RESUMEN
We report experimental investigations of spin-to-charge current conversion and charge transfer (CT) dynamics at the interface of the graphene/WS2 van der Waals heterostructure. Pure spin current was produced by the spin precession in the microwave-driven ferromagnetic resonance of a permalloy film (Py=Ni81Fe19) and injected into the graphene/WS2 heterostructure through a spin pumping process. The observed spin-to-charge current conversion in the heterostructure is attributed to the inverse Rashba-Edelstein effect (IREE) at the graphene/WS2 interface. Interfacial CT dynamics in this heterostructure was investigated based on the framework of the core-hole clock (CHC) approach. The results obtained from spin pumping and CHC studies show that the spin-to-charge current conversion and charge transfer processes are more efficient in the graphene/WS2 heterostructure compared to isolated WS2 and graphene films. The results show that the presence of WS2 flakes improves the current conversion efficiency. These experimental results are corroborated by density functional theory (DFT) calculations, which reveal (i) Rashba spin-orbit splitting of graphene orbitals and (ii) electronic coupling between graphene and WS2 orbitals. This study provides valuable insights for optimizing the design and performance of spintronic devices.
RESUMEN
Understanding the interfacial electronic structures of organic semiconductor phthalocyanines (MePc) and graphene is essential for their practical application in various fields. In this study, we investigated the electronic structure and the tuning of the work function of free metal phthalocyanine (Pc4), cobalt phthalocyanine (CoPc), and copper phthalocyanine (CuPc) molecules deposited on a graphene monolayer using X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). We found that the functionalization of MePc molecules induces p-doping to the graphene substrate due to the charge transfer mechanism with the MePc molecule. XPS analysis shows that the electronic interaction at the interface between Pc molecules and graphene substrate mainly occurs through the pyrrole species. Comparatively, it was observed that the electronic coupling between graphene and CuPc is relatively stronger than that between CoPc and graphene. The electronic interaction of the CuPc/Gr sample principally occurs through the Cu2+ 3d states of CuPc, the molecule, and the graphene 2p π states. This electronic interaction increases the work function of the graphene substrate to 5.75 eV, 6.05 eV, and 6.12 eV after depositing the Pc4, CoPc, and CuPc molecules, respectively. These results show that the MePc/Gr samples investigated in this study can be considered promising candidates for applications requiring a high work function to increase hole injection efficiency.
RESUMEN
Thiomersal is an organomercury derivative that degrades producing thiosalicylic acid, dithiobenzoic acid and ethylmercury. It is widely used in topical pharmaceutical preparations and as preservative in vaccines and cosmetics. In this work, an electro-analytical method for thiomersal was developed using graphene quantum dots (GQDs) as a surface modifier of a glassy carbon electrode. The method rely on using square-wave voltammetry and exploring the synergistic effect between GQDs, visible radiation and the applied potential in producing very intense Hg oxidation peak during the anodic scan. A linear voltammetric response was obtained for the analyte in the concentration range from 3.0 µmol L-1 (1.2 µg mL-1) to 32 µmol L-1 (12 µg mL-1), with a detection limit of 0.9 µmol L-1 (0.34 µg mL-1). The proposed method was successfully applied for thiomersal determination in influenza vaccine.
Asunto(s)
Carbono/química , Técnicas Electroquímicas , Vacunas contra la Influenza/química , Puntos Cuánticos/química , Timerosal/análisis , Electrodos , Tamaño de la Partícula , Procesos Fotoquímicos , Propiedades de SuperficieRESUMEN
In this work a simple approach to transform MoS2 from its metallic (1T' to semiconductor 2H) character via gold nanoparticle surface decoration of a MoS2 reduced graphene oxide (rGO) nanocomposite is proposed. The possible mechanism to this phase transformation was investigated using different spectroscopy techniques, and supported by density functional theory theoretical calculations. A mixture of the 1T'- and 2H-MoS2 phases was observed from the Raman and Mo 3d high resolution x-ray photoelectron spectra analysis in the MoS2-rGO nanocomposite. After surface decoration with gold nanoparticles the concentration of the 1T' phase decreases making evident a phase transformation. According to Raman and valence band spectra analyzes, the Au nanoparticles (NPs) induce a p-type doping in MoS2-rGO nanocomposite. We proposed as a main mechanism to the MoS2 phase transformation the electron transfer from Mo 4d xy,xz,yz in 1T' phase to AuNPs conduction band. At the same time, the unoccupied electronic structure was investigated from S K-edge near edge x-ray absorption fine structure spectroscopy. Finally, the electronic coupling between unoccupied electronic states was investigated by the core hole clock approach using resonant Auger spectroscopy, showing that AuNPs affect mainly the MoS2 electronic states close to Fermi level.
