Split fluorescent protein-mediated multimerization of cell wall binding domain for highly sensitive and selective bacterial detection.

Cell wall peptidoglycan binding domains (CBDs) of cell lytic enzymes, including bacteriocins, autolysins and bacteriophage endolysins, enable highly selective bacterial binding, and thus, have potential as biorecognition molecules for nondestructive bacterial detection. Here, a novel design for a self-complementing split fluorescent protein (FP) complex is proposed, where a multimeric FP chain fused with specific CBDs ((FP-CBD)n) is assembled inside the cell, to improve sensitivity by enhancing the signal generated upon Staphylococcus aureus or Bacillus anthracis binding. Flow cytometry shows enhanced fluorescence on the cell surface with increasing FP stoichiometry and surface plasmon resonance reveals nanomolar binding affinity to isolated peptidoglycan. The breadth of function of these complexes is demonstrated through the use of CBD modularity and the ability to attach enzymatic detection modalities. Horseradish peroxidase-coupled (FP-CBD)n complexes generate a catalytic amplification, with the degree of amplification increasing as a function of FP length, reaching a limit of detection (LOD) of 103 cells/droplet (approximately 0.1 ng S. aureus or B. anthracis) within 15 min on a polystyrene surface. These fusion proteins can be multiplexed for simultaneous detection. Multimeric split FP-CBD fusions enable use as a biorecognition molecule with enhanced signal for use in bacterial biosensing platforms.

Radiographic Evaluation of the Association between Foot Deformities and Ankle Medial Osteoarthritis.

Background: Foot deformities can cause abnormal biomechanics of the ankle joint and the development of osteoarthritis. It was hypothesized that foot deformities would be related to medial ankle osteoarthritis, and this study investigated this relationship using radiographic measurements. Methods: Seventy-six ankles of 76 patients (32 men and 44 women; mean age, 69.0 years) with medial ankle osteoarthritis were included. Eleven radiographic measurements evaluated ankle joint orientation (tibial plafond inclination [TPI], medial distal tibial angle [MDTA], and anterior distal tibial angle [ADTA]), ankle joint incongruency (tibiotalar tilt [TT]), foot deformities (lateral talo-first metatarsal angle [Lat talo-1MT], anteroposterior talo-first metatarsal angle [AP talo-1MT], and talonavicular coverage), talar body migration (medial talar center migration [MTCM] and anterior talar center migration [ATCM]), internal rotation (IR) of the talus, and mechanical tibiofemoral angle. All were statistically analyzed using Pearson's correlation coefficients and regression analyses. Results: Ankle joint orientation to the ground (TPI, p = 0.002), increased foot arch (Lat talo-1MT, p < 0.001), and IR of the talus (p = 0.001) were significantly associated with ankle joint incongruency (TT) in linear regression analysis. Ankle joint incongruency (TT, p = 0.003), medial talar body migration (MTCM, p = 0.042), and increased foot arch (Lat talo-1MT, p = 0.022) were significantly associated with IR of the talus in the binary logistic regression analysis. MTCM was significantly correlated with TPI (r = 0.251, p = 0.029), TT (r = 0.269, p = 0.019), MDTA (r = 0.359, p = 0.001), ATCM (r = -0.522, p < 0.001), and AP talo-1MT (r = 0.296, p = 0.015). ATCM was significantly correlated with TPI (r = -0.253, p = 0.027), ADTA (r = 0.349, p = 0.002), and Lat talo-1MT (r = -0.344, p = 0.002). Conclusions: Ankle joint orientation, foot deformities, and talar rotation were associated with ankle joint incongruency in medial ankle osteoarthritis when evaluated radiographically. These findings need to be considered during surgical treatment for medial ankle osteoarthritis. However, the biomechanical significance of these radiographic measurements requires further investigation.

Comparison of Measurable Residual Disease in Pediatric B-Lymphoblastic Leukemia Using Multiparametric Flow Cytometry and Next-Generation Sequencing.

