Staged surgical treatment of a primary duodenocaval fistula in a patient with metastatic nonseminomatous germ cell tumor.

Endovascular exclusion of aortoenteric fistula has been described as a bridge to definitive open repair surgery. However, little is known about transposing this technique to treat duodenocaval fistula. We report a case of a 20-year-old man who presented with a duodenocaval fistula arising from a metastatic nonseminomatous germ cell tumor. A staged technique using an initial endovenous exclusion of the fistula permitted stabilization of the patient and completion of his chemotherapy regimen. Subsequently, the stent graft was explanted with concomitant autogenous caval reconstruction, allowing the patient to be cancer free at 1-year follow-up.

Microstructured human fibroblast-derived extracellular matrix scaffold for vascular media fabrication.

In the clinical and pharmacological fields, there is a need for the production of tissue-engineered small-diameter blood vessels. We have demonstrated previously that the extracellular matrix (ECM) produced by fibroblasts can be used as a scaffold to support three-dimensional (3D) growth of another cell type. Thus, a resistant tissue-engineered vascular media can be produced when such scaffolds are used to culture smooth muscle cells (SMCs). The present study was designed to develop an anisotropic fibroblastic ECM sheet that could replicate the physiological architecture of blood vessels after being assembled into a small diameter vascular conduit. Anisotropic ECM scaffolds were produced using human dermal fibroblasts, grown on a microfabricated substrate with a specific topography, which led to cell alignment and unidirectional ECM assembly. Following their devitalization, the scaffolds were seeded with SMCs. These cells elongated and migrated in a single direction, following a specific angle relative to the direction of the aligned fibroblastic ECM. Their resultant ECM stained for collagen I and III and elastin, and the cells expressed SMC differentiation markers. Seven days after SMCs seeding, the sheets were rolled around a mandrel to form a tissue-engineered vascular media. The resulting anisotropic ECM and cell alignment induced an increase in the mechanical strength and vascular reactivity in the circumferential direction as compared to unaligned constructs. Copyright © 2016 John Wiley & Sons, Ltd.

Prospective study on the treatment of lower-extremity chronic venous and mixed ulcers using tissue-engineered skin substitute made by the self-assembly approach.

BACKGROUND: Despite present optimal standard treatment of lower-extremity ulceration, a high incidence of recurrence and treatment failure is observed. The objective of this project was to evaluate the effect of a self-assembled skin substitute (SASS) made by tissue engineering as a temporary cutaneous dressing in the treatment of hard-to-heal chronic ulcers. PATIENTS AND METHODS: The prospective uncontrolled case study includes patients suffering from venous or mixed ulcers lasting more than 6 months and unresponsive to compression therapy, with an Ankle Brachial Index greater than 0.5. Compression therapy was combined with the weekly application of SASS, produced from the patient's own skin cells, until healing. A weekly follow-up recorded wound size, skin aspect, pain, drainage, and percentage of wound healing. Photographs were also taken to assess ulcer evolution. RESULTS: Fourteen ulcers present on 5 patients were treated. A mean of 6.7 SASS depositions by ulcer was required for healing. Two ulcers developed a minor wound infection, which was treated with oral antibiotics; another 2 ulcers recurred, and 1 healed with a second course of treatment, whereas 1 ulcer had a small recurrence treated with local wound care. CONCLUSION: The authors' study suggests that the SASS used as a biological dressing is a promising treatment for hard-to-heal chronic venous and mixed ulcers that are unresponsive to compression therapy.

Human fibroblast-derived ECM as a scaffold for vascular tissue engineering.

