RESUMEN
A series of Fe2O3@LSF (La0.8Sr0.2FeO3-δ perovskite) core-shell materials (CSM) was prepared by infiltration of LSF precursors gel containing various complexants and their mixtures to nanocrystalline aggregates of hematite followed by thermal treatment. The content of LSF phase and amount of carboxyl groups in complexant determine the percent coverage of iron oxide core with the LSF shell. The most conformal coating core-shell material was prepared with citric acid as the complexant, contained 60 wt% LSF with 98% core coverage. The morphology of the CSM was studied by HRTEM-EELS combined with SEM-FIB for particles cross-sections. The reactivity of surface oxygen species and their amounts were determined by H2-TPR, TGA-DTG, the oxidation state of surface oxygen ions by XPS. It was found that at complete core coverage with perovskite shell, the distribution of surface oxygen species according to redox reactivity in CSM resemble pure LSF, but its lattice oxygen storage capacity is 2-2.5 times higher. At partial coverage, the distribution of surface oxygen species according to redox reactivity resembles that in iron oxide.
RESUMEN
This work shows conclusively that lamellar surface patterns can be obtained with diverse ceramic compositions during electrospinning. The lamellar structure formation is governed by the creation of an outer shell during the thermal treatment of initially uniform cylindrical fibers, consisting of polymer and pre-ceramic compounds. By changing the polymer to pre-ceramic ratio in the electrospinning solution, we demonstrate for the first time a facile way to control the obtained surface structure and the orientation of the lamellas. Furthermore, the lamellar morphology was illustrated in seven different compositions. This report provides a new pathway to obtain unique surface patterns in metal-oxide nanofibers and demonstrates their utilization in different applications. Specifically, we demonstrate the prospect of utilizing Ni-Al-O fibers with lamellar structures as alternative Li-ion battery anodes. In addition, we show the potential of Fe-Al-O fibers as an effective catalyst material.
RESUMEN
Ceramic nanobelt catalysts consisting of Fe-Al-O spinel modified with potassium were synthesized for CO2 hydrogenation into hydrocarbons. Nanobelts and hollow nanofibers were produced utilizing the internal heat released by oxidation of the organic component within the fibers. This extremely fast and short heating facilitated crystallization of the desired phase, while maintaining small grains and a large surface area. We investigated the effects of mat thickness, composition, and heating rate on the final morphology. A general transformation mechanism for electrospun nanofibers that correlates for the first time the mat's thickness and the rate of oxidation during thermal treatment was proposed. The catalytic performance of carburized ceramic K/Fe-Al-O nanobelts was compared to the K/Fe-Al-O spinel powder. The electrospun catalyst showed a superior carbon dioxide conversion of 48% and a selectivity of 52% to light C2-C5 olefins, while the powder catalyst produced mainly C6+ hydrocarbons. Characterization of steady state catalytic materials by energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and N2-adsorption methods revealed that high olefin selectivity of the electrospun materials is related to a high extent of reduction of surface iron atoms because of more efficient interaction with the potassium promoter.
RESUMEN
Carbon dioxide and water are renewable and the most abundant feedstocks for the production of chemicals and fungible fuels. However, the current technologies for production of hydrogen from water are not competitive. Therefore, reacting carbon dioxide with hydrogen is not economically viable in the near future. Other alternatives include natural gas, biogas or biomass for the production of carbon dioxide, hydrogen and carbon monoxide mixtures that react to yield chemicals and fungible fuels. The latter process requires a high performance catalyst that enhances the reverse water-gas-shift (RWGS) reaction and Fischer-Tropsch synthesis (FTS) to higher hydrocarbons combined with an optimal reactor system. Important aspects of a novel catalyst, based on a Fe spinel and three-reactor system developed for this purpose published in our recent paper and patent, were investigated in this study. Potassium was found to be a key promoter that improves the reaction rates of the RWGS and FTS and increases the selectivity of higher hydrocarbons while producing mostly olefins. It changed the texture of the catalyst, stabilized the Fe-Al-O spinel, thus preventing decomposition into Fe3O4 and Al2O3. Potassium also increased the content of Fe5C2 while shifting Fe in the oxide and carbide phases to a more reduced state. In addition, it increased the relative exposure of carbide iron on the catalysts surface, the CO2 adsorption and the adsorption strength. A detailed kinetic model of the RWGS, FTS and methanation reactions was developed for the Fe spinel catalyst based on extensive experimental data measured over a range of operating conditions. Significant oligomerization activity of the catalyst was found. Testing the pelletized catalyst with CO2, CO and H2 mixtures over a range of operating conditions demonstrated its high productivity to higher hydrocarbons. The composition of the liquid (C5+) was found to be a function of the potassium content and the composition of the feedstock.
