A Bibliometric Analysis of Clear Aligner Treatment (CAT) From 2003 to 2023.

Clear aligner treatment (CAT) has been evolving over the past two decades. This study aims to conduct a comprehensive and up-to-date bibliometric analysis of publications related to CAT, presenting the research trends, landscapes, and hot spots in this field. All publications were retrieved from the Web of Science Core Collection from 2003 to 2023. In addition to a general analysis of research landscapes, the following items were analyzed, i.e., countries, institutions, authors, journals, publications, and keywords. A total of 1031 relevant publications were included in this study. From 2003 to the present, the number of publications and citations in this field showed an increasing trend. Italy led in terms of publication counts, and Sichuan University in China had the highest publication counts among institutions. In total, 33 scholars had published a minimum of 10 articles, and the collaborations among them were mostly within each country. The American Journal of Orthodontics and Dentofacial Orthopedics published the most relevant publications. "Predictability of tooth movements," "influencing factors for clinical efficacy," "biomechanics," and "patients' perception and periodontal health" stood out as the core research focus on CAT. Our study identified the most influential countries, institutions and authors, and their cooperative relationships, and detected hot research topics on CAT, calling for more high-quality international collaborative research in the future.

Exploration of bone metabolism status in the distal femur of mice at different growth stages.

The mouse femur, particularly the distal femur, is commonly utilized in orthopedic research. Despite its significance, little is known about the key events involved in the postnatal development of the distal femur. Therefore, investigating the development process of the mouse distal femur is of great importance. In this study, distal femurs of CD-1 mice aged 1, 2, 4, 6, and 8 weeks were examined. We found that the width and height of the distal femur continued to increase till the 4th week, followed with stabilization. Notably, the width to height ratio remained relatively consistent with age. Micro computed tomography analysis demonstrated gradual increases in bone volume/tissue volume, trabecular number, and trabecular thickness from 1 to 6 weeks, alongside a gradual decrease in trabecular separation. Histological analysis further indicated the appearance of the secondary ossification center at approximately 2 weeks, with ossification mostly completed by 4 weeks, leading to the formation of a prototype epiphyseal plate. Subsequently, the epiphyseal plate gradually narrowed at 6 and 8 weeks. Moreover, the thickness and maturity of the bone cortex surrounding the epiphyseal plate increased over time, reaching peak cortical bone density at 8 weeks. In conclusion, to enhance model stability and operational ease, we recommend constructing conventional mouse models of the distal femur between 4 and 8 weeks old.

Uprighting and protraction of two unilateral mandibular molars using a cantilever arm through a sophisticated biomechanical system with clear aligner: A case report.

Although clear aligner can be efficient and predictable in some tooth movements, mandibular molar protraction is the least predictable owing to biological and biomechanical limitations. This case report presents a 20-year-old female with poor prognosed left mandibular first molar (#36), deviated dental midline and mild crowding. After extraction of #36, clear aligners and an Albert cantilever were used for treatment. Through carefully designed dual mechanical system, we achieved uprighting and protraction of #37 within 27 months, with crown and root movements of 9.9mm and 12.1mm, respectively. The predictability of the crown and root movement was 107.6% and 84.6%. Coincident dental and facial midline, class I molar and canine relationship and good root parallelism were also achieved. Large-distance mandibular molar protraction can be achieved effectively with a combination of Albert cantilever arm and clear aligner.

Development of a novel three-dimensional injection guide for trigeminal ganglia.

BACKGROUND: Trigeminal ganglion (TG) plays an important role in the process of orthodontic pain. It's necessary to design an accurate, precise and minimally invasive trigeminal ganglion injection guide plate to study TG. METHODS: Micro-CT was used to obtain the Dicom format data, and three-dimensional (3D) software (mimics and magics23.03) was used to reconstruct 3D head models. Design and modifications of the TG injection guide plate were performed in Magic 23.03 software, and the guide plate was produced by a 3D stereolithography printer. X-ray, micro-CT, Evans blue, and virus transduction were used to demonstrate the accuracy of the guide-assisted injection. Pain levels were evaluated after using the injection guide by a bite force test and Von Frey test. RESULTS: X-ray and micro-CT tests confirmed that the injection needle reached the bilateral trigeminal ganglia fossa. The Evans blue test and virus transduction proved that the injected drug could be accurately injected into the bilateral trigeminal ganglion and the lentivirus could be successfully transfected. The percentage of accurate injection was 10/10 (bilateral trigeminal ganglia). Orofacial pain induced by the trigeminal ganglion injection was mild and returned to baseline within seven days. CONCLUSION: The injection guide described in this study is viable and reliable for the delivery of drugs and virus transduction into the trigeminal ganglia.

