Proteomics-Based Approach for Detailing the Allergenic Profile of Cannabis Chemotypes.

Allergic sensitization to cannabis is an emerging public health concern and is difficult to clinically establish owing to lack of standardized diagnostic approaches. Attempts to develop diagnostic tools were largely hampered by the Schedule I restrictions on cannabis, which limited accessibility for research. Recently, however, hemp was removed from the classified list, and increased accessibility to hemp allows for the evaluation of its practical clinical value for allergy diagnosis. We hypothesized that the proteomic profile is preserved across different cannabis chemotypes and that hemp would be an ideal source of plant material for clinical testing. Using a proteomics-based approach, we examined whether distinct varieties of cannabis plant contain relevant allergens of cannabis. Cannabis extracts were generated from high tetrahydrocannabinol variety (Mx), high cannabidiol variety (V1-19) and mixed profile variety (B5) using a Plant Total Protein Extraction Kit. Hemp extracts were generated using other standardized methods. Protein samples were subjected to nanoscale tandem mass spectrometry. Acquired peptides sequences were examined against the Cannabis sativa database to establish protein identity. Non-specific lipid transfer protein (Can s 3) level was measured using a recently developed ELISA 2.0 assay. Proteomic analysis identified 49 distinct potential allergens in protein extracts from all chemotypes. Most importantly, clinically relevant and validated allergens, such as profilin (Can s 2), Can s 3 and Bet v 1-domain-containing protein 10 (Can s 5), were identified in all chemotypes at label-free quantification (LFP) intensities > 106. However, the oxygen evolving enhancer protein 2 (Can s 4) was not detected in any of the protein samples. Similarly, Can s 2, Can s 3 and Can s 5 peptides were also detected in hemp protein extracts. The validation of these findings using the ELISA 2.0 assay indicated that hemp extract contains 30-37 ng of Can s 3 allergen per µg of total protein. Our proteomic studies indicate that relevant cannabis allergens are consistently expressed across distinct cannabis chemotypes. Further, hemp may serve as an ideal practical substitute for clinical testing, since it expresses most allergens relevant to cannabis sensitization, including the validated major allergen Can s 3.

Development and Validation of a GC-FID Method for the Quantitation of 20 Different Acidic and Neutral Cannabinoids.

For decades, Cannabis sativa had been illegal to sell or consume around the world, including in the United States. However, in light of the recent 2018 Farm Bill and the legalization of hemp across the US, various cannabis preparations have flooded the market, making it essential to be able to quantitate the levels of the different acidic and neutral cannabinoids in C. sativa and to have a complete cannabinoid profile of the different chemovars of the cannabis plant. A GC-FID method was developed and validated for the analysis of 20 acidic and neutral cannabinoids as trimethylsilyl (TMS) derivatives. The analyzed cannabinoids include cannabidivarinic acid (CBDVA), cannabidiolic acid (CBDA), cannabinolic acid (CBNA), cannabielsoic acid (CBEA), cannabicyclolic acid (CBLA), cannabichromenic acid (CBCA), trans-Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA), trans-Δ9-tetrahydrocannabinolic acid A (Δ9-THCAA), cannabigerolic acid (CBGA), cannabidiol (CBD), cannabicyclol (CBL), cannabidivarin (CBDV), trans-Δ9-tetrahydrocannabivarin (THCV), cannabichromene (CBC), trans-Δ8-tetrahydrocannabinol (Δ8-THC), trans-Δ9-tetrahydrocannabinol (Δ9-THC), cannabigerol (CBG), cannabinol (CBN), cannabicitran (CBT), and cannabielsoin (CBE). The method limit of detection (LOD) was as low as 0.1 µg/mL, while the limit of quantitation ranged from 0.25 µg/mL to 0.5 µg/mL. The precision (%RSD) was < 10%, while trueness ranged from 90 - 107%. The developed method is simple, accurate, and sensitive for the quantitation of all 20 acidic and neutral cannabinoids. Finally, the proposed method was successfully applied to the quantitation of the cannabinoids in different cannabis chemovars grown at the University of Mississippi.