RESUMEN
Carbon dioxide hydrogenation to form hydrocarbons was conducted on two iron-based catalysts, prepared according to procedures described in the literature, and on a new iron spinel catalyst. The CO2 conversion measured in a packed-bed reactor was limited to about 60% because of excessive amounts of water produced in this process. Switching to a system of three packed-bed reactors in series with interim removal of water and condensed hydrocarbons increased CO2 conversion to as much as 89%. The pure spinel catalyst displayed a significantly higher activity and selectivity than those of the other iron catalysts. This process produces a product called green feed, which is similar in composition to the product of a high-temperature, iron-based FischerTropsch process from syngas. The green feed can be readily converted into renewable fuels by well-established technologies.
Asunto(s)
Dióxido de Carbono/química , Tecnología Química Verde , Hidrocarburos/química , Hidrógeno/química , Aluminio/química , Catálisis , Compuestos Férricos/química , Hidrogenación , Agua/químicaRESUMEN
The increase of the surface basicity-acidity of MgO material by factors of 1.8-3.0 due to consolidation of its nanocrystals was demonstrated by the indicator titration. It was shown that the parallel increase of surface acidity and basicity is attributed to the formation of grain boundaries (GB) after MgO aerogel densification. A simple model predicting the increase of surface acidity-basicity of MgO that correlates with the results of direct measurements was proposed. The model is based on the study of the fine atomic structure at GB surface areas in consolidated MgO nanocrystals in the framework of Density Functional Theory. It is found that the displacements of coordinatively unsaturated surface ions near the GB are significant at the distances ~3-4 atomic layers from the geometrical contact plane between nanocrystals. The detailed analysis of atomic positions inside GB demonstrated the coordination deficiency of surface atoms at the GB areas leading to the formation of stretched bonds and to creation of low coordinated surface ions due to splitting of coordination numbers of surface atoms belonging to GB areas. Density of states for electrons shows the existence of additional states in the band gap close to the bottom of the conduction band. The adsorption energy of CO2 molecules atop oxygen atoms exposed at surface GB areas is of the same order of magnitude as that reported for oxygen atoms at crystallographic edges and corners of MgO crystals. It provides additional options for bonding of molecules at the surface of nanocrystalline MgO increasing the adsorption capacity and catalytic activity.
RESUMEN
Highly dispersed Pt nanoparticles were incorporated in CeO2 nanopowders by an ultrasound-assisted reduction procedure. The activity of the Pt/CeO2 catalysts was studied in the reaction of the ethyl acetate combustion, and complete conversion was achieved at low temperature. It was demonstrated that the higher dispersion of the CeO2 support, the better the performance of the Pt/CeO2 catalysts. The catalysts were characterized by XRD, TEM, HRTEM, EDX, BET, and XPS. The homogeneous incorporation of 2-4 nm Pt nanoparticles into the interparticle distance of the CeO2 nanopowders was demonstrated. The advantage of the sonochemical method for catalyst preparation, in comparison with the traditional incipient wetness impregnation, was explained as the result of the homogeneity and better dispersion of the active metal phase obtained by ultrasound irradiation.
RESUMEN
Resistance to leaching and re-usability are characteristic of the novel heterogeneous Lewis acid catalyst that was prepared by anchoring tin(IV) chloride on silica grafted with tetraalkylammonium or pyridinium chloride groups. The catalyst displays high activity and selectivity in the synthesis of 3-methyl-3-buten-1-ol by the Prins condensation of isobutene with formaldehyde [Eq. (1)].