Protraction of Mandibular Second Molar for Substitution of Adjacent Missing First Molar With a Mini-Implant-Anchored Albert Loop Appliance.

Protraction of mandibular posterior teeth into edentulous regions is challenging in clinical practice. This case demonstrated a minor tooth movement of a mandibular second molar to substitute its adjacent missing first molar in a 15-year-old female. An efficient bodily movement of the mandibular second molar was achieved through a mini-implant-anchored protraction loop appliance. With this carefully designed biomechanical system, over 10-mm molar protraction was accomplished within 14 months without mesial or lingual tipping. The adjacent third molar erupted spontaneously during the protraction process and drafted mesially. Through brackets and segmented archwire after the protraction, the second and third molars were successfully protracted and good buccal interdigitation was achieved. The combination of the Albert protraction loop and mini-implant allows for more efficient protraction of the mandibular molars, avoiding mesial tipping and lingual rotation of the molars.

Evaluation of Optimal Insertion Sites and Angles for Orthodontic Mini-Implants at the Anterior Nasal Spine Region Based on Cone-Beam Computed Tomography.

BACKGROUND: To infer the optimal angulation and height level of mini-implant insertion in the anterior nasal spine (ANS) region from alveolar bone depth (BD) and labial cortical bone thickness (CBT) through cone-beam computed tomography (CBCT), the influences of sex, age, and growth pattern on BD, CBT, and the starting point of the ANS were examined. MATERIAL AND METHODS: BD and CBT were measured on CBCT median sagittal images at specific angles (0, 15, 30, 45, and 60 degrees) to simulate the angulation of insertion. The height level of the first axial image with obvious bone ridge was recorded as the start of ANS. RESULTS: The average height of ANS start was 9.42 mm from the alveolar bone crest between the central incisors. The variations in height level and insertion angle combined, or either of them individually, significantly influenced BD and CBT, demonstrating overall decreasing trends (p < 0.001). BD was not influenced by sex, age, or growth pattern (p > 0.05). However, CBT was found to be correlated with sex and growth pattern, while the height level of ANS start was associated only with growth pattern, particularly in hypodivergent patients (p < 0.05). CONCLUSION: The recommended insertion height level is 14-16 mm from the alveolar bone crest and the recommended angulation is 30-45°. An innovative inequity in the relationship between a certain height level and the insertion angulation is proposed.

Initial arch wires used in orthodontic treatment with fixed appliances.

