Improving juror assessments of forensic testimony and its effects on decision-making and evidence evaluation.

OBJECTIVE: We explored whether an educational forensic science informational (FSI) video either alone or with specialized jury instructions would assist mock jurors in evaluating forensic expert testimony. HYPOTHESES: We predicted that the FSI video would help participants distinguish between low-quality and high-quality testimony, evidenced by lower ratings of the testimony and the expert when the testimonial quality was low compared with when it was high. METHOD: Jury-eligible adults (N = 641; Mage = 38.18 years; 77.4% White; 8.1% Latino/a or Hispanic; 50.1% male) watched a mock trial and were randomly assigned to a no-forensic-evidence control condition or to a test condition (i.e., participants either watched the FSI video before the trial or did not and either received specialized posttrial instructions or did not). In the test conditions, a forensic expert provided low-quality or high-quality testimony about a latent impression, and participants rated the expert, their testimony, and the forensic evidence. All participants rendered verdicts. RESULTS: The presence of the FSI video interacted with testimonial quality on ratings of the expert and forensic testimony: In the video-present condition, participants rated the expert in the low-quality testimony condition lower than did participants in the high-quality testimony condition (between-condition differences for credibility: d = -0.52, 95% confidence interval [CI] [-0.78, -0.27]; trustworthiness: d = -0.67, 95% CI [-0.92, -0.42]; knowledgeability: d = -0.54, 95% CI [-0.80, -0.29]). The pattern was the same for the expert's testimony (between-condition differences for convincingness: d = -0.41, 95% CI [-0.66, -0.16]; validity: d = -0.60, 95% CI [-0.86, -0.35]; presentation quality: d = -0.51, 95% CI [-0.76, -0.25]). Participants' ratings in the video-absent condition did not differ on the basis of testimonial quality (ds = -0.07-0.11). The ratings of the print evidence and verdicts were unaffected. Specialized jury instructions had no effect. CONCLUSION: The FSI video may be a practical in-court intervention to increase jurors' sensitivity to low-quality forensic testimony without creating skepticism. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

The classification of inkjet inks using AccuTOF™ DART™ (Direct Analysis in Real Time) mass spectrometry--a preliminary study.

A novel approach for the analysis of inkjet inks is being reported. A time-of-flight mass spectrometer, coupled with a Direct Analysis in Real Time (DART™) ion source (AccuTOF™ DART™), was used to determine if inkjet inks from various manufacturers and models of printers could be reliably differentiated, characterized, and identified. A total of 217 ink standards were analyzed. As inkjet printing often involves the use of multiple colors (e.g., cyan, magenta, yellow, and black) to form an image or text, two different approaches to creating a library of standards and sampling methods were evaluated for implementation in a standard operating procedure. This research will show that a microscopic examination of the region of interest is requisite to identify what colors were utilized during the printing process, prior to comparing with known standards. Finally, blind testing was administered with 10 unknown samples to assess the validity and accuracy of the methodology.

The use of filtered light for the evaluation of writing inks analyzed using thin layer chromatography.

Thin layer chromatography (TLC) is a scientific methodology that can be used to compare and characterize ink formulations. Occasionally, when evaluating chromatographic profiles on a TLC plate with ambient light, different ink formulations, or the same inks from different batches, may appear indistinguishable. The use of filtered light can be very effective to illuminate characteristics that are not readily apparent with ambient light. There are a diverse number of components commonly found in writing inks, and it may be that some of them respond to particular wavelengths of energy that are not visible to the unaided eye (i.e., colorless). There has been very little information published that addresses the use of filtered light for evaluating TLC plates. Twenty-nine ballpoint writing ink samples were selected for TLC analysis. Further evaluation using an alternate light source, coupled with the appropriate filter, proved to be an effective means for definitive discrimination in some cases.

The examination of commercial printing defects to assess common origin, batch variation, and error rate.

The examination of printing defects, or imperfections, found on printed or copied documents has been recognized as a generally accepted approach for linking questioned documents to a common source. This research paper will highlight the results from two mutually exclusive studies. The first involved the examination and characterization of printing defects found in a controlled production run of 500,000 envelopes bearing text and images. It was concluded that printing defects are random occurrences and that morphological differences can be used to identify variations within the same production batch. The second part incorporated a blind study to assess the error rate of associating randomly selected envelopes from different retail locations to a known source. The examination was based on the comparison of printing defects in the security patterns found in some envelopes. The results demonstrated that it is possible to associate envelopes to a common origin with a 0% error rate.

An evaluation of matching unknown writing inks with the United States International Ink Library.

Utilizing a database of standards for forensic casework is a valuable resource. Undoubtedly, as more standards (and corresponding information about the specimens) are collected, there is a greater certainty of identification when a questioned and a known item cannot be distinguished after a series of analyses. The United States Secret Service and the Internal Revenue Service National Forensic Laboratory jointly maintain the largest known forensic collection of writing inks in the world, which is comprised of over 8500 ink standards collected worldwide, dating back to the 1920s. This study was conducted to evaluate the reliability of matching arbitrarily purchased pens with known inks from a database. One hundred pens were randomly obtained from a variety of sources and their respective ink compositions were compared with standards. Eighty-five of the inks were determined to be suitable for comparison utilizing optical examinations and thin-layer chromatography. Three of the inks did not match any of the specimens on record; one of these inks was similar to an ink from an identical brand of pen that was in the database, but had a modified formulation.

Analytical methods used for the discrimination of substances suspected to be bar soap: a preliminary study.

