.

Effective use of the [Formula: see text] decay chain in targeted internal radioimmunotherapy requires the retention of both [Formula: see text] and progeny isotopes at the target site. Imaging-based pharmacokinetic tests of these pharmaceuticals must therefore separately yet simultaneously image multiple isotopes that may not be colocalized despite being part of the same decay chain. This work presents feasibility studies demonstrating the ability of a microSPECT/CT scanner equipped with a high energy collimator to simultaneously image two components of the [Formula: see text] decay chain: [Formula: see text] (218 keV) and [Formula: see text] (440 keV). Image quality phantoms were used to assess the performance of two collimators for simultaneous [Formula: see text] and [Formula: see text] imaging in terms of contrast and noise. A hotrod resolution phantom containing clusters of thin rods with diameters ranging between 0.85 and 1.70 mm was used to assess resolution. To demonstrate ability to simultaneously image dynamic [Formula: see text] and [Formula: see text] activity distributions, a phantom containing a [Formula: see text] generator from [Formula: see text] was imaged. These tests were performed with two collimators, a high-energy ultra-high resolution (HEUHR) collimator and an ultra-high sensitivity (UHS) collimator. Values consistent with activity concentrations determined independently via gamma spectroscopy were observed in high activity regions of the images. In hotrod phantom images, the HEUHR collimator resolved all rods for both [Formula: see text] and [Formula: see text] images. With the UHS collimator, no rods were resolvable in [Formula: see text] images and only rods ⩾1.3 mm were resolved in [Formula: see text] images. After eluting the [Formula: see text] generator, images accurately visualized the reestablishment of transient equilibrium of the [Formula: see text] decay chain. The feasibility of evaluating the pharmacokinetics of the [Formula: see text] decay chain in vivo has been demonstrated. This presented method requires the use of a high-performance high-energy collimator.

Development of a preclinical 211Rn/211At generator system for targeted alpha therapy research with 211At.

INTRODUCTION: The availability of 211At for targeted alpha therapy research can be increased by the 211Rn/211At generator system, whereby 211At is produced by 211Rn electron capture decay. This study demonstrated the feasibility of using generator-produced 211At to label monoclonal antibody (BC8, anti-human CD45) for preclinical use, following isolation from the 207Po contamination also produced by these generators (by 211Rn α-decay). METHODS: 211Rn was produced by 211Fr electron capture decay following mass separated ion beam implantation and chemically isolated in liquid alkane hydrocarbon (dodecane). 211At produced by the resulting 211Rn source was extracted in strong base (2N NaOH) and purified by granular Te columns. BC8-B10 (antibody conjugated with closo-decaborate(2-)) was labeled with generator-produced 211At and purified by PD-10 columns. RESULTS: Aqueous solutions extracted from the generator were found to contain 211At and 207Po, isolated from 211Rn. High radionuclidic purity was obtained for 211At eluted from Te columns, from which BC8-B10 monoclonal antibody was successfully labeled. If not removed, 207Po was found to significantly contaminate the final 211At-BC8-B10 product. High yield efficiencies (decay-corrected, n=3) were achieved for 211At extraction from the generator (86%±7%), Te column purification (70%±10%), and antibody labeling (76%±2%). CONCLUSIONS: The experimental 211Rn/211At generator was shown to be well-suited for preclinical 211At-based research. ADVANCES IN KNOWLEDGE: We believe that these experiments have furthered the knowledge-base for expanding accessibility to 211At using the 211Rn/211At generator system. IMPLICATIONS FOR PATIENT CARE: As established by this work, the 211Rn/211At generator has the capability of facilitating preclinical evaluations of 211At-based therapies.

211Rn/211At and 209At production with intense mass separated Fr ion beams for preclinical 211At-based α-therapy research.