Quantitative Determination of Cannabis Terpenes Using Gas Chromatography-Flame Ionization Detector.

Background: Cannabis has a long history of being credited with centuries of healing powers for millennia. The cannabis plant is a rich source of cannabinoids and terpenes. Each cannabis chemovar exhibits a different flavor and aroma, which are determined by its terpene content. Methods: In this study, a gas chromatography-flame ionization detector method was developed and validated for the determination of the 10 major terpenes in the main three chemovars of Cannabis sativa L. with n-tridecane used as the internal standard following the standard addition method. The 10 major terpenes (monoterpenes and sesquiterpenes) are α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was validated according to Association of Official Analytical Chemists guidelines. Spike recovery studies for all terpenes were carried out on placebo cannabis material and indoor-growing high THC chemovar with authentic standards. Results: The method was linear over the calibration range of 1-100 µg/mL with r2>0.99 for all terpenes. The limit of detection and limit of quantification were calculated to be 0.3 and 1.0 µg/mL, respectively, for all terpenes. The accuracy (%recovery) at all levels ranged from 89% to 104% and 90% to 111% for placebo and indoor-growing high THC chemovar, respectively. The repeatability and intermediate precision of the method were evaluated by the quantification of target terpenes in the three different C. sativa chemovars, resulting in acceptable relative standard deviations (less than 10%). Conclusions: The developed method is simple, sensitive, reproducible, and suitable for the detection and quantification of monoterpenes and sesquiterpenes in C. sativa biomass.

Propagation of Cannabis for Clinical Research: An Approach Towards a Modern Herbal Medicinal Products Development.

Cannabis has been reported to contain over 560 different compounds, out of which 120 are cannabinoids. Among the cannabinoids, Δ9-tetrahydrocannabinol and cannabidiol are the two major compounds with very different pharmacological profile and a tremendous therapeutic potential. However, there are many challenges in bringing cannabis from grow-farms to pharmaceuticals. Among many, one important challenge is to maintain the supply chain of biomass, which is consistent in its cannabinoids profile. To maintain this process, male plants are removed from growing fields as they appear. Even with that practice, still there are fair chances of cross fertilization. Therefore, controlled indoor cultivation for screening, selection of high yielding female plants based on their cannabinoids profile, and their conservation and multiplication using vegetative propagation and/or micropropagation is a suitable path to ensure consistency in biomass material. In this chapter, the botany and propagation of elite cannabis varieties will be discussed.

Analysis of Terpenes in Cannabis sativa L. Using GC/MS: Method Development, Validation, and Application.

Terpenes are the major components of the essential oils present in various Cannabis sativa L. varieties. These compounds are responsible for the distinctive aromas and flavors. Besides the quantification of the cannabinoids, determination of the terpenes in C. sativa strains could be of importance for the plant selection process. At the University of Mississippi, a GC-MS method has been developed and validated for the quantification of terpenes in cannabis plant material, viz., α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was optimized and fully validated according to AOAC (Association of Official Analytical Chemists) guidelines against reference standards of selected terpenes. Samples were prepared by extraction of the plant material with ethyl acetate containing n-tridecane solution (100 µg/mL) as the internal standard. The concentration-response relationship for all analyzed terpenes using the developed method was linear with r2 values > 0.99. The average recoveries for all terpenes in spiked indoor cultivated samples were between 95.0 - 105.7%, with the exception of terpinolene (67 - 70%). The measured repeatability and intermediate precisions (% relative standard deviation) in all varieties ranged from 0.32 to 8.47%. The limit of detection and limit of quantitation for all targeted terpenes were determined to be 0.25 and 0.75 µg/mL, respectively. The proposed method is highly selective, reliable, and accurate and has been applied to the simultaneous determination of these major terpenes in the C. sativa biomass produced by our facility at the University of Mississippi as well as in confiscated marijuana samples.

