A High Aspect Ratio Bifurcated 128-Microchannel Microfluidic Device for Environmental Monitoring of Explosives.

Design and evolution of explosives monitoring and detection platforms to address the challenges of trace level chemical identification have led investigations into the use of intricately designed microfluidic devices. Microfluidic devices are unique tools that possess distinct characteristics that, when designed properly and configured with optical and fluidic components, can produce detection platforms with unmatched performance levels. Herein, we report the design, fabrication and integration of a bifurcated high aspect ratio microfluidic device containing 128 microchannels (40 mm × 40 µm × 250 µm; L × W × H) for explosives detection at trace levels. Aspect ratios measuring >6:1 support improved receptor-target molecule interactions, higher throughput and extremely low limits of detection (LOD). In addition to superior assay sensitivity, the bifurcated microfluidic device provides greater durability and versatility for substrate modification. Using the explosive 2,4,6-trinitrotoluene (TNT) as the model compound in a fluorescence-based displacement immunoassay, we report LODs for TNT at 10 parts-per-trillion (pptr) using a neutravidin-coated biotinylated anti-TNT microfluidic device. Solution to wall interactions were also simulated in COMSOL Multiphysics to understand fluid flow characteristics. Reynolds numbers were calculated to be 0.27⁻2.45 with a maximum pressure of 1.2 × 10-2 psi.

Multi-channeled single chain variable fragment (scFv) based microfluidic device for explosives detection.

The development of explosives detection technologies has increased significantly over the years as environmental and national security agencies implement tighter pollution control measures and methods for improving homeland security. 2, 4, 6-Trinitrotoluene (TNT), known primarily as a component in munitions, has been targeted for both its toxicity and carcinogenic properties that if present at high concentrations can be a detriment to both humans, marine and plant ecosystems. Enabling end users with environmental detection and monitoring systems capable of providing real-time, qualitative and quantitative chemical analysis of these toxic compounds would be extremely beneficial. Reported herein is the development of a multi-channeled microfluidic device immobilized with single chain fragment variable (scFv) recombinant proteins specific for the explosive, TNT. Fluorescence displacement immunoassays performed under constant flow demonstrated trace level sensitivity and specificity for TNT. The utility of three multi-channeled devices immobilized with either (1) scFv recombinant protein, (2) biotinylated-scFv (bt-scFv) and (3) monoclonal anti-TNT (whole IgG molecule) were investigated and compared. Fluorescence dose response curves, crossreactivity measurements and limits of detection (LOD) for TNT were determined. Fluorescence displacement immunoassays for TNT in natural seawater demonstrated detection limits at sub-parts-per-billion levels (0.5 ppb) utilizing the microfluidic device with immobilized bt-scFv.

Integrated metagenomic and metaproteomic analyses of marine biofilm communities.

Metagenomic and metaproteomic analyses were utilized to determine the composition and function of complex air-water interface biofilms sampled from the hulls of two US Navy destroyers. Prokaryotic community analyses using PhyloChip-based 16S rDNA profiling revealed two significantly different and taxonomically rich biofilm communities (6,942 taxa) in which the majority of unique taxa were ascribed to members of the Gammaproteobacteria, Alphaproteobacteria and Clostridia. Although metagenomic sequencing indicated that both biofilms were dominated by prokaryotic sequence reads (> 91%) with the majority of the bacterial reads belonging to the Alphaproteobacteria, the Ship-1 metagenome harbored greater organismal and functional diversity and was comparatively enriched for sequences from Cyanobacteria, Bacteroidetes and macroscopic eukaryotes, whereas the Ship-2 metagenome was enriched for sequences from Proteobacteria and microscopic photosynthetic eukaryotes. Qualitative liquid chromatography-tandem mass spectrometry metaproteome analyses identified 678 unique proteins, revealed little overlap in species and protein composition between the ships and contrasted with the metagenomic data in that ~80% of classified and annotated proteins were of eukaryotic origin and dominated by members of the Bacillariophyta, Cnidaria, Chordata and Arthropoda (data deposited to the ProteomeXchange, identifier PXD000961). Within the shared metaproteome, quantitative (18)O and iTRAQ analyses demonstrated a significantly greater abundance of structural proteins from macroscopic eukaryotes on Ship-1 and diatom photosynthesis proteins on Ship-2. Photosynthetic pigment composition and elemental analyses confirmed that both biofilms were dominated by phototrophic processes. These data begin to provide a better understanding of the complex organismal and biomolecular composition of marine biofilms while highlighting caveats in the interpretation of stand-alone environmental '-omics' datasets.

