Sustainable Utilization of Mushroom By-Products Processed with a Combined Osmotic Dehydration Pretreatment and a Hot-Air-Drying Step.

Mushroom production and consumption are gaining increased interest due to their unique flavor and nutritional value. However, in the mushroom industry, large amounts of by-products are generated, which have a high negative environmental and economic impact. In this study, an osmotic dehydration process followed by hot-air-drying was applied to mushroom stems to produce dried mushrooms as the end product. The osmotic dehydration conditions (concentration of hypertonic solution, specifically, 10-30% maltodextrin and 20-40% oligofructose; a treatment time of 40-80 min; and a temperature range of 30-50 °C) were optimized using response surface methodology (RSM). The results showed that a four-factor three-level Box-Behnken experimental design was effectively implemented to evaluate the effect of the process parameters and identify the optimal osmotic dehydration conditions for producing osmotically dehydrated mushrooms. The main factor affecting mass transfer was the osmosis temperature, and the optimal conditions were found to be 38 °C, 40% oligofructose and 19.3% maltodextrin as the osmotic agents, and 80 min of immersion time. Moreover, the results showed that osmotic pretreatment, in the optimal conditions, significantly reduced the required drying time of the by-products compared to traditional hot-air-drying, especially at milder drying temperatures. Consequently, the required energy was also reduced by at least 40% at 50 °C.

Effect of the storage process on quality characteristics of hemp-enriched "tsoureki" a rich-dough baked Greek product.

The effects of the storage process on the quality characteristics of a hemp-enriched "tsoureki" (a rich-dough baked Greek product, rich-dough baked product [RDBP]) were investigated. The wheat flour was substituted with defatted hemp flour at selected ratios (0%-50% hemp:wheat flour). The baked products were stored at 25°C and at specific time intervals (0, 1, 4, 7, 10, and 14 days), and their properties were determined, including moisture content, water activity, structure, texture, color, total phenolic content (TPC), and antioxidant activity. Moreover, analyses of phenolic compounds were performed using quadrupole time of flight liquid chromatography-mass spectroscopy, identifying 14 compounds. Both the first-order kinetic model and modified Avrami equation, including the hemp-to-wheat ratio effect in the rate constant, well described the changes in the quality characteristics. The results showed that storage time and hemp incorporation significantly affected the quality of the product. Water activity decreased from 0.901 to 0.859, whereas moisture content decreased from 30.52%-32.33% (0 days) to 26.97%-27.02% w.b. (14 days) with storage time for all hemp additions. Hardness was greatly affected by hemp flour addition and approached 14.72 and 17.85 N after 14 days of storage for 30% and 50% substitutions, respectively. Springiness and cohesiveness decreased with hemp addition and storage time. The color difference of the hemp-enriched products compared to the control sample increased during storage. TPC increased due to the addition of hemp flour, whereas 14 compounds were identified. Based on property correlation, the hemp-enriched RDBP-tsoureki held its high-quality characteristics for 7 days of storage and contained a significant amount of bioactive compounds. PRACTICAL APPLICATION: Industrially produced, defatted hemp is a promising byproduct that can be used to nutritionally enhance baked goods. Modeling results can be used for the prediction of the properties that define product storage ability and also that the hemp-enriched, rich dough-baked Greek "tsoureki" could be produced while maintaining total phenolic content and antioxidant activity during 7 days of storage. These findings are expected to be used in the future in baked goods industry applications to produce goods with an improved nutritional profile.

Properties, Structure, and Acceptability of Innovative Legume-Based Biscuits with Alternative Sweeteners.

The effects of legume incorporation and sweetener substitution on the quality characteristics of innovative biscuits were investigated. The wheat flour was substituted with chickpea and lentil flour at ratios ranging from 0 to 30% legume to whole-meal dicoccum wheat flour. The sugar was substituted by oligofructose at 50 and 100% levels. The quality characteristics, including physicochemical properties (moisture content, water activity, and color), sorption characteristics, structural and textural properties, and sensory properties, were significantly affected by the substitutions. Sorption phenomena were excellently described by the Guggenheim, Anderson, and de Boer (GAB) model, while its parameters were affected by substitutions. Scanning electron microscopy revealed a porous structure with starch granules embedded within the protein matrix, showing restricted gelatinization and keeping largely their form. The incorporation of legume flour increased the biscuit density, hardness, and spread ratio and decreased the color of the products. Furthermore, principal component analysis (PCA) analysis of instrumental and sensory characteristics showed that texture and sweetness were the key quality characteristics for product acceptance. It was found that highly acceptable legume-based biscuits with alternative sweeteners can be produced, with 50% oligofructose substitution and legume flour incorporation (chickpea or lentil) up to 30%.

Utilization of industrial hemp by-product defatted seed flour: effect of its incorporation on the properties and quality characteristics of 'tsoureki', a rich-dough baked Greek product.