Measurable residual disease (MRD) testing, a standard procedure in B-lymphoblastic leukemia (B-ALL) diagnostics, is assessed using multiparametric flow cytometry (MFC) and next-generation sequencing (NGS) analysis of immunoglobulin gene rearrangements. We evaluated the concordance between eight-color, two-tube MFC-MRD the LymphoTrack NGS-MRD assays using 139 follow-up samples from 54 pediatric patients with B-ALL. We also assessed the effect of hemodilution in MFC-MRD assays. The MRD-concordance rate was 79.9% (N=111), with 25 (18.0%) and 3 (2.2%) samples testing positive only by NGS-MRD (MFC-NGS+MRD) and MFC-MRD (MFC+NGS-MRD), respectively. We found a significant correlation in MRD values from total nucleated cells between the two methods (r=0.736 [0.647-0.806], P<0.001). The median MRD value of MFC-NGS+MRD samples was estimated to be 0.0012% (0.0001%-0.0263%) using the NGS-MRD assays. Notably, 14.3% of MFC-NGS+MRD samples showed NGS-MRD values below the limit of detection in the MFC-MRD assays. The percentages of hematogones detected in MFC-MRD assays significantly differed between the discordant and concordant cases (P<0.001). MFC and NGS-MRD assays showed relatively high concordance and correlation in MRD assessment, whereas the NGS-MRD assay detected MRD more frequently than the MFC-MRD assay in pediatric B-ALL. Evaluating the hematogone percentages can aid in assessing the impact of sample hemodilution.

Core-Shell Fe3O4@C Nanoparticles as Highly Effective T2 Magnetic Resonance Imaging Contrast Agents: In Vitro and In Vivo Studies.

Magnetite nanoparticles (Fe3O4 NPs) have been intensively investigated because of their potential biomedical applications due to their high saturation magnetization. In this study, core-shell Fe3O4@C NPs (core = Fe3O4 NPs and shell = amorphous carbons, davg = 35.1 nm) were synthesized in an aqueous solution. Carbon coating terminated with hydrophilic -OH and -COOH groups imparted excellent biocompatibility and hydrophilicity to the NPs, making them suitable for biomedical applications. The Fe3O4@C NPs exhibited ideal relaxometric properties for T2 magnetic resonance imaging (MRI) contrast agents (i.e., high transverse and negligible longitudinal water proton spin relaxivities), making them exclusively induce only T2 relaxation. Their T2 MRI performance as contrast agents was confirmed in vivo by measuring T2 MR images in mice before and after intravenous injection.

Ultrasmall cerium oxide nanoparticles as highly sensitive X-ray contrast agents and their antioxidant effect.

Owing to their theranostic properties, cerium oxide (CeO2) nanoparticles have attracted considerable attention for their key applications in nanomedicine. In this study, ultrasmall CeO2 nanoparticles (particle diameter = 1-3 nm) as X-ray contrast agents with an antioxidant effect were investigated for the first time. The nanoparticles were coated with hydrophilic and biocompatible poly(acrylic acid) (PAA) and poly(acrylic acid-co-maleic acid) (PAAMA) to ensure satisfactory colloidal stability in aqueous media and low cellular toxicity. The synthesized nanoparticles were characterized using high-resolution transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, thermogravimetric analysis, dynamic light scattering, cell viability assay, photoluminescence spectroscopy, and X-ray computed tomography (CT). Their potential as X-ray contrast agents was demonstrated by measuring phantom images and in vivo CT images in mice injected intravenously and intraperitoneally. The X-ray attenuation of these nanoparticles was greater than that of the commercial X-ray contrast agent Ultravist and those of larger CeO2 nanoparticles reported previously. In addition, they exhibited an antioxidant effect for the removal of hydrogen peroxide. The results confirmed that the PAA- and PAAMA-coated ultrasmall CeO2 nanoparticles demonstrate potential as highly sensitive radioprotective or theranostic X-ray contrast agents.