Detection of explosives in a dynamic marine environment using a moored TNT immunosensor.

A field demonstration and longevity assessment for long-term monitoring of the explosive 2,4,6-trinitrotoluene (TNT) in a marine environment using an anti-TNT microfluidic immunosensor is described. The TNT immunosensor is comprised of a microfluidic device with 39 parallel microchannels (2.5 cm × 250 µm × 500 µm, L × W × D) fabricated in poly(methylmethacrylate) (PMMA), then chemically functionalized with antibodies possessing a high affinity for TNT. Synthesized fluorescence reporter complexes used in a displacement-based assay format were used for TNT identification. For field deployment the TNT immunosensor was configured onto a submersible moored steel frame along with frame controller, pumps and TNT plume generator and deployed pier side for intermittent plume sampling of TNT (1h increments). Under varying current and tidal conditions trace levels of TNT in natural seawater were detected over an extended period (>18 h). Overnight operation and data recording was monitored via a web interface.

Reprint of "Which metaproteome? The impact of protein extraction bias on metaproteomic analyses".

Culture-independent techniques such as LC-MS/MS-based metaproteomic analyses are being increasingly utilized for the study of microbial composition and function in complex environmental samples. Although several studies have documented the many challenges and sources of bias that must be considered in these types of analyses, none have systematically characterized the effect of protein extraction bias on the biological interpretation of true environmental biofilm metaproteomes. In this study, we compared three protein extraction methods commonly used in the analyses of environmental samples [guanidine hydrochloride (GuHCl), B-PER, sequential citrate-phenol (SCP)] using nano-LC-MS/MS and an environmental marine biofilm to determine the unique biases introduced by each method and their effect on the interpretation of the derived metaproteomes. While the protein extraction efficiencies of the three methods ranged from 2.0 to 4.3%, there was little overlap in the sequence (1.9%), function (8.3% of total assigned protein families) and origin of the identified proteins from each extract. Each extraction method enriched for different protein families (GuHCl--photosynthesis, carbohydrate metabolism; B-PER--membrane transport, oxidative stress; SCP--calcium binding, structural) while 23.7-45.4% of the identified proteins lacked SwissProt annotations. Taken together, the results demonstrated that even the most basic interpretations of this complex microbial assemblage (species composition, ratio of prokaryotic to eukaryotic proteins, predominant functions) varied with little overlap based on the protein extraction method employed. These findings demonstrate the heavy influence of protein extraction on biofilm metaproteomics and provide caveats for the interpretation of such data sets when utilizing single protein extraction methods for the description of complex microbial assemblages.

Which metaproteome? The impact of protein extraction bias on metaproteomic analyses.

Culture-independent techniques such as LC-MS/MS-based metaproteomic analyses are being increasingly utilized for the study of microbial composition and function in complex environmental samples. Although several studies have documented the many challenges and sources of bias that must be considered in these types of analyses, none have systematically characterized the effect of protein extraction bias on the biological interpretation of true environmental biofilm metaproteomes. In this study, we compared three protein extraction methods commonly used in the analyses of environmental samples [guanidine hydrochloride (GuHCl), B-PER, sequential citrate-phenol (SCP)] using nano-LC-MS/MS and an environmental marine biofilm to determine the unique biases introduced by each method and their effect on the interpretation of the derived metaproteomes. While the protein extraction efficiencies of the three methods ranged from 2.0 to 4.3%, there was little overlap in the sequence (1.9%), function (8.3% of total assigned protein families) and origin of the identified proteins from each extract. Each extraction method enriched for different protein families (GuHCl - photosynthesis, carbohydrate metabolism; B-PER - membrane transport, oxidative stress; SCP - calcium binding, structural) while 23.7-45.4% of the identified proteins lacked SwissProt annotations. Taken together, the results demonstrated that even the most basic interpretations of this complex microbial assemblage (species composition, ratio of prokaryotic to eukaryotic proteins, predominant functions) varied with little overlap based on the protein extraction method employed. These findings demonstrate the heavy influence of protein extraction on biofilm metaproteomics and provide caveats for the interpretation of such data sets when utilizing single protein extraction methods for the description of complex microbial assemblages.