The submission to forensic laboratories of unknown specimens suspected of being biological or chemical warfare agents has increased tremendously with the threat of terrorism. Oftentimes, a threatening correspondence that contains hoax materials is intended to make the recipient(s) believe they have been exposed to a toxin. In some cases, the perpetrator can use standard household products, such as detergents and soaps. Once these materials are received, they become forensic evidence and may be analyzed for identification and/or comparison with known seized material from a suspect(s). Two separate studies were conducted using different analytical protocols for bar soaps. In the first set, the forensic laboratory at the United States Secret Service conducted tests on 68 bars of soap using solid-phase microextraction and gas chromatography coupled with mass spectrometry. The 68 different soaps displayed unique total ion chromatogram profiles. Energy-dispersive X-ray analysis in conjunction with scanning electron microscopy was also used to characterize 46 of the 68 soaps as a preliminary study. In a second set of studies, as part of a homicide investigation, the laboratory at the California Department of Justice, Riverside, conducted examinations on 13 bars of soap by utilizing Fourier transform-infrared spectroscopy. The case study demonstrated that it is possible to distinguish some bar soaps using infrared analysis. Furthermore, the bar soaps could be distinguished from typical laundry detergents using this technique.

The use of an electrostatic detection device to identify individual and class characteristics on documents produced by printers and copiers--a preliminary study.

The market is inundated with inkjet printers, laser printers, and photocopiers, which are often used in criminal activities. Many of these office machines are built by various manufacturers, hence they are constructed with different hardware designs (e.g. "rolling" and "grabbing" mechanisms) that have changed over the years due to technological advances. Examinations of printed documents that involve the chemical analysis of ink colorants and the identification of physical machine defects such as trash marks are essential for the forensic examiner, but new techniques are needed to more closely identify a machine model or group of models. An electrostatic detection device (EDD) provide forensic examiners with a nondestructive method to examine indentations on a document. In this work, an EDD is used to detect latent physical markings left on documents by printers and photocopiers. Seventeen inkjet printers, 12 laser printers, and 3 photocopy machines were used to produce test documents. Physical markings were detectable in the large majority of the documents and were reproducible 100% of the time.

Differentiation of black gel inks using optical and chemical techniques.

Gel ink pens have become a common writing instrument in the United States. Questioned document examiners often attempt to optically differentiate gel inks from each other and from other non-ballpoint ink writings (e.g., those from roller-ball pens). Since early formulations were primarily pigment-based, they do not elute when analyzed by thin-layer chromatography. However, recent gel ink formulations (i.e., within the past five years) include dye-based inks that can be easily separated. This study differentiates black gel inks using optical and chemical techniques. The techniques include: microscopy, visible and near infrared reflectance, near infrared luminescence, thin-layer chromatography (TLC), spot tests, and gas chromatography/mass spectrometry (GC/MS). As a result of this study a flow chart has been developed allowing for a systematic determination of a questioned ink. In addition, an analysis of volatile compounds found in gel inks revealed that there are some unique ingredients that may be found in gel inks that are not typically found in other non-ballpoint inks.

The identification of 2-phenoxyethanol in ballpoint inks using gas chromatography/mass spectrometry--relevance to ink dating.

Developing and implementing a generally accepted procedure for the dating of ink found on documents using dynamic approaches has been a very formidable undertaking by forensic document examiners. 2-Phenoxyethanol (PE), a common volatile organic compound found in ballpoint inks, has been recognized for over a decade as a solvent that evaporates as ink ages. More recently, investigations have focused on the solvent loss ratio of PE prior to and after heating. To determine how often PE occurs in ink formulations, the authors analyzed 633 ballpoint inks utilizing a gas chromatograph/mass spectrometer. 2-Phenoxyethanol was identified in 85% (237/279) and 83% (293/354) of black and blue inks, respectively.

The forensic analysis of thermal transfer printing.

Thermal transfer printing refers to printing processes that utilize heat to produce an image by either physical or chemical means or by a combination of both. As the technology has improved and the supplies have become less expensive, the use of thermal printing in the personal and business markets has increased significantly. Specifically, dye diffusion thermal transfer and thermal mass transfer have become predominant in the production of counterfeit credit cards, drivers' licenses, and other types of documents produced on plastic media. Chemical analysis by means of thin layer chromatography (TLC) has proven to be useful in characterizing various types of inks (e.g., writing and inkjet inks). In this study, the authors examined 81 different samples that included a total of 54 printer samples (43 photographic prints on paper and eleven plastic card samples) and 27 printer ribbons. A new TLC method was developed and tested utilizing a solvent system (80% n-hexane, 3% methyl ethyl ketone, and 17% ethyl acetate) that is capable of producing excellent resolution.

The effects of latent print processing on questioned documents produced by office machine systems utilizing inkjet technology and toner.

Counterfeiting of currency and identity documents, death threats, illegitimate business transactions, and terrorist-related activities are some examples of the types of crimes that often involve documents produced from printers and copiers. Although standard protocol typically requires a questioned document (QD) examination prior to latent print (LP) processing, occasionally, items of evidence may be submitted for a QD examination following the application of a series chemicals utilized in the development of latent fingerprints. In such cases, the forensic examiner must take into account any previous treatments prior to initiating an examination on documents produced with a printer or copier. This study was devised to examine the effects of a latent print development technique [ninhydrin, physical developer, and a bleach enhancer] on the physical and chemical examination of documents produced from copiers and printers.