Picojoule-level supercontinuum generation in thin-film lithium niobate on sapphire.

We demonstrate ultraviolet-to-mid-infrared supercontinuum generation (SCG) inside thin-film lithium niobate (TFLN) on sapphire nanowaveguides. This platform combines wavelength-scale confinement and quasi-phasematched nonlinear interactions with a broad transparency window extending from 350 to 4500 nm. Our approach relies on group-velocity-matched second-harmonic generation, which uses an interplay between saturation and a small phase-mismatch to generate a spectrally broadened fundamental and second harmonic using only a few picojoules of in-coupled fundamental pulse energies. As the on-chip pulse energy is increased to tens of picojoules, these nanowaveguides generate harmonics up to the fifth order by a cascade of sum-frequency mixing processes. For in-coupled pulse energies in excess of 25 picojoules, these harmonics merge together to form a supercontinuum spanning 360-2660 nm. We use the overlap between the first two harmonic spectra to detect f-2f beatnotes of the driving laser directly at the waveguide output, which verifies the coherence of the generated harmonics. These results establish TFLN-on-sapphire as a viable platform for generating ultra-broadband coherent light spanning from the ultraviolet to mid-infrared spectral regions.

Integrated frequency-modulated optical parametric oscillator.

Optical frequency combs have revolutionized precision measurement, time-keeping and molecular spectroscopy1-7. A substantial effort has developed around 'microcombs': integrating comb-generating technologies into compact photonic platforms5,7-9. Current approaches for generating these microcombs involve either the electro-optic10 or Kerr mechanisms11. Despite rapid progress, maintaining high efficiency and wide bandwidth remains challenging. Here we introduce a previously unknown class of microcomb-an integrated device that combines electro-optics and parametric amplification to yield a frequency-modulated optical parametric oscillator (FM-OPO). In contrast to the other solutions, it does not form pulses but maintains operational simplicity and highly efficient pump power use with an output resembling a frequency-modulated laser12. We outline the working principles of our device and demonstrate it by fabricating the complete optical system in thin-film lithium niobate. We measure pump-to-comb internal conversion efficiency exceeding 93% (34% out-coupled) over a nearly flat-top spectral distribution spanning about 200 modes (over 1 THz). Compared with an electro-optic comb, the cavity dispersion rather than loss determines the FM-OPO bandwidth, enabling broadband combs with a smaller radio-frequency modulation power. The FM-OPO microcomb offers robust operational dynamics, high efficiency and broad bandwidth, promising compact precision tools for metrology, spectroscopy, telecommunications, sensing and computing.

Lithium niobate photonics: Unlocking the electromagnetic spectrum.

Lithium niobate (LN), first synthesized 70 years ago, has been widely used in diverse applications ranging from communications to quantum optics. These high-volume commercial applications have provided the economic means to establish a mature manufacturing and processing industry for high-quality LN crystals and wafers. Breakthrough science demonstrations to commercial products have been achieved owing to the ability of LN to generate and manipulate electromagnetic waves across a broad spectrum, from microwave to ultraviolet frequencies. Here, we provide a high-level Review of the history of LN as an optical material, its different photonic platforms, engineering concepts, spectral coverage, and essential applications before providing an outlook for the future of LN.

Ultra-broadband mid-infrared generation in dispersion-engineered thin-film lithium niobate.

Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between a fixed 1-µm pump and a tunable telecom source in uniformly-poled TFLN-on-sapphire by harnessing the dispersion-engineering available in tightly-confining waveguides. We show a simultaneous 1-2 order-of-magnitude improvement in conversion efficiency and ∼5-fold enhancement of operating bandwidth for mid-infrared generation when compared to equal-length conventional lithium niobate waveguides. We also examine the effects of mid-infrared loss from surface-adsorbed water on the performance of these devices.

Ultra-low-power second-order nonlinear optics on a chip.

