RESUMEN
BACKGROUND: The National Institute of Standards and Technology (NIST) has produced over 40 botanical dietary supplement Standard Reference Materials® (SRMs) and reference materials (RMs) with values assigned for chemical markers and/or active compounds. Although environmental accumulation or inadvertent introduction of toxic elements (arsenic, cadmium, lead, and mercury) is a potential source of exposure in botanical dietary supplement products, the majority of the dietary supplement SRMs/RMs do not have values assigned for the four major toxic elements. OBJECTIVE: To determine As, Cd, Pb, and Hg content in the current inventory of NIST botanical dietary supplement SRMs/RMs. METHODS: Fifteen SRMs/RMs suites of plant part, extract, and finished products [i.e., solid oral dosage form (SODF)] were analyzed for As, Cd, Pb, and Hg using nitric acid microwave-assisted digestion followed by quantification using inductively coupled plasma-mass spectrometry. RESULTS: Results for control samples were in good agreement with certified values indicating that the analyses of 38 individual botanical SRMs/RMs were in control. Characterization of linked plant/extract SRMs/RMs derived from the same source materials demonstrated that while extraction processes can often yield extracts with lower toxic element content for Hg or As, it is also possible for mass fraction levels to remain unchanged or even increase following extraction. CONCLUSION: The results fill significant knowledge gaps in toxic element content ranges for SRMs/RMs where no NIST assigned values existed, in particular for Hg content and for extract and SODF matrices. With comprehensive toxic element content now available, researchers can better select appropriate dietary supplement SRMs/RMs for use as controls in the analysis of dietary supplement ingredients and products. HIGHLIGHTS: Results for As, Cd, Pb, and Hg are reported for 38 dietary supplement SRMs/RMs including 6 suites of plant, extract, and SODF and 9 pairs of plant and extract from the same batch of plant material.
RESUMEN
BACKGROUND: Dietary supplements derived from botanicals are commonly consumed and investigated in biomedical studies for their potential health benefits. Accurate identification and quantification of key chemical constituents from botanical ingredients is necessary for consistent product preparations and reproducible research results. Manufacturers need quantitative reference materials of the chemical constituents of interest to verify the content of ingredients and products. The rigor and reproducibility of biomedical research is enhanced through thorough characterization of the interventions used in mechanistic, clinical, and safety investigations. Quantitative reference materials enable reliable product quality assessments and reproducible research results. OBJECTIVE: Solution-based certified reference material (CRM) mixes were developed as calibrants for phytochemicals in ginger and kava. The kava CRM contained yangonin, desmethoxyyangonin, dihydrokavain, DL-kavain, methysticin, dihydromethysticin, flavokawain A, flavokawain B, and flavokawain C. The ginger CRM contained 6-gingerol, 8-gingerol, 10-gingerol, 6-shogaol, 8-shogaol, and 10-shogaol. METHODS: Each phytochemical was sourced as an isolated compound and assigned a purity factor by a mass balance approach accounting for residual impurities. The solution standard mixes were formulated by gravimetric addition of each phytochemical incorporating the purity factor and diluting with acetonitrile to the target concentrations of 500 µg/mL for the gingerols and shogaols, 250 µg/mL for the kavalactones, and 25 µg/mL for the flavokawains. RESULTS: The concentration accuracy of each component in the solution mixes was analytically verified by ultra high performance liquid chromatography with ultraviolet detection (UHPLC-UV) assay comparison to an independently prepared calibration solution. Each component in the ginger and kava CRMs were within 5 and 7% of the target concentrations, respectively. CONCLUSION: Homogeneous kava and ginger phytochemical solution mixes were produced with accurate constituent concentrations and demonstrated good stability over 2 years. These solution mixes were launched as commercially available CRMs. HIGHLIGHTS: These mixes can be used as accurate concentration stock solutions to prepare calibrators and controls for botanical dietary supplement product testing and standardization.