REMUS100 AUV with an integrated microfluidic system for explosives detection.

Quantitating explosive materials at trace concentrations in real-time on-site within the marine environment may prove critical to protecting civilians, waterways, and military personnel during this era of increased threat of widespread terroristic activity. Presented herein are results from recent field trials that demonstrate detection and quantitation of small nitroaromatic molecules using novel high-throughput microfluidic immunosensors (HTMI) to perform displacement-based immunoassays onboard a HYDROID REMUS100 autonomous underwater vehicle. Missions were conducted 2-3 m above the sea floor, and no HTMI failures were observed due to clogging from biomass infiltration. Additionally, no device leaks were observed during the trials. HTMIs maintained immunoassay functionality during 2 h deployments, while continuously sampling seawater absent without any pretreatment at a flow rate of 2 mL/min. This 20-fold increase in the nominal flow rate of the assay resulted in an order of magnitude reduction in both lag and assay times. Contaminated seawater that contained 20-175 ppb trinitrotoluene was analyzed.

Method development for metaproteomic analyses of marine biofilms.

The large-scale identification and quantitation of proteins via nanoliquid chromatography (LC)-tandem mass spectrometry (MS/MS) offers a unique opportunity to gain unprecedented insight into the microbial composition and biomolecular activity of true environmental samples. However, in order to realize this potential for marine biofilms, new methods of protein extraction must be developed as many compounds naturally present in biofilms are known to interfere with common proteomic manipulations and LC-MS/MS techniques. In this study, we used amino acid analyses (AAA) and LC-MS/MS to compare the efficacy of three sample preparation methods [6 M guanidine hydrochloride (GuHCl) protein extraction + in-solution digestion + 2D LC; sodium dodecyl sulfate (SDS) protein extraction + 1D gel LC; phenol protein extraction + 1D gel LC] for the metaproteomic analyses of an environmental marine biofilm. The AAA demonstrated that proteins constitute 1.24% of the biofilm wet weight and that the compared methods varied in their protein extraction efficiencies (0.85-15.15%). Subsequent LC-MS/MS analyses revealed that the GuHCl method resulted in the greatest number of proteins identified by one or more peptides whereas the phenol method provided the greatest sequence coverage of identified proteins. As expected, metagenomic sequencing of the same biofilm sample enabled the creation of a searchable database that increased the number of protein identifications by 48.7% (≥1 peptide) or 54.7% (≥2 peptides) when compared to SwissProt database identifications. Taken together, our results provide methods and evidence-based recommendations to consider for qualitative or quantitative biofilm metaproteome experimental design.

Demonstration of submersible high-throughput microfluidic immunosensors for underwater explosives detection.

Significant security threats posed by highly energetic nitroaromatic compounds in aquatic environments and the demilitarization and pending cleanup of areas previously used for munitions manufacture and storage represent a challenge for less expensive, faster, and more sensitive systems capable of analyzing groundwater and seawater samples for trace levels of explosive materials. Presented here is an inexpensive high throughput microfluidic immunosensor (HTMI) platform intended for the rapid, highly selective quantitation of nitroaromatic compounds in the field. Immunoaffinity and fluorescence detection schemes were implemented in tandem on a novel microfluidic device containing 39 parallel microchannels that were 500 µm tall, 250 µm wide, and 2.54 cm long with covalently tethered antibodies that was engineered for high-throughput high-volume sample processing. The devices were produced via a combination of high precision micromilling and hot embossing. Mass transfer limitations were found in conventional microsystems and were minimized due to higher surface area to volume ratios that exceeded those possessed by conventional microdevices and capillaries. Until now, these assays were limited to maximum total volume flow rates of ~1 mL/min due in part to kinetics and high head pressures of single microchannels. In the design demonstrated here, highly parallelized microchannels afforded up to a 100-fold increase in total volume flow rate while maintaining favorable kinetic constraints for efficient antigen-antibody interaction. The assay employed total volume throughput of up to 6 mL/min while yielding signal-to-noise ratios of >15 in all cases. In addition to samples being processed up to 60 times faster than in conventional displacement-based immunoassays, the current system was capable of quantitating 0.01 ng/mL TNT samples without implementing offline preconcentration, thereby, demonstrating the ability to improve sensitivity by as much as 2 orders of magnitude while decreasing total analysis times up to 60-fold.