Mass-separated francium beams (211Fr or 213Fr) were implanted into solid targets for producing 211Rn (14.6h half-life) or 209At (5.41h), in situ. 211Rn was transferred to dodecane and isolated from contaminants, providing sources for 211At (7.21h) production by 211Rn decay (73%). 209At was recovered with high radionuclidic purity in aqueous solutions, directly. These experiments demonstrated Fr beam implantations as a novel method for producing preclinical quantities of 211Rn/211At (for therapy) and 209At (for imaging).

CO-releasing molecule (CORM) conjugate systems.

The development of CORMs (CO-releasing molecules) as a prodrug for CO administration in living organisms has attracted significant attention. CORMs offer the promising possibility of a safe and controllable release of CO in low amounts triggered by light, ligands, enzymes, etc. For the targeting of specific tissues or diseases and to prevent possible side effects from metals and other residues after CO release, these CORMs are attached to biocompatible systems, like peptides, polymers, nanoparticles, dendrimers, protein cages, non-wovens, tablets, and metal-organic frameworks. We discuss in this review the known CORM carrier conjugates, in short CORM conjugates, with covalently-bound or incorporated CORMs for medicinal and therapeutic applications. Most conjugates are nontoxic, show increasing half-lives of CO release, and make use of the EPR-effect, but still show problems because of a continuous background of CO release and the absence of an on/off-switch for the CO release.

Atom-at-a-time laser resonance ionization spectroscopy of nobelium.

Optical spectroscopy of a primordial isotope has traditionally formed the basis for understanding the atomic structure of an element. Such studies have been conducted for most elements and theoretical modelling can be performed to high precision, taking into account relativistic effects that scale approximately as the square of the atomic number. However, for the transfermium elements (those with atomic numbers greater than 100), the atomic structure is experimentally unknown. These radioactive elements are produced in nuclear fusion reactions at rates of only a few atoms per second at most and must be studied immediately following their production, which has so far precluded their optical spectroscopy. Here we report laser resonance ionization spectroscopy of nobelium (No; atomic number 102) in single-atom-at-a-time quantities, in which we identify the ground-state transition 1S01P1. By combining this result with data from an observed Rydberg series, we obtain an upper limit for the ionization potential of nobelium. These accurate results from direct laser excitations of outer-shell electrons cannot be achieved using state-of-the-art relativistic many-body calculations that include quantum electrodynamic effects, owing to large uncertainties in the modelled transition energies of the complex systems under consideration. Our work opens the door to high-precision measurements of various atomic and nuclear properties of elements heavier than nobelium, and motivates future theoretical work.

Synthesis of oxime-based CO-releasing molecules, CORMs and their immobilization on maghemite nanoparticles for magnetic-field induced CO release.

Oxime-based CO-releasing molecules (oximeCORMs) were immobilized with a catechol-modified backbone on maghemite iron oxide nanoparticles (IONPs) to give oximeCORM@IONP. The CO release from the free and immobilized oximeCORMs was measured using the standard myoglobin assay. The oximeCORM-nanoparticles were coated with dextran for improved water solubility and confined into an alginate shell for protection and separation from the surrounding myoglobin assay to allow for CO release studies by UV/Vis absorption without interference from highly-absorptive oximeCORM@IONP. Half-lifes of the oxime-based polymer-confined alginate@dextran@oximeCORM@IONPs were estimated at 20 °C to 814 ± 23 min, at 37 °C to 346 ± 83 min and at 50 °C to 73 ± 1 min. The alginate@dextran@oximeCORM@IONP composite showed a further decrease of the half-life of CO release to 153 ± 27 min at 37 °C through local magnetic heating of the susceptible iron oxide nanoparticles with application of an external alternating magnetic field (31.7 kA m(-1), 247 kHz, 39.9 mTesla). The activation energy for the CO release from molecular dicarbonylchlorido(imidazole-2-carbaldehydeoxime)(alkoxycarbonyl)ruthenium(ii) complexes is determined to be ∼100 kJ mol(-1) for five different imidazole-oxime derivatives.