Cryopreservation of Shoot Tips of Elite Cultivars of Cannabis sativa L. by Droplet Vitrification.

Cannabis sativa L. (marijuana or hemp) is recognized worldwide for its psychoactive properties as well as for fiber production. This study focused on the evaluation of 3 droplet vitrification protocols for long-term conservation of shoot tips in liquid nitrogen (LN). Shoot tips (∼0.5 mm) were excised from 3- to 4-week-old in vitro-grown shoots of 3 cultivars (MX, VI-20, and B-5: high tetrahydrocannabinol [THC], high cannabidiol [CBD], and intermediate THC∼CBD, respectively) and pretreated on 5% dimethyl sulfoxide agar plates for 48 h. The shoot tips were then vitrified in LN using 3 separate cryoprotectant (plant vitrification solutions [PVS] #2, #3, and #4) droplets on an aluminum cryoplate. There was no significant difference between the regrowth of cryopreserved shoot tips exposed to PVS2 for 15 and 20 min, but regrowth of all 3 cultivars significantly declined after 20 min of exposure. Exposure duration of 15 min was adapted for subsequent experiments. Regrowth of cryopreserved MX was significantly higher with PVS2 (63%) than with PVS3 and PVS4 (≤5%). Regrowth of cryopreserved VI-20 was highest with PVS2 (57%) and significantly higher than with PVS3 and PVS4 (≤25%). The regrowth of cryopreserved shoot tips of B-5 was significantly different between all 3 protocols with PVS2 > PVS4 > PVS3. Both PVS2 and PVS4 produced regrowth above 55%, while regrowth with PVS3 was significantly lower (31%). These results indicate that 15-20 min of exposure to PVS2 are most suitable for cryopreservation of these varieties. This is the first report on protocol development for the cryopreservation of organized tissues of C. sativa L. for germplasm conservation.

Detection and Quantification of Cannabinoids in Extracts of Cannabis sativa Roots Using LC-MS/MS.

A liquid chromatography-tandem mass spectrometry single-laboratory validation was performed for the detection and quantification of the 10 major cannabinoids of cannabis, namely, (-)-trans-Δ9-tetrahydrocannabinol, cannabidiol, cannabigerol, cannabichromene, tetrahydrocannabivarian, cannabinol, (-)-trans-Δ8-tetrahydrocannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A, in the root extract of Cannabis sativa. Acetonitrile : methanol (80 : 20, v/v) was used for extraction; d3-cannabidiol and d3- tetrahydrocannabinol were used as the internal standards. All 10 cannabinoids showed a good regression relationship with r2 > 0.99. The validated method is simple, sensitive, and reproducible and is therefore suitable for the detection and quantification of these cannabinoids in extracts of cannabis roots. To our knowledge, this is the first report for the quantification of cannabinoids in cannabis roots.

Determination of Acid and Neutral Cannabinoids in Extracts of Different Strains of Cannabis sativa Using GC-FID.

Cannabis (Cannabis sativa L.) is an annual herbaceous plant that belongs to the family Cannabaceae. Trans-Δ9-tetrahydrocannabinol (Δ9-THC) and cannabidiol (CBD) are the two major phytocannabinoids accounting for over 40% of the cannabis plant extracts, depending on the variety. At the University of Mississippi, different strains of C. sativa, with different concentration ratios of CBD and Δ9-THC, have been tissue cultured via micropropagation and cultivated. A GC-FID method has been developed and validated for the qualitative and quantitative analysis of acid and neutral cannabinoids in C. sativa extracts. The method involves trimethyl silyl derivatization of the extracts. These cannabinoids include tetrahydrocannabivarian, CBD, cannabichromene, trans-Δ8-tetrahydrocannabinol, Δ9-THC, cannabigerol, cannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area ratio with R2 > 0.999 for all 10 cannabinoids. The precision and accuracy of the method were found to be ≤ 15% and ± 5%, respectively. The limit of detection range was 0.11 - 0.19 µg/mL, and the limit of quantitation was 0.34 - 0.56 µg/mL for all 10 cannabinoids. The developed method is simple, sensitive, reproducible, and suitable for the detection and quantitation of acidic and neutral cannabinoids in different extracts of cannabis varieties. The method was applied to the analysis of these cannabinoids in different parts of the micropropagated cannabis plants (buds, leaves, roots, and stems).