Biocidal products: Opportunities in risk assessment, management, and communication.

In the coronavirus disease 2019 era, biocidal products are increasingly used for controlling harmful organisms, including microorganisms. However, assuring safety against adverse health effects is a critical issue from a public health standpoint. This study aimed to provide an overview of key aspects of risk assessment, management, and communication that ensure the safety of biocidal active ingredients and products. The inherent characteristics of biocidal products make them effective against pests and pathogens; however, they also possess potential toxicities. Therefore, public awareness regarding both the beneficial and potential adverse effects of biocidal products needs to be increased. Biocidal active ingredients and products are regulated under specific laws: the Federal Insecticide, Fungicide, and Rodenticide Act for the United States; the European Union (EU) Biocidal Products Regulation for the EU; and the Consumer Chemical Products and Biocide Safety Management Act for the Republic of Korea. Risk management also needs to consider the evidence of enhanced sensitivity to toxicities in individuals with chronic diseases, given the increased prevalence of these conditions in the population. This is particularly important for post-marketing safety assessments of biocidal products. Risk communication conveys information, including potential risks and risk-reduction measures, aimed at managing or controlling health or environmental risks. Taken together, the collaborative effort of stakeholders in risk assessment, management, and communication strategies is critical to ensuring the safety of biocidal products sold in the market as these strategies are constantly evolving.

p-Phenylenediamine-Bridged Binder-Electrolyte-Unified Supramolecules for Versatile Lithium Secondary Batteries.

The binder is an essential component in determining the structural integrity and ionic conductivity of Li-ion battery electrodes. However, conventional binders are not sufficiently conductive and durable to be used with solid-state electrolytes. In this study, a novel system is proposed for a Li secondary battery that combines the electrolyte and binder into a unified structure, which is achieved by employing para-phenylenediamine (pPD) moiety to create supramolecular bridges between the parent binders. Due to a partial crosslinking effect and charge-transferring structure of pPD, the proposed strategy improves both the ionic conductivity and mechanical properties by a factor of 6.4 (achieving a conductivity of 3.73 × 10-4 S cm-1 for poly(ethylene oxide)-pPD) and 4.4 (reaching a mechanical strength of 151.4 kPa for poly(acrylic acid)-pPD) compared to those of conventional parent binders. As a result, when the supramolecules of pPD are used as a binder in a pouch cell with a lean electrolyte loading of 2 µL mAh-1 , a capacity retention of 80.2% is achieved even after 300 cycles. Furthermore, when it is utilized as a solid-state electrolyte, an average Coulombic efficiency of 99.7% and capacity retention of 98.7% are attained under operations at 50 °C without external pressure or a pre-aging process.

Ultrasensitive ImmunoMag-CRISPR Lateral Flow Assay for Point-of-Care Testing of Urinary Biomarkers.

Rapid, accurate, and noninvasive detection of biomarkers in saliva, urine, or nasal fluid is essential for the identification, early diagnosis, and monitoring of cancer, organ failure, transplant rejection, vascular diseases, autoimmune disorders, and infectious diseases. We report the development of an Immuno-CRISPR-based lateral flow assay (LFA) using antibody-DNA barcode complexes with magnetic enrichment of the target urinary biomarkers CXCL9 and CXCL10 for naked eye detection (ImmunoMag-CRISPR LFA). An intermediate approach involving a magnetic bead-based Immuno-CRISPR assay (ImmunoMag-CRISPR) resulted in a limit of detection (LOD) of 0.6 pg/mL for CXCL9. This value surpasses the detection limits achieved by previously reported assays. The highly sensitive detection method was then re-engineered into an LFA format with an LOD of 18 pg/mL for CXCL9, thereby enabling noninvasive early detection of acute kidney transplant rejection. The ImmunoMag-CRISPR LFA was tested on 42 clinical urine samples from kidney transplant recipients, and the assay could determine 11 positive and 31 negative urinary samples through a simple visual comparison of the test line and the control line of the LFA strip. The LFA system was then expanded to quantify the CXCL9 and CXCL10 levels in clinical urine samples from images. This approach has the potential to be extended to a wide range of point-of-care tests for highly sensitive biomarker detection.

