Simulating whole-body vibration for neonatal patients on a tire-coupled road simulator.

Exposure to excessive whole-body vibration is linked to health issues and may result in increased rates of mortality and morbidity in infants. Newborn infants requiring specialized treatment at neonatal intensive care units often require transportation by road ambulance to specialized care centers, exposing the infants to potentially harmful vibration and noise. A standardized Neonatal Patient Transport System (NPTS) has been deployed in Ontario, Canada, that provides life saving equipment to patients and safe operation for the clinical care staff. However, there is evidence that suggests patients may experience a higher amplitude of vibration at certain frequencies when compared with the vehicle vibration. In a multi-year collaborative project, we seek to create a standardized test procedure to evaluate the levels of vibration and the effectiveness of mitigation strategies. Previous studies have looked at laboratory vibration testing of a transport system or transport incubator and were limited to single degree of freedom excitation, neglecting the combined effects of rotational motion. This study considers laboratory testing of a full vehicle and patient transport system on an MTS Model 320 Tire-Coupled Road Simulator. The simulation of road profiles and discrete events on a tire-coupled road simulator allows for the evaluation of the vibration levels of the transport system and the exploration of mitigation strategies in a controlled setting. The tire-coupled simulator can excite six degrees-of-freedom motion of the transport system for vibration evaluation in three orthogonal directions including the contributions of the three rotational degrees of freedom. The vibration data measured on the transport system during the tire-coupled testing are compared to corresponding road test data to assess the accuracy of the vibration environment replication. Three runs of the same drive file were conducted during the laboratory testing, allowing the identification of anomalies and evaluation of the repeatability. The tire-coupled full vehicle testing revealed a high level of accuracy in re-creating the road sections and synthesized random profiles. The simulation of high amplitude discrete events, such as speed hump traverses, were highly repeatable, yet yielded less accurate results with respect to the peak amplitudes at the patient. The resulting accelerations collected at the input to the manikin (sensor located under the mattress) matched well between the real-world and road simulator. The sensors used during testing included series 3741B uni-axial and series 356A01 tri-axial accelerometers by PCB Piezotronics. These results indicate a tire-coupled road simulator can be used to accurately evaluate vibration levels and assess the benefits of future mitigation strategies in a controlled setting with a high level of repeatability.

Ribosome-associated vesicles: A dynamic subcompartment of the endoplasmic reticulum in secretory cells.

The endoplasmic reticulum (ER) is a highly dynamic network of membranes. Here, we combine live-cell microscopy with in situ cryo-electron tomography to directly visualize ER dynamics in several secretory cell types including pancreatic ß-cells and neurons under near-native conditions. Using these imaging approaches, we identify a novel, mobile form of ER, ribosome-associated vesicles (RAVs), found primarily in the cell periphery, which is conserved across different cell types and species. We show that RAVs exist as distinct, highly dynamic structures separate from the intact ER reticular architecture that interact with mitochondria via direct intermembrane contacts. These findings describe a new ER subcompartment within cells.

Functional Site Discovery From Incomplete Training Data: A Case Study With Nucleic Acid-Binding Proteins.

Function annotation efforts provide a foundation to our understanding of cellular processes and the functioning of the living cell. This motivates high-throughput computational methods to characterize new protein members of a particular function. Research work has focused on discriminative machine-learning methods, which promise to make efficient, de novo predictions of protein function. Furthermore, available function annotation exists predominantly for individual proteins rather than residues of which only a subset is necessary for the conveyance of a particular function. This limits discriminative approaches to predicting functions for which there is sufficient residue-level annotation, e.g., identification of DNA-binding proteins or where an excellent global representation can be divined. Complete understanding of the various functions of proteins requires discovery and functional annotation at the residue level. Herein, we cast this problem into the setting of multiple-instance learning, which only requires knowledge of the protein's function yet identifies functionally relevant residues and need not rely on homology. We developed a new multiple-instance leaning algorithm derived from AdaBoost and benchmarked this algorithm against two well-studied protein function prediction tasks: annotating proteins that bind DNA and RNA. This algorithm outperforms certain previous approaches in annotating protein function while identifying functionally relevant residues involved in binding both DNA and RNA, and on one protein-DNA benchmark, it achieves near perfect classification.