Cannabis cultivation: Methodological issues for obtaining medical-grade product.

As studies continue to reveal favorable findings for the use of cannabidiol in the management of childhood epilepsy syndromes and other disorders, best practices for the large-scale production of Cannabis are needed for timely product development and research purposes. The processes of two institutions with extensive experience in producing large-scale cannabidiol chemotype Cannabis crops-GW Pharmaceuticals and the University of Mississippi-are described, including breeding, indoor and outdoor growing, harvesting, and extraction methods. Such practices have yielded desirable outcomes in Cannabis breeding and production: GW Pharmaceuticals has a collection of chemotypes dominant in any one of eight cannabinoids, two of which-cannabidiol and cannabidivarin-are supporting epilepsy clinical trial research, whereas in addition to a germplasm bank of high-THC, high-CBD, and intermediate type cannabis varieties, the team at University of Mississippi has established an in vitro propagation protocol for cannabis with no detectable variations in morphologic, physiologic, biochemical, and genetic profiles as compared to the mother plants. Improvements in phytocannabinoid yields and growing efficiency are expected as research continues at these institutions. This article is part of a Special Issue entitled "Cannabinoids and Epilepsy".

In Vitro Propagation of Cannabis sativa L. and Evaluation of Regenerated Plants for Genetic Fidelity and Cannabinoids Content for Quality Assurance.

Cannabis sativa L. (Marijuana; Cannabaceae), one of the oldest medicinal plants in the world, has been used throughout history for fiber, food, as well as for its psychoactive properties. The dioecious and allogamous nature of C. sativa is the major constraint to maintain the consistency in chemical profile and overall efficacy if grown from seed. Therefore, the present optimized in vitro propagation protocol of the selected elite germplasm via direct organogenesis and quality assurance protocols using genetic and chemical profiling provide an ideal pathway for ensuring the efficacy of micropropagated Cannabis sativa germplasm. A high frequency shoot organogenesis of C. sativa was obtained from nodal segments in 0.5 µM thidiazuron medium and 95 % in vitro rhizogenesis is obtained on half-strength MS medium supplemented with 500 mg/L activated charcoal and 2.5 µM indole-3-butyric acid. Inter Simple Sequence Repeats (ISSR) and Gas Chromatography-Flame Ionization Detection (GC-FID) are successfully used to monitor the genetic stability in micropropagated plants up to 30 passages in culture and hardened in soil for 8 months.

Assessment of total phenolic and flavonoid content, antioxidant properties, and yield of aeroponically and conventionally grown leafy vegetables and fruit crops: a comparative study.

A comparison of the product yield, total phenolics, total flavonoids, and antioxidant properties was done in different leafy vegetables/herbs (basil, chard, parsley, and red kale) and fruit crops (bell pepper, cherry tomatoes, cucumber, and squash) grown in aeroponic growing systems (AG) and in the field (FG). An average increase of about 19%, 8%, 65%, 21%, 53%, 35%, 7%, and 50% in the yield was recorded for basil, chard, red kale, parsley, bell pepper, cherry tomatoes, cucumber, and squash, respectively, when grown in aeroponic systems, compared to that grown in the soil. Antioxidant properties of AG and FG crops were evaluated using 2,2-diphenyl-1-picrylhydrazyl (DDPH) and cellular antioxidant (CAA) assays. In general, the study shows that the plants grown in the aeroponic system had a higher yield and comparable phenolics, flavonoids, and antioxidant properties as compared to those grown in the soil.