BACKGROUND: Initial arch wires are the first arch wires inserted into fixed appliance at the beginning of orthodontic treatment. With a number of different types of orthodontic arch wires available for initial tooth alignment, it is important to understand which are most efficient and which cause the least amount of root resorption and pain during the initial aligning stage of treatment. This is the third update of a Cochrane review first published in 2010. OBJECTIVES: To assess the effects of initial arch wires for the alignment of teeth with fixed orthodontic braces, in terms of the rate of tooth alignment, amount of root resorption accompanying tooth movement, and intensity of pain experienced by patients during the initial alignment stage of treatment. SEARCH METHODS: We searched Cochrane Oral Health's Trials Register, CENTRAL, MEDLINE, Embase, and two ongoing trials registries on 4 July 2022. SELECTION CRITERIA: We included randomised controlled trials (RCTs) of different initial arch wires used to align teeth with fixed orthodontic braces. We included people with full-arch fixed orthodontic appliances on the upper arch, lower arch, or both arches. DATA COLLECTION AND ANALYSIS: Two independent review authors were responsible for study selection, data extraction, and assessment of risk of bias in included studies. We contacted corresponding authors of included studies to obtain missing information. We resolved disagreements by discussion between the review authors. Our main outcomes were alignment rate (movement of teeth in mm), root resorption, time to alignment, and intensity of pain measured on a 100-mm visual analogue scale (VAS). We pooled data from studies with similar interventions and outcomes using random-effects models. We reported mean differences (MDs) with 95% confidence intervals (CIs) for continuous data, risk ratios (RRs) with 95% CIs for dichotomous data, and alignment rate ratios with 95% CIs for time-to-event data. Two independent review authors assessed the certainty of evidence. We resolved disagreements by discussion between the review authors. MAIN RESULTS: We included 29 RCTs with 1915 participants (2581 arches) in this review. Studies were generally small (sample sizes ranged from 14 to 200 participants). Duration of follow-up varied between three days and six months. Eleven studies received funding, six received no funding, and 12 provided no information about funding sources. We judged eight studies at high risk of bias, nine at low risk, and 12 at unclear risk. We grouped the studies into six main comparisons. Multistrand stainless steel wires versus wires composed of other materials Six studies with 409 participants (545 arches) evaluated multistrand stainless steel (StSt) wires versus wires composed of other materials. We are very uncertain about the effect of multistrand StSt wires versus other wires on alignment rate (4 studies, 281 participants, 417 arches; very low-certainty evidence). There may be little to no difference between multistrand StSt wires and other wires in terms of intensity of pain (MD -2.68 mm, 95% CI -6.75 to 1.38; 2 studies, 127 participants, 127 arches; low-certainty evidence). Conventional nickel-titanium wires versus superelastic nickel-titanium wires Four studies with 266 participants (274 arches) evaluated conventional nickel-titanium (NiTi) wires versus superelastic NiTi wires. There may be little to no difference between the different wire types in terms of alignment rate (124 participants, 124 arches, 2 studies; low-certainty evidence) and intensity of pain (MD -0.29 mm, 95% CI -1.10 to 0.52; 2 studies, 142 participants, 150 arches; low-certainty evidence). Conventional nickel-titanium wires versus thermoelastic copper-nickel-titanium wires Three studies with 210 participants (210 arches) evaluated conventional Ni-Ti versus thermoelastic copper-nickel-titanium (CuNiTi) wires. We are very uncertain about the effects of the different arch wires on alignment rate (1 study, 66 participants, 66 arches; very low-certainty evidence). There may be little to no difference between conventional NiTi wires and thermoelastic CuNiTi wires in terms of time to alignment (alignment rate ratio 1.30, 95% CI 0.68 to 2.50; 1 study, 60 participants, 60 arches; low-certainty evidence). Superelastic nickel-titanium wires versus thermoelastic nickel-titanium wires Twelve studies with 703 participants (936 arches) evaluated superelastic NiTi versus thermoelastic NiTi wires. There may be little to no difference between superelastic NiTi wires and thermoelastic NiTi wires in alignment rate at four weeks (MD -0.28 mm, 95% CI 0.62 to 0.06; 5 studies, 183 participants, 183 arches; low-certainty evidence). We are very uncertain about the effects of the different wires on root resorption (2 studies, 52 participants, 312 teeth; very low-certainty evidence). Superelastic NiTi wires compared with thermoelastic NiTi wires may result in a slight increase in time to alignment (MD 0.5 months, 95% CI 0.21 to 0.79; 1 study, 32 participants, 32 arches; low-certainty evidence) but are probably associated with a slight increase in intensity of pain (MD 6.96 mm, 95% CI 1.82 to 12.10; 3 studies, 94 participants, 138 arches, moderate-certainty evidence). Single-strand superelastic nickel-titanium wires versus coaxial superelastic nickel-titanium wires Three studies with 104 participants (104 arches) evaluated single-strand superelastic NiTi versus coaxial superelastic NiTi wires. Use of single-strand superelastic NiTi wires compared with coaxial superelastic NiTi wires probably results in a slight reduction in alignment rate at four weeks (MD -2.64 mm, 95% CI -4.61 to -0.67; 2 studies, 64 participants, 64 arches, moderate-certainty evidence). Different sizes of nickel-titanium wires Two studies with 149 participants (232 arches) compared different types of NiTi wires. There may be little to no difference between different sizes of NiTi wires in terms of pain (low-certainty evidence). AUTHORS' CONCLUSIONS: Superelastic NiTi wires probably produce slightly more pain after one day than thermoelastic NiTi wires, and single-strand superelastic NiTi wires probably have a lower alignment rate over four weeks compared with coaxial superelastic NiTi wires. All other evidence on alignment rate, root resorption, time to alignment, and pain is of low or very low certainty in all comparisons. Therefore, there is insufficient evidence to determine whether any particular arch wire material or size is superior to any other. The findings of this review are imprecise and unreliable; well-designed larger studies are needed to give better estimates of the benefits and harms of different arch wires. Orthodontists should exercise caution when interpreting the findings of this review and be prepared to adapt their treatment plans based on individual patient needs.

