Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
J Contemp Dent Pract ; 24(3): 153-156, 2023 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-37272125

RESUMEN

AIM: The purpose of the current research was to assess the permeability of three various desensitizing techniques on dentinal tubule occlusion using a scanning electron microscope (SEM). MATERIALS AND METHODS: For this research, 100 human sound premolar teeth that were extracted for orthodontic purposes were gathered. With the aid of a water-cooled diamond saw, the teeth were divided in a mesiodistal (vertically) orientation. A sectioned sample (5 mm long by 5 mm wide by 3.5 mm deep), including the cervical region, was taken from each buccal side. To fully open the dentinal tubules, these samples were then kept in 17% ethylenediaminetetraacetic acid (EDTA) for 40 minutes. The samples were divided into four groups (n = 25), each receiving the following dentin surface treatments: Group I: Control, Group II: Samples received NaF 5% varnish treatment, Group III: Samples received diode laser treatment, and Group IV: Samples received CPP-ACP treatment. An SEM was used to inspect each specimen at a magnification of about × 3000 and photomicrographs was assessed. RESULTS: The maximum occlusion of dentinal tubules was found in samples were treated with Diode laser (2.96 ± 0.14) followed by samples treated with NaF 5% varnish (3.38 ± 0.10), samples were treated with CPP-ACP (3.42 ± 0.06) and control group (4.26 ± 0.19). There was a statistically significant difference found between the groups. CONCLUSION: In conclusion, all three desensitizing methods used in the present study were successful in the occlusion of dentin tubules. But the application of the Diode laser was effective in the reduction of dentin permeability compared to NaF 5% varnish and CPP-ACP. CLINICAL SIGNIFICANCE: Dentin hypersensitivity (DH) is characterized by a brief period of intense discomfort. One approach to managing DH is to obstruct dentin tubules in order to decrease dentin permeability. There are many substances that can reduce hypersensitivity, but the finest commercially available substance for treating the condition by occluding the tubes should be acknowledged.


Asunto(s)
Sensibilidad de la Dentina , Dentina , Humanos , Microscopía Electrónica de Rastreo , Proyectos de Investigación , Permeabilidad
2.
J Pharm Bioallied Sci ; 13(Suppl 1): S629-S632, 2021 Jun.
Artículo en Inglés | MEDLINE | ID: mdl-34447168

RESUMEN

AIM: The aim of the study was to assess the reaction of different final irrigants to the bond strength of root dentin exposed to chloroform. MATERIALS AND METHODS: Fifty extracted maxillary central incisors were selected. Working length was determined, and canal was instrumented with ProTaper rotary system (Dentsply Maillefer) till F4 file. The specimens were then divided into five groups (n = 10). Group 1: not disclosed to any root canal solvent, Group 2: disclosed to chloroform for 5 min, Group 3: chloroform for 5 min followed by absolute alcohol, Group 4: chloroform for 5 min followed by chlorhexidine (CHX), And Group 5 - chloroform for 5 min followed by saline. The canals were obturated with F4 gutta-percha cones with AH Plus sealer. The samples will be sectioned horizontally into 1 ± 0.1 mm thick slices. The push-out bond strength was performed in a universal testing machine. Results were statistically analyzed by one-way analysis of variance. RESULTS: There existed a significant difference between the mean push-out bond strength of different groups. Irrigation with chloroform negatively affected the bonding between root canal sealer and root dentine. Absolute alcohol significantly improved the bond strength values. CONCLUSION: Exposure with chloroform during the retreatment will decrease the bonding between sealer (AH Plus) and root dentine. The use of absolute alcohol as a final irrigant improved the bonding between sealer and dentin. CHX and saline showed no improvement in bond strength.

3.
J Contemp Dent Pract ; 22(1): 80-83, 2021 Jan 01.
Artículo en Inglés | MEDLINE | ID: mdl-34002714

RESUMEN

AIM: The present study aimed to assess the sealing ability of various repair materials in furcation perforations using dye penetration. MATERIALS AND METHODS: A total of 80 human first molars from mandible with unbroken enamel surfaces, which were extracted completely for periodontal reasons, were chosen. All extracted teeth were kept in a sterile solution up until further use. Endo-access bur was used to prepare endodontic access cavity, and a high-speed long shank round bur was used to create a planned perforation on the floor of pulp. All the specimens were randomly grouped (20 teeth in each group): Group I: control; group II: Pro-Root MTA; group III: resin-modified glass-ionomer cement (RM GIC); and group IV: Biodentin. After placement of repair materials in perforated furcation, the chamber of each tooth was accessed with 2% methylene blue dye. Later, a diamond disk was used to split the teeth buccolingually. A stereomicroscope (10×) was used to visualize the highest dye penetration. RESULTS: The least penetration was seen in teeth repaired by Biodentin group (0.88 ± 0.02), next by Pro-Root MTA group (1.24 ± 0.13) and resin-modified glass ionomer cement group (3.62 ± 0.46). A statistically significant difference was seen among different perforation repair materials by analysis of variance. A statistically significant difference (p value < 0.05) was found between each group, excluding group II v/s group IV. CONCLUSION: This study concluded that reduced dye penetration in perforation repair along the furcations and improved sealing ability are shown by biodentine group in comparison to Pro-Root MTA and resin-modified glass-ionomer cement group. CLINICAL SIGNIFICANCE: Root perforations along the furcation that develop due to the endodontic procedures have a remarkable damaging effect on prognosis and frequently result in loss of secondary periodontal attachment, thus resulting in early loss of the involved tooth. Therefore, the selection of biocompatible repair material aids to enhance the treatment prognosis.