Characterization of Cannabis sativa allergens.

BACKGROUND: Allergic sensitization to Cannabis sativa is rarely reported, but the increasing consumption of marijuana has resulted in an increase in the number of individuals who become sensitized. To date, little is known about the causal allergens associated with C sativa. OBJECTIVE: To characterize marijuana allergens in different components of the C sativa plant using serum IgE from marijuana sensitized patients. METHODS: Serum samples from 23 patients with a positive skin prick test result to a crude C sativa extract were evaluated. IgE reactivity was variable between patients and C sativa extracts. IgE reactivity to C sativa proteins in Western blots was heterogeneous and ranged from 10 to 70 kDa. Putative allergens derived from 2-dimensional gels were identified. RESULTS: Prominent IgE reactive bands included a 23-kDa oxygen-evolving enhancer protein 2 and a 50-kDa protein identified to be the photosynthetic enzyme ribulose-1,5-bisphosphate carboxylase/oxygenase. Additional proteins were identified in the proteomic analysis, including those from adenosine triphosphate synthase, glyceraldehyde-3-phosphate dehydrogenase, phosphoglycerate kinase, and luminal binding protein (heat shock protein 70), suggesting these proteins are potential allergens. Deglycosylation studies helped refine protein allergen identification and demonstrated significant IgE antibodies against plant oligosaccharides that could help explain cross-reactivity. CONCLUSION: Identification and characterization of allergens from C sativa may be helpful in further understanding allergic sensitization to this plant species.

Molecular analysis of genetic fidelity in Cannabis sativa L. plants grown from synthetic (encapsulated) seeds following in vitro storage.

The increasing utilization of synthetic (encapsulated) seeds for germplasm conservation and propagation necessitates the assessment of genetic stability of conserved propagules following their plantlet conversion. We have assessed the genetic stability of synthetic seeds of Cannabis sativa L. during in vitro multiplication and storage for 6 months at different growth conditions using inter simple sequence repeat (ISSR) DNA fingerprinting. Molecular analysis of randomly selected plants from each batch was conducted using 14 ISSR markers. Of the 14 primers tested, nine produced 40 distinct and reproducible bands. All the ISSR profiles from in vitro stored plants were monomorphic and comparable to the mother plant which confirms the genetic stability among the clones. GC analysis of six major cannabinoids [Δ(9)-tetrahydrocannabinol, tetrahydrocannabivarin, cannabidiol, cannabichromene, cannabigerol and cannabinol] showed homogeneity in the re-grown clones and the mother plant with insignificant differences in cannabinoids content, thereby confirming the stability of plants derived from synthetic seeds following 6 months storage.

Photosynthetic response of Cannabis sativa L., an important medicinal plant, to elevated levels of CO2.

The effect of elevated CO2 concentrations (545 and 700 µmol mol(-1)) on gas exchange and stomatal response of four high Δ(9)-THC yielding varieties of Cannabis sativa (HPM, K2, MX and W1) was studied to assess their response to the rising atmospheric CO2 concentration. In general, elevated CO2 concentration (700 µmol mol(-1)) significantly (p < 0.05) stimulated net photosynthesis (P N), water use efficiency (WUE) and internal CO2 concentration (C i), and suppressed transpiration (E) and stomatal conductance (g s) as compared to the ambient CO2 concentration (390 µmol mol(-1)) in all the varieties whereas, the effect of 545 µmol mol(-1) CO2 concentration was found insignificant (p < 0.05) on these parameters in most of the cases. No significant changes (p < 0.05) in the ratio of internal to the ambient CO2 concentration (C i/C a) was observed in these varieties under both the elevated CO2 concentrations (545 and 700 µmol mol(-1)). An average increase of about 48 %, 45 %, 44 % and 38 % in P N and, about 177 %, 157 %, 191 % and 182 % in WUE was observed due to elevated CO2 (700 µmol mol(-1)) as compared to ambient CO2 concentration in HPM, K2, MX and W1 varieties, respectively. The higher WUE under elevated CO2 conditions in Cannabis sativa, primarily because of decreased stomatal conductance and subsequently the transpiration rate, may enable this species to survive under expected harsh greenhouse effects including elevated CO2 concentration and drought conditions. The higher P N, WUE and nearly constant C i/C a ratio under elevated CO2 concentrations in this species reflect a close coordination between its stomatal and mesophyll functions.