Stabilizing Alginate Confinement and Polymer Coating of CO-Releasing Molecules Supported on Iron Oxide Nanoparticles To Trigger the CO Release by Magnetic Heating.

Maghemite (Fe2O3) iron oxide nanoparticles (IONPs) were synthesized, modified with covalent surface-bound CO-releasing molecules of a tri(carbonyl)-chlorido-phenylalaninato-ruthenium(II) complex (CORM), and coated with a dextran polymer. The time- and temperature-dependent CO release from this CORM-3 analogue was followed by a myoglobin assay. A new measurement method for the myoglobin assay was developed, based on confining "water-soluble" polymer-coated Dextran500k@CORM@IONP particles in hollow spheres of nontoxic and easily prepared calcium alginate. Dropping a mixture of Dextran500k@CORM@IONP and sodium alginate into a CaCl2 solution leads to stable hollow spheres of Ca(2+) cross-linked alginate which contain the Dextran500k@CORM@IONP particles. This "alginate-method" (i) protects CORM-3 analogues from rapid CO-displacement reactions with a protein, (ii) enables a spatial separation of the CORM from its surrounding myoglobin assay with the alginate acting as a CO-permeable membrane, and (iii) allows the use of substances with high absorptivity (such as iron oxide nanoparticles) in the myoglobin assay without interference in the optical path of the UV cell. Embedding the CORM@IONP nanoparticles in the alginate vessel represents a compartmentation of the reactive component and allows for close contact with, yet facile separation from, the surrounding myoglobin assay. The half-life of the CO release from Dextran500k@CORM@IONP particles surrounded by alginate was determined to be 890 ± 70 min at 20 °C. An acceleration of the CO release occurs at higher temperature with a half-life of 172 ± 27 min at 37 °C and 45 ± 7 min at 50 °C. The CO release can be triggered in an alternating current magnetic field (31.7 kA m(-1), 247 kHz, 39.9 mT) through local magnetic heating of the susceptible iron oxide nanoparticles. With magnetic heating at 20 °C in the bulk solution, the half-life of CO release from Dextran500k@CORM@IONP particles decreased to 155 ± 18 min without a noticeable temperature increase in the dispersion. At 37 and 50 °C, the half-life for the CO release triggered by local magnetic heating was 65 ± 5 min and 30 ± 3 min, respectively. Thus, at a physiological temperature of 37 °C, magnetic heating accelerates the CO release of the IONP-bound CORM by a factor of ∼ 2.6. The activation energy for CO release from a CORM-3 analogue was determined to be EA = 78 kJ/mol.

Nuclear and in-source laser spectroscopy with the ISAC yield station.

A new decay station has been built for the ISAC facility at TRIUMF for the rapid and reliable characterization of radioactive ion beam (RIB) compositions and intensities with the capability of simultaneously collecting α, ß, and γ decay data from RIB with intensities between a few and ≈10(11) ions per second. It features user-friendly control, data acquisition, and analysis software. The analysis of individual decay time structures allows the unambiguous assignment of α and γ lines even with substantial isobaric contamination present. The capability for accurate half-life measurements is demonstrated with the example of (46)K. The coupling of the yield station to the laser ion source, TRILIS, allows the correlation of radiometric data with automated laser frequency scans. First results of in-source laser spectroscopy measurements on astatine are discussed.

An ion guide laser ion source for isobar-suppressed rare isotope beams.

Modern experiments at isotope separator on-line (ISOL) facilities like ISAC at TRIUMF often depend critically on the purity of the delivered rare isotope beams. Therefore, highly selective ion sources are essential. This article presents the development and successful on-line operation of an ion guide laser ion source (IG-LIS) for the production of ion beams free of isobaric contamination. Thermionic ions from the hot ISOL target are suppressed by an electrostatic potential barrier, while neutral radio nuclides effusing out are resonantly ionized by laser radiation within a quadrupole ion guide behind this barrier. The IG-LIS was developed through detailed thermal and ion optics simulation studies and off-line tests with stable isotopes. In a first on-line run with a SiC target a suppression of surface-ionized Na contaminants in the ion beam of up to six orders of magnitude was demonstrated.