Second-order nonlinear optical processes convert light from one wavelength to another and generate quantum entanglement. Creating chip-scale devices to efficiently control these interactions greatly increases the reach of photonics. Existing silicon-based photonic circuits utilize the third-order optical nonlinearity, but an analogous integrated platform for second-order nonlinear optics remains an outstanding challenge. Here we demonstrate efficient frequency doubling and parametric oscillation with a threshold of tens of micro-watts in an integrated thin-film lithium niobate photonic circuit. We achieve degenerate and non-degenerate operation of the parametric oscillator at room temperature and tune its emission over one terahertz by varying the pump frequency by hundreds of megahertz. Finally, we observe cascaded second-order processes that result in parametric oscillation. These resonant second-order nonlinear circuits will form a crucial part of the emerging nonlinear and quantum photonics platforms.

Spectrally separable photon-pair generation in dispersion engineered thin-film lithium niobate.

Existing nonlinear-optic implementations of pure, unfiltered heralded single-photon sources do not offer the scalability required for densely integrated quantum networks. Additionally, lithium niobate has hitherto been unsuitable for such use due to its material dispersion. We engineer the dispersion and the quasi-phasematching conditions of a waveguide in the rapidly emerging thin-film lithium niobate platform to generate spectrally separable photon pairs in the telecommunications band. Such photon pairs can be used as spectrally pure heralded single-photon sources in quantum networks. We estimate a heralded-state spectral purity of >94% based on joint spectral intensity measurements. Further, a joint spectral phase-sensitive measurement of the unheralded time-integrated second-order correlation function yields a heralded-state purity of (86±5)%.

Spectral phase transitions in optical parametric oscillators.

Driven nonlinear resonators provide a fertile ground for phenomena related to phase transitions far from equilibrium, which can open opportunities unattainable in their linear counterparts. Here, we show that optical parametric oscillators (OPOs) can undergo second-order phase transitions in the spectral domain between degenerate and non-degenerate regimes. This abrupt change in the spectral response follows a square-root dependence around the critical point, exhibiting high sensitivity to parameter variation akin to systems around an exceptional point. We experimentally demonstrate such a phase transition in a quadratic OPO. We show that the divergent susceptibility of the critical point is accompanied by spontaneous symmetry breaking and distinct phase noise properties in the two regimes, indicating the importance of a beyond nonlinear bifurcation interpretation. We also predict the occurrence of first-order spectral phase transitions in coupled OPOs. Our results on non-equilibrium spectral behaviors can be utilized for enhanced sensing, advanced computing, and quantum information processing.

Performance scaling of a 10-GHz solid-state laser enabling self-referenced CEO frequency detection without amplification.

A simple and compact straight-cavity laser oscillator incorporating a cascaded quadratic nonlinear crystal and a semiconductor saturable absorber mirror (SESAM) can deliver stable femtosecond modelocking at high pulse repetition rates >10 GHz. In this paper, we experimentally investigate the influence of intracavity dispersion, pump brightness, and cavity design on modelocking with high repetition rates, and use the resulting insights to demonstrate a 10.4-GHz straight-cavity SESAM-modelocked Yb:CALGO laser delivering 108-fs pulses with 812 mW of average output power. This result represents a record-level performance for diode-pumped femtosecond oscillators with repetition rates above 10 GHz. Using the oscillator output without any optical amplification, we demonstrate coherent octave-spanning supercontinuum generation (SCG) in a silicon nitride waveguide. Subsequent f-to-2f interferometry with a periodically poled lithium niobate waveguide enables the detection of a strong carrier-envelope offset (CEO) beat note with a 33-dB signal-to-noise ratio.

Multi-watt, broadband second-harmonic-generation in MgO:PPSLT waveguides fabricated with femtosecond laser micromachining.

We demonstrate optical waveguides fabricated in periodically poled MgO-doped stoichiometric lithium tantalate crystals using an fs-laser direct-write process. Two different waveguide architectures were developed: depressed cladding and stress-induced waveguides. Our strain-optic simulations confirmed the guiding mechanism for either case. We demonstrate designs optimized for low propagation loss (0.52 dB/cm) for both fundamental (1050 nm) and second-harmonic wavelengths (525 nm). Low-power CW second-harmonic-generation studies show normalized efficiencies comparable to that of annealed reverse-proton-exchange waveguides in lithium niobate. High-power studies demonstrate second-harmonic power levels up to 8.5 W in a single-pass configuration, using a 1-nm bandwidth CW IR fiber laser as a pump.