Activation of GTP hydrolysis in mRNA-tRNA translocation by elongation factor G.

During protein synthesis, elongation of the polypeptide chain by each amino acid is followed by a translocation step in which mRNA and transfer RNA (tRNA) are advanced by one codon. This crucial step is catalyzed by elongation factor G (EF-G), a guanosine triphosphatase (GTPase), and accompanied by a rotation between the two ribosomal subunits. A mutant of EF-G, H91A, renders the factor impaired in guanosine triphosphate (GTP) hydrolysis and thereby stabilizes it on the ribosome. We use cryogenic electron microscopy (cryo-EM) at near-atomic resolution to investigate two complexes formed by EF-G H91A in its GTP state with the ribosome, distinguished by the presence or absence of the intersubunit rotation. Comparison of these two structures argues in favor of a direct role of the conserved histidine in the switch II loop of EF-G in GTPase activation, and explains why GTP hydrolysis cannot proceed with EF-G bound to the unrotated form of the ribosome.

Trajectories of the ribosome as a Brownian nanomachine.

A Brownian machine, a tiny device buffeted by the random motions of molecules in the environment, is capable of exploiting these thermal motions for many of the conformational changes in its work cycle. Such machines are now thought to be ubiquitous, with the ribosome, a molecular machine responsible for protein synthesis, increasingly regarded as prototypical. Here we present a new analytical approach capable of determining the free-energy landscape and the continuous trajectories of molecular machines from a large number of snapshots obtained by cryogenic electron microscopy. We demonstrate this approach in the context of experimental cryogenic electron microscope images of a large ensemble of nontranslating ribosomes purified from yeast cells. The free-energy landscape is seen to contain a closed path of low energy, along which the ribosome exhibits conformational changes known to be associated with the elongation cycle. Our approach allows model-free quantitative analysis of the degrees of freedom and the energy landscape underlying continuous conformational changes in nanomachines, including those important for biological function.

Automated particle picking for low-contrast macromolecules in cryo-electron microscopy.

Cryo-electron microscopy is an increasingly popular tool for studying the structure and dynamics of biological macromolecules at high resolution. A crucial step in automating single-particle reconstruction of a biological sample is the selection of particle images from a micrograph. We present a novel algorithm for selecting particle images in low-contrast conditions; it proves more effective than the human eye on close-to-focus micrographs, yielding improved or comparable resolution in reconstructions of two macromolecular complexes.

Hepatitis-C-virus-like internal ribosome entry sites displace eIF3 to gain access to the 40S subunit.

Hepatitis C virus (HCV) and classical swine fever virus (CSFV) messenger RNAs contain related (HCV-like) internal ribosome entry sites (IRESs) that promote 5'-end independent initiation of translation, requiring only a subset of the eukaryotic initiation factors (eIFs) needed for canonical initiation on cellular mRNAs. Initiation on HCV-like IRESs relies on their specific interaction with the 40S subunit, which places the initiation codon into the P site, where it directly base-pairs with eIF2-bound initiator methionyl transfer RNA to form a 48S initiation complex. However, all HCV-like IRESs also specifically interact with eIF3 (refs 2, 5-7, 9-12), but the role of this interaction in IRES-mediated initiation has remained unknown. During canonical initiation, eIF3 binds to the 40S subunit as a component of the 43S pre-initiation complex, and comparison of the ribosomal positions of eIF3 and the HCV IRES revealed that they overlap, so that their rearrangement would be required for formation of ribosomal complexes containing both components. Here we present a cryo-electron microscopy reconstruction of a 40S ribosomal complex containing eIF3 and the CSFV IRES. Remarkably, although the position and interactions of the CSFV IRES with the 40S subunit in this complex are similar to those of the HCV IRES in the 40S-IRES binary complex, eIF3 is completely displaced from its ribosomal position in the 43S complex, and instead interacts through its ribosome-binding surface exclusively with the apical region of domain III of the IRES. Our results suggest a role for the specific interaction of HCV-like IRESs with eIF3 in preventing ribosomal association of eIF3, which could serve two purposes: relieving the competition between the IRES and eIF3 for a common binding site on the 40S subunit, and reducing formation of 43S complexes, thereby favouring translation of viral mRNAs.

