Tunable covalent benzo-heterocyclic rings constructed using two-dimensional conjugated polymers for visible-light-driven water splitting.

Developing highly efficient, stable, and cost-effective two-dimensional (2D) conjugated polymers (CPs) for overall water splitting (OWS) is critical for producing clean and renewable hydrogen energy, yet it remains a great challenge. Here, we designed eight 2D CPs through the topological assembly of diacetylene and benzene-derived molecular linkers that can offer active sites for hydrogen and oxygen evolution reactions, and explored their structural, electronic, optical, and photocatalytic OWS properties by performing first-principles computations. It is shown that incorporating benzo-heterocyclic rings into CPs can significantly modulate the electronic structures of CPs and broaden the spectral absorption, suitable for visible-light-driven OWS. Remarkably, through a range of screening criteria, including stability, electronic band structures, band edge alignments, and photocatalytic activity, we found that CP-4 based on diacetylene and benzotrifuran can spontaneously trigger the OWS in a neutral environment under its own light-induced bias, eliminating the need for sacrificial agents or cocatalysts. Specifically, the HER active site is primarily located at diacetylene moieties, while the OER active site is mainly concentrated on the benzo-heterocyclic rings. Moreover, the ideal STH efficiency for OWS on CP-4 was estimated to be 13.87%, highlighting its potential as a prospective photocatalyst for large-scale industrial OWS. Our findings open a door to the rational design of novel polymer photocatalysts for OWS.

Designed Tetranuclear Iron-oxo Clusters with Redox Activity for High-Performance Lithium Storage.

Polyoxometalates (POMs) are considered as promising catalysts with unique redox activity at the molecular level for energy storage. However, eco-friendly iron-oxo clusters with special metal coordination structures have rarely been reported for Li-ion storage. Herein, three novel redox-active tetranuclear iron-oxo clusters have been synthesized using the solvothermal method with different ratios of Fe3+ and SO4 2- . Further, they can serve as anode materials for Li-ion batteries. Among them, cluster H6 [Fe4 O2 (H2 O)2 (SO4 )7 ]⋅H2 O, the stable structure extended by SO4 2- with a unique 1D pore, displays a specific discharge capacity of 1784 mAh g-1 at 0.2 C and good cycle performance (at 0.2 C and 4 C). This is the first instance of inorganic iron-oxo clusters being used for Li-ion storage. Our findings present a new molecular model system with a well-defined structure and offer new design concepts for the practical application of studying the multi-electron redox activity of iron-oxo clusters.

Molecular Iron Oxide Clusters Boost the Oxygen Reduction Reaction of Platinum Electrocatalysts at Near-Neutral pH.

The oxygen reduction reaction (ORR) is a key energy conversion process, which is critical for the efficient operation of fuel cells and metal-air batteries. Here, we report the significant enhancement of the ORR-performance of commercial platinum-on-carbon electrocatalysts when operated in aqueous electrolyte solutions (pH 5.6), containing the polyoxoanion [Fe28 (µ3 -O)8 (L-(-)-tart)16 (CH3 COO)24 ]20- . Mechanistic studies provide initial insights into the performance-improving role of the iron oxide cluster during ORR. Technological deployment of the system is demonstrated by incorporation into a direct formate microfluidic fuel cell (DFMFC), where major performance increases are observed when compared with reference electrolytes. The study provides the first examples of iron oxide clusters in electrochemical energy conversion and storage.

Enhanced Cuprophilic Interactions in Crystalline Catalysts Facilitate the Highly Selective Electroreduction of CO2 to CH4.

Cu(I)-based catalysts have proven to play an important role in the formation of specific hydrocarbon products from electrochemical carbon dioxide reduction reaction (CO2RR). However, it is difficult to understand the effect of intrinsic cuprophilic interactions inside the Cu(I) catalysts on the electrocatalytic mechanism and performance. Herein, two stable copper(I)-based coordination polymer (NNU-32 and NNU-33(S)) catalysts are synthesized and integrated into a CO2 flow cell electrolyzer, which exhibited very high selectivity for electrocatalytic CO2-to-CH4 conversion due to clearly inherent intramolecular cuprophilic interactions. Substitution of hydroxyl radicals for sulfate radicals during the electrocatalytic process results in an in situ dynamic crystal structure transition from NNU-33(S) to NNU-33(H), which further strengthens the cuprophilic interactions inside the catalyst structure. Consequently, NNU-33(H) with enhanced cuprophilic interactions shows an outstanding product (CH4) selectivity of 82% at -0.9 V (vs reversible hydrogen electrode, j = 391 mA cm-2), which represents the best crystalline catalyst for electrocatalytic CO2-to-CH4 conversion to date. Moreover, the detailed DFT calculations also prove that the cuprophilic interactions can effectively facilitate the electroreduction of CO2 to CH4 by decreasing the Gibbs free energy change of potential determining step (*H2COOH → *OCH2). Significantly, this work first explored the effect of intrinsic cuprophilic interactions of Cu(I)-based catalysts on the electrocatalytic performance of CO2RR and provides an important case study for designing more stable and efficient crystalline catalysts to reduce CO2 to high-value carbon products.