Facet-Dependent Passivation for Efficient Perovskite Solar Cells.

Understanding the interplay between the surface structure and the passivation materials and their effects associated with surface structure modification is of fundamental importance; however, it remains an unsolved problem in the perovskite passivation field. Here, we report a surface passivation principle for efficient perovskite solar cells via a facet-dependent passivation phenomenon. The passivation process selectively occurs on facets, which is observed with various post-treatment materials with different functionality, and the atomic arrangements of the facets determine the alignments of the passivation layers. The profound understanding of facet-dependent passivation leads to the finding of 2-amidinopyridine hydroiodide as the material for a uniform and effective passivation on both (100) and (111) facets. Consequently, we achieved perovskite solar cells with an efficiency of 25.10% and enhanced stability. The concept of facet-dependent passivation can provide an important clue on unidentified passivation principles for perovskite materials and a novel means to enhance the performance and stability of perovskite-based devices.

Deep Learning-Based Diagnostic System for Velopharyngeal Insufficiency Based on Videofluoroscopy in Patients With Repaired Cleft Palates.

Velopharyngeal insufficiency (VPI), which is the incomplete closure of the velopharyngeal valve during speech, is a typical poor outcome that should be evaluated after cleft palate repair. The interpretation of VPI considering both imaging analysis and perceptual evaluation is essential for further management. The authors retrospectively reviewed patients with repaired cleft palates who underwent assessment for velopharyngeal function, including both videofluoroscopic imaging and perceptual speech evaluation. The final diagnosis of VPI was made by plastic surgeons based on both assessment modalities. Deep learning techniques were applied for the diagnosis of VPI and compared with the human experts' diagnostic results of videofluoroscopic imaging. In addition, the results of the deep learning techniques were compared with a speech pathologist's diagnosis of perceptual evaluation to assess consistency with clinical symptoms. A total of 714 cases from January 2010 to June 2019 were reviewed. Six deep learning algorithms (VGGNet, ResNet, Xception, ResNext, DenseNet, and SENet) were trained using the obtained dataset. The area under the receiver operating characteristic curve of the algorithms ranged between 0.8758 and 0.9468 in the hold-out method and between 0.7992 and 0.8574 in the 5-fold cross-validation. Our findings demonstrated the deep learning algorithms performed comparable to experienced plastic surgeons in the diagnosis of VPI based on videofluoroscopic velopharyngeal imaging.

Highly Sensitive Detection of Bacteria by Binder-Coupled Multifunctional Polymeric Dyes.

Infectious diseases caused by pathogens are a health burden, but traditional pathogen identification methods are complex and time-consuming. In this work, we have developed well-defined, multifunctional copolymers with rhodamine B dye synthesized by atom transfer radical polymerization (ATRP) using fully oxygen-tolerant photoredox/copper dual catalysis. ATRP enabled the efficient synthesis of copolymers with multiple fluorescent dyes from a biotin-functionalized initiator. Biotinylated dye copolymers were conjugated to antibody (Ab) or cell-wall binding domain (CBD), resulting in a highly fluorescent polymeric dye-binder complex. We showed that the unique combination of multifunctional polymeric dyes and strain-specific Ab or CBD exhibited both enhanced fluorescence and target selectivity for bioimaging of Staphylococcus aureus by flow cytometry and confocal microscopy. The ATRP-derived polymeric dyes have the potential as biosensors for the detection of target DNA, protein, or bacteria, as well as bioimaging.