Asunto(s)
Filtración Dental , Materiales de Obturación del Conducto Radicular , Resinas Acrílicas , Compuestos de Calcio/uso terapéutico , Combinación de Medicamentos , Humanos , Diente Molar/cirugía , Óxidos , Silicatos , Raíz del Diente
4.
J Pharm Bioallied Sci ; 13(Suppl 2): S1696-S1699, 2021 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-35018057

RESUMEN

Assessment of growth factors with three different platelet preparations namely platelet rich fibrin, platelet rich plasma and lyophilized platelet-An invitro study Abstract Enhancing wound healing with patients own blood, particularly the platelet preparations have gained more popularity recently. These platelets excrete large amount of growth factors and cytokines that are associated with the healing process and regeneration. Even though these platelet concentrates are widely used in various forms, the mechanism behind that remains unclear. Therefore, this study aims at investigating the levels of growth factors in three different platelet preparations namely platelet rich plasma (PRP), platelet rich fibrin (PRF) and lyophilized platelets. Materials and Methods Autologous blood for preparing the platelet preparations was obtained from healthy donors aged between 25 to 35 years. The samples were then divided into three experimental groups. The preparation of PRP was done with the addition of anticoagulant and the PRF is prepared without adding it. The platelet counts in the blood were analyzed and the growth factors were quantitatively measured using ELISA reader. The statistical analysis was performed by using the Chi square test. Results In the quantitative analysis of growth factors LPL showed significant increase of the liberation of growth factors compared to PRP and PRF. Conclusions With the various recent advances in technologies for preparing these platelet concentrates this can be widely used in clinical practice more accurate in the future.

5.
J Contemp Dent Pract ; 21(11): 1233-1237, 2020 Nov 01.
Artículo en Inglés | MEDLINE | ID: mdl-33850068

RESUMEN

AIM AND OBJECTIVE: The present study aimed to assess the formation of microcracks in root dentin post-instrumentation with nickel-titanium (NiTi) hand and rotary file system. MATERIALS AND METHODS: Totally, 80 freshly extracted mandibular premolar teeth with single roots were chosen for this study. Access opening was performed and #10 K-file was used to attain patency of canal. All specimens were divided into four groups (each group having 20 specimens), i.e., Group I: Unprepared, Group II: NiTi hand K-files, Group III: Self-adjusting file, and Group IV: XP-Shaper single file. Complete irrigation of all the canals was performed after instrumentation. All roots were cut horizontally at three levels [apical third (3 mm), middle third (6 mm), and cervical third (9 mm)] from the apex with diamond disc. A stereomicroscope was used to view the sections under 20× magnification. RESULTS: Self-adjusting file showed least number of defects with a percentage of 75% followed by XP-Shaper and NiTi hand K-files with a values of 65 and 60%, respectively. Use of hand K-files resulted in greater number of incomplete cracks (30%) and use of XP-Shaper demonstrated greater number of craze lines (15%). A statistically significant difference was found between the experimental groups in the formation of dentinal defects of root at apical third (3 mm) (p < 0.031) and middle third (6 mm) (p < 0.001), whereas the sections at cervical third (9 mm) did not show any statistically significant difference (p > 0.312). CONCLUSION: The present study concluded that the self-adjusting file system gives promising better results in cleaning ability with minimal incidence of radicular dentin microcracks than XP-Shaper and NiTi hand K-files system. CLINICAL SIGNIFICANCE: The root dentin may unavoidably get damaged during instrumentation resulting in the formation of dentinal cracks and tiny complicated fractures, thus leading to endodontic failures. Various factors cause dentinal cracks, but the flexibility of file due to heat treatment, kinematics of the file, and the basic architecture of the file are the most significant ones. Self-adjusting file system represented satisfactory results with minimal microcracks defects.


Asunto(s)
Níquel , Preparación del Conducto Radicular , Cavidad Pulpar , Dentina , Titanio
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...