Fluorescence-based sensing of 2,4,6-trinitrotoluene (TNT) using a multi-channeled poly(methyl methacrylate) (PMMA) microimmunosensor.

Fluorescence immunoassays employing monoclonal antibodies directed against the explosive 2,4,6-trinitrotoluene (TNT) were conducted in a multi-channel microimmunosensor. The multi-channel microimmunosensor was prepared in poly (methyl methacrylate) (PMMA) via hot embossing from a brass molding tool. The multi-channeled microfluidic device was sol-gel coated to generate a siloxane surface that provided a scaffold for antibody immobilization. AlexaFluor-cadaverine-trinitrobenzene (AlexaFluor-Cad-TNB) was used as the reporter molecule in a displacement immunoassay. The limit of detection was 1-10 ng/mL (ppb) with a linear dynamic range that covered three orders of magnitude. In addition, antibody crossreactivity was investigated using hexahydro-1,3,5-triazine (RDX), HMX, 2,4-dinitrotoluene (DNT), 4-nitrotoluene (4-NT) and 2-amino-4,6-DNT.

Discrimination between biothreat agents and 'near neighbor' species using a resequencing array.

Timely identification of biothreat organisms from large numbers of clinical or environmental samples in potential outbreak or attack scenario is critical for effective diagnosis and treatment. This study aims to evaluate the potential of resequencing arrays for this purpose. Albeit suboptimal, this report demonstrated that respiratory pathogen microarray version 1 can identify Bacillus anthracis, Francisella tularensis, Yersinia pestis and distinguish them from benign 'near neighbor' species in a single assay. Additionally, the sequence information can discriminate strains and possibly the sources of the strains. With further development, it is possible to use resequencing microarrays for biothreat surveillance.

Application of broad-spectrum, sequence-based pathogen identification in an urban population.

A broad spectrum detection platform that provides sequence level resolution of target regions would have a significant impact in public health, case management, and means of expanding our understanding of the etiology of diseases. A previously developed respiratory pathogen microarray (RPM v.1) demonstrated the capability of this platform for this purpose. This newly developed RPM v.1 was used to analyze 424 well-characterized nasal wash specimens from patients presenting with febrile respiratory illness in the Washington, D. C. metropolitan region. For each specimen, the RPM v.1 results were compared against composite reference assay (viral and bacterial culture and, where appropriate, RT-PCR/PCR) results. Across this panel, the RPM assay showed >or=98% overall agreement for all the organisms detected compared with reference methods. Additionally, the RPM v.1 results provide sequence information which allowed phylogenetic classification of circulating influenza A viruses in approximately 250 clinical specimens, and allowed monitoring the genetic variation as well as antigenic variability prediction. Multiple pathogens (2-4) were detected in 58 specimens (13.7%) with notably increased abundances of respiratory colonizers (esp. S. pneumoniae) during viral infection. This first-ever comparison of a broad-spectrum viral and bacterial identification technology of this type against a large battery of conventional "gold standard" assays confirms the utility of the approach for both medical surveillance and investigations of complex etiologies of illness caused by respiratory co-infections.

Self-assembled TNT biosensor based on modular multifunctional surface-tethered components.

We demonstrate a self-assembled reagentless biosensor based on a modular design strategy that functions in the detection of TNT and related explosive compounds. The sensor consists of a dye-labeled anti-TNT antibody fragment that interacts with a cofunctional surface-tethered DNA arm. The arm consists of a flexible biotinylated DNA oligonucleotide base specifically modified with a dye and terminating in a TNB recognition element, which is an analogue of TNT. Both of these elements are tethered to a Neutravidin surface with the TNB recognition element bound in the antibody fragment binding site, bringing the two dyes into proximity and establishing a baseline level of fluorescence resonance energy transfer (FRET). Addition of TNT, or related explosive compounds, to the sensor environment alters FRET in a concentration-dependent manner. The sensor can be regenerated repeatedly through washing away of analyte and specific reformation of the sensor assembly, allowing for subsequent detection events. Sensor dynamic range can be usefully altered through the addition of a DNA oligonucleotide that hybridizes to a portion of the cofunctional arm. The modular design of the sensor demonstrates that it can be easily adapted to detect a variety of different analytes.