Suramin binds and inhibits infection of SARS-CoV-2 through both spike protein-heparan sulfate and ACE2 receptor interactions.

SARS-CoV-2 receptor binding domains (RBDs) interact with both the ACE2 receptor and heparan sulfate on the surface of host cells to enhance SARS-CoV-2 infection. We show that suramin, a polysulfated synthetic drug, binds to the ACE2 receptor and heparan sulfate binding sites on the RBDs of wild-type, Delta, and Omicron variants. Specifically, heparan sulfate and suramin had enhanced preferential binding for Omicron RBD, and suramin is most potent against the live SARS-CoV-2 Omicron variant (B.1.1.529) when compared to wild type and Delta (B.1.617.2) variants in vitro. These results suggest that inhibition of live virus infection occurs through dual SARS-CoV-2 targets of S-protein binding and previously reported RNA-dependent RNA polymerase inhibition and offers the possibility for this and other polysulfated molecules to be used as potential therapeutic and prophylactic options against COVID-19.

Fabrication of phosphor in glass using waste glass for automotive lighting application.

With advancement of technology, requirements for light-emitting devices are increasing. Various types of packaging technologies have been suggested to improve the performance of light-emitting diode (LED). Among them, phosphor in glass (PiG) is attracting attention due to its manufactural facility and easily tunable characteristics. As PiG draws increasing attention, research on glass materials is also being actively conducted. However, studies about glass in the field of phosphor are mainly conducted on fabrication. Only a few studies about recycling have been reported. Thus, the objective of this study was to recycle waste glass discarded in other fields due to breakage and failure and use it to fabricate phosphor in glass. Cylindrical waste glass was pulverized into powder with an average size of 12 µm, mixed with a phosphor and sintered to be reborn as a phosphor in glass to broaden the recycling route for waste glass.

Analysis of clinical and genomic profiles of therapy-related myeloid neoplasm in Korea.

BACKGROUND: Therapy-related myeloid neoplasm (T-MN) rarely occurs among cancer survivors, and was characterized by poor prognosis. T-MN has germline predisposition in a considerable proportion. Here, clinical characteristics and germline/somatic variant profiles in T-MN patients were investigated, and the findings were compared with those of previous studies. METHODS: A review of medical records, cytogenetic study, targeted sequencing by next-generation sequencing, and survival analysis were performed on 53 patients with T-MN at a single institution in Korea. RESULTS: The patients were relatively younger compared to T-MN patients in other studies. Our T-MN patients showed a high frequency of complex karyotypes, -5/del(5q), and -7/del(7q), which was similar to the Japanese study group but higher than the Australian study group. The most common primary disease was non-Hodgkin lymphoma, followed by breast cancer. The detailed distributions of primary diseases were different across study groups. Seven patients (13.2%) harbored deleterious presumed/potential germline variants in cancer predisposition genes (CPG) such as BRIP1, CEBPA, DDX41, FANCM, NBN, NF1, and RUNX1. In the somatic variant profile, TP53 was the most frequently mutated gene, which was consistent with the previous studies about T-MN. However, the somatic variant frequency in our study group was lower than in other studies. Adverse factors for overall survival were male sex, older age, history of previous radiotherapy, previous longer cytotoxic therapy, and -5/del(5q). CONCLUSION: The findings of our study corroborate important information about T-MN patients. As well as a considerable predisposition to CPG, the clinical characteristics and somatic variant profile showed distinctive patterns. Germline variant testing should be recommended for T-MN patients. If the T-MN patients harbor pathogenic germline variants, the family members for stem cell donation should be screened for carrier status through germline variant testing to avoid donor-derived myeloid neoplasm. For the prediction of the prognosis in T-MN patients, sex, age, past treatment history, and cytogenetic findings can be considered.

Unveiling facet-dependent degradation and facet engineering for stable perovskite solar cells.