Orthodontic Practitioners' Knowledge and Education Demand on Clear Aligner Therapy.

OBJECTIVES: Clear aligner therapy (CAT) has been gaining popularity amongst the orthodontic community. No systematic course on CAT has been reported to date. The objectives of this study were to determine practitioners' knowledge and to offer insights for future tailored courses on CAT. METHODS: An online questionnaire was distributed. The questionnaire comprised personal background information, predictability of tooth movement through CAT, and CAT knowledge that practitioners demanded to learn. Four senior expert orthodontists' answers to the predictability of tooth movement through CAT were averaged to be a standard reference. Descriptive statistics, 1-way analysis of variance (ANOVA), principal component analysis, Student t test, and multivariate logistics regression analysis were performed with significance set at P < .05. RESULTS: In total, 190 practitioners participated in this study. As compared to the standard reference, participants overestimated the predictability of difficult-to-be-achived tooth movements (eg, molar mesialisation; P < .0001). Strategy of managing troubleshooting cases and extraction cases ranked the highest CAT knowledge that participants requested to learn. Practice type, number of completed CAT cases, number of undergoing CAT cases, years of practice, education background, and time of using CAT were the influencing factors of the questions regarding the predictability of tooth movement through CAT and CAT knowledge that were demanded to be learned. CONCLUSIONS: The predictability of difficult-to-be-achieved tooth movement through CAT is often overestimated by practitioners with limited clinical experience. Tailored education on CAT, especially managing troubleshooting cases and extraction cases, should be designed for all practitioners.

Characteristics of oral microbiota and oral health in the patients treated with clear aligners: a prospective study.

OBJECTIVES: In this prospective clinical study, the effect of clear aligners on periodontal health and oral hygiene was examined. As the same time, microbial changes of the aligner tray and subgingival microbiota community were investigated. METHODS: The study recruited fifteen patients, and clinical parameters were recorded at three different time points: before the initiation of aligner treatment (T0), 1 month after treatment onset (T1), and 3 months after treatment onset (T3). Plaque samples were collected from the inner surface of aligners and subgingival sulcus at each of these time points. The microbial composition of the samples was analyzed using 16S rRNA gene sequencing, and changes were evaluated based on the abundance of amplicon sequence variants (ASVs). RESULTS: Reduction in plaque index and improvement in periodontal health were observed. In aligner tray plaque samples, the relative abundance of Streptococcus increased significantly, as well as the richness and diversity of microbiota decreased substantially as the duration of treatment time. In subgingival plaque samples, alpha and beta diversity of microbiota did not change significantly. CONCLUSIONS: During the clear aligner treatment, the patients' periodontium remained in a healthy condition, and clear aligner treatment had no significant impact on the composition of subgingival microbiota. The structure of the aligner tray microbiota altered significantly at both phylum and genus levels and attracted a unique and less diverse microbiota community. CLABSINABSICAL RELEVANCE: Clear aligner treatment has no significant impact on periodontal health and subgingival microbiota composition of patients.

Impact of Clear Aligners on Oral Health and Oral Microbiome During Orthodontic Treatment.

The demand for clear aligners has risen over the past decade because they satisfy patients' desire for less noticeable and more comfortable orthodontic appliances. Because clear aligners are increasingly used in orthodontics, there is a big push to learn more about the physiologic and microbial changes that occur during treatment. The present work highlighted further links between clear aligners and changes in oral health and the oral microbiome and provided plaque control methods for clear aligner trays. Existing literature revealed that clear aligners have no significant influence on the structure of the oral microbiome during orthodontic therapy. Clear aligner treatment demonstrated promising results in terms of controlling plaque index, gingival health, and the prevalence of white spot lesions. Nevertheless, grooves, ridges, microcracks, and abrasions on the aligner surface would provide a prime environment for bacterial adherence and the development of plaque biofilms. A combination of mechanical and chemical methods seems to be a successful approach for removing plaque biofilm from aligners whilst also preventing pigment adsorption.