Characterization and performance evaluation of in vivo and in vitro produced monoclonal anti-TNT antibodies for the detection of TNT.

In this paper are the experimental results used to characterize four distinct monoclonal anti-TNT antibodies (in vivo and in vitro cloned) for potential use in a field-portable immunosensor. Direct and competitive enzyme-linked immunosorbent assays (ELISA) were performed to determine their affinity for TNT and a fluorescently labeled analog of TNT for use in an immunosensor. Effective concentrations (EC(50)), inhibition concentration (IC(50)) and cross-reactivity measurements to related nitroaromatics (e.g., 2,4,6-trinitrobenzene [TNB], methyl-2,4,6-trinitrophenyl nitramine [tetryl], 2-amino-4,6-dinitrotoluene [2A-4,6-DNT], 2,4-dinitrotoluene [2,4-DNT] and 1,3-dinitrotoluene [1,3-DNT]) were measured. Final characterization of the monoclonal antibodies was based on performance (measured by fluorescence dose response) using a fluorescence-based microcapillary displacement assay. Analytical techniques showed a high degree of affinity for TNT and varying degrees of cross-reactivity with each respective monoclonal antibody. Microcapillary displacement immunoassays with each of the antibodies resulted in detection capabilities at the lowest applied TNT concentration (10 ng/ml).

Detection of 2,4,6-trinitrotoluene in environmental samples using a homogeneous fluoroimmunoassay.

We have tested both soil and water environmental samples for 2,4,6-trinitrotoluene (TNT) using a simple homogeneous assay. This assay is based on changes in fluorescence emission intensity when a fluorescently labeled TNT analogue, bound to an anti-TNT antibody, is competitively displaced by TNT. Fluoroimmunoassay results for TNT concentrations in diluted acetone extracts prepared from archived soils were in good agreement with the results from high-performance liquid chromatography analysis of the same sample extracts. In addition, assays of TNT-spiked environmental well water gave results essentially identical with assays conducted in a TNT-spiked laboratory buffer. The homogeneous fluoroimmunoassay, which is rapid, simple, sensitive, and amenable to high throughput screening, shows promise for near real-time evaluation of TNT contamination in environmental samples.

Non-aerosol detection of explosives with a continuous flow immunosensor.

Contamination of groundwater, soil, and the marine environment by explosives is a global issue. Identification, characterization and remediation are all required for a site recognized as contaminated with 2,4,6-trinitrotoluene (TNT) or hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). For each step, a method to accurately measure the contaminant level is needed. This paper reviews some of the current methods with emphasis on a single biosensor developed in our laboratory. Current regulatory methods require samples to be sent off-site to a certified laboratory resulting in time delays up to a month. A continuous flow biosensor for detection of explosives has been developed and tested for the rapid field screening of environmental samples. The detection system is based on a displacement immunoassay in which monoclonal antibodies to (TNT) and RDX are immobilized on solid substrates, allowed to bind fluorescently labeled antigens, and then exposed to explosives in aqueous samples. Explosive compounds present in the sample displace proportional amounts of the fluorescent label, which can then be measured to determine the original TNT or RDX concentration. The system can accurately detect ppb to ppt levels of explosives in groundwater or seawater samples and in extracts of contaminated soil. The biosensor has applications in environmental monitoring at remediation sites or in the location of underwater unexploded ordnance.

Fabrication of a capillary immunosensor in polymethyl methacrylate.

A method for fabricating capillary-based immunosensors in a coupon milled from an inexpensive, commodity plastic (PMMA, plexiglass) is demonstrated. The key feature of the technique is the use of sol-gel technology to deposit a glass-like (Si [bond] OH) film on surfaces of the plastic capillary channels to facilitate antibody immobilization. The utility of this method was demonstrated in the context of continuous flow displacement immunosensors for the explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). These sensors exhibited sensitivity to low microg/l RDX concentrations and peak-to-peak signal variations that were generally less than 10% for multiple injections at a single RDX concentration. The useful lifetime of the coupons in these experiments was greater than 10 h even after multiple exposures to high (1000 microg/l) RDX levels. This sensor platform has the physical characteristics needed for a portable field instrument: small, light-weight, and rugged.