Experimental investigation of performance differences between coherent Ising machines and a quantum annealer.

Physical annealing systems provide heuristic approaches to solving combinatorial optimization problems. Here, we benchmark two types of annealing machines-a quantum annealer built by D-Wave Systems and measurement-feedback coherent Ising machines (CIMs) based on optical parametric oscillators-on two problem classes, the Sherrington-Kirkpatrick (SK) model and MAX-CUT. The D-Wave quantum annealer outperforms the CIMs on MAX-CUT on cubic graphs. On denser problems, however, we observe an exponential penalty for the quantum annealer [exp(-αDW N 2)] relative to CIMs [exp(-αCIM N)] for fixed anneal times, both on the SK model and on 50% edge density MAX-CUT. This leads to a several orders of magnitude time-to-solution difference for instances with over 50 vertices. An optimal-annealing time analysis is also consistent with a substantial projected performance difference. The difference in performance between the sparsely connected D-Wave machine and the fully-connected CIMs provides strong experimental support for efforts to increase the connectivity of quantum annealers.

Cascaded downconversion interface to convert single-photon-level signals at 650 nm to the telecom band.

We present a device designed for two-step downconversion of single-photon-level signals at 650 nm to the 1.5-µm band with low excess noise and low required pump power as a quantum interface between matter-qubit-based nodes and low-loss photonic channels for quantum communication networks. The required pump power for this interface is around 60% of that for a comparable conventional single-pass device, which reduces the demand on the pump laser and yields a corresponding reduction in dark counts due to inelastic pump scattering. The single-photon-level signal at 649.7 nm is downconverted to the telecom band using a fiber-coupled reverse proton exchange periodically poled lithium niobate waveguide and a 2.19-µm pump laser. By testing the device in the linear regime with a classical input, we achieved 99% depletion efficiency for each stage, corresponding to an internal quantum efficiency of 63% at the optimum pump power for the complete cascaded process.

Using temperature to reduce noise in quantum frequency conversion.

Quantum frequency conversion is important in quantum networks to interface nodes operating at different wavelengths and to enable long-distance quantum communication using telecommunications wavelengths. Unfortunately, frequency conversion in actual devices is not a noise-free process. One main source of noise is spontaneous Raman scattering, which can be reduced by lowering the device operating temperature. We explore frequency conversion of 1554 nm photons to 837 nm using a 1813 nm pump in a periodically poled lithium niobate waveguide device. By reducing the temperature from 85°C to 40°C, we show a three-fold reduction in dark count rates, which is in good agreement with theory.

Pilot-tone-based self-homodyne detection using optical nonlinear wave mixing.

An all-optical pilot-tone-based self-homodyne detection scheme using nonlinear wave mixing is experimentally demonstrated. Two scenarios are investigated using (1) multiple wavelength-division-multiplexed channels with sufficient power of the pilot tones and (2) a single channel with a low-power pilot tone. The eye diagram and bit error rate of the system are studied by tuning various parameters such as pump power, relative phase, and pilot-to-signal ratio.

Simultaneous all-optical phase noise mitigation and automatically locked homodyne reception of an incoming QPSK data signal.

Simultaneous phase noise mitigation and automatic phase/frequency-locked homodyne reception is demonstrated for a 20-32 Gbaud QPSK signal. A phase quantization function is realized to squeeze the phase noise of the signal by optical wave mixing of the signal, its third-order harmonic, and their corresponding delayed variant conjugates, converting the noisy input into a noise-mitigated signal. In a simultaneous nonlinear process, the noise-mitigated signal is automatically phase- and frequency-locked with a "local" pump laser, avoiding the need for feedback or phase/frequency tracking for homodyne detection. Open eye-diagrams are obtained for in-phase and quadrature-phase components of the signal and ∼2 dB OSNR gain is achieved at BER 10-3.