Radiographic Features of Mandibular Second Molars with Eruption Disturbances: A Retrospective Study.

We aimed to establish the characteristics and potential etiological risk factors of eruption disturbances in mandibular second molars (MM2). We retrospectively enrolled patients with eruption disturbances in MM2. A total of 143 MM2 with eruption disturbances from 112 patients (mean age 17.45 ± 6.35) were included in this study. Panoramic radiographs were employed to determine the risk factor, angulation type, impaction depth, tooth development stage, and associated pathology. The novel classification method of MM2 was based on impaction depth and angulation. Of 143 MM2, 137 and 6 were diagnosed with impaction and retention, respectively. Insufficient space was the most frequent risk factor for eruption disturbances. There were no significant differences between retention and impaction regarding sex, age, or side. The most frequent impaction type was Type I. The most frequent angulation of impacted MM2 was mesioangular. Impacted MM2 with shallower depth were more frequently associated with the presence of first molar undercut. Impaction types did not differ according to age, side, development stage, or distance from the MM1 distal surface to the anterior border of the ramus. Dentigerous cysts were associated with earlier MM2 development stages and greater MM2 depth. In conclusion, MM2 impaction types differed according to the risk factor, angulation type, MM1 undercut, and presence of cysts. Early MM2 development stage and greater MM2 depth were risk factors for MM2 eruption disturbances with cysts.

The EDA/EDAR/NF-κB pathway in non-syndromic tooth agenesis: A genetic perspective.

Non-syndromic tooth agenesis (NSTA) is one of the most common dental developmental malformations affected by genetic factors predominantly. Among all 36 candidate genes reported in NSTA individuals, EDA, EDAR, and EDARADD play essential roles in ectodermal organ development. As members of the EDA/EDAR/NF-κB signaling pathway, mutations in these genes have been implicated in the pathogenesis of NSTA, as well as hypohidrotic ectodermal dysplasia (HED), a rare genetic disorder that affects multiple ectodermal structures, including teeth. This review provides an overview of the current knowledge on the genetic basis of NSTA, with a focus on the pathogenic effects of the EDA/EDAR/NF-κB signaling pathway and the role of EDA, EDAR, and EDARADD mutations in developmental tooth defects. We also discuss the phenotypic overlap and genetic differences between NSTA and HED. Ultimately, this review highlights the importance of genetic analysis in diagnosing and managing NSTA and related ectodermal disorders, and the need for ongoing research to improve our understanding of these conditions.

The effects of aligner anchorage preparation on mandibular first molars during premolar-extraction space closure with clear aligners: A finite element study.

INTRODUCTION: This study aimed to determine the effectiveness of different aligner anchorage preparations on mandibular first molars during premolar-extraction space closure with clear aligners and to assess the effects of different modes of Class II elastics on mandibular first molars. METHODS: Finite element models were constructed on the basis of cone-beam computed tomography data from an orthodontic patient. The models comprised maxilla, mandible, maxillary and mandibular teeth without first premolars, periodontal ligaments, attachments and aligners. Tooth displacement tendencies were calculated using different aligner anchorage preparations and Class II elastics on the models from the same patient. Three group sets were designed on the basis of the positions of aligner cutouts and buttons (mesiobuccal, distobuccal and lingual). Four groups were established in each of the 3 group sets. Four groups were created: (1) no elastic traction + no anchorage preparation, (2) anchorage preparation only, (3) elastic traction only, and (4) elastic traction + anchorage preparation. Different aligner anchorage preparations (0°, 1°, 2°, 3°) were applied on mandibular second premolars and molars. The Class II traction force was set to 100 g. RESULTS: With clear aligners, mandibular first molars were subject to mesial tipping, lingual tipping and intrusion. In the condition of no elastic traction, aligner anchorage preparation resulted in distal tipping, buccal tipping, and extrusion effect on mandibular first molars. Aligner anchorage preparation was more effective in the distal and lingual cutout groups than in the mesial cutout group. In the condition of Class II elastic traction, the bodily movement of mandibular first molars was achieved with a 3° anchorage preparation for the mesial cutout group and a 1.7° anchorage preparation for distal and lingual cutout groups. Absolute maximal anchorage was achieved with a 2° anchorage preparation for distal and lingual cutout groups. CONCLUSIONS: Clear aligner therapy caused mesial tipping, lingual tipping and intrusion of mandibular first molars during premolar-extraction space closure. Aligner anchorage preparation effectively prevented mesial and lingual tipping of mandibular molars. Distal and lingual cutout modes were more effective than mesial cutout modes in aligner anchorage preparation. For each aligner stage (0.25 mm), 1.7° aligner anchorage preparation and Class II elastics with distal or lingual cutouts led to the bodily movement of mandibular first molars, whereas 2° anchorage preparation reached absolute maximal anchorage.