Semiconductor/Covalent-Organic-Framework Z-Scheme Heterojunctions for Artificial Photosynthesis.

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic-inorganic Z-scheme heterojunctions for artificial photosynthesis is presented. A series of COF-semiconductor Z-scheme photocatalysts combining water-oxidation semiconductors (TiO2 , Bi2 WO6 , and α-Fe2 O3 ) with CO2 reduction COFs (COF-316/318) was synthesized and exhibited high photocatalytic CO2 -to-CO conversion efficiencies (up to 69.67 µmol g-1 h-1 ), with H2 O as the electron donor in the gas-solid CO2 reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic-semiconductor systems utilizing the Z-scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor-to-COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO2 reduction and holes in the semiconductor for H2 O oxidation, thus mimicking natural photosynthesis.

Pt-O bond as an active site superior to Pt0 in hydrogen evolution reaction.

The oxidized platinum (Pt) can exhibit better electrocatalytic activity than metallic Pt0 in the hydrogen evolution reaction (HER), which has aroused great interest in exploring the role of oxygen in Pt-based catalysts. Herein, we select two structurally well-defined polyoxometalates Na5[H3Pt(IV)W6O24] (PtW6O24) and Na3K5[Pt(II)2(W5O18)2] (Pt2(W5O18)2) as the platinum oxide model to investigate the HER performance. Electrocatalytic experiments show the mass activities of PtW6O24/C and Pt2(W5O18)2/C are 20.175 A mg-1 and 10.976 A mg-1 at 77 mV, respectively, which are better than that of commercial 20% Pt/C (0.398 A mg-1). The in situ synchrotron radiation experiments and DFT calculations suggest that the elongated Pt-O bond acts as the active site during the HER process, which can accelerate the coupling of proton and electron and the rapid release of H2. This work complements the knowledge boundary of Pt-based electrocatalytic HER, and suggests another way to update the state-of-the-art electrocatalyst.

Polyoxometalate-based electron transfer modulation for efficient electrocatalytic carbon dioxide reduction.

The electrocatalytic carbon dioxide (CO2) reduction reaction (CO2RR) involves a variety of electron transfer pathways, resulting in poor reaction selectivity, limiting its use to meet future energy requirements. Polyoxometalates (POMs) can both store and release multiple electrons in the electrochemical process, and this is expected to be an ideal "electron switch" to match with catalytically active species, realize electron transfer modulation and promote the activity and selectivity of the electrocatalytic CO2RR. Herein, we report a series of new POM-based manganese-carbonyl (MnL) composite CO2 reduction electrocatalysts, whereby SiW12-MnL exhibits the most remarkable activity and selectivity for CO2RR to CO, resulting in an increase in the faradaic efficiency (FE) from 65% (MnL) to a record-value of 95% in aqueous electrolyte. A series of control electrochemical experiments, photoluminescence spectroscopy (PL), transient photovoltage (TPV) experiments, and density functional theory (DFT) calculations revealed that POMs act as electronic regulators to control the electron transfer process from POM to MnL units during the electrochemical reaction, enhancing the selectivity of the CO2RR to CO and depressing the competitive hydrogen evolution reaction (HER). This work demonstrates the significance of electron transfer modulation in the CO2RR and suggests a new idea for the design of efficient electrocatalysts towards CO2RR.

Real-time molecular scale observation of crystal formation.

