RESUMEN
To study emissions of CO2 in the Baltimore, MD-Washington, D.C. (Balt-Wash) area, an aircraft campaign was conducted in February 2015, as part of the FLAGG-MD (Fluxes of Atmospheric Greenhouse-Gases in Maryland) project. During the campaign, elevated mole fractions of CO2 were observed downwind of the urban center and local power plants. Upwind flight data and HYSPLIT (Hybrid Single Particle Lagrangian Integrated Trajectory) model analyses help account for the impact of emissions outside the Balt-Wash area. The accuracy, precision, and sensitivity of CO2 emissions estimates based on the mass balance approach were assessed for both power plants and cities. Our estimates of CO2 emissions from two local power plants agree well with their CEMS (Continuous Emissions Monitoring Systems) records. For the 16 power plant plumes captured by the aircraft, the mean percentage difference of CO2 emissions was -0.3 %. For the Balt-Wash area as a whole, the 1σ CO2 emission rate uncertainty for any individual aircraft-based mass balance approach experiment was ±38 %. Treating the mass balance experiments, which were repeated seven times within nine days, as individual quantifications of the Balt-Wash CO2 emissions, the estimation uncertainty was ±16 % (standard error of the mean at 95% CL). Our aircraft-based estimate was compared to various bottom-up fossil fuel CO2 (FFCO2) emission inventories. Based on the FLAGG-MD aircraft observations, we estimate 1.9±0.3 MtC of FFCO2 from the Balt-Wash area during the month of February 2015. The mean estimate of FFCO2 from the four bottom-up models was 2.2±0.3 MtC.
RESUMEN
Nearly 1.0 × 10(8) tonnes of phosphogypsum were accumulated during last 50 years on a 1,200 ha disposal site near Huelva town (SW of Spain). Previous measurements of exhalation rates offered very variable values, in such a way that a worst case scenario could not be established. Here, new experimental data coupled to numerical simulations show that increasing the moisture contents or the temperature reduces the exhalation rate whilst increasing the radon potential or porosity has the contrary effect. Once the relative effects are compared, it can be drawn that the most relevant parameters controlling the exhalation rate are radon potential (product of emanation factor by (226)Ra concentration) and moisture saturation of PG. From wastes management point of view, it can be concluded that piling up the waste increasing the height instead of the surface allows the reduction of the exhalation rate. Furthermore, a proposed cover here is expected to allow exhalation rates reductions up to 95%. We established that the worst case scenario corresponds to a situation of extremely dry winter. Under these conditions, the radon exhalation rate (0.508 Bqm(-2)s(-1)) would be below though close to the upper limit established by U.S.E.P.A. for inactive phopsphogypsum piles (0.722 Bqm(-2)s(-1)).
Asunto(s)
Contaminantes Radiactivos del Aire/análisis , Sulfato de Calcio/química , Fósforo/química , Radón/análisis , Radiometría , EspañaRESUMEN
In order to fill a gap in the open literature, occupational exposures and activity concentrations have been assessed in two NORM industrial plants, located in the south-west of Spain, devoted to the production of mono-ammonium phosphate (MAP) and di-ammonium phosphate (DAP) fertilisers. The annual effective doses received by the workers from these plants are clearly below 1 mSv yr(-1) and the contribution due to external radiation is similar to that due to inhalation. The contribution to the maximum effective doses due to inhalation of particulate matter has been estimated to be about 0.12 mSv yr(-1), while the (222)Rn concentrations inside the plants are of no concern. Consequently, no additional actions or radiological protection measures need to be taken to decrease the natural radiation received by the workers in these facilities.
Asunto(s)
Contaminantes Radiactivos del Aire/análisis , Fertilizantes/análisis , Industrias , Exposición Profesional/análisis , Fosfatos/química , Monitoreo de Radiación/métodos , Radón/análisis , Simulación por Computador , Humanos , Modelos Biológicos , EspañaRESUMEN
Some radon related parameters have been determined through two different techniques (passive and active) in soil and phosphogypsum samples. Emanation factors determined through these techniques show a good agreement for soil samples while for phosphogympsum samples appear large discrepancies. In this paper, these discrepancies are analyzed and explained if non-controlled radon leakages in the passive technique are taken into account.
Asunto(s)
Monitoreo de Radiación/métodos , Radón/análisis , Sulfato de Calcio/análisis , Fósforo/análisis , Reproducibilidad de los Resultados , Suelo/análisisRESUMEN
The radiological risk associated with the use of solid materials has been traditionally established according to their radon exhalation rates, the accumulation chamber technique being the most widely used for the determination of this quantity. However, this coupled methodology has two important drawbacks: the calculated exhalation rate value depends strongly on the experimental setup used; hence widely varying values can be calculated for the same material. Furthermore, this technique usually requires long monitoring times (between 1 and 4 weeks). In this paper, we present a fast and reproducible method for the determination of radon potential (as an alternative to the exhalation rate) based on the application of the accumulation chamber technique. Radon potential is proportional to the emanation coefficient, and can be calculated within measuring times of less than 24h. The theoretical basis is developed and the experimental setup is discussed in detail in this paper. The procedures for the determination of different experimental parameters (leakage constant, slope correction) are shown as essential steps for the later determination of the radon potential. In addition, the robustness of the developed methodology is demonstrated, and the reproducibility tests carried out with the general system performance are shown. Finally, the radon potential for different materials is determined, allowing its prompt categorization according to its associated radiological risk.