Asunto(s)
Alcoholes Grasos , Kava , Fitoquímicos , Estándares de Referencia , Zingiber officinale , Zingiber officinale/química , Kava/química , Fitoquímicos/análisis , Fitoquímicos/normas , Fitoquímicos/química , Alcoholes Grasos/análisis , Alcoholes Grasos/química , Catecoles/análisis , Catecoles/química , Catecoles/normas , Cromatografía Líquida de Alta Presión/métodos , Suplementos Dietéticos/análisis , Suplementos Dietéticos/normasRESUMEN
The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health, Office of Dietary Supplements (NIH ODS), introduced the first Standard Reference Material® (SRM) for determining vitamin D metabolites in 2009 motivated by significant concerns about the comparability and accuracy of different assays to assess vitamin D status. After 14 years, a suite of five serum matrix SRMs and three calibration solution SRMs are available. Values were also assigned for vitamin D metabolites in five additional SRMs intended primarily to support measurements of other clinical diagnostic markers. Both the SRMs and the certification approach have evolved from significant exogenous serum content to primarily endogenous content and from value assignment by combining the results of multiple analytical methods to the use of measurements exclusively from reference measurement procedures (RMPs). The impact of the availability of these SRMs can be assessed by both the distribution information (sales) and by reports in the scientific literature describing their use for method validation, quality control, and research. In this review, we describe the development of these SRMs, the evolution in design and value assignment, the expansion of information reported, and SRM use in validating analytical methods and providing quality assurance within the vitamin D measurement community.
Asunto(s)
Vitamina D , Vitaminas , Control de Calidad , Estándares de Referencia , Suplementos Dietéticos/análisisRESUMEN
The US National Institute of Standards and Technology (NIST) developed a Standard Reference Material® (SRM®) 3949 Folate Vitamers in Frozen Human Serum to replace SRM 1955 Homocysteine and Folate in Human Serum. The presence of increased endogenous levels of folic acid and 5-methyltetrahydrofolate (5mTHF) in SRM 3949, enhanced folate stability via addition of ascorbic acid, and inclusion of values for additional minor folates are improvements over SRM 1955 that should better serve the clinical folate measurement community. The new SRM contains folates at three levels. To produce SRM 3949, pilot sera were collected from 15 individual donors, 5 of whom were given a 400-µg folic acid supplement 1 h prior to blood draw to increase serum levels of 5mTHF and folic acid for the high-level material. To stabilize the folates, 0.5% (mass concentration) ascorbic acid was added as soon as possible after preparation of serum. These pilot sera were screened for five folates plus the pyrazino-s-triazine derivative of 4-α-hydroxy-5-methyltetrahydrofolate (MeFox) at the US Centers for Disease Control and Prevention (CDC) by isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS). Based on these results, a blending protocol was specified to obtain the three desired folate concentrations for SRM 3949. ID-LC-MS/MS analysis at the CDC and NIST was utilized to assign values for folic acid and 5mTHF, as well as several minor folates.
Asunto(s)
Ácido Fólico , Espectrometría de Masas en Tándem , Humanos , Ácido Fólico/análisis , Cromatografía Liquida/métodos , Espectrometría de Masas en Tándem/métodos , Estándares de Referencia , Ácido AscórbicoRESUMEN
BACKGROUND: In collaboration with the Office of Dietary Supplements at the National Institutes of Health, the National Institute of Standards and Technology issued a suite of botanical matrix reference materials (RMs) and Standard Reference Material® (SRM) for determination of isoflavones and toxic elements in kudzu dietary supplement ingredients. OBJECTIVE: RM 8650 Pueraria montana var. lobata (Kudzu) Rhizome, SRM 3268 Pueraria montana var. lobata (Kudzu) Extract, and RM 8652 Kudzu-Containing Solid Oral Dosage Form were issued with values assigned for isoflavones (puerarin, daidzin, and daidzein), toxic elements (arsenic, cadmium, and lead), and selenium. METHODS: Isoflavone values were assigned using liquid chromatography with UV absorbance or mass spectrometry detection. Element values were assigned using inductively coupled plasma mass spectrometry and results from an interlaboratory comparison exercise. RESULTS: Mass fractions for puerarin were 32.2 ± 3.2 mg/g, 128 ± 13 mg/g, and 68.2 ± 6.9 mg/g in RM 8650, SRM 3268, and RM 8652, respectively. Arsenic increases from 156 ± 14 ng/g to 849 ± 83 ng/g and cadmium decreases from 348 ± 14 ng/g to 82.1 ± 4.9 ng/g from rhizome to extract. CONCLUSION: The kudzu RM/SRM suite complements previously issued soy-related SRMs with values assigned for isoflavones, which have been studied for their potential health benefits, and expands the analytical resource by providing values for puerarin, an isoflavone not found in soy. HIGHLIGHTS: The three new kudzurmaterials are for use in the determination of isoflavones, toxic elements, and selenium. For the isoflavones, these new kudzu materials provide higher levels of daidzin and daidzein than existing soy-related SRMs, and they provide a value for an isoflavone not in existing SRMs (puerarin). Toxic elements in RM 8650 and SRM 3268 provide new botanical matrixes for use by dietary supplement manufacturers for the verification of the safety of their raw materials.