Metal carbonyls supported on iron oxide nanoparticles to trigger the CO-gasotransmitter release by magnetic heating.

Magnetic iron oxide, maghemite (Fe2O3) nanoparticles with covalent surface-bound CO-releasing molecules (CORMs) can be triggered to release CO through heating in an alternating magnetic field. In the proof-of-concept study the rate of CO-release from [RuCl(CO3)(µ-DOPA)]@maghemite nanoparticles was doubled upon exposure to an external alternating magnetic field (31.7 kAm(-1), 247 kHz, 25 °C, 39.9 mTesla, DOPA = dioxyphenyl-alaninato).

Tricarbonyl[tris(1-methyl-1H-imidazol-2-yl-κN(3))methanol]manganese(I) trifluoromethanesulfonate.

In the title compound, [Mn(C(13)H(16)N(6)O)(CO)(3)](CF(3)O(3)S), the Mn(I) atom has a slightly distorted octa-hedral geometry. The three CO ligands have C-Mn-C angles in the range 89.44 (10)-92.31 (9)°, while the three N atoms of the tripodal ligand form significantly smaller N-Mn-N angles of 82.76 (2)-85.51 (6)°. The three N atoms of the tripodal ligand and the three carbonyl ligands coordinate facially. In the crystal, the trifluoro-methane-sulfonate counter anion is connected by a medium-strength O-H⋯O hydrogen bond to the hydroxyl group of the manganese complex.

(Picolinato-κN,O)[tris(2-isopropyl-1H-imidazol-4-yl-κN)phosphane]cobalt(II) nitrate.

Single crystals of the title compound, [Co(C(6)H(4)NO(2))(C(18)H(27)N(6)P)]NO(3), were obtained from the reaction of nitrato[tris-(2-isopropyl-imidazol-4-yl)phosphane]cobalt(II) nitrate with picolinic acid in the presence of potassium tert-butoxide as base. The coordination polyhedron around the central Co(II) ion is about halfway between square-pyramidal and trigonal-bipyramidal geometry. In the structure, the nitrate counter-anion is connected by N-H⋯O hydrogen bonding to the complex cation. Additionally, the complex cations form one-dimensional chains along [010] by hydrogen bonding of the NH group of an imidazole ring to the picolinate group of a neighbouring complex cation.

Stabilisation of water-soluble platinum nanoparticles by phosphonic acid derivatives.

Sodium 2-(diphenylphosphino)ethyl phosphonate (1) was investigated as a stabilising agent for platinum nanoparticles (Pt-NPs) in aqueous solution. This phosphino phosphonate is known to stabilise rhodium nanoparticles (NPs) in water. Here we report that in the case of Pt-NPs this ligand is indirectly involved in the stabilisation mechanism and the actual stabilisation agent is the platinum complex Na(2)[Pt(1)(2)] (2). The reduction of platinum(II) salts in the presence of the phosphonates 1, 2, sodium 2-(diphenylphosphoryl)ethyl phosphonate (3) and 3,3,3-triphenylpropyl phosphonate (4) leads to stable platinum NPs with a remarkably narrow particle size distribution. These platinum NPs show high catalytic activity in the hydrogenation of 1-hexene and 1-chloro-3-nitrobenzene under biphasic as well as heterogeneous (supported on charcoal) conditions. The activity of the supported NPs was 30 times higher than the commercially available catalyst Pt(0) EnCat®. Furthermore, the single-crystal X-ray structures of (1)(MeOH)(2)(H(2)O)(2), (3)(H(2)O)(4), and (4)(2)(H(2)O)(17) have been determined.