Emerging trends in the development of flexible optrode arrays for electrophysiology.

Optical-electrode (optrode) arrays use light to modulate excitable biological tissues and/or transduce bioelectrical signals into the optical domain. Light offers several advantages over electrical wiring, including the ability to encode multiple data channels within a single beam. This approach is at the forefront of innovation aimed at increasing spatial resolution and channel count in multichannel electrophysiology systems. This review presents an overview of devices and material systems that utilize light for electrophysiology recording and stimulation. The work focuses on the current and emerging methods and their applications, and provides a detailed discussion of the design and fabrication of flexible arrayed devices. Optrode arrays feature components non-existent in conventional multi-electrode arrays, such as waveguides, optical circuitry, light-emitting diodes, and optoelectronic and light-sensitive functional materials, packaged in planar, penetrating, or endoscopic forms. Often these are combined with dielectric and conductive structures and, less frequently, with multi-functional sensors. While creating flexible optrode arrays is feasible and necessary to minimize tissue-device mechanical mismatch, key factors must be considered for regulatory approval and clinical use. These include the biocompatibility of optical and photonic components. Additionally, material selection should match the operating wavelength of the specific electrophysiology application, minimizing light scattering and optical losses under physiologically induced stresses and strains. Flexible and soft variants of traditionally rigid photonic circuitry for passive optical multiplexing should be developed to advance the field. We evaluate fabrication techniques against these requirements. We foresee a future whereby established telecommunications techniques are engineered into flexible optrode arrays to enable unprecedented large-scale high-resolution electrophysiology systems.

Liquid crystal electro-optical transducers for electrophysiology sensing applications.

Objective.Biomedical instrumentation and clinical systems for electrophysiology rely on electrodes and wires for sensing and transmission of bioelectric signals. However, this electronic approach constrains bandwidth, signal conditioning circuit designs, and the number of channels in invasive or miniature devices. This paper demonstrates an alternative approach using light to sense and transmit the electrophysiological signals.Approach.We develop a sensing, passive, fluorophore-free optrode based on the birefringence property of liquid crystals (LCs) operating at the microscale.Main results.We show that these optrodes can have the appropriate linearity (µ± s.d.: 99.4 ± 0.5%,n = 11 devices), relative responsivity (µ± s.d.: 57 ± 12%V-1,n = 5 devices), and bandwidth (µ± s.d.: 11.1 ± 0.7 kHz,n = 7 devices) for transducing electrophysiology signals into the optical domain. We report capture of rabbit cardiac sinoatrial electrograms and stimulus-evoked compound action potentials from the rabbit sciatic nerve. We also demonstrate miniaturisation potential by fabricating multi-optrode arrays, by developing a process that automatically matches each transducer element area with that of its corresponding biological interface.Significance.Our method of employing LCs to convert bioelectric signals into the optical domain will pave the way for the deployment of high-bandwidth optical telecommunications techniques in ultra-miniature clinical diagnostic and research laboratory neural and cardiac interfaces.

Impedance Properties of Multi-Optrode Biopotential Sensing Arrays.

Recording and monitoring electrically-excitable cells is critical to understanding the complex cellular networking within organs as well as the processes underlying many electro-physiological pathologies. Biopotential recording using an optical-electrode (optrode) is a novel approach which has potential to significantly improve interface-instrumentation impedance mismatching as recording contact-sizes become smaller and smaller. Optrodes incorporate a conductive interface that can sense extracellular potential and an underlying layer of liquid crystals that passively transduces electrical signals into measurable optical signals. This study investigates the impedance properties of this optical technology by varying the diameter of recording sites and observing the corresponding changes in the impedance values. The results show that the liquid crystals in this optrode platform exhibit input impedance values (1 MΩ - 100 GΩ) that are three orders of magnitude higher than the corresponding interface impedance, which is appropriate for voltage sensing. The automatic scaling of the input impedance enabled within the optrode system maintains a relatively constant ratio between input and total system impedance of about one for sensing areas with diameters ranging from 40 µm to 1 mm, at which the calculated signal loss is predicted to be <1%. This feature preserves the interface-transducer impedance ratio, regardless of the size of the recording site, allowing development of passive optrode arrays capable of very high spatial-resolution recordings.

Photodiode working in zero-mode: detecting light power change with DC rejection and AC amplification.