A fully programmable 100-spin coherent Ising machine with all-to-all connections.

Unconventional, special-purpose machines may aid in accelerating the solution of some of the hardest problems in computing, such as large-scale combinatorial optimizations, by exploiting different operating mechanisms than those of standard digital computers. We present a scalable optical processor with electronic feedback that can be realized at large scale with room-temperature technology. Our prototype machine is able to find exact solutions of, or sample good approximate solutions to, a variety of hard instances of Ising problems with up to 100 spins and 10,000 spin-spin connections.

Nonlinear diffusion model for annealed proton-exchanged waveguides in zirconium-doped lithium niobate.

Photorefractive-damage- (PRD) resistant zirconium-oxide-doped lithium niobate is investigated as a substrate for the realization of annealed proton-exchanged (APE) waveguides. Its advantages are a favorable distribution coefficient, PRD resistance comparable to magnesium-oxide-doped lithium niobate, and a proton-diffusion behavior resembling congruent lithium niobate. A 1D model for APE waveguides was developed based on a previous model for congruently melting lithium niobate. Evidence for a nonlinear index dependence on concentration was found.

Reconfigurable optical inter-channel interference mitigation for spectrally overlapped QPSK signals using nonlinear wave mixing in cascaded PPLN waveguides.

A reconfigurable all-optical inter-channel interference (ICI) mitigation method is proposed for an overlapped channel system that avoids the need for multi-channel detection and channel spacing estimation. The system exhibits a 0.5-dB implementation penalty compared to a single-channel baseline system. Experiments using a dual-carrier QPSK overlapped system with both 20G-baud and 25G-baud under different channel spacing conditions evaluate the performance of the method. Improved signal constellation and receiver sensitivity demonstrate the effectiveness of this approach. This results in over 4-dB OSNR of benefit when the system Q-factor reaches a forward error correction (FEC) threshold of 8.5 dB under less-than-baudrate channel spacing conditions.

Experimental demonstration of tunable homodyne detection of WDM and dual-polarization PSK channels by automatically locking the channels to a local pump laser using nonlinear mixing.

This Letter proposes a method for tunable automatically locked homodyne detection of wavelength-division multiplexing (WDM) dual-polarization (DP) phase-shift keyed (PSK) channels using nonlinear mixing. Two stages of periodically poled lithium niobate (PPLN) waveguides and an LCoS filter enable automatic phase locking of the channels to a local laser.

Phase-mismatched localized fields in A-PPLN waveguide devices.

Highly phase-mismatched nonlinear interactions can generate spatially localized optical fields that can affect the performance of nonlinear optical devices. We present a theoretical description of the generation of such spatially localized optical fields by ultrafast pulses. The effects of temporal walk-off and pump depletion are discussed, along with methods for suppression of the localized field while maintaining the performance of the nonlinear device. The model is validated by the measurement of the spatial profile of the localized field in a quasi-phase-matched (QPM) aperiodically poled lithium niobate (A-PPLN) waveguide. Finally, we fabricate and characterize A-PPLN devices with a 33% duty cycle to reduce the locally generated field by 90%.

Two-photon interference at telecom wavelengths for time-bin-encoded single photons from quantum-dot spin qubits.

Practical quantum communication between remote quantum memories rely on single photons at telecom wavelengths. Although spin-photon entanglement has been demonstrated in atomic and solid-state qubit systems, the produced single photons at short wavelengths and with polarization encoding are not suitable for long-distance communication, because they suffer from high propagation loss and depolarization in optical fibres. Establishing entanglement between remote quantum nodes would further require the photons generated from separate nodes to be indistinguishable. Here, we report the observation of correlations between a quantum-dot spin and a telecom single photon across a 2-km fibre channel based on time-bin encoding and background-free frequency downconversion. The downconverted photon at telecom wavelengths exhibits two-photon interference with another photon from an independent source, achieving a mean wavepacket overlap of greater than 0.89 despite their original wavelength mismatch (900 and 911 nm). The quantum-networking operations that we demonstrate will enable practical communication between solid-state spin qubits across long distances.