RESUMEN
The determination of neomycin sulfate was made using photoluminescent amino-functionalized graphene quantum dots (obtained from hydro-exfoliation of a mixture of citric acid and glutathione). From the several ions tested, Fe3+ was the best mediator to enable an off/on photoluminescence effect used for quantification. The mediation of Fe3+ was found to be crucial as it is responsible for the photoluminescence quenching effect, due to the interaction with quantum dots surface, also having large affinity towards neomycin that removes Fe3+ from the surface of GQDs, consequently, promoting restoration of the original nanomaterial photoluminescence. Such signal restoration was proportional to the neomycin sulfate concentration added. The linearized analytical response covered three orders of magnitude (10-7 to 10-5â¯molâ¯L-1). The proposed method is an alternative to those requiring labor-intensive procedures for chemical the derivatization of neomycin (due to the lack of chromophore groups in aminoglycosides). The method was successfully tested in the analysis of rubella vaccine containing trace residues of neomycin and in pharmaceutical compositions containing neomycin sulfate after solid phase extraction using an aminoglycoside imprinted polymer to improve selectivity in determinations.
Asunto(s)
Neomicina/análisis , Puntos Cuánticos/química , Vacuna contra la Rubéola/análisis , Aminoglicósidos/química , Glutatión/química , Grafito/química , Hierro/química , Límite de Detección , Mediciones Luminiscentes , Microscopía Electrónica de Transmisión de Rastreo , Impresión Molecular , Sondas Moleculares/química , Espectroscopía de Fotoelectrones , Extracción en Fase Sólida/instrumentación , Espectrometría Raman , TemperaturaRESUMEN
The determination of kanamycin sulfate was made indirectly by measuring its effect on photoluminescent amino functionalized graphene quantum dots (GQDs-amino) associated with gold nanoparticles (AuNPs) that were produced by the reduction of AuCl4 with NaBH4 in an aqueous dispersion of GQDs-amino (obtained by the pyrolysis of citric acid and glutathione) also containing the cationic surfactant CTAB. The AuNPs-GQDs-amino-CTAB system presents a suppressed photoluminescence that is amplified in the presence of kanamycin. Under optimized experimental conditions, the photoluminescence amplification of the nanomaterial system showed a linear response as a function of kanamycin concentration, covering three orders of magnitude (10-7 to 10-5â¯molâ¯L-1). The use of solid phase extraction with a cartridge packed with aminoglycoside selective molecularly imprinted polymer ensured selectivity in determinations made on yellow-fever vaccine and veterinary pharmaceutical formulations. The analytical results were statistically similar to those obtained with an HPLC-based fluorescence method (after chemical derivatization). The proposed method is a simple, sensitive and selective approach that does not involve the use of toxic reagents employed for chemical derivatization of aminoglycoside antibiotics.
Asunto(s)
Antibacterianos/análisis , Técnicas Biosensibles/métodos , Kanamicina/análisis , Conservadores Farmacéuticos/análisis , Vacuna contra la Fiebre Amarilla/análisis , Técnicas Biosensibles/instrumentación , Oro/química , Grafito/química , Nanopartículas del Metal/química , Polímeros/química , Puntos Cuánticos/química , Sensibilidad y Especificidad , Extracción en Fase Sólida/métodos , Vacuna contra la Fiebre Amarilla/químicaRESUMEN
Two-dimensional van der Waals heterostructures are attractive candidates for optoelectronic nanodevice applications. The charge transport process in these systems has been extensively investigated, however the effect of coupling between specific electronic states on the charge transfer process is not completely established yet. Here, interfacial charge transfer (CT) in the MoS2/graphene/SiO2 heterostructure is investigated from static and dynamic points of view. Static CT in the MoS2-graphene interface was elucidated by an intensity quenching, broadening and a blueshift of the photoluminescence peaks. Atomic and electronic state-specific CT dynamics on a femtosecond timescale are characterized using a core-hole clock approach and using the S1s core-hole lifetime as an internal clock. We demonstrate that the femtosecond electron transfer pathway in the MoS2/SiO2 heterostructure is mainly due to the electronic coupling between S3p-Mo4d states forming the Mo-S covalent bond in the MoS2 layer. For the MoS2/graphene/SiO2 heterostructure, we identify, with the support of density functional calculations, new pathways that arise due to the high density of empty electronic states of the graphene conduction band. The latter makes the transfer process time in the MoS2/graphene/SiO2/Si twice as fast as in the MoS2/SiO2/Si sample. Our results show that ultrafast electron delocalization pathways in van der Waals heterostructures are dependent on the electronic properties of each involved 2D material, creating opportunities to modulate their transport properties.