We propose a new mode of operation when using a photodiode to extract a variable optical signal from a constant (ambient) background. The basic idea of this 'zero-mode' of operation is to force the photodiode to operate at either zero current or zero voltage. We present possible implementations of this novel approach and provide the corresponding equivalent circuits while also demonstrating experimentally its performance. The gain and bandwidth of the zero-mode photodetector are measured and simulated, and they show highly agreement. The gain compression effect because of the nonlinearity of the forward bias region is also explored. Comparing to the conventional photoconductive photodetector, the zero-mode photodetector is able to obtain higher AC gain and lower noise. With the same component used in the circuit, the measured input referred root mean square noise of zero-mode photodetector is 4.4mV whereas that of the photoconductive mode photodetector is 96.9mV respectively, showing the feasibility of the zero-mode of operation for measuring the small variable light signal under a high power constant background light.

Numerical modelling and optimization of actively Q-switched waveguide lasers based on liquid crystal transducers.

We have recently experimentally demonstrated that a novel liquid crystal-based photonic transducer for sensing systems could be utilized as an active Q-switch in a miniaturised and integrated waveguide laser system. In this paper, we now present a comprehensive numerical modelling study of this novel laser architecture by deriving a set of equations that accurately describe the temporal optical response of the liquid crystal cell as a function of applied voltage and by combining this theoretical model with laser-rate equations. We validate the accuracy of this model by comparing the results with previously obtained data and find them in excellent agreement. This enables us to predict that under realistic conditions and moderate pump power levels of 500 mW, the laser system should be capable of generating peak power levels in excess of 1.1 kW with pulse widths of about 20 ns, corresponding to pulse energies > 20 µJ. We believe that such a low-cost and ultra-compact laser source could find applications ranging from trace gas sensing and LIDAR to material processing.

A biopotential optrode array: operation principles and simulations.

We propose an optical electrode 'optrode' sensor array for biopotential measurements. The transduction mechanism is based on deformed helix ferroelectric liquid crystals which realign, altering the optrode's light reflectance properties, relative to applied potential fields of biological cells and tissue. A computational model of extracellular potential recording by the optrode including the electro-optical transduction mechanism is presented, using a combination of time-domain and frequency-domain finite element analysis. Simulations indicate that the device has appropriate temporal response to faithfully transduce neuronal spikes, and spatial resolution to capture impulse propagation along a single neuron. These simulations contribute to the development of multi-channel optrode arrays for spatio-temporal mapping of electric events in excitable biological tissue.

Compact integrated actively Q-switched waveguide laser.

A miniaturized deformed helix ferroelectric liquid crystal transducer cell was used in combination with a femtosecond laser inscribed active waveguide to realize a compact actively Q-switched laser source. The liquid crystal cell was controlled by a low-voltage frequency generator and laser pulse durations below 40 ns were demonstrated at repetition rates ranging from 0.1 kHz to 20 kHz and a maximum slope efficiency of up to 22%. This novel, integrated and low-cost laser source is a promising tool for a broad range of applications such as trace gas sensing, LIDAR, and nonlinear optics. To the best of our knowledge, this is the first demonstration of an actively Q-switched glass waveguide laser that has a user-variable repetition rate and can be fully integrated.

Role of AlN Polarity in the Band Alignment of AlN(0001)/Diamond(100) Heterojunctions: A First-Principles Study.

We present a comprehensive first-principles study of the band alignment at AlN(0001)/diamond(100) heterojunctions, considering two different polarities of the AlN and taking into account atomic relaxation at the interface. Our simulations show that the valence-band offset reduces dramatically from about 1.6 eV for one polarity to 0.6 eV for the other, changing the corresponding band alignment from staggered (type II) to straddling (type I). Our findings have important consequences for the design of many applications, most notably solid state UV-emitting devices.

Modeling the Debye dielectric response in the time domain for a liquid crystal-based biopotential optrode.

Multielectrode arrays (MEAs) are widely used for recording biopotentials, with an ongoing research effort to improve their characteristics and performance. In this spirit, we are currently investigating a novel concept for a liquid crystal-based optical electrode (optrode) that has the potential to overcome some of the limitations of MEAs, including that of wiring complexity. In this paper we present a model to fully describe the electrical response of the proposed optrode to biopotentials, taking into account dielectric relaxation. Since the frequency dependence of the complex permittivity is difficult to specify in time-stepped finite element (FE) simulations, where the implementation of time-convolution is nontrivial, we adopt an alternative approach to dielectric relaxation via the polarization vector. This approach, which is based on the Debye model, is then implemented in a FE model of the optrode. We show that the dielectric response of the liquid crystal layer has an effect on the complex signal behavior of the sensed biopotentials that must be taken into account when modeling the optrode.