Effectiveness of clear aligners in achieving proclination and intrusion of incisors among Class II division 2 patients: a multivariate analysis.

BACKGROUND: The predictability of incisor movement achieved by clear aligners among Class II division 2 patients is poorly understood. The aim of this retrospective study was to determine the effectiveness of clear aligners in proclining and intruding upper incisors and its influencing factors. METHODS: Eligible patients with Class II division 2 malocclusion were included. For clear aligner therapy, three types of incisor movements were designed: proclination, intrusion and labial movement. Pre-treatment and post-treatment dental models were superimposed. The differences between predicted and actual (DPA) tooth movement of incisors were analyzed. Univariate and multivariate linear regression were used to analyze the potential influencing factors. RESULTS: A total of 51 patients and their 173 upper incisors were included. Actual incisor proclination and intrusion were less than predicted ones (both P < 0.001), while actual labial movement was greater than predicted one (P < 0.001). Predictability of incisor proclination and intrusion was 69.8% and 53.3%, respectively. Multivariate linear regression revealed that DPA of proclination was significantly positively associated with predicted proclination (B = 0.174, P < 0.001), ipsilateral premolar extraction (B = 2.773, P < 0.001) and ipsilateral canine proclination (B = 1.811, P < 0.05), while negatively associated with molar distalization (B = - 2.085, P < 0.05). The DPA of intrusion was significantly positively correlated with predicted intrusion (B = 0.556, P < 0.001) while negatively associated with labial mini-implants (B = - 1.466, P < 0.001). The DPA of labial movement was significantly positively associated with predicted labial movement (B = 0.481, P < 0.001), while negatively correlated with molar distalization (B = - 1.004, P < 0.001), labial mini-implants (B = - 0.738, P < 0.001) and age (B = - 0.486, P < 0.05). CONCLUSIONS: For Class II division 2 patients, predicted incisor proclination (69.8%) and intrusion (53.3%) are partially achieved with clear aligner therapy. Excessive labial movement (0.7 mm) of incisors may be achieved. Incisor movement is influenced by predicted movement amount, premolar extraction, canine proclination, molar distalization, mini-implants and age.

Characteristics of Spatial Changes in Molars and Alveolar Bone Resorption among Patients with Loss of Mandibular First Molars: A CBCT-Based Morphometric Study.