Asunto(s)
Arsénico , Isoflavonas , Pueraria , Selenio , Cadmio , Isoflavonas/análisis , Pueraria/químicaRESUMEN
The Vitamin D External Quality Assessment Scheme (DEQAS) distributes human serum samples four times per year to over 1000 participants worldwide for the determination of total serum 25-hydroxyvitamin D [25(OH)D)]. These samples are stored at -40 °C prior to distribution and the participants are instructed to store the samples frozen at -20 °C or lower after receipt; however, the samples are shipped to participants at ambient conditions (i.e., no temperature control). To address the question of whether shipment at ambient conditions is sufficient for reliable performance of various 25(OH)D assays, the equivalence of DEQAS human serum samples shipped under frozen and ambient conditions was assessed. As part of a Vitamin D Standardization Program (VDSP) commutability study, two sets of the same nine DEQAS samples were shipped to participants at ambient temperature and frozen on dry ice. Twenty-eight laboratories participated in this study and provided 34 sets of results for the measurement of 25(OH)D using 20 ligand binding assays and 14 liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods. Equivalence of the assay response for the frozen versus ambient DEQAS samples for each assay was evaluated using multi-level modeling, paired t-tests including a false discovery rate (FDR) approach, and ordinary least squares linear regression analysis of frozen versus ambient results. Using the paired t-test and confirmed by FDR testing, differences in the results for the ambient and frozen samples were found to be statistically significant at p < 0.05 for four assays (DiaSorin, DIAsource, Siemens, and SNIBE prototype). For all 14 LC-MS/MS assays, the differences in the results for the ambient- and frozen-shipped samples were not found to be significant at p < 0.05 indicating that these analytes were stable during shipment at ambient conditions. Even though assay results have been shown to vary considerably among different 25(OH)D assays in other studies, the results of this study also indicate that sample handling/transport conditions may influence 25(OH)D assay response for several assays.
Asunto(s)
Congelación , Vitamina D/análogos & derivados , Vitamina D/sangre , Cromatografía Liquida/métodos , Humanos , Espectrometría de Masas en Tándem/métodosRESUMEN
An interlaboratory comparison study was conducted by the Vitamin D Standardization Program (VDSP) to assess the performance of liquid chromatography - tandem mass spectrometry (LC-MS/MS) assays used for the determination of serum total 25-hydroxyvitamin D (25(OH)D), which is the sum of 25-hydroxyvitamin D2 (25(OH)D2) and 25-hydroxyvitamin D3 (25(OH)D3). A set of 50 single-donor samples was assigned target values for concentrations of 25(OH)D2, 25(OH)D3, 3-epi-25-hydroxyvitamin D3 (3-epi-25(OH)D3), and 24R,25-dihydroxyvitamin D3 (24R,25(OH)2D3) using isotope dilution liquid chromatography - tandem mass spectrometry (ID LC-MS/MS). VDSP Intercomparison Study 2 Part 1 includes results from 14 laboratories using 14 custom LC-MS/MS assays. Assay performance was evaluated using mean % bias compared to the assigned target values and using linear regression analysis of the test assay mean results and the target values. Only 53% of the LC-MS/MS assays met the VDSP criterion of mean % bias ≤ |±5%|. For the LC-MS/MS assays not meeting the ≤ |±5%| criterion, four assays had mean % bias of between 12 and 21%. Based on multivariable regression analysis using the concentrations of the four individual vitamin D metabolites in the 50 single-donor samples, the performance of several LC-MS/MS assays was found to be influenced by the presence of 3-epi-25(OH)D3. The results of this interlaboratory study represent the most comprehensive comparison of LC-MS/MS assay performance for serum total 25(OH)D and document the significant impact of the lack of separation of 3-epi-25(OH)D3 and 25(OH)D3 on assay performance, particularly with regard to mean % bias.
