Designing Non-charging Surfaces from Non-conductive Polymers.

Polymers that prevent the generation of static charge by contact electrification can be fabricated by copolymerizing an appropriate proportion of a molecule that has the tendency to charge positively, and a molecule that has the tendency to charge negatively, against a reference material. These non-conductive polymers resist charging by contact or rubbing, and prevent the adhesion of microscopic particles.

Tilted Magnetic Levitation Enables Measurement of the Complete Range of Densities of Materials with Low Magnetic Permeability.

Magnetic levitation (MagLev) of diamagnetic or weakly paramagnetic materials suspended in a paramagnetic solution in a magnetic field gradient provides a simple method to measure the density of small samples of solids or liquids. One major limitation of this method, thus far, has been an inability to measure or manipulate materials outside of a narrow range of densities (0.8 g/cm(3) < ρ < 2.3 g/cm(3)) that are close in density to the suspending, aqueous medium. This paper explores a simple method-"tilted MagLev"-to increase the range of densities that can be levitated magnetically. Tilting the MagLev device relative to the gravitational vector enables the magnetic force to be decreased (relative to the magnetic force) along the axis of measurement. This approach enables many practical measurements over the entire range of densities observed in matter at ambient conditions-from air bubbles (ρ ≈ 0) to osmium and iridium (ρ ≈ 23 g/cm(3)). The ability to levitate, simultaneously, objects with a broad range of different densities provides an operationally simple method that may find application to forensic science (e.g., for identifying the composition of miscellaneous objects or powders), industrial manufacturing (e.g., for quality control of parts), or resource-limited settings (e.g., for identifying and separating small particles of metals and alloys).

Rectification in tunneling junctions: 2,2'-bipyridyl-terminated n-alkanethiolates.

Molecular rectification is a particularly attractive phenomenon to examine in studying structure-property relationships in charge transport across molecular junctions, since the tunneling currents across the same molecular junction are measured, with only a change in the sign of the bias, with the same electrodes, molecule(s), and contacts. This type of experiment minimizes the complexities arising from measurements of current densities at one polarity using replicate junctions. This paper describes a new organic molecular rectifier: a junction having the structure Ag(TS)/S(CH2)11-4-methyl-2,2'-bipyridyl//Ga2O3/EGaIn (Ag(TS): template-stripped silver substrate; EGaIn: eutectic gallium-indium alloy) which shows reproducible rectification with a mean r(+) = |J(+1.0 V)|/|J(-1.0 V)| = 85 ± 2. This system is important because rectification occurs at a polarity opposite to that of the analogous but much more extensively studied systems based on ferrocene. It establishes (again) that rectification is due to the SAM, and not to redox reactions involving the Ga2O3 film, and confirms that rectification is not related to the polarity in the junction. Comparisons among SAM-based junctions incorporating the Ga2O3/EGaIn top electrode and a variety of heterocyclic terminal groups indicate that the metal-free bipyridyl group, not other features of the junction, is responsible for the rectification. The paper also describes a structural and mechanistic hypothesis that suggests a partial rationalization of values of rectification available in the literature.

Using "click-e-bricks" to make 3D elastomeric structures.

Soft, 3D elastomeric structures and composite structures are easy to fabricate using click-e-bricks, and the internal architecture of these structures together with the capabilities built into the bricks themselves provide mechanical, optical, electrical, and fluidic functions.

Catalytic asymmetric transannulation of NH-1,2,3-triazoles with olefins.

A convenient one-pot asymmetric synthesis of 2,3-dihydropyrroles from in situ generated triflated triazoles and olefins is described that further expands the utility of azavinyl carbene chemistry and provides access to an important class of cyclic enamides. Mechanistic investigations support the involvement of triflated cyclopropylaldimine intermediates in the formation of 2,3-dihydropyrrole. To the best of our knowledge, this is the first example of a chiral Brønsted acid catalyzed rearrangement of cyclopropylimines into enantioenriched 2,3-dihydropyrroles.

Mid-infrared spectrometer using opto-nanofluidic slot-waveguide for label-free on-chip chemical sensing.

A mid-infrared (mid-IR) spectrometer for label-free on-chip chemical sensing was developed using an engineered nanofluidic channel consisting of a Si-liquid-Si slot-structure. Utilizing the large refractive index contrast (Δn ∼ 2) between the liquid core of the waveguide and the Si cladding, a broadband mid-IR lightwave can be efficiently guided and confined within a nanofluidic capillary (≤100 nm wide). The optical-field enhancement, together with the direct interaction between the probe light and the analyte, increased the sensitivity for chemical detection by 50 times when compared to evanescent-wave sensing. This spectrometer distinguished several common organic liquids (e.g., n-bromohexane, toluene, isopropanol) accurately and could determine the ratio of chemical species (e.g., acetonitrile and ethanol) at low concentration (<5 µL/mL) in a mixture through spectral scanning over their characteristic absorption peaks in the mid-IR regime. The combination of CMOS-compatible planar mid-IR microphotonics, and a high-throughput nanofluidic sensor system, provides a unique platform for chemical detection.

Transannulation of 1-sulfonyl-1,2,3-triazoles with heterocumulenes.

Readily available 1-mesyl-1,2,3-triazoles are efficiently converted into a variety of imidazolones and thiazoles by Rh(II)-catalyzed denitrogenative reactions with isocyanates and isothiocyanates, respectively. The proposed triazole-diazoimine equilibrium results in the formation of highly reactive azavinyl metal-carbenes, which react with heterocumulenes causing an apparent swap of 1,2,3-triazole core for another heterocycle.

Contact de-electrification of electrostatically charged polymers.