Fast electro-optical mode in photo-aligned reflective deformed helix ferroelectric liquid crystal cells.

The electro-optical behavior of deformed helix ferroelectric liquid crystal in reflective mode is described in this paper. The electrically controlled reflectance has been measured at subkilohertz driving voltage frequency for different polarizations of the incident light and compared quite successfully with the simulation results.

Coupling slot-waveguide cavities for large-scale quantum optical devices.

By offering effective modal volumes significantly less than a cubic wavelength, slot-waveguide cavities offer a new in-road into strong atom-photon coupling in the visible regime. Here we explore two-dimensional arrays of coupled slot cavities which underpin designs for novel quantum emulators and polaritonic quantum phase transition devices. Specifically, we investigate the lateral coupling characteristics of diamond-air and GaP-air slot waveguides using numerically-assisted coupled-mode theory, and the longitudinal coupling properties via distributed Bragg reflectors using mode-propagation simulations. We find that slot-waveguide cavities in the Fabry-Perot arrangement can be coupled and effectively treated with a tight-binding description, and are a suitable platform for realizing Jaynes-Cummings-Hubbard physics.

Self-assembling electroactive hydrogels for flexible display technology.

We have assessed the potential of self-assembling hydrogels for use in conformal displays. The self-assembling process can be used to alter the transparency of the material to all visible light due to scattering by fibres. The reversible transition is shown to be of low energy by differential scanning calorimetry. For use in technology it is imperative that this transition is controlled electrically. We have thus synthesized novel self-assembling hydrogelator molecules which contain an electroactive group. The well-known redox couple of anthraquinone/anthrahydroquinone has been used as the hydrophobic component for a series of small molecule gelators. They are further functionalized with peptide combinations of L-phenylalanine and glycine to provide the hydrophilic group to complete 'head-tail' models of self-assembling gels. The gelation and electroactive characteristics of the series were assessed. Cyclic voltammetry shows the reversible redox cycle to be only superficially altered by functionalization. Additionally, spectroelectrochemical measurements show a reversible transparency and colour change induced by the redox process.

Circular and elliptical birefringence in spun microstructured optical fibres.

We investigate circular birefringence induced by spinning microstructured optical fibres during their fabrication to produce helical-shaped holes. Designs with an offset core which results in a helical path for the light and exhibit only circular birefringence and designs with a linearly birefringent core that result in elliptical birefringence are both investigated.

Slot-waveguide cavities for optical quantum information applications.

To take existing quantum optical experiments and devices into a more practical regimes requires the construction of robust, solid-state implementations. In particular, to observe the strong-coupling regime of tom-photon interactions requires very small cavities and large quality factors. Here we show that the slot-waveguide geometry recently introduced for photonic applications is also promising for quantum optical applications in the visible regime. We study diamond- and GaP-based slot-waveguide cavities (SWCs) compatible with diamond colour centres e.g. nitrogen-vacancy (NV) defect. We show that one can achieve increased single-photon Rabi frequencies of order O(10(11)) rad s(-1) in ultra-small cavity modal volumes, nearly 2 orders of magnitude smaller than previously studied diamond-based photonic crystal cavities.

Diamond waveguides fabricated by reactive ion etching.

We demonstrate for the first time the feasibility of all-diamond integrated optic devices over large areas using a combination of photolithography, reactive ion etching (RIE) and focused ion beam (FIB) techniques. We confirm the viability of this scalable process by demonstrating guidance in a two-moded ridge waveguide in type 1b single crystal diamond. This opens the door to the fabrication of a diamond-based optical chip integrating functional elements such as X-crossings, Y-junctions, evanescent couplers, Bragg reflectors/couplers and various interferometers.

Quantum dot and silica nanoparticle doped polymer optical fibers.

A novel and highly versatile doping method has been developed to allow active dopants, including materials incompatible with the polymer matrix, to be incorporated into microstructured polymer optical fibers through the use of nanoparticles. The incorporation of quantum dots and silica nanoparticles containing Rhodamine isothiocyanate is demonstrated.

Waveguide analysis of heat-drawn and chemically etched probe tips for scanning near-field optical microscopy.

We analyze two basic aspects of a scanning near-field optical microscope (SNOM) probe's operation: (i) spot-size evolution of the electric field along the probe with and without a metal layer, and (ii) a modal analysis of the SNOM probe, particularly in close proximity to the aperture. A slab waveguide model is utilized to minimize the analytical complexity, yet provides useful quantitative results--including losses associated with the metal coating--which can then be used as design rules.