How molecules in solution form crystal nuclei, which then grow into large crystals, is a poorly understood phenomenon. The classical mechanism of homogeneous crystal nucleation proceeds via the spontaneous random aggregation of species from liquid or solution. However, a non-classical mechanism suggests the formation of an amorphous dense phase that reorders to form stable crystal nuclei. So far it has remained an experimental challenge to observe the formation of crystal nuclei from five to thirty molecules. Here, using polyoxometallates, we show that the formation of small crystal nuclei is observable by cryogenic transmission electron microscopy. We observe both classical and non-classical nucleation processes, depending on the identity of the cation present. The experiments verify theoretical studies that suggest non-classical nucleation is the lower of the two energy pathways. The arrangement in just a seven-molecule proto-crystal matches the order found by X-ray diffraction of a single bulk crystal, which demonstrates that the same structure was formed in each case.

Bonding interactions between sulfur dioxide (SO2) and mono-ruthenium(II)-substituted Keggin-type polyoxometalates: electronic structures of ruthenium-SO2 adducts.

Density functional theory (DFT) calculations and natural bond orbital (NBO) analysis were carried out to investigate the electronic structures and bonding features between the ruthenium(ii) atom and the SO2 molecule in two ruthenium-sulfur dioxide (SO2) adducts, trans-Ru(NH3)4(SO2)Cl(+) and [{SiW11O39}Ru(II)(SO2)](6-). In addition, the bonding interactions between SO2 and the metal-ruthenium fragment were determined by binding energy (ΔEabs) calculation and electronic structures. The results indicate that the η(1)-S-planar model in both trans-Ru(NH3)4(SO2)Cl(+) and [{SiW11O39}Ru(II)(SO2)](6-) are more favorable. NBO analysis of the bonding interaction between ruthenium and sulfur centers in the [{SiW11O39}Ru(II)(SO2)](6-) complex shows that it possesses a σ and a π bond. It predicts that the polyoxometalate [SiW11O39Ru](6-) can serve as a potential adsorbent for the SO2 molecule because of the strong Ru-S bond relative to Ru(NH3)4Cl(+).

DFT characterization on the mechanism of water splitting catalyzed by single-Ru-substituted polyoxometalates.

Water oxidation is a key half reaction in the energy conversion scheme. The reaction mechanism for the oxidation of H2O to O2 catalyzed by single-Ru-substituted polyoxometalates, [Ru(III)(H2O)XW11O39](n-) (X = Si(IV), Ge(IV)), was investigated by means of density functional calculations. The electronic structure of the pre-activation intermediates indicates that the aqua ligand is prone to accommodate the proton coupled electron transfer (PCET) process to achieve the active group [Ru(V)=Oa], and the high valent oxo-ruthenium(V) species are responsible for the O-O forming event. Three possible proton acceptors were designed for the rate-determining step (Ob, Oa, and H2O), the calculated results support that the bridge Ob atom of the polytungstate ligand will act as the most favorable proton acceptor in the O-O bond formation, with an energy barrier of 28.43 kcal mol(-1). A detailed information of the peroxidic intermediates in the oxidation process was also characterized, both the peroxo-species [Ru(IV)(OO)SiW11O39](6-) and [Ru(V)(OO)SiW11O39](5-) show the six-coordinate isomer with an open terminal geometry is more favorable than the close seven-coordinate ones. In addition, the replacement of the heteroatom in XO4(n-) can effectively tune the catalytic activity of polyoxometalates, in the order of Ge(IV) > Si(IV).

Control of interpenetration in S-containing metal-organic frameworks for selective separation of transition metal ions.

Two S-containing MOFs, interpenetrating and non-interpenetrating , were synthesized by altering solvent size. The nanoporous reveals high selective adsorption for Cu(2+) ions and has been applied as a chromatographic column for separating transition metal ions for the first time.

The self-assembly mechanism of the Lindqvist anion [W6O19]2- in aqueous solution: a density functional theory study.

The formation mechanism is always a fundamental and confused issue for polyoxometalate chemistry. Two formation mechanisms (M1 and M2) of the Lindqvist anion [W(6)O(19)](2-) have been adopted to investigate it's self-assembly reaction pathways at a density functional theory (DFT) level. The potential energy surfaces reveal that both the mechanisms are thermodynamically favorable and overall barrierless at room temperature, but M2 is slightly dominant to M1. The formation of the pentanuclear species [W(5)O(16)](2-) and [W(5)O(15)(OH)](-) are recognized as the rate-determining steps in the whole assembly polymerization processes. These two steps involve the highest energy barriers with 30.48 kcal mol(-1) and 28.90 kcal mol(-1), respectively, for M1 and M2. [W(4)O(13)](2-) and [W(4)O(12)(OH)](-) are proved to be the most stable building blocks. In addition, DFT results reveal that the formation of [W(3)O(10)](2-) experiences a lower barrier along the chain channel.