Temperature response of photosynthesis in different drug and fiber varieties of Cannabis sativa L.

The temperature response on gas and water vapour exchange characteristics of three medicinal drug type (HP Mexican, MX and W1) and four industrial fiber type (Felinq 34, Kompolty, Zolo 11 and Zolo 15) varieties of Cannabis sativa, originally from different agro-climatic zones worldwide, were studied. Among the drug type varieties, optimum temperature for photosynthesis (Topt) was observed in the range of 30-35 °C in high potency Mexican HPM whereas, it was in the range of 25-30 °C in W1. A comparatively lower value (25 °C) for Topt was observed in MX. Among fiber type varieties, Topt was around 30 °C in Zolo 11 and Zolo 15 whereas, it was near 25 °C in Felinq 34 and Kompolty. Varieties having higher maximum photosynthesis (PN max) had higher chlorophyll content as compared to those having lower PN max. Differences in water use efficiency (WUE) were also observed within and among the drug and fiber type plants. However, differences became less pronounced at higher temperatures. Both stomatal and mesophyll components seem to be responsible for the temperature dependence of photosynthesis (PN) in this species, however, their magnitude varied with the variety. In general, a two fold increase in dark respiration with increase in temperature (from 20 °C to 40 °C) was observed in all the varieties. However, a greater increase was associated with the variety having higher rate of photosynthesis, indicating a strong association between photosynthetic and respiratory rates. The results provide a valuable indication regarding variations in temperature dependence of PN in different varieties of Cannabis sativa L.

Genetic identification of female Cannabis sativa plants at early developmental stage.

Sequence-characterized amplified region (SCAR) markers were used to identify female plants at an early developmental stage in four different varieties of Cannabis sativa. Using the cetyl trimethylammonium bromide (CTAB) method, DNA was isolated from two-week-old plants of three drug-type varieties (Terbag W1, Terbag K2, and Terbag MX) and one fiber-type variety (Terbag Fedora A7) of C. sativa grown under controlled environmental conditions through seeds. Attempts to use MADC2 (male-associated DNA from Cannabis sativa) primers as a marker to identify the sex of Cannabis sativa plants were successful. Amplification of genomic DNA using MADC2-F and MADC2-R primers produced two distinct fragments, one with a size of approximately 450 bp for female plants and one for male plants with a size of approximately 300 bp. After harvesting the tissues for DNA extraction, plants were subjected to a flowering photoperiod (i.e., 12-h light cycle), and the appearance of flowers was compared with the DNA analysis. The results of the molecular analysis were found to be concordant with the appearance of male or female flowers. The results of this study represent a quick and reliable technique for the identification of sex in Cannabis plants using SCAR markers at a very early developmental stage.

High frequency plant regeneration from leaf derived callus of high Δ9-tetrahydrocannabinol yielding Cannabis sativa L.