OBJECTIVES: To investigate the characteristics of spatial changes in molars and alveolar bone resorption among patients with loss of mandibular first molars. METHODS: A total of 42 CBCT scans of patients with missing mandibular first molars (3 males, 33 females) and 42 CBCT scans of control subjects without loss of mandibular first molars (9 males, 27 females) were evaluated in this cross-sectional study. All images were standardized using the mandibular posterior tooth plane with Invivo software. The following indices regarding alveolar bone morphology were measured, including alveolar bone height, bone width, mesiodistal and buccolingual angulation of molars, overeruption of maxillary first molars, bone defects, and the capability of molar mesialization. RESULTS: The vertical alveolar bone height in the missing group was reduced by 1.42 ± 0.70 mm, 1.31 ± 0.68, and 1.46 ± 0.85 mm on the buccal, middle, and lingual side, respectively (no differences among the three sides; p > 0.05). Alveolar bone width was reduced the greatest at the buccal CEJ level and the least at the lingual apex level. Mandibular second molar mesial tipping (with mean of the mesiodistal angulation = 57.47 ± 10.34°) and lingual tipping (with mean of the buccolingual angulation = 71.75 ± 8.34°) were observed. The mesial and distal cusps of maxillary first molars were extruded by 1.37 mm and 0.85 mm, respectively. Buccal and lingual defects of alveolar bone occurred at the CEJ, mid-root, and apex levels. Through 3D simulation, the second molar cannot be successfully mesialized into the missing tooth position, and the difference between the available and required distances for mesialization was the greatest at the CEJ level. The duration of tooth loss was significantly correlated with the mesio-distal angulation (R = -0.726, p < 0.001), buccal-lingual angulation (R = -0.528, p < 0.001) and the extrusion of the maxillary first molar (R = -0.334, p < 0.05). CONCLUSION: Both vertical and horizontal resorption of alveolar bone occurred. Mandibular second molars exhibit mesial and lingual tipping. Lingual root torque and uprighting of the second molars are needed for the success of molar protraction. Bone augmentation is indicated for severely resorbed alveolar bone.

Association of Body Mass Index (BMI) with Lip Morphology Characteristics: A Cross-Sectional Study Based on Chinese Population.

BACKGROUND: Lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery to ensure facial aesthetics. Body mass index (BMI) has proved to have influence on facial soft tissue thickness, but its relationship with lip morphology is unclear. This study aimed to evaluate the association between BMI and lip morphology characteristics (LMCs) and thus provide information for personalized treatment. METHODS: A cross-sectional study consisted of 1185 patients from 1 January 2010 to 31 December 2020 was conducted. Confounders of demography, dental features, skeletal parameters and LMCs were adjusted by multivariable linear regression to identify the association between BMI and LMCs. Group differences were evaluated with two-samples t-test and one-way ANOVA test. Mediation analysis was used for indirect effects assessment. RESULTS: After adjusting for confounders, BMI is independently associated with upper lip length (0.039, [0.002-0.075]), soft pogonion thickness (0.120, [0.073-0.168]), inferior sulcus depth (0.040, [0.018-0.063]), lower lip length (0.208, [0.139-0.276]), and curve fitting revealed non-linearity to BMI in obese patients. Mediation analysis found BMI was associated with superior sulcus depth and basic upper lip thickness through upper lip length. CONCLUSIONS: BMI is positively associated with LMCs, except for nasolabial angle as negatively, while obese patients reverse or weaken these associations.

The effect of antibiotics on the periodontal treatment of diabetic patients with periodontitis: A systematic review and meta-analysis.

Background: The aim of this meta-analysis was to compare the effects of periodontal treatment with or without adjunctive antibiotic on periodontal status and blood glucose level in diabetic patients with periodontitis. Methods: A search using electronic database (MEDLINE, EMBASE, and Cochrane Central Register of Controlled Trials) and a manual search were performed up to July 2022. Eligible 13 RCTs were included according to inclusion and exclusion criteria. Reviewers independently performed data screening, data selection, data extraction, and risk of bias. Quality assessment was performed according to the Cochrane Handbook for Systematic Reviews of Interventions. Weighted mean differences and 95% confidence intervals (CIs) for continuous outcomes were calculated using random or fixed-effects models. This review is registered in the PROSPERO database (CRD42022347803). Results: Of the 13 included articles, eight were on the use of systemic antibiotics and five on topical antibiotics. The results showed statistically significant improvement in periodontal status (probing depth, clinical attachment loss and bleeding on probing) at 6 months with systematic antibiotics use (PD-6M p = 0.04, BOP-6M p < 0.0001, CAL-6M p = 0.002). The improvement in PD with topical antibiotics was statistically significant at 1 month (p = 0.0006). However, there was no statistically significant improvement in periodontal status at 3 months with adjuvant systemic antibiotics. Conclusion: Antibiotics can improve the periodontal condition of diabetic patients with periodontitis to a certain extent. In clinical practice, it is necessary to comprehensively consider the balance of benefits and risks before deciding whether to use antibiotics. Systematic Review Registration: Identifier CRD42022347803, https://www.crd.york.ac.uk/PROSPERO/.