Structure of the mammalian ribosomal 43S preinitiation complex bound to the scanning factor DHX29.

Eukaryotic translation initiation begins with assembly of a 43S preinitiation complex. First, methionylated initiator methionine transfer RNA (Met-tRNAi(Met)), eukaryotic initiation factor (eIF) 2, and guanosine triphosphate form a ternary complex (TC). The TC, eIF3, eIF1, and eIF1A cooperatively bind to the 40S subunit, yielding the 43S preinitiation complex, which is ready to attach to messenger RNA (mRNA) and start scanning to the initiation codon. Scanning on structured mRNAs additionally requires DHX29, a DExH-box protein that also binds directly to the 40S subunit. Here, we present a cryo-electron microscopy structure of the mammalian DHX29-bound 43S complex at 11.6 Å resolution. It reveals that eIF2 interacts with the 40S subunit via its α subunit and supports Met-tRNAi(Met) in an unexpected P/I orientation (eP/I). The structural core of eIF3 resides on the back of the 40S subunit, establishing two principal points of contact, whereas DHX29 binds around helix 16. The structure provides insights into eukaryote-specific aspects of translation, including the mechanism of action of DHX29.

Affinity grid-based cryo-EM of PKC binding to RACK1 on the ribosome.

Affinity grids (AG) are specialized EM grids that bind macromolecular complexes containing tagged proteins to obtain maximum occupancy for structural analysis through single-particle EM. In this study, utilizing AG, we show that His-tagged activated PKC ßII binds to the small ribosomal subunit (40S). We reconstructed a cryo-EM map which shows that PKC ßII interacts with RACK1, a seven-bladed ß-propeller protein present on the 40S and binds in two different regions close to blades 3 and 4 of RACK1. This study is a first step in understanding the molecular framework of PKC ßII/RACK1 interaction and its role in translation.

A structure-based protocol for learning the family-specific mechanisms of membrane-binding domains.

MOTIVATION: Peripheral membrane-targeting domain (MTD) families, such as C1-, C2- and PH domains, play a key role in signal transduction and membrane trafficking by dynamically translocating their parent proteins to specific plasma membranes when changes in lipid composition occur. It is, however, difficult to determine the subset of domains within families displaying this property, as sequence motifs signifying the membrane binding properties are not well defined. For this reason, procedures based on sequence similarity alone are often insufficient in computational identification of MTDs within families (yielding less than 65% accuracy even with a sequence identity of 70%). RESULTS: We present a machine learning protocol for determining membrane-targeting properties achieving 85-90% accuracy in separating binding and non-binding domains within families. Our model is based on features from both sequence and structure, thereby incorporation statistics obtained from the entire domain family and domain-specific physical quantities such as surface electrostatics. In addition, by using the enriched rules in alternating decision tree classifiers, we are able to determine the meaning of the assigned function labels in terms of biological mechanisms. CONCLUSIONS: The high accuracy of the learned models and good agreement between the rules discovered using the ADtree classifier and mechanisms reported in the literature reflect the value of machine learning protocols in both prediction and biological knowledge discovery. Our protocol can thus potentially be used as a general function annotation and knowledge mining tool for other protein domains. AVAILABILITY: metador.bioengr.uic.edu CONTACT: huilu@uic.edu.

Reference-free particle selection enhanced with semi-supervised machine learning for cryo-electron microscopy.

Reference-based methods have dominated the approaches to the particle selection problem, proving fast, and accurate on even the most challenging micrographs. A reference volume, however, is not always available and compiling a set of reference projections from the micrographs themselves requires significant effort to attain the same level of accuracy. We propose a reference-free method to quickly extract particles from the micrograph. The method is augmented with a new semi-supervised machine-learning algorithm to accurately discriminate particles from contaminants and noise.

A clarification of the terms used in comparing semi-automated particle selection algorithms in cryo-EM.