The contact electrification of insulating organic polymers is still incompletely understood, in part because multiple fundamental mechanisms may contribute to the movement of charge. This study describes a mechanism previously unreported in the context of contact electrification: that is, "contact de-electrification", a process in which polymers charged to the same polarity discharge on contact. Both positively charged polymeric beads, e.g., polyamide 6/6 (Nylon) and polyoxymethylene (Delrin), and negatively charged polymeric beads, e.g., polytetrafluoroethylene (Teflon) and polyamide-imide (Torlon), discharge when the like-charged beads are brought into contact. The beads (both with charges of ∼±20 µC/m(2), or ∼100 charges/µm(2)) discharge on contact regardless of whether they are made of the same material, or of different materials. Discharge is rapid: discharge of flat slabs of like-charged Nylon and Teflon pieces is completed on a single contact (∼3 s). The charge lost from the polymers during contact de-electrification transfers onto molecules of gas in the atmosphere. When like-charged polymers are brought into contact, the increase in electric field at the point of contact exceeds the dielectric breakdown strength of the atmosphere and ionizes molecules of the gas; this ionization thus leads to discharge of the polymers. The detection (using a Faraday cup) of charges transferred to the cup by the ionized gas is compatible with the mechanism. Contact de-electrification occurs for different polymers and in atmospheres with different values of dielectric breakdown strength (helium, argon, oxygen, carbon dioxide, nitrogen, and sulfur hexafluoride): the mechanism thus appears to be general.

Proprioceptive coupling within motor neurons drives C. elegans forward locomotion.

Locomotion requires coordinated motor activity throughout an animal's body. In both vertebrates and invertebrates, chains of coupled central pattern generators (CPGs) are commonly evoked to explain local rhythmic behaviors. In C. elegans, we report that proprioception within the motor circuit is responsible for propagating and coordinating rhythmic undulatory waves from head to tail during forward movement. Proprioceptive coupling between adjacent body regions transduces rhythmic movement initiated near the head into bending waves driven along the body by a chain of reflexes. Using optogenetics and calcium imaging to manipulate and monitor motor circuit activity of moving C. elegans held in microfluidic devices, we found that the B-type cholinergic motor neurons transduce the proprioceptive signal. In C. elegans, a sensorimotor feedback loop operating within a specific type of motor neuron both drives and organizes body movement.

Camouflage and display for soft machines.

Synthetic systems cannot easily mimic the color-changing abilities of animals such as cephalopods. Soft machines--machines fabricated from soft polymers and flexible reinforcing sheets--are rapidly increasing in functionality. This manuscript describes simple microfluidic networks that can change the color, contrast, pattern, apparent shape, luminescence, and surface temperature of soft machines for camouflage and display. The color of these microfluidic networks can be changed simultaneously in the visible and infrared--a capability that organisms do not have. These strategies begin to imitate the functions, although not the anatomies, of color-changing animals.

Rhodium-catalyzed enantioselective cyclopropanation of olefins with N-sulfonyl 1,2,3-triazoles.

N-Sulfonyl 1,2,3-triazoles readily form rhodium(II) azavinyl carbenes, which react with olefins to produce cyclopropanes with excellent diastereo- and enantioselectivity and in high yield.

REGIOSELECTIVE SYNTHESIS OF EITHER 1H- OR 2H-1,2,3- TRIAZOLES VIA MICHAEL ADDITION TO α,ß-UNSATURATED KETONES.

The Michael reaction of NH-1,2,3-triazole (1) with α,ß-unsaturated ketones was studied. 1H-1,2,3-triazolyl-ketones were selectively generated when 1 was combined neat with a variety of enones. The use of aprotic solvents with catalytic base gave the corresponding 2H-regioisomers. Together, these two protocols provide direct access to either the N1- or N2-substituted 1,3-triazolyl ketone regioisomers.

Facile and efficient assembly of collagen-like triple helices on a TRIS scaffold.

The TRIS scaffold, Boc-beta-Ala-TRIS-(OH)3, was utilized to assemble triple helices composed of the Gly-Nleu-Pro sequence (Nleu denotes N-isobutylglycine). The scaffold assembly can be achieved efficiently through direct coupling between long peptide chains and the TRIS scaffold using DEPBT, a recently developed peptide coupling reagent. CD spectroscopy and thermal denaturation studies demonstrated that Boc-beta-Ala-TRIS-[(Gly-Nleu-Pro)n-OMe]3 exhibits triple helicity in H2O when n equals 5, 6, and 8, while the shorter analogs (where n=1 and 4) do not. TRIS-assembled structures possess several advantages over the KTA- and TREN-assembled structures previously reported from our laboratory (where KTA and TREN denotes cis-1,3,5-trimethyl cyclohexane-1,3,5-tricarboxylic acid and tris(2-aminoethyl)amine, respectively). The protecting groups on the scaffold and at the C-terminus of the TRIS-assembled peptides can be readily removed to synthesize collagen mimetic dendrimers and metal-complexing collagen-like peptides respectively, both of which can lead to further enhanced thermal stability.

Metal-assisted assembly and stabilization of collagen-like triple helices.

Single-chain and TRIS-assembled collagen mimetic peptide structures incorporating catechol groups were synthesized. When 1/3 equiv of Fe3+ was added to the single-chain compound in 50 mM CAPS buffer (pH 10), the 1:3 Fe3+-catechol complex that formed acted as an N-terminal scaffold to assemble the triple helix. When 1 equiv of Fe3+ was added to the TRIS-assembled compound in the buffer solution, the Fe3+-catechol complex acted as an extra C-terminal scaffold, which lead to a triple helix with both termini tethered. The formation of this C-terminal complex increased the Tm by a remarkable 22 degrees C!