Asunto(s)
Espectrometría de Masas en Tándem , Vitamina D , 25-Hidroxivitamina D 2 , Cromatografía Liquida/métodos , Estándares de Referencia , Espectrometría de Masas en Tándem/métodos , Vitamina D/análogos & derivadosRESUMEN
An interlaboratory comparison study was conducted by the Vitamin D Standardization Program (VDSP) to assess the performance of ligand binding assays (Part 2) for the determination of serum total 25-hydroxyvitamin D [25(OH)D]. Fifty single-donor samples were assigned target values for concentrations of 25-hydroxyvitamin D2 [25(OH)D2], 25-hydroxyvitamin D3 [25(OH)D3], 3-epi-25-hydroxyvitamin D3 [3-epi-25(OH)D3], and 24R,25-dihydroxyvitamin D3 [24R,25(OH)2D3] using isotope dilution liquid chromatography-tandem mass spectrometry (ID LC-MS/MS). VDSP Intercomparison Study 2 Part 2 includes results from 17 laboratories using 32 ligand binding assays. Assay performance was evaluated using mean % bias compared to the assigned target values and using linear regression analysis of the test assay mean results and the target values. Only 50% of the ligand binding assays achieved the VDSP criterion of mean % bias ≤ |± 5%|. For the 13 unique ligand binding assays evaluated in this study, only 4 assays were consistently within ± 5% mean bias and 4 assays were consistently outside ± 5% mean bias regardless of the laboratory performing the assay. Based on multivariable regression analysis using the concentrations of individual vitamin D metabolites in the 50 single-donor samples, most assays underestimate 25(OH)D2 and several assays (Abbott, bioMérieux, DiaSorin, IDS-EIA, and IDS-iSYS) may have cross-reactivity from 24R,25(OH)2D3. The results of this interlaboratory study represent the most comprehensive comparison of 25(OH)D ligand binding assays published to date and is the only study to assess the impact of 24R,25(OH)2D3 content using results from a reference measurement procedure.
Asunto(s)
Espectrometría de Masas en Tándem , Vitamina D , 25-Hidroxivitamina D 2 , Cromatografía Liquida , Ligandos , Estándares de Referencia , Vitamina D/análogos & derivadosRESUMEN
Insufficient assessment of the identity and chemical composition of complex natural products, including botanicals, herbal remedies, and dietary supplements, hinders reproducible research and limits understanding mechanism(s) of action and health outcomes, which in turn impede improvements in clinical practice and advances in public health. This review describes available analytical resources and good methodological practices that support natural product characterization and strengthen the knowledge gained for designing and interpreting safety and efficacy investigations. The practice of validating analytical methods demonstrates that measurements of constituents of interest are reproducible and appropriate for the sample (e.g., plant material, phytochemical extract, and biological specimen). In particular, the utilization of matrix-based reference materials enables researchers to assess the accuracy, precision, and sensitivity of analytical measurements of natural product constituents, including dietary ingredients and their metabolites. Select case studies are presented where the careful application of these resources and practices has enhanced experimental rigor and benefited research on dietary supplement health effects.
RESUMEN
An interlaboratory study was conducted through the Vitamin D Standardization Program (VDSP) to assess commutability of Standard Reference Materials® (SRMs) and proficiency testing/external quality assessment (PT/EQA) samples for determination of serum total 25-hydroxyvitamin D [25(OH)D] using ligand binding assays and liquid chromatography-tandem mass spectrometry (LC-MS/MS). A set of 50 single-donor serum samples were assigned target values for 25-hydroxyvitamin D2 [25(OH)D2] and 25-hydroxyvitamin D3 [25(OH)D3] using reference measurement procedures (RMPs). SRM and PT/EQA samples evaluated included SRM 972a (four levels), SRM 2973, six College of American Pathologists (CAP) Accuracy-Based Vitamin D (ABVD) samples, and nine Vitamin D External Quality Assessment Scheme (DEQAS) samples. Results were received from 28 different laboratories using 20 ligand binding assays and 14 LC-MS/MS methods. Using the test assay results for total serum 25(OH)D (i.e., the sum of 25(OH)D2 and 25(OH)D3) determined for the single-donor samples and the RMP target values, the linear regression and 95% prediction intervals (PIs) were calculated. Using a subset of 42 samples that had concentrations of 25(OH)D2 below 30 nmol/L, one or more of the SRM and PT/EQA samples with high concentrations of 25(OH)D2 were deemed non-commutable using 5 of 11 unique ligand binding assays. SRM 972a (level 4), which has high exogenous concentration of 3-epi-25(OH)D3, was deemed non-commutable for 50% of the LC-MS/MS assays.