Many cyro-EM datasets are heterogeneous stemming from molecules undergoing conformational changes. The need to characterize each of the substrates with sufficient resolution entails a large increase in the data flow and motivates the development of more effective automated particle selection algorithms. Concepts and procedures from the machine-learning field are increasingly employed toward this end. However, a review of recent literature has revealed a discrepancy in terminology of the performance scores used to compare particle selection algorithms, and this has subsequently led to ambiguities in the meaning of claimed performance. In an attempt to curtail the perpetuation of this confusion and to disentangle past mistakes, we review the performance of published particle selection efforts with a set of explicitly defined performance scores using the terminology established and accepted within the field of machine learning.

NAPS: a residue-level nucleic acid-binding prediction server.

Nucleic acid-binding proteins are involved in a great number of cellular processes. Understanding the mechanisms underlying these proteins first requires the identification of specific residues involved in nucleic acid binding. Prediction of NA-binding residues can provide practical assistance in the functional annotation of NA-binding proteins. Predictions can also be used to expedite mutagenesis experiments, guiding researchers to the correct binding residues in these proteins. Here, we present a method for the identification of amino acid residues involved in DNA- and RNA-binding using sequence-based attributes. The method used in this work combines the C4.5 algorithm with bootstrap aggregation and cost-sensitive learning. Our DNA-binding model achieved 79.1% accuracy, while the RNA-binding model reached an accuracy of 73.2%. The NAPS web server is freely available at http://proteomics.bioengr.uic.edu/NAPS.

Boosting the prediction and understanding of DNA-binding domains from sequence.

DNA-binding proteins perform vital functions related to transcription, repair and replication. We have developed a new sequence-based machine learning protocol to identify DNA-binding proteins. We compare our method with an extensive benchmark of previously published structure-based machine learning methods as well as a standard sequence alignment technique, BLAST. Furthermore, we elucidate important feature interactions found in a learned model and analyze how specific rules capture general mechanisms that extend across DNA-binding motifs. This analysis is carried out using the malibu machine learning workbench available at http://proteomics.bioengr.uic.edu/malibu and the corresponding data sets and features are available at http://proteomics.bioengr.uic.edu/dna.

Mechanical signaling on the single protein level studied using steered molecular dynamics.

Efficient communication between the cell and its external environment is of the utmost importance to the function of multicellular organisms. While signaling events can be generally characterized as information exchange by means of controlled energy conversion, research efforts have hitherto mainly been concerned with mechanisms involving chemical and electrical energy transfer. Here, we review recent computational efforts addressing the function of mechanical force in signal transduction. Specifically, we focus on the role of steered molecular dynamics (SMD) simulations in providing details at the atomic level on a group of protein domains, which play a fundamental role in signal exchange by responding properly to mechanical strain. We start by giving a brief introduction to the SMD technique and general properties of mechanically stable protein folds, followed by specific examples illustrating three general regimes of signal transfer utilizing mechanical energy: purely mechanical, mechanical to chemical, and chemical to mechanical. Whenever possible the physiological importance of the example at hand is stressed to highlight the diversity of the processes in which mechanical signaling plays a key role. We also provide an overview of future challenges and perspectives for this rapidly developing field.

Mining knowledge for the methylation status of CpG islands using alternating decision trees.

CpG island (CpGI) methylation is an epigenetic modification that occurs in eukaryotes and is based on the addition of a methyl group to the number 5 carbon of the pyrimidine ring of cytosine. When methylation of a CpGI occurs, the associated gene (if any) is not expressed [1]. Aberrant methylation is thought to be a causative agent in disease [2] and drug sensitivity [3], [4]. In this work, we have predicted the methylation status of CpGIs in human chromosome 21 using sequence patterns. These patterns showed a significantly different distribution between methylated and unmethylated islands in a previous work [5]. Using C4.5 with bagging and cost-sensitive learning, we achieved 85.6% accuracy, 82.8% sensitivity, and 86.4% specificity.We then constructed 1000 alternating decision trees using a bootstrapping method and analyzed the nodes that were conserved between the trees. This allowed us to find specific combinations of sequence patterns that distinguished between methylated and unmethylated CpGIs. Analysis of these characteristics offers certain insight into the conditions that permit or prevent methylation.