A myriad of studies and strategies have already been devoted to improving the stability of perovskite films; however, the role of the different perovskite crystal facets in stability is still unknown. Here, we reveal the underlying mechanisms of facet-dependent degradation of formamidinium lead iodide (FAPbI3) films. We show that the (100) facet is substantially more vulnerable to moisture-induced degradation than the (111) facet. With combined experimental and theoretical studies, the degradation mechanisms are revealed; a strong water adhesion following an elongated lead-iodine (Pb-I) bond distance is observed, which leads to a δ-phase transition on the (100) facet. Through engineering, a higher surface fraction of the (111) facet can be achieved, and the (111)-dominated crystalline FAPbI3 films show exceptional stability against moisture. Our findings elucidate unknown facet-dependent degradation mechanisms and kinetics.

Applicability Evaluation of Surface and Sub-Surface Defects for Railway Wheel Material Using Induced Alternating Current Potential Drops.

The majority of catastrophic wheelset failures are caused by surface opening fatigue cracks in either the wheel tread or wheel inner. Since failures in railway wheelsets can cause disasters, regular inspections to check for defects in wheels and axles are mandatory. Currently, ultrasonic testing, acoustic emissions, and the eddy current testing method are regularly used to check railway wheelsets in service. Yet, in many cases, despite surface and subsurface defects of the railroad wheels developing, the defects are not clearly detected by the conventional non-destructive inspection system. In the present study, a new technique was applied to the detection of surface and subsurface defects in railway wheel material. The results indicate that the technique can detect surface and subsurface defects of railway wheel specimens using the distribution of the alternating current (AC) electromagnetic field. In the wheelset cases presented, surface cracks with depths of 0.5 mm could be detected using this method.

Novel THPO variant in hereditary thrombocytopenia: A potential candidate variant for predisposition to myeloid neoplasm.

Hereditary thrombocytopenia is a heterogeneous group of congenital disorders with a wide range of symptoms depending on the severity of platelet dysfunction or thrombocytopenia. Because of its clinical phenotypes and the bone marrow morphology associated with this condition, hereditary thrombocytopenia can be misdiagnosed as primary immune thrombocytopenia and myelodysplastic syndrome. Therefore, genetic evidence is necessary for the accurate diagnosis of hereditary thrombocytopenia. Refractory cytopenia of childhood is a subgroup of myelodysplastic syndrome that was added to the World Health Organization classification in 2008. To investigate the germline and somatic variants associated with refractory cytopenia of childhood, we performed targeted multigene sequencing in three patients with refractory cytopenia of childhood. Of the three patients, one progressed from megakaryocytic hypoplasia with thrombocytopenia, and targeted multigene sequencing revealed THPO variants in this patient and his sister. We propose that the monoallelic deletion of THPO is a potential candidate for germline predisposition to myeloid malignancy.

Oriented Crystal Growth during Perovskite Surface Reconstruction.

Surface passivation has become a key strategy for an improvement in power conversion efficiency (PCE) of perovskite solar cells (PSCs) since PSCs experienced a steep increase in PCE and reached a comparably matured point. Recently, surface passivation using a mixed salt of fluorinated alkyl ammonium iodide and formamidinium bromide demonstrated a remarkable improvement in both performance and stability, which can be tuned by the length of the alkyl chain. Nevertheless, the role of the alkyl chain in manipulating surface-limited crystal growth was not fully understood, preventing a further progress in interface control. In this study, we found that the length of the fluorine-substituted alkyl chain governed the crystal formation dynamics by manipulating surface tensions of different crystal orientations. The overall enhancement of the (001) plane, being the most favored, commonly resulted from the surface reformation of the perovskite film regardless of the chain length, while the highly oriented (001) over (111) was monitored with a particular chain length. The enhanced crystal orientation during surface recrystallization was responsible for the low trap density and thus effectively suppressed charge recombination at the interface, resulting in a considerable increase in open-circuit voltage and fill factor.