The self-assembly approach is based on the capability of mesenchymal cells to secrete and organize their own extracellular matrix (ECM). This tissue engineering method allows for the fabrication of autologous living tissues, such as tissue-engineered blood vessels (TEBV) and skin. However, the secretion of ECM by smooth muscle cells (SMCs), required to produce the vascular media, may represent a long process in vitro. The aim of this work was to reduce the time required to produce a tissue-engineered vascular media (TEVM) and extend the production of TEVM with SMCs from all patients without compromising its mechanical and functional properties. Therefore, we developed a decellularized matrix scaffold (dMS) produced from dermal fibroblasts (DF) or saphenous vein fibroblasts (SVF), in which SMCs were seeded to produce a TEVM. Mechanical and contractile properties of these TEVM (referred to as nTEVM) were compared to standard self-assembled TEVM (sTEVM). This approach reduced the production time from 6 to 4 weeks. Moreover, nTEVM were more resistant to tensile load than sTEVM and their vascular reactivity was also improved. This new fabrication technique allows for the production of a vascular media using SMCs isolated from any patient, regardless of their capacity to synthesize ECM. Moreover, these scaffolds can be stored to be available when needed, in order to accelerate the production of the vascular substitute using autologous vascular cells.

Tissue-engineered vascular adventitia with vasa vasorum improves graft integration and vascularization through inosculation.

Tissue-engineered blood vessel is one of the most promising living substitutes for coronary and peripheral artery bypass graft surgery. However, one of the main limitations in tissue engineering is vascularization of the construct before implantation. Such a vascularization could play an important role in graft perfusion and host integration of tissue-engineered vascular adventitia. Using our self-assembly approach, we developed a method to vascularize tissue-engineered blood vessel constructs by coculturing endothelial cells in a fibroblast-laden tissue sheet. After subcutaneous implantation, enhancement of graft integration within the surrounding environment was noted after 48 h and an important improvement in blood circulation of the grafted tissue at 1 week postimplantation. The distinctive branching structure of end arteries characterizing the in vivo adventitial vasa vasorum has also been observed in long-term postimplantation follow-up. After a 90-day implantation period, hybrid vessels containing human and mouse endothelial cells were still perfused. Characterization of the mechanical properties of both control and vascularized adventitia demonstrated that the ultimate tensile strength, modulus, and failure strain were in the same order of magnitude of a pig coronary artery. The addition of a vasa vasorum to the tissue-engineered adventitia did not influence the burst pressure of these constructs. Hence, the present results indicate a promising answer to the many challenges associated with the in vitro vascularization and in vivo integration of many different tissue-engineered substitutes.

Polyphenols modulate calcium-independent mechanisms in human arterial tissue-engineered vascular media.

BACKGROUND: In the present study, an arterial tissue-engineered vascular media (TEVM) was produced from cultured human smooth muscle cells of the umbilical artery and we took advantage of this model to evaluate the regulation of contraction and the signalling pathways of polyphenols in arteries. METHODS: Cultured human smooth muscle cells of the umbilical artery were used to produce arterial TEVMs. Contraction experiments were performed to determine intracellular targets involved in the modulation of contraction by polyphenols extract from red wine, Provinols (SEPPIC Groupe Air Liquide, Paris, France). RESULTS: Smooth muscle cells in arterial TEVM displayed a differentiated phenotype as demonstrated by the expression of alpha-smooth muscle actin, a vascular smooth muscle-specific marker, and tissue contraction in response to vasoconstrictor and vasodilator agents. Contractions caused by histamine were associated with an increase in [Ca(2+)](i) and a Ca(2+)-independent signalling pathway. The latter pathway involved mechanisms sensitive to protein kinase C, myosin light chain kinase, and Rho-associated protein kinase inhibitors. The regulation of contraction induced by Provinols shows that treatment of arterial TEVM with this compound significantly decreased histamine-induced contraction. This effect was associated with the inhibition of the Rho-associated protein kinase pathway and the decrease in alpha-smooth muscle actin expression. CONCLUSION: The use of arterial TEVM, brings new insights into the mechanisms by which polyphenols regulate vascular contraction in the human artery.

Adventitia contribution in vascular tone: insights from adventitia-derived cells in a tissue-engineered human blood vessel.