Intelligible machine learning with malibu.

malibu is an open-source machine learning work-bench developed in C/C++ for high-performance real-world applications, namely bioinformatics and medical informatics. It leverages third-party machine learning implementations for more robust bug-free software. This workbench handles several well-studied supervised machine learning problems including classification, regression, importance-weighted classification and multiple-instance learning. The malibu interface was designed to create reproducible experiments ideally run in a remote and/or command line environment. The software can be found at: http://proteomics.bioengr. uic.edu/malibu/index.html.

Learning to translate sequence and structure to function: identifying DNA binding and membrane binding proteins.

A protein's function depends in a large part on interactions with other molecules. With an increasing number of protein structures becoming available every year, a corresponding structural annotation approach identifying such interactions grows more expedient. At the same time, machine learning has gained popularity in bioinformatics providing robust annotation of genes and proteins without sequence homology. Here we have developed a general machine learning protocol to identify proteins that bind DNA and membrane. In general, there is no theory or even rule of thumb to pick the best machine learning algorithm. Thus, a systematic comparison of several classification algorithms known to perform well is investigated. Indeed, the boosted tree classifier is found to give the best performance, achieving 93% and 88% accuracy to discriminate non-homologous proteins that bind membrane and DNA, respectively, significantly outperforming all previously published works. We also attempted to address the importance of the attributes in function prediction and the relationships between relevant attributes. A graphical model based on boosted trees is applied to study the important features in discriminating DNA-binding proteins. In summary, the current protocol identified physical features important in DNA and membrane binding, rather than annotating function through sequence similarity.

Finding new structural and sequence attributes to predict possible disease association of single amino acid polymorphism (SAP).

MOTIVATION: The rapid accumulation of single amino acid polymorphisms (SAPs), also known as non-synonymous single nucleotide polymorphisms (nsSNPs), brings the opportunities and needs to understand and predict their disease association. Currently published attributes are limited, the detailed mechanisms governing the disease association of a SAP remain unclear and thus, further investigation of new attributes and improvement of the prediction are desired. RESULTS: A SAP dataset was compiled from the Swiss-Prot variant pages. We extracted and demonstrated the effectiveness of several new biologically informative attributes including the structural neighbor profiles that describe the SAP's microenvironment, nearby functional sites that measure the structure-based and sequence-based distances between the SAP site and its nearby functional sites, aggregation properties that measure the likelihood of protein aggregation and disordered regions that consider whether the SAP is located in structurally disordered regions. The new attributes provided insights into the mechanisms of the disease association of SAPs. We built a support vector machines (SVMs) classifier employing a carefully selected set of new and previously published attributes. Through a strict protein-level 5-fold cross-validation, we attained an overall accuracy of 82.61%, and an MCC of 0.60. Moreover, a web server was developed to provide a user-friendly interface for biologists. AVAILABILITY: The web server is available at http://sapred.cbi.pku.edu.cn/

Fatal agranulocytosis: the use of olanzapine in a patient with schizophrenia and myelodysplasia.

Neutropenia and agranulocytosis are risks known to occur with phenothiazines and clozapine. The mechanisms responsible for these conditions currently remain unclear. To our knowledge, no case of fatal agranulocytosis as a result of olanzapine treatment was reported in the literature. Thus any case of severe neutropenia occurring in a patient receiving olanzapine is alarming to clinicians. First, a review of the literature produced 41 anecdotic cases of neutropenia or agranulocytosis during treatment with olanzapine (Zyprexa) reported in a total of 24 publications. Second, we report a case of neutropenia, which proved to be fatal in a schizophrenia patient receiving olanzapine and thiazide. The cause of the death was Myelodysplastic syndrome. There is not enough evidence to prove the involvement of either olanzapine or hydrochlorothiazide or the interaction between them in this patient's myelodysplasia. Bone marrow cytogenetic study confirmed the deletion of the long arm of chromosome 11, as reported in myeloid leukemia. If this patient would have died suddenly without the laboratory investigations that lead to the diagnosis of myeloblastic leukemia, the cause would have been probably and wrongfully allotted to treatment with olanzapine.