Comparison of three-dimensional maxillary growth across spheno-occipital synchondrosis maturation stages.

BACKGROUND: This study aimed to three-dimensionally compare the maxillary growth among the spheno-occipital synchondrosis (SOS) maturation stages in both genders. METHODS: This is a cross-sectional study of a retrospective type in which cone-beam computed tomography (CBCT) images of 500 patients aged 6 to 25 years (226 males and 274 females) were analyzed. The SOS was evaluated using the four-stage scoring system; completely open, partially fused, semi-fused, or completely fused. The SOS scoring and three-dimensional cephalometric measurements were analyzed by Invivo 6.0.3 software. Descriptive and analytical statistics were performed and a P-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant difference in maxillary measurements among SOS maturation stages in both genders (P < 0.05). The mean differences in the maxillary growth among the SOS maturation stages between SOS stages 2 and 3 were higher than those between stages 1and 2 and stages 3 and 4 for maxillary length and height in both genders. However, the mean difference in the maxillary width was higher between SOS stages 1 and 2 than those stages 2 and 3 and stages 3 and 4. On other hand, there may be lesser maxillary growth between SOS stages 3 and 4 for maxillary width, length (in males), and height. The growth curves showed high active growth of the maxilla as the SOS was still fusing (especially stage 2 and 3) than those of the fused (stage 4). Moreover, the acceleration of growth occurred earlier in females than males regarding chronological age but not for SOS maturation stages. CONCLUSIONS: The SOS maturation stages are valid and reliable maxillary skeletal maturation indicators for three-dimensional maxillary growth in both genders.

Artificial intelligence-assisted determination of available sites for palatal orthodontic mini implants based on palatal thickness through CBCT.

OBJECTIVES: To develop an artificial intelligence (AI) system for automatic palate segmentation through CBCT, and to determine the personalized available sites for palatal mini implants by measuring palatal bone and soft tissue thickness according to the AI-predicted results. MATERIALS AND METHODS: Eight thousand four hundred target slices (from 70 CBCT scans) from orthodontic patients were collected, labelled by well-trained orthodontists and randomly divided into two groups: a training set and a test set. After the deep learning process, we evaluated the performance of our deep learning model with the mean Dice similarity coefficient (DSC), average symmetric surface distance (ASSD), sensitivity (SEN), positive predictive value (PPV) and mean thickness percentage error (MTPE). The pixel traversal method was proposed to measure the thickness of palatal bone and soft tissue, and to predict available sites for palatal orthodontic mini implants. Then, an example of available sites for palatal mini implants from the test set was mapped. RESULTS: The average DSC, ASSD, SEN, PPV and MTPE for the segmented palatal bone tissue were 0.831%, 1.122%, 0.876%, 0.815% and 6.70%, while that for the palatal soft tissue were 0.741%, 1.091%, 0.861%, 0.695% and 12.2%, respectively. Besides, an example of available sites for palatal mini implants was mapped according to predefined criteria. CONCLUSIONS: Our AI system showed high accuracy for palatal segmentation and thickness measurement, which is helpful for the determination of available sites and the design of a surgical guide for palatal orthodontic mini implants.

Collision of Commonality and Personalization: Better Understanding of the Periosteum.

The periosteum is quite essential for bone repair. The excellent osteogenic properties of periosteal tissue make it a popular choice for accelerated osteogenesis in tissue engineering. With advances in research and technology, renewed attention has been paid to the periosteum. Recent studies have shown that the complexity of the periosteum is not only limited to histological features but also includes genetic and phenotypic features. In addition, the periosteum is proved to be quite site-specific in many ways. This brings challenges to the selection of periosteal donor sites. Limited understanding of the periosteum sets up barriers to developing optimal tissue regeneration strategies. A better understanding of periosteum could lead to better applications. Therefore, we reviewed the histological structure, gene expression, and function of the periosteum from both the commonality and personalization. It aims to discuss some obscure issues and untapped potential of periosteum and artificial periosteum in the application, where further theoretical research is needed. Overall, the site-specificity of the periosteum needs to be fully considered in future applications. However, significant further work is needed in relevant clinical trials to promote the further development of artificial periosteum.