BACKGROUND: A rich-dough baked Greek product named 'tsoureki' was prepared using non-gluten hemp seed flour at ratios of 0:100, 10:90, 30:70, and 50:50. The effects of hemp flour addition on the properties of 'tsoureki', including physicochemical properties (moisture content, water activity, sorption phenomena), structural properties, textural properties, total phenolic content, antioxidant activity, and sensorial characteristics, as well as the macroscopic structure and morphological characteristics, were studied. RESULTS: Hemp flour addition affected dough rheology, showing tan δ values < 1, a decrease in both G' and G″ values, while both flow behavior and consistency indices were also significantly affected, which might have an influence on the final baked goods. The Guggenheim-Anderson-de Boer model satisfactorily described sorption data, while both hemp addition and temperature had a significant effect. A significantly higher hardness of 11.55 N, a lower specific volume of 2.65 cm3  g-1 , and a lower porosity of 0.676 were observed at high hemp additions. The hemp flour level influenced the color of the crumb and crust, and the total color difference (ΔE) increased significantly with the increase in hemp flour. Hemp flour additions were detectable by the naked eye, with an obvious color difference between control and hemp-containing samples. Moreover, the phenolic content and antioxidant capacity were increased, as were some organoleptic characteristics, such as the bitter aftertaste. Concurrently, overall acceptability decreased significantly. CONCLUSION: Overall, the incorporation of gluten-free defatted hemp seed flour in 'tsoureki' formulations seems to be a promising alternative for improving quality of such rich-dough baked products. © 2022 Society of Chemical Industry.

Food extrusion: An advanced process for innovation and novel product development.

Extrusion is a versatile process capable of producing a variety of new and novel foods and ingredients, thus increasing manufacturing opportunities. Further, it could provide nutritious, safe, sustainable, and affordable foods, especially directed at individualized consumer needs. In addition to past research efforts, more investigations should be conducted in order to refine, redesign, or develop new extrusion processing technologies. The present review highlights the current advances made in new and novel food product development by considering the extrusion process, the influencing parameters, and product characteristics and properties; the most promising extrusion processes that can be used in novel food product and ingredient development, such as extrusion cooking, hot-melt extrusion, reactive extrusion, and extrusion-based 3D printing; the possibilities of using various raw materials in relation to process and product development; and the needs for product development modeling along with extrusion process design and modeling. In correlation with extruded product development, topics that merit further investigation may include structure formation, plant and animal biopolymers functionalization, biopolymer reactions, process simulation, modeling and control, engineering and mechanical aspects of extruders, analysis of pre-processing treatments, as well as prototyping, risk analysis, safety, sensory and consumer acceptance.

Optimization of Osmotic Dehydration of Tomatoes in Solutions of Non-Conventional Sweeteners by Response Surface Methodology and Desirability Approach.

The osmotic dehydration (OD) of tomatoes in solutions of alternative sweeteners was investigated using Response Surface Methodology (RSM), while selected desirability functions were implemented in order to define the optimum process parameters (temperature/duration of osmotic treatment, osmotic solution composition and concentration). Mass exchange, color and texture were measured during the process. Changes in color occurred rapidly at the beginning of the process, while firmness was significantly increased, indicating that OD processing led to tomato texture improvement. Color and firmness changes were adequately modeled using a polynomial model. RSM coupled with desirability functions was applied to optimize OD procedure in terms of color retention and maximum solid gain, a requirement for candied products. A maximum desirability was obtained by incorporating oligofructose into the osmotic solution, at relatively short treatment times. Results were validated and sensory analysis was conducted at the optimized conditions to assess samples' organoleptic acceptance.

Phenolic Extracts from Wild Olive Leaves and Their Potential as Edible Oils Antioxidants.

The kinetics solid-liquid extraction of phenolics from wild olive leaves was elaborated using different mathematical models (Peleg, second order, Elovich, and power law model). As solvents, methanol, ethanol, ethanol:water 1:1, n-propanol, isopropanol and ethyl acetate were used. The second order model best described the solvent extraction process, followed by the Elovich model. The most effective solvent was ethanol with optimum phenol extraction conditions 180 min, solvent to sample ratio 5:1 v/w and pH 2. Ethanol extract exhibited the highest antiradical activity among solvent and supercritical fluid extraction (SFE) extracts, which in addition showed the highest antioxidant capacity compared to synthetic and natural food antioxidants such as BHT, ascorbyl palmitate and vitamin E. Antioxidant potential of SFE extract was quite high, although its phenolic potential was not. Leaf extracts were proven to be good protectors for olive and sunflower oils at levels of 150 ppm.

Aluminium in food and daily dietary intake estimate in Greece.

Aluminium content of foods, as well as dietary aluminium intake of the Greek adult population, was determined using graphite furnace atomic absorption spectroscopy after microwave sample digestion and food consumption data. Al content ranged from 0.02 to 741.2 mg kg⁻¹, with spices, high-spice foods, cereal products, vegetables and pulses found to be high in Al. Differences in aluminium content were found between different food classes from Greece and those from some other countries. Aluminium intake of Greeks is 3.7 mg/day based on DAFNE Food Availability Databank, which uses data from the Household Budget Surveys. On the other hand, according to the per capita food consumption data collected by both national and international organisations, Al intake is 6.4 mg day⁻¹. Greek adult population has an Al intake lower than the Provisional Tolerable Weekly Intake of 7 mg kg⁻¹ body weight established by EFSA. Cereals and vegetables are the main Al contributors, providing 72.4% of daily intake.