Whether the adventitia component of blood vessels directly participates in the regulation of vascular tone remains to be demonstrated. We have recently developed a human tissue-engineered blood vessel comprising the three tunicae of a native blood vessel using the self-assembly approach. To investigate the role of the adventitia in the modulation of vascular tone, this tissue-engineering method was used to produce three vascular constructs from cells explanted and proliferated from donor vessel tunicae 1) an adventitia + a media, or only 2) an adventitia, or 3) a media. The vasoconstriction responses of these 3 constructs to endothelin, the most potent vasopressor known up-to-date, as well as to nonselective and selective agonists and antagonists, were compared. The adventitia contracted to endothelin-1, -2, whereas the media and the media+adventitia contracted to all three endothelins. Endothelin-induced contraction of the adventitia was dependent on ET(A) receptors, whereas that of the media and the adventitia+media was ET(A) and ET(B) receptor-dependent. RT-PCR studies corroborated these results. SNP induced a dose-dependent relaxation of the three tissue constructs. We also demonstrated that the endothelin-converting enzyme, responsible for the formation of the active endothelin peptides, was present and functional in the adventitia. In conclusion, this is the first direct demonstration that the adventitia has the capacity to contract and relax in response to vasoactive factors. The present study suggests that the adventitia of a blood vessel could play a greater role than expected in the modulation of blood vessel tone.

Mechanical loading modulates the differentiation state of vascular smooth muscle cells.

The cause underlying the onset of stenosis after vascular reconstruction is not well understood. In the present study, we evaluated the effect of mechanical unloading on the differentiation state of human vascular smooth muscle cells (hVSMCs) using a tissue-engineered vascular media (TEVM). hVSMCs cultured in a mechanically loaded three-dimensional environment, known as a living tissue sheet, had a higher differentiated state than cells grown on plastic. When the living tissue sheet was detached from its support, the release of the residual stress resulted in a mechanical unloading and cells within the extracellular matrix (ECM) dedifferentiated as shown by downregulation of differentiation markers. The relaxed living tissue sheet can be rolled onto a tubular mandrel to form a TEVM. The rolling procedure resulted in the reintroduction of a mechanical load leading to a cohesive compacted tissue. During this period, cells gradually redifferentiated and aligned circumferentially to the tubular support. Our results suggest that differentiation of hVSMCs can be driven by mechanical loading and may occur simultaneously in the absence of other cell types. The extrapolation of our results to the clinical context suggests the hypothesis that hVSMCs may adopt a proliferative phenotype resulting from the mechanical unloading of explanted blood vessels during vascular reconstruction. Therefore, we propose that this mechanical unloading may play an important role in the onset of vascular graft stenosis.

Isolation and culture of the three vascular cell types from a small vein biopsy sample.

The availability of small-diameter blood vessels remains a significant problem in vascular reconstruction. In small-diameter blood vessels, synthetic grafts resulted in low patency; the addition of endothelial cells (EC) has clearly improved this parameter, thereby proving the important contribution of the cellular component to the functionality of any construct. Because the optimal source of cells should be autologous, the adaptation of existing methods for the isolation of all the vascular cell types present in a single and small biopsy sample, thus reducing patient's morbidity, is a first step toward future clinical applications of any newly developed tissue-engineered blood vessel. This study describes such a cell-harvesting procedure from vein biopsy samples of canine and human origin. For this purpose, we combined preexisting mechanical methods for the isolation of the three vascular cell types: EC by scraping of the endothelium using a scalpel blade, vascular smooth muscle cells (VSMC), and perivascular fibroblasts according to the explant method. Once in culture, cells rapidly grew with the high level of enrichment. The morphological, phenotypical, and functional expected criteria were maintained: EC formed cobblestone colonies, expressed the von Willebrand factor, and incorporated acetylated low-density lipoprotein (LDL); VSMC were elongated and contracted when challenged by vasoactive agents; perivascular fibroblasts formed a mechanically resistant structure. Thus, we demonstrated that an appropriate combination of preexisting harvesting methods is suitable to isolate simultaneously the vascular cell types present in a single biopsy sample. Their functional characteristics indicated that they were suitable for the cellularization of synthetic prosthesis or the reconstruction of functional multicellular autologous organs by tissue engineering.