An efficient in vitro propagation protocol for rapidly producing Cannabis sativa plantlets from young leaf tissue was developed. Using gas chromatography-flame ionization detection (GC-FID), high THC yielding elite female clone of a drug-type CANNABIS variety (MX) was screened and its vegetatively propagated clones were used for micropropagation. Calli were induced from leaf explant on Murashige and Skoog medium supplemented with different concentrations (0.5, 1.0, 1.5, and 2.0 µM) of indole- 3-acetic acid (IAA), indole- 3- butyric acid (IBA), naphthalene acetic acid (NAA), and 2,4-dichlorophenoxy-acetic acid (2,4-D) in combination with 1.0 µM of thidiazuron (TDZ) for the production of callus. The optimum callus growth and maintenance was in 0.5 µM NAA plus 1.0 µM TDZ. The two-month-old calli were subcultured to MS media containing different concentrations of cytokinins (BAP, KN, TDZ). The rate of shoot induction and proliferation was highest in 0.5 µM TDZ. Of the various auxins (IAA, IBA, and NAA) tested, regenerated shoots rooted best on half strength MS medium (1/2 - MS) supplemented with 2.5 µM IBA. The rooted plantlets were successfully established in soil and grown to maturity with no gross variations in morphology and cannabinoids content at a survival rate of 95 % in the indoor growroom.

Assessment of cannabinoids content in micropropagated plants of Cannabis sativa and their comparison with conventionally propagated plants and mother plant during developmental stages of growth.

Gas chromatography-flame ionization detection (GC-FID) was used to assess the chemical profile and quantification of cannabinoids to identify the differences, if existing, in the chemical constituents of in vitro propagated plants (IVP), conventionally grown plants (VP) and indoor grown mother plants (MP-Indoor) of a high THC yielding variety of Cannabis sativa L. during different developmental stages of growth. In general, THC content in all groups increased with plant age up to a highest level during the budding stage where the THC content reached a plateau before the onset of senescence. The pattern of changes observed in the concentration of other cannabinoids content with plants age has followed a similar trend in all groups of plants. Qualitatively, cannabinoids profiles obtained using GC-FID, in MP-indoor, VP and IVP plants were found to be similar to each other and to that of the field grown mother plant (MP field) of C. sativa. Minor differences observed in cannabinoids concentration within and among the groups were not found to be statistically significant. Our results confirm the clonal fidelity of IVP plants of C. sativa and suggest that the biochemical mechanism used in this study to produce the micropropagated plants does not affect the metabolic content and can be used for the mass propagation of true to type plants of this species for commercial pharmaceutical use.

Assessment of the genetic stability of micropropagated plants of Cannabis sativa by ISSR markers.

Inter-simple sequence repeat (ISSR) markers were used to evaluate the genetic stability of the micropropagated plants of Cannabis sativa over 30 passages in culture and hardening in soil for 8 months. A total of 15 ISSR primers resulted in 115 distinct and reproducible bands. All the ISSR profiles from micropropagated plants were monomorphic and comparable to mother plants, confirming the genetic stability among clones and mother plants. Chemical analysis of cannabinoids, using gas chromatography/flame ionization detection (GC/FID), was done to further confirm whether the qualitative and quantitative differences in the major secondary metabolites exist between the mother plant and micropropagated plants. Six major cannabinoids - Delta(9)-THC, THCV, CBD, CBC, CBG, and CBN - were identified and compared with the mother plant. Our results clearly showed a similar cannabinoid profile and insignificant differences in THC content between the two types of plants. These results suggest that the micropropagation protocol developed by us for rapid IN VITRO multiplication is appropriate and applicable for clonal mass propagation of C. SATIVA.

The role of biotechnology in the production of the anticancer compound podophyllotoxin.

Podophyllotoxin is a plant-derived compound found in Podophyllum sp. that is used to produce semi-synthetic anticancer pharmaceuticals such as etoposide, teniposide, and etoposide phosphate. This chapter describes the role of biotechnology to produce podophyllotoxin and our attempts to domesticate Podophyllum peltatum L., also known as the American mayapple. The domestication research on mayapple included surveys of the natural population, identification of high yielding genotypes, propagation, cultivation, sustainable harvest procedures and the development of protocols for in vitro germplasm bank.