Asunto(s)
Sociedades Médicas/normas , Vitamina D/análogos & derivados , Vitamina D/química , Humanos , Estándares de Referencia , Manejo de Especímenes , Vitamina D/sangreRESUMEN
An intralaboratory study assessing assay variability and bias for determination of serum total 25-hydroxyvitamin D [25(OH)D] was conducted by the Vitamin D Standardization Program (VDSP). Thirteen assays for serum total 25(OH)D were evaluated in a single laboratory including 11 unique immunoassays and one liquid chromatography - tandem mass spectrometry (LC-MS/MS) assay. Fifty single-donor serum samples, including eight samples with high concentrations of 25(OH)D2 (> 30â¯nmol/L), were assigned target values for 25(OH)D2 and 25(OH)D3 using reference measurement procedures (RMP). Using four replicate measurements for each sample, the mean total percent coefficient of variation (%CV) and mean % bias from the target values were determined for each assay using the 50 single-donor samples and a 42-sample subset, which excluded 8 high 25(OH)D2 concentration samples, and compared with VDSP performance criteria of ≤ 10 % CV and ≤ ±5 % mean bias. All 12 assays achieved the performance criterion for % CV, and 9 of the 12 assays were within ≤ ±5 % mean bias. The Fujirebio Inc. assay exhibited the lowest %CV and highest percentage of individual measurements within ≤ ±5 % mean bias. Ten immunoassays exhibited changes in response due to the high 25(OH)D2 samples with Abbott, Biomérieux, DiaSorin, DIAsource, and IDS-iSYS assays having the largest deviations. The Fujirebio Inc. and Beckman Coulter assays were only minimally affected by the presence of the high 25(OH)D2 samples. Samples with high concentrations of 25(OH)D2 provided a critical performance test for immunoassays indicating that some assays may not have equal response or recovery for 25(OH)D2 and 25(OH)D3.
Asunto(s)
Bioensayo/normas , Inmunoensayo/normas , Vitamina D/análogos & derivados , Vitaminas/sangre , Sesgo , Cromatografía Liquida , Humanos , Laboratorios , Estándares de Referencia , Reproducibilidad de los Resultados , Espectrometría de Masas en Tándem , Vitamina D/sangreRESUMEN
The increased utilization of metrology resources and expanded application of its' approaches in the development of internationally agreed upon measurements can lay the basis for regulatory harmonization, support reproducible research, and advance scientific understanding, especially of dietary supplements and herbal medicines. Yet, metrology is often underappreciated and underutilized in dealing with the many challenges presented by these chemically complex preparations. This article discusses the utility of applying rigorous analytical techniques and adopting metrological principles more widely in studying dietary supplement products and ingredients, particularly medicinal plants and other botanicals. An assessment of current and emerging dietary supplement characterization methods is provided, including targeted and non-targeted techniques, as well as data analysis and evaluation approaches, with a focus on chemometrics, toxicity, dosage form performance, and data management. Quality assessment, statistical methods, and optimized methods for data management are also discussed. Case studies provide examples of applying metrological principles in thorough analytical characterization of supplement composition to clarify their health effects. A new frontier for metrology in dietary supplement science is described, including opportunities to improve methods for analysis and data management, development of relevant standards and good practices, and communication of these developments to researchers and analysts, as well as to regulatory and policy decision makers in the public and private sectors. The promotion of closer interactions between analytical, clinical, and pharmaceutical scientists who are involved in research and product development with metrologists who develop standards and methodological guidelines is critical to advance research on dietary supplement characterization and health effects.
RESUMEN
Approved performance quality tests are lacking in the United States Pharmacopeia (USP) for dietary supplements (DSs) containing green tea extracts. We evaluated the applicability of USP <2040 > general chapter protocols for disintegration and dissolution testing of botanicals to GT DSs. Of 28 single-ingredient GT DSs tested in 2 to 4 lots, 9 (32.1%) always passed the disintegration test, 8 (28.6%) always failed, and 11 (39.3%) showed inconsistent results. Of 34 multi-ingredient DSs tested in 2 lots, 21 (61.8%) passed and 8 (23.5%) failed in both lots, and 5 (14.7%) exhibited inconsistent performance. When stronger destructive forces were applied (disk added), all of the capsules that had failed initially, but not the tablets, passed. In dissolution testing, for the release of epigallocatechin-3-gallate (EGCG), only 6 of 20 single-ingredient DSs passed. Unexpectedly, with the addition of pepsin (prescribed by USP), only one additional DS passed. These results raise concerns that EGCG was not released properly from GT DS dosage forms. However, the general USP protocols may be inadequate for this botanical. More biorelevant destructive forces may be needed to break down capsules and tablets strengthened by the EGCG's interaction with shell material and to overcome the inhibition of digestive enzymes by EGCG.
Asunto(s)
Suplementos Dietéticos , Té , Cápsulas , Solubilidad , Comprimidos , Estados UnidosRESUMEN
Voltage-dependent anion channel (VDAC) is the major pathway for the transport of ions and metabolites across the mitochondrial outer membrane. Among the three known mammalian VDAC isoforms, VDAC3 is the least characterized, but unique functional roles have been proposed in cellular and animal models. Yet, a high-sequence similarity between VDAC1 and VDAC3 is indicative of a similar pore-forming structure. Here, we conclusively show that VDAC3 forms stable, highly conductive voltage-gated channels that, much like VDAC1, are weakly anion selective and facilitate metabolite exchange, but exhibit unique properties when interacting with the cytosolic proteins α-synuclein and tubulin. These two proteins are known to be potent regulators of VDAC1 and induce similar characteristic blockages (on the millisecond time scale) of VDAC3, but with 10- to 100-fold reduced on-rates and altered α-synuclein blocking times, indicative of an isoform-specific function. Through cysteine scanning mutagenesis, we found that VDAC3's cysteine residues regulate its interaction with α-synuclein, demonstrating VDAC3-unique functional properties and further highlighting a general molecular mechanism for VDAC isoform-specific regulation of mitochondrial bioenergetics.
Asunto(s)
Citosol/metabolismo , Mitocondrias/metabolismo , Proteínas de Transporte de Membrana Mitocondrial/metabolismo , Proteínas Mitocondriales/metabolismo , Isoformas de Proteínas/metabolismo , Canales Aniónicos Dependientes del Voltaje/metabolismo , Animales , Biología/métodos , Cisteína/metabolismo , Humanos , Ratones , Sinucleínas/metabolismo , Canal Aniónico 1 Dependiente del Voltaje/metabolismoRESUMEN
While great interest in health effects of natural product (NP) including dietary supplements and foods persists, promising preclinical NP research is not consistently translating into actionable clinical trial (CT) outcomes. Generally considered the gold standard for assessing safety and efficacy, CTs, especially phase III CTs, are costly and require rigorous planning to optimize the value of the information obtained. More effective bridging from NP research to CT was the goal of a September, 2018 transdisciplinary workshop. Participants emphasized that replicability and likelihood of successful translation depend on rigor in experimental design, interpretation, and reporting across the continuum of NP research. Discussions spanned good practices for NP characterization and quality control; use and interpretation of models (computational through in vivo) with strong clinical predictive validity; controls for experimental artefacts, especially for in vitro interrogation of bioactivity and mechanisms of action; rigorous assessment and interpretation of prior research; transparency in all reporting; and prioritization of research questions. Natural product clinical trials prioritized based on rigorous, convergent supporting data and current public health needs are most likely to be informative and ultimately affect public health. Thoughtful, coordinated implementation of these practices should enhance the knowledge gained from future NP research.
Asunto(s)
Productos Biológicos/farmacología , Investigación Biomédica Traslacional/normas , Animales , Evaluación Preclínica de Medicamentos , Etnobotánica , HumanosRESUMEN
Objective: To describe the history, key features, recent enhancements, and common applications of the Dietary Supplement Label Database (DSLD). Background and History: Although many Americans use dietary supplements, databases of dietary supplements sold in the United States have not been widely available. The DSLD, an easily accessible public-use database was created in 2008 to provide information on dietary supplement composition for use by researchers and consumers. Rationale: Accessing current information easily and quickly is crucial for documenting exposures to dietary supplements because they contain nutrients and other bioactive ingredients that may have beneficial or adverse effects on human health. This manuscript details recent developments with the DSLD to achieve this goal and provides examples of how the DSLD has been used. Recent Developments: With periodic updates to track changes in product composition and capture new products entering the market, the DSLD currently contains more than 71,000 dietary supplement labels. Following usability testing with consumer and researcher user groups completed in 2016, improvements to the DSLD interface were made. As of 2017, both a desktop and mobile device version are now available. Since its inception in 2008, the use of the DSLD has included research, exposure monitoring, and other purposes by users in the public and private sectors. Future Directions: Further refinement of the user interface and search features to facilitate ease of use for stakeholders is planned. Conclusions: The DSLD can be used to track changes in product composition and capture new products entering the market. With over 71,000 DS labels it is a unique resource that policymakers, researchers, clinicians, and consumers may find valuable for multiple applications.